Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub&...Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.展开更多
Nano TiO2/Fe3O4 composite particles with different molar ratios of TiO2 to Fe3O4 were prepared via sol-gel method. X-ray diffraction, transmission electron microscopy, and vibration sample magnetometry were used to ch...Nano TiO2/Fe3O4 composite particles with different molar ratios of TiO2 to Fe3O4 were prepared via sol-gel method. X-ray diffraction, transmission electron microscopy, and vibration sample magnetometry were used to characterize the TiO2/Fe3O4 particles. The photocatalytic activity of the particles was tested by degrading methyl blue solution under UV illumination （254 nm）. The results indicate that with the content of TiO2 increasing, the photocatalytic activity of the composite particles enhances, while the magnetism of the particles decreases. When the molar ratio of TiO2 to Fe3O4 is about 8, both the photocatalytic activity and magnetism of the TiO2/Fe3O4 particles are relatively high, and their photocatalytic activity remains well after repeated use.展开更多
Facile preparation of cost-effective and durable porous carbon-supported non-precious-metal/nitrogen electrocatalysts for oxygen reduction reaction(ORR)is extremely important for promoting the commercialized applicati...Facile preparation of cost-effective and durable porous carbon-supported non-precious-metal/nitrogen electrocatalysts for oxygen reduction reaction(ORR)is extremely important for promoting the commercialized applications of such catalysts.In this work,the FeCl3-containing porphyrinato iron-based covalent porous polymer(FeCl3·FeP or-CPP)was fabricated in-situ onto porous corncob biomass supports via a simple one-pot method.Subsequent thermal-reduction pyrolysis at 700℃-900℃with CO2 gas as an activating agent resulted in Fe2O3-decorated and N-doped graphitic carbon composite Fe2O3@NC&bio-C with a high degree of graphitization of Fe-involved promotion during pyrolysis(Fe2O3=FeCl3·FePor-CPP derived Fe2O3;NC=N-doped graphene analog;bio-C=the corncob-derived hierarchically porous graphitic biomass carbon framework).The derivedα-Fe2O3 andγ-Fe2O3 nanocrystals(5-10 nm particle diameter)were all immobilized on the N-doped bio-C micro/nanofibers.Notably,the Fe2O3@NC&bio-C obtained at the pyrolysis temperature of 800℃(Fe2O3@NC&bio-C-800),exhibited unusual ORR catalytic efficiency via a 4-electron pathway with the onset and half-wave potentials of 0.96 V and 0.85 V vs.RHE,respectively.In addition,Fe2O3@NC&bio-C-800 also exhibited a high and stable limiting current density of-6.0 mA cm-2,remarkably stability(larger than 91%retention after 10000 s),and good methanol tolerance.The present work represents one of the best results for iron-based biomass material ORR catalysts reported to date.The high ORR activity is attributed to the uniformly distributedα-Fe2O3 andγ-Fe2O3 nanoparticles on the N-enriched carbon matrix with a large specific surface area of 772.6 m^2 g^-1.This facilitates favor faster electron movement and better adsorption of oxygen molecules on the surface of the catalyst.Nevertheless,comparative studies on the structure and ORR catalytic activity of Fe2O3@NC&bioC-800 with Fe2O3@bio-C-800 and NC&bio-C-800 clearly highlight the synergistic effect of the coexisting Fe2O3 nanocrystals,NC,and bio-C on the ORR performance.展开更多
Transition metal oxides are promising candidates for the high-capacity anode material in lithium-ion batteries.The electrochemical performance of transition metal oxides can be improved by constructing suitable compos...Transition metal oxides are promising candidates for the high-capacity anode material in lithium-ion batteries.The electrochemical performance of transition metal oxides can be improved by constructing suitable composite architectures. Herein, we demonstrate a metal–organic framework(MOF)-assisted strategy for the synthesis of a hierarchical hybrid nanostructure composed of Fe_2O_3 nanotubes assembled in Co_3O_4 host. Starting from MOF composite precursors(Fe-based MOF encapsulated in a Cobased host matrix), a complex structure of Co_3O_4 host and engulfed Fe_2O_3 nanotubes was prepared by a simple annealing treatment in air. By virtue of their structural and compositional features, these hierarchical composite particles reveal enhanced lithium storage properties when employed as anodes for lithium-ion batteries.展开更多
