The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framewor...The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framework, in which the bulk MoOx phase is large enough to form typical mesoporous structure, is promising in terms of its advantages of both improved mechanical strength and high catalytic properties over the supported MoOx and bulk MoOx catalyst.展开更多
Solubilities of CO<sub>2</sub> in binary mixtures of n-decane-n-hexadecane and n-heptane-toluenewere measured in a glass apparatus by a synthetic method.Henry’s constants at several temperaturesand solven...Solubilities of CO<sub>2</sub> in binary mixtures of n-decane-n-hexadecane and n-heptane-toluenewere measured in a glass apparatus by a synthetic method.Henry’s constants at several temperaturesand solvent compositions were reported.While the Henry’s constants of CO<sub>2</sub> in mixtures of decaneand hexadecane can be satisfactorily predicted by a simple linear interpolation,prediction of Henry’sconstants for CO<sub>2</sub> in mixtures of heptane and toluene requires excess Gibbs energy of the solvent mix-tures.The standard thermodynamic functions of solution（ΔH<sup>0</sup>,ΔG<sup>0</sup>,and ΔS<sup>0</sup>）were reported.展开更多
Polyimide（PI） is a type of important membrane material. A soluble polymer was synthesized from 4,4′-（hexafluoroisopropylidene） diphthalic anhydride（6FDA） and 2,2-bis[4-（4-aminophenoxy） phenyl] hexafluoroprop...Polyimide（PI） is a type of important membrane material. A soluble polymer was synthesized from 4,4′-（hexafluoroisopropylidene） diphthalic anhydride（6FDA） and 2,2-bis[4-（4-aminophenoxy） phenyl] hexafluoropropane（BDAF） by the two-step polymerization method. The polymer was proved to be polyimide 6FDA-BDAF by the Fourier transform infrared（FT-IR）, the 1H-NMR and ^（19）F-NMR spectra. An asymmetric membrane was prepared with the synthesized polyimide 6FDA-BDAF, it was porous in the 50 μm height bulk and dense in a 3–5 μm height surface. The membrane was used to separate n-heptane/thiophene mixtures by pervaporation with sulfur（S） contents from 50 to 900 μg g^（–1）. The total flux was enlarged from 7.96 to 37.61 kg m^（–2） h^（–1） with temperature increasing from 50 to 90°C. The membrane＇s enrichments factor for thiophene were about 3.13 and dependent on the experimental conditions. The experimental results demonstrated that polyimide 6FDA-BDAF would be a potential membrane material for desulfurization and controlled release of the S-containing fertilizer.展开更多
The effect of iridium loading on the properties and catalytic isomerization of n-heptane over Ir-HZSM-5 is studied. Ir-HZSM-5 was prepared by impregnation method and subjected to isomerization process in the presence ...The effect of iridium loading on the properties and catalytic isomerization of n-heptane over Ir-HZSM-5 is studied. Ir-HZSM-5 was prepared by impregnation method and subjected to isomerization process in the presence of flowing hydrogen gas. XRD and BET studies show that the presence of iridium stabilizes the crystalline structure of HZSM-5, leading to more ordered framework structure and larger surface area. TGA and FTIR results substantiate that iridium species interacts with OH group on the surface of HZSM-5. Pyridine FT-IR study verifies the interaction between iridium and surface OH group slightly increased the Bro¨nsted and Lewis acid sites without changing the lattice structure of HZSM-5. The presence of iridium and the increase of strong Lewis acid sites on HZSM-5 were found to bring an increase about 4.1%, 33.2% and 11.8% in conversion, selectivity and yield of n-heptane isomerization, respectively.展开更多
For enhancing the activity of Ni/TiO2-SAPO-11 catalyst, SAPO-11, the precursor was prepared by hydrothermal crystallization, and TiO2-SAPO-11 complex carrier was prepared by sol-gel method, then Ni/TiO2-SAPO-11 was pr...For enhancing the activity of Ni/TiO2-SAPO-11 catalyst, SAPO-11, the precursor was prepared by hydrothermal crystallization, and TiO2-SAPO-11 complex carrier was prepared by sol-gel method, then Ni/TiO2-SAPO-11 was produced by the final product. The catalytic performance of Ni/TiO2-SAPO-11 was studied in n-heptane isomerization, and the impact of catalyst preparation conditions on n-heptane isomerization was discussed in detail. The results showed that, with 20% of TiO2 composition, 2% of Ni capacity percentage and calcined temperature at 500°C, conversion of n-heptane and isomerization selectivity was up to 40.94% and 88.97% respectively.展开更多
In this article,numerical simulations are performed to investigate the performance of the thermal diffusion column for the separation of n-heptane/benzene mixture.The present work tried to optimize column by analyzing...In this article,numerical simulations are performed to investigate the performance of the thermal diffusion column for the separation of n-heptane/benzene mixture.The present work tried to optimize column by analyzing significant parameters such as feed flow rate,temperature and cut.In order to obtain the hydrodynamic and temperature and mass distribution inside thermal diffusion column,computational fluid dynamic(CFD) method is applied to solve the Navier-Stocks equations.Numerical simulations are conducted to study the main parameters in both stationary and time-dependent conditions.By using the separation work unit as a function of cut,the optimal cut for maximum SWU occurs within a limited range of 0.47-0.5 for feed rate between 0.5 and 4 g min^-1.Our findings reveal that the optimum feed rate in the range of optimum cut is about 1 g min^-1.In transient study,results show that the best cut for reaching to steady-state condition is θ=0.5.展开更多
文摘The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framework, in which the bulk MoOx phase is large enough to form typical mesoporous structure, is promising in terms of its advantages of both improved mechanical strength and high catalytic properties over the supported MoOx and bulk MoOx catalyst.
