Preparation,Characterization of Dawson-type Heteropoly Acid Cerium（Ⅲ） Salt and Its Catalytic Performance on the Synthesis of n-Butyl Acetate

A novel cerium(Ⅲ) salt of Dawson type tungstophosphoric acid(Ce2P2W18O62·16H2O) was prepared by doping cerous nitrate in H6P2W18O62·13H2O powder and characterized by thermogravimetry and differential thermal analyses(TG/DTA),Fourier transform infrared spectroscopy(FT-IR),X-ray powder diffraction(XRD),pyridine infrared spectroscopy(Py-IR) and scanning electron microscopy(SEM).Its catalytic activity was evaluated by the probe reaction of synthesis of n-butyl acetate with acetic acid and n-butanol.The effects of various parameters such as molar ratio of n-butanol to acetic acid,reaction temperature,reaction time,and catalyst amount have been studied by single factor experiment.The results show that Ce2P2W18O62·16H2O behaved as an excellent heterogeneous catalyst in the synthesis of n-butyl acetate.The optimum synthetic conditions were determined as follows︰molar ratio of n-butanol to acetic acid at 2.0︰1.0,mass of the catalyst being 1.44% of the total reaction mixture,reaction temperature of 120 ℃ and reaction time of 150 min.Under above conditions,the conversion of acetic acid was above 97.8%.The selectivity of n-butyl acetate based on acetic acid was,in all cases,nearly 100%.The catalysts could be recycled and still exhibited high catalytic activity with 90.4% conversion after five cycles of reaction.It was found by means of TG-DTA and Py-IR that the catalyst deactivation was due to the adsorption of a complex of by-product on the active sites on catalysts surface or the catalyst loss in its separation from the products.Compared with using sulfuric acid as catalyst,the present procedure with Ce2P2W18O62·16H2O is a green productive technology due to simple process,higher yield,catalyst recycling and no corrosion for the production facilities.

Reactive Distillation for Producing n-Butyl Acetate:Experiment and Simulation

In this paper, a reactive distillation (RD) column was applied for synthesis n-butyl acetate from n-butanol and acetic acid. The Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetic model and an equilibrium stage model for separation were employed to study the RD process. The results obtained from the equilibrium stage model agreed well with the experiments. The effects of operating variables on the n-butanol conversion and n-butyl acetate purity were further investigated. The optimal column configuration for the production of n-butyl acetate was designed with 5 rectifying stages, 8 reaction stages and 13 stripping stages by the simulation study. According to the simulation results, n-butanol conversion and n-butyl acetate purity all reached greater than 96%.

Vapor-Liquid Equilibria for Dimethyl Carbonate-n-Butyl Acetate Binary System at 101.325kPa

The vapor-liquid equilibrium (VLE) data for the dimethyl carbonate-n-butyl acetate binary system were measured by an Ellis equilibrated distillator. The experimental data were checked for their thermodynamic consistency through statistical methods. The VLE data was correlated with Wilson and NRTL activity coefficient models and also with the calculation of the vapor phase fugacity coefficient by the modified Peng-Robinson equation of state.

Reactive dividing-wall column for the co-production of ethyl acetate and n-butyl acetate

Reactive dividing-wall column(RDWC) technology plays a critical role in the energy saving and high efficiency of chemical process.In this article, the process of co-producing ethyl acetate(EA) and n-butyl acetate(BA) with RDWC was studied.BA was not only the product, but also acted as entrainer to remove the water generated by the two esterification reactions.Experiments and simulations of the co-production process were carried out.It was found that the experimental results were in good agreement with the simulation results.Two kinds of RDWC structures(RDWC-FC and RDWC-RS) were proposed, and the co-production process operating parameters of the two types of RDWC were optimized by Aspen Plus respectively.The optimal operating parameters of the RDWC-FC were determined as follows: 0.6 of the reflux ratio of aqueous phase(RR), 0.66 of the vapor split(R_V) and 0.51 of the liquid split(R_L).And the optimal operating parameters of the RDWC-RS were shown as follows: RR was 0.295 and R_V was 0.61.Furthermore, the energy saving analysis of the co-production process was based on the annual output of 10000 tons of EA, compared with the traditional reaction distillation(RD) to prepare EA and BA, the reboiler duty of the RDWC-FC column could save 20.4%, TAC saving 23.6%; RDWC-RS reboiler energy consumption could save 17.0%, TAC 22.2%.

