MEASUREMENT AND CORRELATION OF PARTITION COEFFICIENTS OF UROKINASE IN AQUEOUS TWO-PHASE PEG-POTASSIUM PHOSPHATE SYSTEM

Partition coefficients of Urokinase(UK)were measured in aqueous two-phase systems con-taining polyethylene glycol and potassium phosphate at 273.2K.Based on the Diamond-Hsu model,a modified expression was obtained for the correlation of enzyme partitioning in theabove-mentioned systems.Utilizing a modified form,the partitioning data of UK and heteroproteinwere correlated.The results show that the modified model is simple gives good precision.and will fa-cilitate engineering scale-up of aqueous two-phase systems for certain proteins purification.

Effect of partition coefficient on microsegregation during solidification of aluminium alloys

In the modeling of microsegregation, the partition coefficient is usually calculated using data from the equilibrium phase diagrams. The aim of this study was to experimentally and theoretically analyze the partition coefficient in binary aluminum--copper alloys. The sam- ples were analyzed by differential thermal analysis （DTA）, which were melted and quenched from different temperatures during solidifica- tion. The mass fraction and composition of phases were measured by image processing and scanning electron microscopy （SEM） equipped with an energy-dispersive X-ray spectroscopy （EDS） unit. These data were used to calculate as the experimental partition coefficients with four different methods. The experimental and equilibrium partition coefficients were used to model the concentration profile in the primary phase. The modeling results show that the profiles calculated by the experimental partition coefficients are more consistent with the experi- mental profiles, compared to those calculated using the equilibrium partition coefficients.

Structural Characterization and Octanol/water Partition Coefficients(LogP) Prediction for Oxygen-containing Organic Compounds

New descriptors were constructed and structures of some oxygen-containing organic compounds were parameterized. The multiple linear regression（MLR） and partial least squares regression（PLS） methods were employed to build two relationship models between the structures and octanol/water partition coefficients（LogP） of the compounds. The modeling correlation coefficients（R） were 0.976 and 0.922, and the ＂leave one out＂ cross validation correlation coefficients（R（CV）） were 0.973 and 0.909, respectively. The results showed that the structural descriptors could well characterize the molecular structures of the compounds; the stability and predictive power of the models were good.

Experimental and QSPR Studies on n-Octanol/water Partition Coefficient (lgK_(ow)) of Substituted Aniline

The n-octanol/water partition coefficients （lgKow） of 18 substituted anilines were determined at 25 ℃ by shake-flask method. The geometrical optimization of substituted anilines has been performed at B3LYP/6-311G^＊＊ level with Gaussian98 program, and the molecular surface areas of substituted anilines were calculated using ChemOffice 2004 program. The calculated structural parameters of substituted anilines were used as theoretical descriptors and the two-parameter （molecular surface area （MA） and the energy of the highest occupied molecular orbital （EaoMo）） quantitative structure-property relationship （QSPR） model of lgKow for substituted aniline with molecular structural parameters was developed by multi-linear regression method. The regression coefficient square （r^2） is 0.990 and the standard deviation SE 0.109. The model was validated by variance inflation factors （VIF） and t-test, and the results show that there exists small self-correlation between variables of the model with perfect stability. The model gives results in good qualitative agreement with experimental data. At last, the model was applied to predict lgKow values of five substituted anilines whose lgKow values have not been determined experimentally.

DFT and Position of Cl Substitution (PCS) Methods Studies on n-Octanol/water Partition Coefficients (lgK_(ow)) and Aqueous Solubility (–lgS_w) of All PCDD Congeners

Optimized calculations of 75 PCDDs and their parent DD were carded out at the B3LYP/6-31G＊ level by density functional theory （DFT） method. The structural parameters were obtained and significant correlation between the C1 substitution position and some structural parameters was found. Consequently, the number of C1 substitution positions was taken as theoretical descriptors to establish two novel QSPR models for predicting lgKow and -lgSw of all PCDD congeners. The two models achieved in this work contain two variables （Na and Nβ）, of which r = 0.9312, 0.9965 and SD = 0.27, 0.12 respectively, and t values are all large. The variation inflation factors （VIF） of variables in the two models herein are both less than 5.0, suggesting high accuracy of the lgKow and -lgSw predicting models, and the results of cross-validation test also show that the two models exhibit optimum stability and good predictive power. By comparison, the correlation and predictive ability of the present work are more advantageous than those obtained using semi-empirical AM1 and GC-RI methods.