A new SnO2-Fe2O3/SWCNTs（single-walled carbon nanotubes） ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO2 and Fe2O3 nanoparticles（NPs） were homogeneously located on the surface of ...A new SnO2-Fe2O3/SWCNTs（single-walled carbon nanotubes） ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO2 and Fe2O3 nanoparticles（NPs） were homogeneously located on the surface of SWCNTs,as confirmed by X-ray diffraction（XRD）,transmission electron microscope（TEM） and energy dispersive X-ray spectroscopy（EDX）.Due to the synergistic effect of different components,the as synthesized SnO2-Fe2O3/SWCNTs composite as an anode material for lithium-ion batteries exhibited excellent electrochemical performance with a high capacity of 692 mAh·g-1 which could be maintained after 50 cycles at 200 mA·g-1.Even at a high rate of2000 mA·g-1,the capacity was still remained at 656 mAh·g-1.展开更多
Fe2O3@polypyrrole nanotubes （Fe2O3@PPy nanotubes） have been successfully prepared by in-situ polymerization of the pyrrole on the surface of Fe2O3 nanotubes （Fe2O3-NTs）, via using L-Lysine as modified surfactant. ...Fe2O3@polypyrrole nanotubes （Fe2O3@PPy nanotubes） have been successfully prepared by in-situ polymerization of the pyrrole on the surface of Fe2O3 nanotubes （Fe2O3-NTs）, via using L-Lysine as modified surfactant. Hollow PPy nanotubes were also produced by dissolution of the Fe2O3 core from the core/shell composite nanotubes with 1 mol,L-1 HC1. Scanning electron microscopy（SEM）, transmission electron microscope （TEM）, selective-area electron diffraction （SAED）, X-ray powder diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared spectroscopy（FT-IR） confirmed the formation of Fe2O3-NTs and Fe2O3@PPy core/shell nanotubes. Its catalytic properties were investigated under the ultrasound. The results of UV-vis spectroscopy （UV） demonstrated Rhodamine B （RhB） can be efficiently degraded by Fe2O3 @PPy nanotubes.展开更多
As BiVO4 is one of the most popular visible-light-responding photocatalysts, it has been widely used for visiblelight-driven water splitting and environmental purification. However, the typical photocatalytic activity...As BiVO4 is one of the most popular visible-light-responding photocatalysts, it has been widely used for visiblelight-driven water splitting and environmental purification. However, the typical photocatalytic activity of unmodified BiVO4 for the degradation of organic pollutants is still not impressive. To address this limitation, we studied Fe2O3-modified porous BiVO4 nanoplates. Compared with unmodified BiVO4, the Fe2O3-modified porous Bi VO4 nanoplates showed significantly enhanced photocatalytic activities in decomposing both dye and colorless pollutant models, such as rhodamine B(Rh B) and phenol,respectively. The pseudo-first-order reaction rate constants for the degradation of RhB and phenol on Fe2O3-modified BiVO4 porous nanoplates are 27 and 31 times larger than that of pristine Bi VO4, respectively. We also found that the Fe2O3 may act as an efficient non-precious metal co-catalyst, which is responsible for the excellent photocatalytic activity of Fe2O3/BiVO4.Graphical Abstract Fe2O3, as a cheap and efficient co-catalyst, could greatly enhance the photocatalytic activity of Bi VO4 porous nanoplates in decomposing organic pollutants.展开更多
The preparation of nanometer γ-Fe2O3 through an electrochemical process was studied at room temperature, using a metal iron plate as sacrificing anode and a sheet of stainless steel as cathode, in non-aqueous mediate...The preparation of nanometer γ-Fe2O3 through an electrochemical process was studied at room temperature, using a metal iron plate as sacrificing anode and a sheet of stainless steel as cathode, in non-aqueous mediate containing （Bu）4 NBr as support electrolyre and 2% （vol%） water. The powdery particles obtained were then calcined at 300 ℃. The products were characterized by IR, XRD, SEM, TEM and laser particle size analyser, indicating the fine particle is a pure nanometer γ-Fe2O3. The morphology is like coneshaped and their average size is 22.0 nm. Furthermore the VSM spectrum shows that the particle＇s coercivity （3.9 × 10^3 A/m） is rather small, presenting the excellent super-paramagnetism.展开更多