Synthesis of n-Butyl Acetate by Silica Loaded Cerous Sulfate Catalyst

Silica was used, as a catalyst carrier, to load cerous sulfate for catalyzing the synthesis of n-butyl acetate. The main purpose of this research was to explore the feasibility of silica in improving the decentrality and activity of the catalyst. The effects of molar ratio of butyl alcohol to acetic acid, the cerous sulfate loadings and the reaction time on the conversion of acetic acid were studied by single factor experiment method and orthogonal experiment method respectively. The refractive index (n20D) and molecular structure of the prepared n-butyl acetate were measured by Abbe Raefractometer and Fourier Transform Infrared spectroscope, respectively. The comparisons of the silica loaded and unloaded catalysts for catalyzing the synthesis of n-butyl acetate were made. The results showed that the suitable conditions for synthesizing n-butyl acetate were: molar ratio of butyl alcohol to acetic acid of 1.4∶1, use level of loaded cerous sulfate of 0.30 g and reaction time of 50 min, respectively. The maximum conversion of acetic acid for the silica loaded catalyst reached 98.62% which was 12.32% and 16.43% higher than those for the unloaded catalysts reported in literatures, but the use level of cerous sulfate for the former was much less than those for the latters under similar optimal technical conditions. The silica was proved to be a good catalyst carrier for enhancing decentrality and activity of the catalyst and increasing the conversion of acetic acid. The repentance of the silica loaded cerous sulfate was also investigated in the experiment.

Synthesis of n-Butyl Acetate by Microwave Irradiation Under the Assistance of Solid-Liquid Phase Transfer Catalysis Without Solvent

Introduction Microwave irradiation has been very widely used in heating, cooking and brewing. Several papers which describe the use of domestic microwave ovens to perform rapid organic synthesis in solution have been published. The high heating efficiency gives rise to remarkable rate of reaction and dramatic reduction of reaction time. Nevertheless, its application seems to be limited to these procedures because of

Ethyl acetate fraction of Sargassum pallidum extract attenuates particulate matter-induced oxidative stress and inflammation in keratinocytes and zebrafish

Objective:To evaluate the effect of the ethyl acetate fraction derived from Sargassum pallidum extract against particulate matter(PM)-induced oxidative stress and inflammation in HaCaT cells and zebrafish.Methods:HaCaT cells and zebrafish were used to evaluate the protective effects of the ethyl acetate fraction of Sargassum pallidum extract against PM-induced oxidative stress and inflammation.The production of nitric oxide(NO),intracellular ROS,prostaglandin E_(2)(PGE_(2)),and pro-inflammatory cytokines,and the expression levels of COX-2,iNOS,and NF-κB were evaluated in PM-induced HaCaT cells.Furthermore,the levels of ROS,NO,and lipid peroxidation were assessed in the PM-exposed zebrafish model.Results:The ethyl acetate fraction of Sargassum pallidum extract significantly decreased the production of NO,intracellular ROS,and PGE_(2) in PM-induced HaCaT cells.In addition,the fraction markedly suppressed the levels of pro-inflammatory cytokines and inhibited the expression levels of COX-2,iNOS,and NF-κB.Furthermore,it displayed remarkable protective effects against PM-induced inflammatory response and oxidative stress,represented by the reduction of NO,ROS,and lipid peroxidation in zebrafish.Conclusions:The ethyl acetate fraction of Sargassum pallidum extract exhibits a protective effect against PM-induced oxidative stress and inflammation both in vitro and in vivo and has the potential as a candidate for the development of pharmaceutical and cosmeceutical products.

