The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) a...The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) and TiO_(2)barrier coatings to reduce the degradation of magnesium alloy(Mg-Ca-Zn)surfaces.These coatings were deposited by the anodization method and the spin-coating technique,respectively.The anodized layer was coated with TiO_(2)generated from the hydrolysis of 3%weight of TTIP(Ti[OCH(CH_(3))_(2)]_(4),Titanium(IV)isopropoxide)in 2-Propanol deposited by the spin-coating method.Studying the degradation in Ringer’s solution by electrochemical impedance spectroscopy and OCP revealed a 98%reduction in pittings in uncoated samples after 14 days of immersion.The p H measurements revealed that the TiO_(2)coating reduced the alkalization of the physiological environment,keeping the pH at 6.0 values.In vitro studies of two types of bacteria(E.coli and S.aureus)exhibited zones of inhibition in the agar and activity bactericidal(kill time test).The mechanisms behind the improved degradation resistance and enhanced antibacterial activity are presented and discussed here.Surface modification with Mg(OH)_(2)/TiO_(2)coatings is a promising strategy to control the biodegradation of magnesium implants for bone regeneration.展开更多
Dendrite growth and thermal runaway induce serious safety hazards,impeding the practical applications of lithium metal batteries(LMBs).Although extensive advances have been attained in terms of LMB safety,most work on...Dendrite growth and thermal runaway induce serious safety hazards,impeding the practical applications of lithium metal batteries(LMBs).Although extensive advances have been attained in terms of LMB safety,most work only focus on a single aspect at a time.This paper reports a multifunctional separator coated by Mg(OH)2 nanoflakes with various excellent properties including electrolyte wettability,ionic conductivity,Li+ transference number,puncture strength,thermal stability and flame retardance.When used in LMBs,the Mg(OH)2 nanoflake coatings enable uniform Li+ distributing,which makes it homogeneous to deposit lithium,realizing effective dendrite suppression and less volume expansion.Meanwhile,Mg(OH)2 coatings can ensure LMBs are in normal conditions without thermal runaway until 140 ℃.A part of lithium can be converted into Li+ ions by Mg(OH)2 during repeated charge/discharge cycles,not only reducing the risk of separator damage and consequent short circuit,but also replenishing the capacity loss of LMBs.The Mg(OH)2 nanoflakes can coat on all kinds of commercial separators to improve their performances,which offers a facile but effective strategy for fabricating multifunctional separators and a comprehensive insight into enhancing LMB safety.展开更多
In this paper we describe a route to produce crystalline Mg(OH)2 nanopowders from serpentinite ore distributed in the Halilovskiy array(Russia, Orenburg region). An efficient extraction route consisting of treatment o...In this paper we describe a route to produce crystalline Mg(OH)2 nanopowders from serpentinite ore distributed in the Halilovskiy array(Russia, Orenburg region). An efficient extraction route consisting of treatment on serpentinite in 40% HNO_3 at 80 °C followed by NH_4OH titration for Mg(OH)_2 precipitation was demonstrated. In this study, crystalline Mg(OH)2 nanopowders have been synthesized by solvothermal reaction method using(Mg(NO_3)_2á6H_2O) which were obtained from serpentinite, NH4 OH as a precipitator, and hydroxyethylated nonylphenol as surface-active substance. Microstructure and phase composition of samples were investigated employing scanning electron microscopy(SEM) and transmission electron microscopy(TEM), X-ray phase analysis(XRD), and inductively coupled plasma optical emission spectroscopy(ICP-OES). XRD reveals that Mg(OH)2 nanopowder with high purity has the brucite structure. It was found that crystalline Mg(OH)_2 nanopowders exclusively consist of lamellar-like structures and the sizes of Mg(OH)_2 are 30–265 nm length or width.展开更多
β-Co（OH）2 and Mg（OH）2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The p...β-Co（OH）2 and Mg（OH）2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The products were characterized by X-ray diffraction,transmission electron microscopy,scanning electron microscopy,selected area electron diffraction（SAED）,and gas chromatograph.展开更多
The erythrocyte-like magnesium hydroxide microspheres were synthesized in large scale through a simple solution phase route. The structures and morphologies of the products were analyzed by the X-ray diffractometer （...The erythrocyte-like magnesium hydroxide microspheres were synthesized in large scale through a simple solution phase route. The structures and morphologies of the products were analyzed by the X-ray diffractometer （XRD）, scanning electron microscope （SEM）, transmission electron microscope （TEM） and high-resolution transmission electron microscope （HRTEM）. The possible growth mechanism of the nanos-tructure was discussed briefly and the potential application was proposed.展开更多
基金financed by the FOMIX-Yucatán 2008-108160,CONACYT LAB-2009-01-123913,292692,294643,188345,and 204822 projectsthe financial support received from CONACYT。
文摘The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) and TiO_(2)barrier coatings to reduce the degradation of magnesium alloy(Mg-Ca-Zn)surfaces.These coatings were deposited by the anodization method and the spin-coating technique,respectively.The anodized layer was coated with TiO_(2)generated from the hydrolysis of 3%weight of TTIP(Ti[OCH(CH_(3))_(2)]_(4),Titanium(IV)isopropoxide)in 2-Propanol deposited by the spin-coating method.Studying the degradation in Ringer’s solution by electrochemical impedance spectroscopy and OCP revealed a 98%reduction in pittings in uncoated samples after 14 days of immersion.The p H measurements revealed that the TiO_(2)coating reduced the alkalization of the physiological environment,keeping the pH at 6.0 values.In vitro studies of two types of bacteria(E.coli and S.aureus)exhibited zones of inhibition in the agar and activity bactericidal(kill time test).The mechanisms behind the improved degradation resistance and enhanced antibacterial activity are presented and discussed here.Surface modification with Mg(OH)_(2)/TiO_(2)coatings is a promising strategy to control the biodegradation of magnesium implants for bone regeneration.