Fe2O3/active carbon（Fe2O3/AC） nanocomposites were readily fabricated by pyrolyzing Fe3＋ impregnated active carbon in a nitrogen atmosphere. The as-prepared composites were studied by X-ray powder diffraction（XRD）...Fe2O3/active carbon（Fe2O3/AC） nanocomposites were readily fabricated by pyrolyzing Fe3＋ impregnated active carbon in a nitrogen atmosphere. The as-prepared composites were studied by X-ray powder diffraction（XRD）, X-ray photoelectron spectroscopy（XPS） and transmission electron microscopy（TEM）. The capacitive property of the composites was investigated by cyclic voltammetry（CV） and galvanostatic charge-discharge test. Physical characterizations show that the γ-Fe2O3 fine grains dispersed in the AC well, with a mean size of 21.24 nm. Electrochemical tests in 6 mol/L KOH solutions indicate that the as-prepared nanocomposites exhibited improved capacitive properties. The specific capacitance（SC） of Fe2O3/AC nanocomposites was up to 188.4 F/g that was derived from both electrochemical double-layer capacitance and pseudo-capacitance, which was 78% larger than that of pristine AC. A symmetric capacitor with Fe2O3/AC nanocomposites as electrode showed an excellent cycling stability. The SC was only reduced by a factor of 9.2% after 2000 cycles at a current density of 1 A/g.展开更多
Nanofluids because of their surface characteristics improve the oil production from reservoirs by enabling different enhanced recovery mechanisms such as wettability alteration,interfacial tension(IFT)reduction,oil vi...Nanofluids because of their surface characteristics improve the oil production from reservoirs by enabling different enhanced recovery mechanisms such as wettability alteration,interfacial tension(IFT)reduction,oil viscosity reduction,formation and stabilization of colloidal systems and the decrease in the asphaltene precipitation.To the best of the authors’ knowledge,the synthesis of a new nanocomposite has been studied in this paper for the first time.It consists of nanoparticles of both SiO2 and Fe3O4.Each nanoparticle has its individual surface property and has its distinct effect on the oil production of reservoirs.According to the previous studies,Fe3O4 has been used in the prevention or reduction of asphaltene precipitation and SiO2 has been considered for wettability alteration and/or reducing IFTs in enhanced oil recovery.According to the experimental results,the novel synthesized nanoparticles have increased the oil recovery by the synergistic effects of the formed particles markedly by activating the various mechanisms relative to the use of each of the nanoparticles in the micromodel individually.According to the results obtained for the use of this nanocomposite,understanding reservoir conditions plays an important role in the ultimate goal of enhancing oil recovery and the formation of stable emulsions plays an important role in oil recovery using this method.展开更多
Fe2O3/SiO2 nano-composite films were prepared by sol-gel technique combining heat treatment in the range of 100-900 ℃. The particle size was observed by FE-SEM. Optical properties of the films were investigated by UV...Fe2O3/SiO2 nano-composite films were prepared by sol-gel technique combining heat treatment in the range of 100-900 ℃. The particle size was observed by FE-SEM. Optical properties of the films were investigated by UV-visible spectra. Structural and magnetic characteristics were investigated through FT-IR and VSM. The transparency of the Fe2O3/SiO2 nano-composite films decreased with the content of the Fe2O3. Water and organic solvent in the films were evaporated with heat treatment, so the transparency of the films was enhanced under high temperature. It is also found that the saturation magnetization （Ms） of the films increases with the temperature. As the content of the Fe2O3 increases, when the content of the Fe2O3 is around 30wt%, the Ms of the films has a maximum value.展开更多