Dietary sodium acetate and sodium butyrate improve high-carbohydrate diet utilization by regulating gut microbiota, liver lipid metabolism, oxidative stress, and inflammation in largemouth bass(Micropterus salmoides)

Background Adequate level of carbohydrates in aquafeeds help to conserve protein and reduce cost. However, studies have indicated that high-carbohydrate(HC) diet disrupt the homeostasis of the gut–liver axis in largemouth bass, resulting in decreased intestinal acetate and butyrate level.Method Herein, we had concepted a set of feeding experiment to assess the effects of dietary sodium acetate(SA) and sodium butyrate(SB) on liver health and the intestinal microbiota in largemouth bass fed an HC diet. The experimental design comprised 5 isonitrogenous and isolipidic diets, including LC(9% starch), HC(18% starch), HCSA(18% starch;2 g/kg SA), HCSB(18% starch;2 g/kg SB), and HCSASB(18% starch;1 g/kg SA + 1 g/kg SB). Juvenile largemouth bass with an initial body weight of 7.00 ± 0.20 g were fed on these diets for 56 d.Results We found that dietary SA and SB reduced hepatic triglyceride accumulation by activating autophagy(ATG101, LC3B and TFEB), promoting lipolysis(CPT1α, HSL and AMPKα), and inhibiting adipogenesis(FAS, ACCA, SCD1 and PPARγ). In addition, SA and SB decreased oxidative stress in the liver(CAT, GPX1α and SOD1) by activating the Keap1-Nrf2 pathway. Meanwhile, SA and SB alleviated HC-induced inflammation by downregulating the expression of pro-inflammatory factors(IL-1β, COX2 and Hepcidin1) through the NF-κB pathway. Importantly, SA and SB increased the abundance of bacteria that produced acetic acid and butyrate(Clostridium_sensu_stricto_1). Combined with the KEGG analysis, the results showed that SA and SB enriched carbohydrate metabolism and amino acid metabolism pathways, thereby improving the utilization of carbohydrates. Pearson correlation analysis indicated that growth performance was closely related to hepatic lipid deposition, autophagy, antioxidant capacity, inflammation, and intestinal microbial composition.Conclusions In conclusion, dietary SA and SB can reduce hepatic lipid deposition;and alleviate oxidative stress and inflammation in largemouth bass fed on HC diet. These beneficial effects may be due to the altered composition of the gut microbiota caused by SA and SB. The improvement effects of SB were stronger than those associated with SA.

Tailoring Ni based catalysts by indium for the dehydrogenative coupling of ethanol into ethyl acetate

Exploring stable and robust catalysts to replace the current toxic CuCr based catalysts for dehydrogenative coupling of ethanol to ethyl acetate is a challenging but promising task.Herein,novel NiIn based catalysts were developed by tailoring Ni catalysts with Indium(In)for this reaction.Over the optimal Ni0.1Zn0.7Al0.3InOx catalyst,the ethyl acetate selectivity reached 90.1%at 46.2%ethanol conversion under the conditions of 548 K and a weight hourly space velocity of 1.9 h^(-1)in the 370 h time on stream.Moreover,the ethyl acetate productivity surpassed 1.1 g_(ethyl acetate)g_(catalyst)^(-1)h^(-1),,one of the best performance in current works.According to catalyst characterizations and conditional experiments,the active sites for dehydrogenative coupling of ethanol to ethyl acetate were proved to be Ni4In alloys.The presence of In tailored the chemical properties of Ni,and subsequently inhibited the C-C cracking and/or condensation reactions during ethanol conversions.Over Ni4In alloy sites,ethanol was dehydrogenated into acetaldehyde,and then transformed into acetyl species with the removal of H atoms.Finally,the coupling between acetyl species and surface-abundant ethoxyde species into ethyl acetate was achieved,affording a high ethyl acetate selectivity and catalyst stability.