The influence of fractionation of REE-enriched minerals on the zircon partition coefficients

Zircon is widely used to simulate melt generation,migration and evolution within the crust and mantle.The achievable performance of melt modelling generally depends on the availability of reliable trace element partition coefficients(D).However,a large range of D_(REE) values for zircon from natural samples and experimental studies has been reported,with values spanning up to 3 orders of magnitude.Unfortunately,a gap of knowledge on this variability is evident.In this study we model the crystallization processes of common REE-bearing minerals from granitic melts and show that the measured zircon D_(REE) would be elevated if there is crystallization of REE-enriched minerals subsequent to zircon.Nevertheless,compared to zircon D_(REE) values measured from experimental studies,this mechanism appears to have a less significant influence on those from natural granite samples since the quantity of crystallized REE-enriched minerals is very low in natural magmatic systems and/or most of them crystallize prior to zircon.Combined with recently published studies,this work supports that analysis of natural zircon/host groundmass pairs provides more robust D_(REE) values applicable to natural systems than those measured from experimental studies,which can be used to constrain the provenance of detrital zircons.

QSPR of n-Octanol/water Partition Coefficient (lgK_(ow)) for Alkyl(1-phenylsulfonyl) Cycloalkane-carboxylates

Quantum chemistry parameters of 28 alkyl（1-phenylsulfonyl） cycloalkane-carboxy-lates were computed at the 6-31G＊ level in fully optimal manner using B3LYP method of density functional theory （DFT）. With GQSARF2.0 program, the correlation equations that can predict n-octanol/water partition coefficient （lgKow） were developed using the structural and thermodynamic parameters of 28 alkyl（1-phenylsulfonyl） cycloalkane-carboxylates with experimental data of lgKow as theoretical descriptors; the correlation coefficient （R^2） was 0.9452 and the cross-validation squared correlation coefficient （Rcv^2） 0.9312. Furthermore, a four-variable model from MEDV was obtained, of which R2 = 0.9497 and Rov^2 =0.9388. The models were validated by variance inflation factor （VIF） and t-test. Cross-validation indicates that the correlation and predicting ability of the model based on both DFT method and MEDV are more advantageous than those obtained from semi-empirical AM1 method.

Determination of Teicoplanin A2's Partition Coefficient in Different Liquid-Liquid Extraction Systems

Teicoplanin is one of the macrocyclic glycopeptide antibiotics, which is active against Gram-positive bacteria, and has attracted a lot of attention in the field of chiral separation recently. In this work, the partition coefficients and extraction ratio of teicoplanin in three different solvent systems were studied: conventional extraction, reactive extraction and reverse micelle extraction. With conventional solvent extraction, n-butanol demonstrated high partition coefficient for teicoplanin, but low extraction ratio because of its high solubility in water. Reactive extraction of teicoplanin showed the highest partition coefficient with almost 100% recovery in organic phase when tri-n-octylmethyl ammonium chloride (TOMAC) was used as extractant and pH value was above 5.0. A reverse micelle system, consisted of isooctane +10mmol-L-1 TOMAC +1% n-octanol, also offered high separation factor for teicoplanin. The results are beneficial for the design of teicoplanin separation and purification process.

Studies of n-Octanol/water Partition Coefficients (lgK_(ow)) for Organophosphate Compounds by Density Functional Theory

Optimized calculation of 35 dialkyl phenyl phosphate compounds （OPs） was carded out at the B3LYP/6-31G^＊ level in Gaussian 98 program. Based on the theoretical linear solvation energy relationship （TLSER） model, the obtained parameters were taken as theoretical descriptors to establish the novel QSPR model for predicting n-octanol/water partition coefficients （lgKow） of OPs. The new model achieved in this work contains three variables, i.e., molecular volume （Vm）, dipole moment of the molecules （μ） and enthalpy （H^0）. For this model, R^2 = 0.9167 and SD = 0.31 at large t values. In addition, the variation inflation factors （VIF） of variables are all close to 1.0, suggesting high accuracy of the predicting model. And the results of cross-validation test （q^2 = 0.8993） and method validation also showed the model of this study exhibited optimum stability and better predictive power than that from semi-empirical method. The model achieved can be used to predict IgKow of congeneric compounds.