Al2O3 matrix composites reinforced with Fe3Al nano-particles were fabricated by hot processing at 1 4501 600 ℃. The effect of Fe3Al content on the densification, mechanical properties and microstructure of the compos...Al2O3 matrix composites reinforced with Fe3Al nano-particles were fabricated by hot processing at 1 4501 600 ℃. The effect of Fe3Al content on the densification, mechanical properties and microstructure of the composites was investigated. The results show that some elongated Al2O3 grains are observed. Fe3Al particles are mainly situated at grain boundaries of the matrix while smaller particles are trapped within the alumina grains. The addition of Fe3Al nanoparticles improves the mechanical properties of alumina. The maximum strength and toughness of the Fe3Al/Al2O3 nanocomposites are 832 MPa and 7.96 MPa·m1/2, respectively.展开更多
The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were ch...The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were characterized by means of X-ray diffraction (XRD), Raman spectra, scanning electron microscope (SEM) and vibrating sample magnetometer (VSM). Recently, the studies focus on how to improve the dispersion of composite particle and achieve good magnetic performance. Hence effects of the volume ratio of tetraethyl orthosilicate (TEOS) and magnetite colloid on the structural, morphological and magnetic properties of the composite nanoparticles were systematically investi-gated. The results revealed that the Fe3O4@SiO2 had better thermal stability and dispersion than the magnetite nanoparticles. Furthermore, the particle size and magnetic property of the Fe3O4@SiO2 composite nanoparticles can be adjusted by changing the volume ratio of TEOS and magnetite colloid.展开更多
One-dimensional and quasi-one-dimensional nanostructure materials are promising building blocks for electromagnetic devices and nanosystems.In this work,the composite Ni0.5Zn0.5Fe2O4（NZFO）/ Pb（Zr0.52Ti0.48）O3（PZT...One-dimensional and quasi-one-dimensional nanostructure materials are promising building blocks for electromagnetic devices and nanosystems.In this work,the composite Ni0.5Zn0.5Fe2O4（NZFO）/ Pb（Zr0.52Ti0.48）O3（PZT） nanofibers with average diameters about 65 nm are prepared by electrospinning from poly（vinyl pyrrolidone） （PVP） and metal salts.The precursor composite NZFO/PZT/PVP nanofibers and the subsequent calcined NZFO/PZT nanofibers are investigated by Fourier transform infrared spectroscopy （FT- IR） ,X-ray diffraction （XRD）,scanning electron microscopy （SEM）.The magnetic properties for nanofibers are measured by vibrating sample magnetometer（VSM）.The NZFO/PZT nanofibers obtained at calcination temperature of 900 °C for 2 h consist of the ferromagnetic spinel NZFO and ferroelectric perovskite PZT phases,which are constructed from about 37 nm NZFO and 17 nm PZT grains.The saturation magnetization of these NZFO/PZT nanofibers increases with increasing calcination temperature and contents of NZFO in the composite.展开更多
文摘Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.
基金supported by the National Natural Science Foundation of China (Nos. 50872011, 50402022, and 50672006)the National Basic Research Program of China (No. 2007CB613608)
文摘Nano TiO2/Fe3O4 composite particles with different molar ratios of TiO2 to Fe3O4 were prepared via sol-gel method. X-ray diffraction, transmission electron microscopy, and vibration sample magnetometry were used to characterize the TiO2/Fe3O4 particles. The photocatalytic activity of the particles was tested by degrading methyl blue solution under UV illumination （254 nm）. The results indicate that with the content of TiO2 increasing, the photocatalytic activity of the composite particles enhances, while the magnetism of the particles decreases. When the molar ratio of TiO2 to Fe3O4 is about 8, both the photocatalytic activity and magnetism of the TiO2/Fe3O4 particles are relatively high, and their photocatalytic activity remains well after repeated use.
基金the National Natural Science Foundation of China(Nos.21771192,21631003,21871024)the Major Program of Shandong Province Natural Science Foundation(No.ZR2017ZB0315)+2 种基金Fundamental Research Funds for the Central Universities(Nos.18CX06001A,19CX05001A)Research Foundation from China University of Petroleum(East China)(No.Y1510051)Taishan Scholar Program of Shandong Province(ts201712019,ts201511019).