Novel Sustainable Cellulose Acetate Based Biosensor for Glucose Detection

In this study,green zinc oxide(ZnO)/polypyrrole(Ppy)/cellulose acetate(CA)film has been synthesized via solvent casting.This film was used as supporting material for glucose oxidase(GOx)to sensitize a glucose biosensor.ZnO nanoparticles have been prepared via the green route using olive leaves extract as a reductant.ZnO/Ppy nanocomposite has been synthesized by a simple in-situ chemical oxidative polymerization of pyrrole(Py)monomer using ferric chloride(FeCl3)as an oxidizing agent.The produced materials and the composite films were characterized using X-ray diffraction analysis(XRD),scanning electron microscope(SEM),Fourier transform infrared(FTIR)and thermogravimetric analysis(TGA).Glucose oxidase was successfully immobilized on the surface of the prepared film and then ZnO/Ppy/CA/GOx composite was sputtered with platinum electrode for the current determination at different initial concentrations of glucose.Current measurements proved the suitability and the high sensitivity of the constructed biosensor for the detection of glucose levels in different samples.The performance of the prepared biosensor has been assessed by measuring and comparing glucose concentrations up to 800 ppm.The results affirmed the reliability of the developed biosensor towards real samples which suggests the wide-scale application of the proposed biosensor.

Efficient and selective upcycling of waste polylactic acid into acetate using nickel selenide

The conversion of waste polylactic acid(PLA)plastics into high-value-added chemicals through electrochemical methods is a promising and sustainable approach.However,developing efficient and highly selective catalysts for lactic acid oxidation reaction(LAOR)and understanding the reaction process are challenging.Here,we report the electrooxidation of waste PLA to acetate at a high current density of 100 mA cm-2 with high Faraday efficiency(~95%)and excellent stability(>100 h)over a nickel selenide nanosheet catalyst.In addition,a total Faraday efficiency of up to 190%was achieved for carboxylic acids,including acetic acid and formic acid,by coupling with the cathodic CO_(2) reduction reaction.In situ experimental results and theoretical simulations revealed that the catalytic activity center of LAOR was dynamically formed NiOOH species,and the surface-adsorbed SeO_(x) species accelerated the formation of Ni~(3+)species,thus promoting catalytic activity.The mechanism of lactic acid electrooxidation was further elucidated.Lactic acid was dehydrogenated to produce pyruvate first and then formed CH_3CO due to preferential C-C bond cleavage,resulting in the presence of acetate.This work demonstrated a sustainable method for recycling waste PLA and CO_(2) into high-value-added products.

Polyvinyl Acetate and Vinyl Acetate-Ethylene Hybrid Adhesive: Synthesis, Characterization, and Properties

The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.

Research Progress of Environment Friendly Plasticizers for Cellulose Acetate Processing

Cellulose acetate(CA)is an important cellulose derivative that can undergo thermoplas-tic processing.Plasticizers can form stable hydrogen bonds with CA molecular chains,reducing intermolecular and intramolecular interactions,and play an important role in the melting processing of CA.In recent years,environmentally friendly plasticizers that are natural,non-toxic,odorless,low dissolution,and low migration have received increas-ing attention in plastic processing.This article reviews the research progress of environ-mentally friendly plasticizers such as natural plasticizers,ionic liquid plasticizers,citrate plasticizers,and polyethylene glycol plasticizers in the processing of cellulose acetate,and looks forward to the application prospects of environmentally friendly plasticizers.

A Review of Abiraterone Acetate for the Treatment of Metastatic Castration-Resistant Prostate Cancer

Prostate cancer is a common malignant tumor of the urinary system in men,and the incidence and detection rate of prostate cancer have been rising significantly in recent years.Androgens play an important role in the occurrence and development of prostate cancer,so hormone deprivation therapy has become an essential means of prostate cancer treatment.Abiraterone acetate is a therapeutic agent for prostate cancer by inhibiting the enzyme activity of CYP17,thereby blocking androgen biosynthesis.In this paper,we present a review of the current mechanism of action of abiraterone acetate for prostate cancer treatment,research progress,and its side effects and limitations.It is expected to provide help for further research on the treatment of prostate cancer.