Estimation of Octanol-Water Partition Coefficient of Chloride Hydrocarbon by Group Contribution Method

A novel method named two-level group contribution （GC-K） method for the estimation of octanol-water partition coefficient （Kow） of chloride hydrocarbon is presented. The equation includes only normal boiling points and molecular weight of compounds. Group contribution parameters of 12 first-level groups and 7 second-level groups for Kow are obtained by correlating experimental data of three types including 57 compounds. By comparing the estimation results of the first-level with that of the two-level groups, it was observed that the latter is better with the addition of the modification of proximity effects. When compared with Marrero＇s three-level group contribution approach and atom-fragment contribution method （AFC）, the accuracy of the average relative error of GC-K by first-level groups is 7.20% and is preferred to other methods.

Measurement and Correlation of Partition Coefficients of Baicalin in EOPO/Salt Aqueous Two-Phase Systems

The partition coefficients of baicalin were measured in ethylene oxide and propylene oxide (EOPO)/salt aqueous two-phase systems at 298.15K. It was found that most of baicalin partitioned into EOPO-rich phase. The partition coefficients of baicalin varied from 10 to 120. The effect of various factors, including tie-line length, salt composition, molecular weight of EOPO, and solution pH, on the partition behavior was investigated in EOPO/salt systems. Furthermore the partition coefficients of baicalin were correlated using the modified Diamond-Hsu model. Good agreement with experimental data is obtained. The average relative deviations are less than 5.0%.

An experimental determination of W,Nb,and Ta partition coefficients between P-rich peraluminous granitic melt and coexisting aqueous fluid

The partition coefficients of W,Nb,and Ta between the P-rich peraluminous granitic melt and the coexisting aqueous fluid were determined at 800-850 °C and 0.5-1.5 kbar.The experimental results showed that the partition coefficients D_w,D_(Nb) and D_(Ta)(D_i^(v/m) = C_i^V/C_i^m,where C_i^V and C_i^m denote the concentrations of an element,i,in the aqueous fluid and the melt,respectively) were less than 0.1.All partition coefficients were affected by pressure,but there was no evidence for the complexation of P2O5 with these elements in the granitic melt or aqueous fluid,except for with W in the fluid.The results showed that W,Nb,and Ta tended to partition into the granitic melt and,in the late period of crystallization of P-rich magma,they formed independent minerals.

Determination and Correlation of 1-Octanol/Water Partition Coefficients for Six Quinolones from 293.15 K to 323.15 K

A shake-flask method was used to determine 1-octanol/water partition coefficients of ofloxacin, norfloxacin, lomefloxacin, ciprofloxacin, pefloxacin and pipemidic acid from 293.15 K to 323.15 K. The results show that 1-octanol/water partition coefficient of each quinolone increased with the increase of temperature. Based on the fluid phase equilibrium theory, the thermodynamic relationship of 1-octanol/water partition coefficient depending on the temperature was proposed, and the changes of enthalpy, entropy, and Gibbs free energy for quinolones partitioning in 1-octanol/water were determined, respectively. Quinolones molecules partitioning in 1-octanol/water was mainly an entropy driving process, during which the order degree of system decreased. The temperature effects of 1-octanol/water partition coefficient were investigated. The results show that its magnitude is the same as the values in the literature.

QSPR Study on Octanol/water Partition Coefficient (lgK_(ow)) of Substituted Naphthalin Compounds

Structural parameters of 24 substituted naphthalin compounds were computed at four levels using Hartree-Fock and DFT methods. Based on the experimental data of octanol/water partition coefficient （lgKow）, three-parameter （energy of the highest occupied molecular orbital （EHOMO）, the most positive, atomic net charges of molecule （q^＋） and molecular average polarizability （α）） dependent equations were developed using structural parameters as theoretical descriptors. Especially, lgKow dependent equation calculated at the HF/6-311G^＊＊ level is more advantageous than others in view of their correlation and predictive abilities. This dependent equation was validated by variance inflation factors （VIF） and t-test methods and used to predict lgKow of eight designed compounds. Upon comparison, the predictive abilities of our work are all more advantageous than those calculated from molecular property calculator program.