文摘Facile preparation of cost-effective and durable porous carbon-supported non-precious-metal/nitrogen electrocatalysts for oxygen reduction reaction(ORR)is extremely important for promoting the commercialized applications of such catalysts.In this work,the FeCl3-containing porphyrinato iron-based covalent porous polymer(FeCl3·FeP or-CPP)was fabricated in-situ onto porous corncob biomass supports via a simple one-pot method.Subsequent thermal-reduction pyrolysis at 700℃-900℃with CO2 gas as an activating agent resulted in Fe2O3-decorated and N-doped graphitic carbon composite Fe2O3@NC&bio-C with a high degree of graphitization of Fe-involved promotion during pyrolysis(Fe2O3=FeCl3·FePor-CPP derived Fe2O3;NC=N-doped graphene analog;bio-C=the corncob-derived hierarchically porous graphitic biomass carbon framework).The derivedα-Fe2O3 andγ-Fe2O3 nanocrystals(5-10 nm particle diameter)were all immobilized on the N-doped bio-C micro/nanofibers.Notably,the Fe2O3@NC&bio-C obtained at the pyrolysis temperature of 800℃(Fe2O3@NC&bio-C-800),exhibited unusual ORR catalytic efficiency via a 4-electron pathway with the onset and half-wave potentials of 0.96 V and 0.85 V vs.RHE,respectively.In addition,Fe2O3@NC&bio-C-800 also exhibited a high and stable limiting current density of-6.0 mA cm-2,remarkably stability(larger than 91%retention after 10000 s),and good methanol tolerance.The present work represents one of the best results for iron-based biomass material ORR catalysts reported to date.The high ORR activity is attributed to the uniformly distributedα-Fe2O3 andγ-Fe2O3 nanoparticles on the N-enriched carbon matrix with a large specific surface area of 772.6 m^2 g^-1.This facilitates favor faster electron movement and better adsorption of oxygen molecules on the surface of the catalyst.Nevertheless,comparative studies on the structure and ORR catalytic activity of Fe2O3@NC&bioC-800 with Fe2O3@bio-C-800 and NC&bio-C-800 clearly highlight the synergistic effect of the coexisting Fe2O3 nanocrystals,NC,and bio-C on the ORR performance.
文摘Transition metal oxides are promising candidates for the high-capacity anode material in lithium-ion batteries.The electrochemical performance of transition metal oxides can be improved by constructing suitable composite architectures. Herein, we demonstrate a metal–organic framework(MOF)-assisted strategy for the synthesis of a hierarchical hybrid nanostructure composed of Fe_2O_3 nanotubes assembled in Co_3O_4 host. Starting from MOF composite precursors(Fe-based MOF encapsulated in a Cobased host matrix), a complex structure of Co_3O_4 host and engulfed Fe_2O_3 nanotubes was prepared by a simple annealing treatment in air. By virtue of their structural and compositional features, these hierarchical composite particles reveal enhanced lithium storage properties when employed as anodes for lithium-ion batteries.
基金supported by the National Key Project on Basic Research(Grant No.2011CB935904)the National Natural Science Foundation of China(Grant No.21171163,91127020)NSF for Distinguished Young Scholars of Fujian Province(Grant No.2013J06006)
文摘A new SnO2-Fe2O3/SWCNTs（single-walled carbon nanotubes） ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO2 and Fe2O3 nanoparticles（NPs） were homogeneously located on the surface of SWCNTs,as confirmed by X-ray diffraction（XRD）,transmission electron microscope（TEM） and energy dispersive X-ray spectroscopy（EDX）.Due to the synergistic effect of different components,the as synthesized SnO2-Fe2O3/SWCNTs composite as an anode material for lithium-ion batteries exhibited excellent electrochemical performance with a high capacity of 692 mAh·g-1 which could be maintained after 50 cycles at 200 mA·g-1.Even at a high rate of2000 mA·g-1,the capacity was still remained at 656 mAh·g-1.
文摘Fe2O3@polypyrrole nanotubes （Fe2O3@PPy nanotubes） have been successfully prepared by in-situ polymerization of the pyrrole on the surface of Fe2O3 nanotubes （Fe2O3-NTs）, via using L-Lysine as modified surfactant. Hollow PPy nanotubes were also produced by dissolution of the Fe2O3 core from the core/shell composite nanotubes with 1 mol,L-1 HC1. Scanning electron microscopy（SEM）, transmission electron microscope （TEM）, selective-area electron diffraction （SAED）, X-ray powder diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared spectroscopy（FT-IR） confirmed the formation of Fe2O3-NTs and Fe2O3@PPy core/shell nanotubes. Its catalytic properties were investigated under the ultrasound. The results of UV-vis spectroscopy （UV） demonstrated Rhodamine B （RhB） can be efficiently degraded by Fe2O3 @PPy nanotubes.