Cerium modified Y/SBA-15 composite molecular sieve catalyzed synthesis of n-butyl acetate

A novel Ce-Y/SBA-15 catalyst was prepared by modifying HY/SBA-15 microporous-mesoporous composite molecular sieve with cerium using the impregnation method. The characterization results from scanning electron microscopy/energy dispersive X-ray dispersive spectroscopy（SEM/EDS）, transmission electron microscopy（TEM）, and X-ray fluorescence（XRF） studies indicated that the Ce-modified catalyst maintained the microporous-mesoporous structure of Y/SBA-15. The Ce ions were found to be uniformly dispersed in the pores of the molecular sieve without aggregation. The results from pyrolysis coupled-Fourier transform infrared spectroscopy（Pyridine-FTIR） and temperature programmed desorption of ammonia（NH3-TPD） showed that the loading of cerium caused the hydroxyl group in the catalyst to display stronger Bronsted acidity. The efficiency of the modified Ce-Y/SBA-15 catalyst was evaluated by using it to catalyze the synthesis of n-butyl acetate. The optimal synthesis conditions were determined by orthogonal experiments. The highest esterification yield of 94.4% was obtained when the reaction time was 2.0 h, with acid/alcohol molar ratio of 1：1.2, and catalyst loading of 10 wt.%. The results in this study demonstrated that the loading of cerium and the structure of Y/SBA-15 microporous-mesoporous composite molecular sieve helped in improving the catalytic activity of this acidic catalyst.

Activation of anthracite combustion by copper acetate:mechanism,effect of particle size and introduction method

This paper addressed the efect of copper acetate on the combustion characteristics of anthracite depending on the fractional composition of fuel and additive introduction method.Anthracite was impregnated with 5 wt%of Cu(CH_(3)COO)_(2)by mechanical mixing and incipient wetness impregnation.Four anthracite samples of diferent fraction with d<0.1 mm,d=0.1-0.5 mm,d=0.5-1.0 mm,and d=1.0-2.0 mm were compared.According to EDX mapping,incipient wetness impregnation provides a higher dispersion of the additive and its uniform distribution in the sample.The ignition and combustion characteristics of the modifed anthracite samples were studied by thermal analysis and high-speed video recording of the processes in a combustion chamber(at heating medium temperature of 800℃).It was found that copper acetate increases anthracite reactivity,which was evidenced by decreased onset temperature of combustion(ΔT_(i))by 35-190℃and reduced ignition delay time(Δτ_(i))by 2.1-5.4 s.Copper acetate reduces fuel underburning(on average by 70%)in the ash residue of anthracite and decreases the amount of CO and NO_(x)in gas-phase products(on average by 18.5%and 20.8%,respectively).The mechanism for activation of anthracite combustion by copper acetate is proposed.

Formation mechanisms of ethyl acetate and organic acids in Kluyveromyces marxianus L1-1 in Chinese acid rice soup

This study aims to explore the formation mechanism of ethyl acetate and organic acids in acid rice soup(rice-acid soup)inoculated with Kluyveromyces marxianus L1-1 through the complementary analysis of transcriptome and proteome.The quantity of K.marxianus L1-1 varied significantly in the fermentation process of rice-acid soup and the first and third days were the two key turning points in the growth phase of K.marxianus L1-1.Importantly,the concentrations of ethyl acetate,ethanol,acetic acid,and L-lactic acid increased from day 1 to day 3.At least 4231 genes and 2937 proteins were identified and 610 differentially expressed proteins were annotated to 30 Kyoto Encyclopedia of Genes and Genomes(KEGG)pathways based on the analysis results of transcriptome and proteome.The key genes and proteins including up-regulated alcohol dehydrogenase family,alcohol O-acetyltransferase,acetyl-CoA C-acetyltransferase,acyl-coenzyme A thioester hydrolase,and down-regulated aldehyde dehydrogenase family were involved in glycolysis/gluconeogenesis pathways,starch and sucrose metabolism pathways,amino sugar and nucleotide sugar metabolism pathways,tricarboxylic acid(TCA)cycle,and pyruvate metabolism pathways,thus promoting the formation of ethyl acetate,organic acids,alcohols,and other esters.Our results revealed the formation mechanisms of ethyl acetate and organic acids in rice-acid soup inoculated with K.marxianus L1-1.