Coprecipitation of metal ions into calcite: an estimation of partition coefficients based on field investigation

Trace elements(and their isotopes)in carbonates are commonly used to reconstruct paleoenvironment and paleoclimate.Understanding the processes and mechanisms of element incorporation into carbonates is thus crucial for using such geochemical parameters as paleoclimate proxies.In contrast to laboratory-based experimental results,the partitioning of trace metals between solid and solution phases in natural carbonate precipitation systems has rarely been reported.In this study,we investigated the partition coefficients of metal ions between solid and solution in the channel of the natural Baishuitai travertine system,Yunnan,China.Our results show that the partition coefficients of Li+,Na+,Mg2+,Sr2+and Ba2+are<1,that of Ni2+is approximately 1,and those of Co2+,Mn2+,Zn2+and Cu2+are>1,consistent with the results found in previous experimental studies.Although the substitution for Ca2+is likely the main uptake process of these metals into calcite,depending on their ionic radius and charge,trace elements may also be incorporated by adsorption or physical entrapment.Our study shows that unlike laboratory experiments performed under specific conditions,the partitioning of metals between two phases in the natural travertine system could be controlled by several,even multiple,environmental factors(e.g.,carbonate deposition rate,temperature,and pH),which should be taken into account when using trace metals(and their isotopes)in carbonate archives as a paleoclimate proxy.

QSPR Studies on the Octanol/water Partition Coefficient (lgK_(ow)) of Substituted Anilines with 2D and 3D Methods

Octanol/water partition coefficient （Kow） is a crucial property for evaluating the environmental behavior and fate of organic compound. Herein, some quantitative structure-property relationship （QSPR） studies were performed to estimate and predict the lgK ow of substituted anilines. 2D method （multiple linear regression, MLR） and 3D method （comparative molecular field analysis, CoMFA） were applied in this study. Successful 2D and 3D models yielded the correlation coefficient （R2） values of 0.981 and 0.966 and the Leave-One-Out （LOO） cross-validated correlation coefficient （q2） values of 0.933 and 0.820, respectively. The developed models have a highly predictive ability in both internal and external validation. In addition, the results were interpreted in terms of physical and chemical meanings of descriptors and field contribution maps. It showed that the steric and electrostatic properties are the primary factors that govern the lgK ow of substituted anilines. The information obtained from the QSPR models would be helpful to the interpretation of structural features pertinent to the lgK ow of substituted anilines, which may be helpful in estimating the organic compounds＇ potential harm to the environment.

Partitioning Behavior of Gemifloxacin in Anionic, Cationic and Nonanionic Surfactants. Calculation of Dermal Permeability Coefficient

Transdermal delivery acts as an alternative to oral delivery of drugs and possibly provids also an alternative to hypodermic injection. Transdermal delivery when compared to oral route has a variety of advantages namely: avoiding the degradation of drugs in the stomach environment, providing steady plasma levels, avoiding first-pass metabolism, increaseing patient compliance, easy to use, non-invasive and inexpensive, increasing the therapeutic index with a simultaneous decrease in drug side effects. Despite these advantages, one of the greatest challenges to transdermal delivery is that only a limited number of drugs are amenable to administration by this route. Gemifloxacin, a broad spectrum fourth generation quinolone antibacterial agent has pharmacokinetic characteristics (particularly its low maximum plasma concentration, obtained following repeat oral dose of 320 mg) that makes it a potential target for transdermal delivery. The objective of the study was to explore the possibility of surfactants (anionic, cationic and nonionic) acting as dermal enhancers of gemifloxacin assuming that the drug is to be formulated into topical or transdermal pharmaceutical dosage form. To accomplish the objective, gemifloxacin was partitioned between chloroform and surfactants containing varying concentrations of sodium lauryl sulfate, cetyltrimethylammonium bromide, polysorbate-20 and polysorbate-80. The data obtained were used to estimate the dermal permeability coefficient. The partitioning was carried out by shake flask method at room temperature. It was observed that all the surfactants decreased the partition behavior of gemifloxacin when compared to that of water alone. Sodium lauryl sulfate produced the most decreasing partition effect at the highest concentration studied (2% w/v). The permeability coefficient (Kp) was estimated from the partition coefficient data and the molecular weight of the drug. As permeability coefficient is an important descriptor for evaluating dermal absorption of drugs employed in clinical treatment of various dermal accessible ailments, the results of the study suggest that the investigated surfactants might not be potential transdermal enhancers of gemifloxacin.