基金partial financial support from NSFC(51372173,51002107,and21173159)NSFC for Distinguished Young Scholars(51025207)+3 种基金Research Climb Plan of ZJED(pd2013383)Opening Project of State Key Laboratory of High Performance Ceramics and Superfine Microstructure(SKL201409SIC)Xinmiao talent project of Zhejiang Province(2013R424060)College Students Research Project of Wenzhou University(14xk193)
文摘As BiVO4 is one of the most popular visible-light-responding photocatalysts, it has been widely used for visiblelight-driven water splitting and environmental purification. However, the typical photocatalytic activity of unmodified BiVO4 for the degradation of organic pollutants is still not impressive. To address this limitation, we studied Fe2O3-modified porous BiVO4 nanoplates. Compared with unmodified BiVO4, the Fe2O3-modified porous Bi VO4 nanoplates showed significantly enhanced photocatalytic activities in decomposing both dye and colorless pollutant models, such as rhodamine B(Rh B) and phenol,respectively. The pseudo-first-order reaction rate constants for the degradation of RhB and phenol on Fe2O3-modified BiVO4 porous nanoplates are 27 and 31 times larger than that of pristine Bi VO4, respectively. We also found that the Fe2O3 may act as an efficient non-precious metal co-catalyst, which is responsible for the excellent photocatalytic activity of Fe2O3/BiVO4.Graphical Abstract Fe2O3, as a cheap and efficient co-catalyst, could greatly enhance the photocatalytic activity of Bi VO4 porous nanoplates in decomposing organic pollutants.
文摘The preparation of nanometer γ-Fe2O3 through an electrochemical process was studied at room temperature, using a metal iron plate as sacrificing anode and a sheet of stainless steel as cathode, in non-aqueous mediate containing （Bu）4 NBr as support electrolyre and 2% （vol%） water. The powdery particles obtained were then calcined at 300 ℃. The products were characterized by IR, XRD, SEM, TEM and laser particle size analyser, indicating the fine particle is a pure nanometer γ-Fe2O3. The morphology is like coneshaped and their average size is 22.0 nm. Furthermore the VSM spectrum shows that the particle＇s coercivity （3.9 × 10^3 A/m） is rather small, presenting the excellent super-paramagnetism.
基金Supported by the National Natural Science Foundation of China(No.21271138)the Natural Science Foundation of Tianjin City, China(No.10JCZDJC21500)
文摘Fe2O3/active carbon（Fe2O3/AC） nanocomposites were readily fabricated by pyrolyzing Fe3＋ impregnated active carbon in a nitrogen atmosphere. The as-prepared composites were studied by X-ray powder diffraction（XRD）, X-ray photoelectron spectroscopy（XPS） and transmission electron microscopy（TEM）. The capacitive property of the composites was investigated by cyclic voltammetry（CV） and galvanostatic charge-discharge test. Physical characterizations show that the γ-Fe2O3 fine grains dispersed in the AC well, with a mean size of 21.24 nm. Electrochemical tests in 6 mol/L KOH solutions indicate that the as-prepared nanocomposites exhibited improved capacitive properties. The specific capacitance（SC） of Fe2O3/AC nanocomposites was up to 188.4 F/g that was derived from both electrochemical double-layer capacitance and pseudo-capacitance, which was 78% larger than that of pristine AC. A symmetric capacitor with Fe2O3/AC nanocomposites as electrode showed an excellent cycling stability. The SC was only reduced by a factor of 9.2% after 2000 cycles at a current density of 1 A/g.