基金supported by the Natural Science Project from Science and Technology Department of Henan Province (172102410034)National Natural Science Foundation of China (NSFC-U1604120)。
文摘Dendrite growth and thermal runaway induce serious safety hazards,impeding the practical applications of lithium metal batteries(LMBs).Although extensive advances have been attained in terms of LMB safety,most work only focus on a single aspect at a time.This paper reports a multifunctional separator coated by Mg(OH)2 nanoflakes with various excellent properties including electrolyte wettability,ionic conductivity,Li+ transference number,puncture strength,thermal stability and flame retardance.When used in LMBs,the Mg(OH)2 nanoflake coatings enable uniform Li+ distributing,which makes it homogeneous to deposit lithium,realizing effective dendrite suppression and less volume expansion.Meanwhile,Mg(OH)2 coatings can ensure LMBs are in normal conditions without thermal runaway until 140 ℃.A part of lithium can be converted into Li+ ions by Mg(OH)2 during repeated charge/discharge cycles,not only reducing the risk of separator damage and consequent short circuit,but also replenishing the capacity loss of LMBs.The Mg(OH)2 nanoflakes can coat on all kinds of commercial separators to improve their performances,which offers a facile but effective strategy for fabricating multifunctional separators and a comprehensive insight into enhancing LMB safety.
基金the state on behalf of the Ministry of Education and Science of the Russian Federation of the Agreement (No. 14.577.21.0111 (22 September 2014))The unique identifier of the applied research (No. RFMEFI57714X0111)
文摘In this paper we describe a route to produce crystalline Mg(OH)2 nanopowders from serpentinite ore distributed in the Halilovskiy array(Russia, Orenburg region). An efficient extraction route consisting of treatment on serpentinite in 40% HNO_3 at 80 °C followed by NH_4OH titration for Mg(OH)_2 precipitation was demonstrated. In this study, crystalline Mg(OH)2 nanopowders have been synthesized by solvothermal reaction method using(Mg(NO_3)_2á6H_2O) which were obtained from serpentinite, NH4 OH as a precipitator, and hydroxyethylated nonylphenol as surface-active substance. Microstructure and phase composition of samples were investigated employing scanning electron microscopy(SEM) and transmission electron microscopy(TEM), X-ray phase analysis(XRD), and inductively coupled plasma optical emission spectroscopy(ICP-OES). XRD reveals that Mg(OH)2 nanopowder with high purity has the brucite structure. It was found that crystalline Mg(OH)_2 nanopowders exclusively consist of lamellar-like structures and the sizes of Mg(OH)_2 are 30–265 nm length or width.
基金Supported by the National Natural Science Foundation of China(Nos.20331010,20671011,90406024and90406002)the 111 Project(No.B07012)the Key Laboratory of Structural Chemistry Foundation(No.060017).
文摘β-Co（OH）2 and Mg（OH）2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The products were characterized by X-ray diffraction,transmission electron microscopy,scanning electron microscopy,selected area electron diffraction（SAED）,and gas chromatograph.
基金Sponsored by the National Natural Science Foundation of China (20373004)Program for New Century Excellent Talentsin University (NCET)as well as by Engineering Research Institute,Peking University (ERIPKU)
文摘The erythrocyte-like magnesium hydroxide microspheres were synthesized in large scale through a simple solution phase route. The structures and morphologies of the products were analyzed by the X-ray diffractometer （XRD）, scanning electron microscope （SEM）, transmission electron microscope （TEM） and high-resolution transmission electron microscope （HRTEM）. The possible growth mechanism of the nanos-tructure was discussed briefly and the potential application was proposed.