Calculation and application of partition coefficients of light hydrocarbons in oil-based mud system

To find out the relationship between the oil-based mud,the formation fluid and the extracted gas,we use a thermodynamic approach based on static headspace gas chromatography technique to calculate the partition coefficients of 47 kinds of light hydrocarbons compounds between nC5 and nC8 in two kinds of oil-based mud-air systems,and reconstruct the original formation fluid composition under thermodynamic equilibrium.The oil-based drilling mud has little effect on the formation fluid compositions in the range of nC5-nC8(less than 1%for low-toxicity oil-based mud and less than 10%for oil-based mud).For most light hydrocarbon compositions,the partition coefficients obtained by vapor phase calibration and the direct quantitative methods have errors of less than 10%,and the partition coefficients obtained by direct quantitative method are more accurate.The reconstructed compositions of the two kinds of crude oil have match degrees of 91%and 89%with their real compositions,proving the feasibility and accuracy of reconstructing the composition of original formation fluid by using partition coefficients of light hydrocarbon compositions between nC5 and nC8.

Estimation of Partition Coefficients of Fe-S Protein Models： Se Substitutions in Fe4S4Cysn

The SCAP method allows a semiquantitative estimation of the partitioning of many solutes between numerous pairs of solvents. The organic solvent-water partition coefficients P are calculated. For FeaS4Cysn, the organic solvent-water partition coefficients for l-octanol Po, cyclohexane Pch and chloroform Pcf decay 4.46, 6.25 and 4.60 log units per Cys, respectively. The Po is of the same order of magnitude as CDHI （conformationally dependent hydrophobic index） calculations and Pch-cf as computations performed with a method by Leo and Hansch. The logPo-ch-cf mean relative errors are 17%, 25% and-17%, which represent mean and unsigned relative errors of -3% and 20%. On varying the number of Cys, the structures show hydrophobic moments indicative of amphipathic compounds. For Se substitutions in Fe4SeaCys,, Po-ch-cf drop 4.52, 6.30 and 4.66 exponents per Cys. With the reference calculations, Po-ch-cf decay 4.03, 4.80 and 5.76 exponents per Cys. For FeaS4 mSemCys4, the calculated similar partition coefficients and hydrophobic moments, and lower distance in dendrogram suggest a role of Fe-Se clusters in physiological processes. The analysis is extended to lysozyme and its secondary structures.

On the potential of using ensemble learning algorithm to approach the partitioning coefficient(k)value in Scheil-Gulliver equation

The Scheil-Gulliver equation is essential for assessing solid fractions during alloy solidification in materials science.Despite the prevalent use of the Calculation of Phase Diagrams(CALPHAD)method,its computational intensity and time are limiting the simulation efficiency.Recently,Artificial Intelligence has emerged as a potent tool in materials science,offering robust and reliable predictive modeling capabilities.This study introduces an ensemble-based method that has the potential to enhance the prediction of the partitioning coefficient(k)in the Scheil equation by inputting various alloy compositions.The findings demonstrate that this approach can predict the temperature and solid fraction at the eutectic temperature with an accuracy exceeding 90%,while the accuracy for k prediction surpasses 70%.Additionally,a case study on a commercial alloy revealed that the model's predictions are within a 5℃deviation from experimental results,and the predicted solid fraction at the eutectic temperature is within a 15%difference of the values obtained from the CALPHAD model.