Preparation of Cellulose Acetate Butyrate Porous Micro/Nanofibrous Membranes and Their Properties

Cellulose acetate butyrate(CAB)is a cellulose ester that is commonly used in applications such as coatings and leather brighteners.However,its appearance in a fibrous form is rarely reported.CAB porous micro/nanofibrous membranes with a large number of nanopores on the fiber surface were successfully prepared by electrospinning with dichloromethane(DCM)/acetone(AC)as the mixed solvent.Apparent morphology,porosity,moisture permeability,air permeability,static water contact angles,and thermal conductivity of the fibrous membranes were investigated at different spinning voltages.The results showed that with the increase of the spinning voltage,the average fiber diameter of the CAB porous micro/nanofibrous membranes gradually decreased and the fiber diameter distribution was more uniform.When the spinning voltage reached 40 kV,the porosity reached 91.38%,the moisture permeability was up to 7430 g/(m^(2)·d),the air permeability was up to 36.289 mm/s,the static water contact angle was up to 145.0°,while the thermal conductivity of the fibrous membranes reached 0.030 W/(m·K).The material can be applied as thermal-insulation,waterproof and moisture-permeable membranes.

Corrigendum to“GB7 acetate,a galbulimima alkaloid from Galbulimima belgraveana,possesses anticancer effects in colorectal cancer cells”[J.Pharm.Anal.12(2022)339e349]

Original statement in Section 3.5:3.5.GB7 acetate reduced the mobility and invasion of HCT 116 cells The wound healing assay showed that GB7 acetate significantly decreased the migration area of HCT 116 cells when compared with the control group(P<0.05)(Figs.5A and B).Wound healing of 34%e43%was observed after 24 h and 48 h in untreated cancer cells,whereas 10%e21%were seen in the 100 and 150 mg/mL GB7 acetate groups.

Synthesis of Microcrystalline Cellulose—Polyvinyl Alcohol Stabilized Polyvinyl Acetate Emulsion

Polyvinyl alcohol (PVA) colloid stabilized Polyvinyl acetate (PVAc) based wood adhesive has poor performance in highly humid conditions. Currently, the addition of natural fillers in the wood adhesive is one of the most effective ways to enhance the performance of PVAc wood adhesive in highly moist conditions. Microcrystalline cellulose (MCC) are strong renewable, bio-based material and has great potential in a reinforcement of the polymeric matrix. Hence, the present work investigates the applicability of microcrystalline cellulose incorporated 3% and 5% in situ emulsion polymerization PVAc wood adhesives. Effect on physical, thermal and mechanical properties was studied by viscosity, pH, contact angle measurement, differential scanning calorimetry (DSC) and pencil hardness test of films. Emulsions with different proportions of MCC were prepared and the shear strength of the applied adhesive on wood was measured. The viscosity of the adhesives was increased by increasing the concentration of MCC. The mechanical properties like tensile strength of adhesives with MCC were measured by universal tensile machine (UTM). Thermal stability was studied by differential scanning calorimetry (DSC). The tensile shear strength demonstrates that MCC can improve bonding strength as compared to PVAc Homo based adhesive in the wet condition which was validated through a contact angle study. The hardness of PVAc films were also changed positively by the addition of MCC. Here, we studied the effect of the addition of different concentrations of MCC materials in situ polymerization of PVAc on their performance properties.