文摘Solubilities of CO<sub>2</sub> in binary mixtures of n-decane-n-hexadecane and n-heptane-toluenewere measured in a glass apparatus by a synthetic method.Henry’s constants at several temperaturesand solvent compositions were reported.While the Henry’s constants of CO<sub>2</sub> in mixtures of decaneand hexadecane can be satisfactorily predicted by a simple linear interpolation,prediction of Henry’sconstants for CO<sub>2</sub> in mixtures of heptane and toluene requires excess Gibbs energy of the solvent mix-tures.The standard thermodynamic functions of solution（ΔH<sup>0</sup>,ΔG<sup>0</sup>,and ΔS<sup>0</sup>）were reported.
基金support from the Key Technology R&D Program of China(2011BAD11B05)the National Nonprofit Institute Research Grant of Chinese Academy of Agricultural Sciences(2011-28,2013-17)+3 种基金supported by the National Basic Research Program of China(973 Program,2003CB615701)the National Natural Science Foundation of China(20576059,20676067,31572204)the China Petroleum&Chemical Corporation(SINOPEC Foundation,X505002)the China National Petroleum Corporation(CNPC)InnovationFoundation(05051143)
文摘Polyimide（PI） is a type of important membrane material. A soluble polymer was synthesized from 4,4′-（hexafluoroisopropylidene） diphthalic anhydride（6FDA） and 2,2-bis[4-（4-aminophenoxy） phenyl] hexafluoropropane（BDAF） by the two-step polymerization method. The polymer was proved to be polyimide 6FDA-BDAF by the Fourier transform infrared（FT-IR）, the 1H-NMR and ^（19）F-NMR spectra. An asymmetric membrane was prepared with the synthesized polyimide 6FDA-BDAF, it was porous in the 50 μm height bulk and dense in a 3–5 μm height surface. The membrane was used to separate n-heptane/thiophene mixtures by pervaporation with sulfur（S） contents from 50 to 900 μg g^（–1）. The total flux was enlarged from 7.96 to 37.61 kg m^（–2） h^（–1） with temperature increasing from 50 to 90°C. The membrane＇s enrichments factor for thiophene were about 3.13 and dependent on the experimental conditions. The experimental results demonstrated that polyimide 6FDA-BDAF would be a potential membrane material for desulfurization and controlled release of the S-containing fertilizer.
基金supported by the Ministry of Science,Technology and Innovation,Malaysia through E-Science Fund Research Project(No.03-01-06-SF0564 and 03-01-06-SF0289)the Hitachi Scholarship Foundation for the Gas Chromatograph Instrument Grant
文摘The effect of iridium loading on the properties and catalytic isomerization of n-heptane over Ir-HZSM-5 is studied. Ir-HZSM-5 was prepared by impregnation method and subjected to isomerization process in the presence of flowing hydrogen gas. XRD and BET studies show that the presence of iridium stabilizes the crystalline structure of HZSM-5, leading to more ordered framework structure and larger surface area. TGA and FTIR results substantiate that iridium species interacts with OH group on the surface of HZSM-5. Pyridine FT-IR study verifies the interaction between iridium and surface OH group slightly increased the Bro¨nsted and Lewis acid sites without changing the lattice structure of HZSM-5. The presence of iridium and the increase of strong Lewis acid sites on HZSM-5 were found to bring an increase about 4.1%, 33.2% and 11.8% in conversion, selectivity and yield of n-heptane isomerization, respectively.
文摘For enhancing the activity of Ni/TiO2-SAPO-11 catalyst, SAPO-11, the precursor was prepared by hydrothermal crystallization, and TiO2-SAPO-11 complex carrier was prepared by sol-gel method, then Ni/TiO2-SAPO-11 was produced by the final product. The catalytic performance of Ni/TiO2-SAPO-11 was studied in n-heptane isomerization, and the impact of catalyst preparation conditions on n-heptane isomerization was discussed in detail. The results showed that, with 20% of TiO2 composition, 2% of Ni capacity percentage and calcined temperature at 500°C, conversion of n-heptane and isomerization selectivity was up to 40.94% and 88.97% respectively.
文摘In this article,numerical simulations are performed to investigate the performance of the thermal diffusion column for the separation of n-heptane/benzene mixture.The present work tried to optimize column by analyzing significant parameters such as feed flow rate,temperature and cut.In order to obtain the hydrodynamic and temperature and mass distribution inside thermal diffusion column,computational fluid dynamic(CFD) method is applied to solve the Navier-Stocks equations.Numerical simulations are conducted to study the main parameters in both stationary and time-dependent conditions.By using the separation work unit as a function of cut,the optimal cut for maximum SWU occurs within a limited range of 0.47-0.5 for feed rate between 0.5 and 4 g min^-1.Our findings reveal that the optimum feed rate in the range of optimum cut is about 1 g min^-1.In transient study,results show that the best cut for reaching to steady-state condition is θ=0.5.