文摘Nanofluids because of their surface characteristics improve the oil production from reservoirs by enabling different enhanced recovery mechanisms such as wettability alteration,interfacial tension(IFT)reduction,oil viscosity reduction,formation and stabilization of colloidal systems and the decrease in the asphaltene precipitation.To the best of the authors’ knowledge,the synthesis of a new nanocomposite has been studied in this paper for the first time.It consists of nanoparticles of both SiO2 and Fe3O4.Each nanoparticle has its individual surface property and has its distinct effect on the oil production of reservoirs.According to the previous studies,Fe3O4 has been used in the prevention or reduction of asphaltene precipitation and SiO2 has been considered for wettability alteration and/or reducing IFTs in enhanced oil recovery.According to the experimental results,the novel synthesized nanoparticles have increased the oil recovery by the synergistic effects of the formed particles markedly by activating the various mechanisms relative to the use of each of the nanoparticles in the micromodel individually.According to the results obtained for the use of this nanocomposite,understanding reservoir conditions plays an important role in the ultimate goal of enhancing oil recovery and the formation of stable emulsions plays an important role in oil recovery using this method.
基金Funded by the Innovative Program of Shanghai Municipal Education Commission (No.08YZ97)the National Natural Science Foundation of China (No.10704048)
文摘Fe2O3/SiO2 nano-composite films were prepared by sol-gel technique combining heat treatment in the range of 100-900 ℃. The particle size was observed by FE-SEM. Optical properties of the films were investigated by UV-visible spectra. Structural and magnetic characteristics were investigated through FT-IR and VSM. The transparency of the Fe2O3/SiO2 nano-composite films decreased with the content of the Fe2O3. Water and organic solvent in the films were evaporated with heat treatment, so the transparency of the films was enhanced under high temperature. It is also found that the saturation magnetization （Ms） of the films increases with the temperature. As the content of the Fe2O3 increases, when the content of the Fe2O3 is around 30wt%, the Ms of the films has a maximum value.
文摘Al2O3 matrix composites reinforced with Fe3Al nano-particles were fabricated by hot processing at 1 4501 600 ℃. The effect of Fe3Al content on the densification, mechanical properties and microstructure of the composites was investigated. The results show that some elongated Al2O3 grains are observed. Fe3Al particles are mainly situated at grain boundaries of the matrix while smaller particles are trapped within the alumina grains. The addition of Fe3Al nanoparticles improves the mechanical properties of alumina. The maximum strength and toughness of the Fe3Al/Al2O3 nanocomposites are 832 MPa and 7.96 MPa·m1/2, respectively.
文摘The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were characterized by means of X-ray diffraction (XRD), Raman spectra, scanning electron microscope (SEM) and vibrating sample magnetometer (VSM). Recently, the studies focus on how to improve the dispersion of composite particle and achieve good magnetic performance. Hence effects of the volume ratio of tetraethyl orthosilicate (TEOS) and magnetite colloid on the structural, morphological and magnetic properties of the composite nanoparticles were systematically investi-gated. The results revealed that the Fe3O4@SiO2 had better thermal stability and dispersion than the magnetite nanoparticles. Furthermore, the particle size and magnetic property of the Fe3O4@SiO2 composite nanoparticles can be adjusted by changing the volume ratio of TEOS and magnetite colloid.
基金Funded by the National Natural Science Foundation of China (No. 50674048)Research Fund for the Doctoral Program of Higher Education of China(No.20103227110006)
文摘One-dimensional and quasi-one-dimensional nanostructure materials are promising building blocks for electromagnetic devices and nanosystems.In this work,the composite Ni0.5Zn0.5Fe2O4（NZFO）/ Pb（Zr0.52Ti0.48）O3（PZT） nanofibers with average diameters about 65 nm are prepared by electrospinning from poly（vinyl pyrrolidone） （PVP） and metal salts.The precursor composite NZFO/PZT/PVP nanofibers and the subsequent calcined NZFO/PZT nanofibers are investigated by Fourier transform infrared spectroscopy （FT- IR） ,X-ray diffraction （XRD）,scanning electron microscopy （SEM）.The magnetic properties for nanofibers are measured by vibrating sample magnetometer（VSM）.The NZFO/PZT nanofibers obtained at calcination temperature of 900 °C for 2 h consist of the ferromagnetic spinel NZFO and ferroelectric perovskite PZT phases,which are constructed from about 37 nm NZFO and 17 nm PZT grains.The saturation magnetization of these NZFO/PZT nanofibers increases with increasing calcination temperature and contents of NZFO in the composite.
