Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the n...Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the nano precursors of La-Mg hydrogen storage alloy was studied by infrared radiation (IR), thermo-gravimetric and differential thermal analysis (TG/DTA), X-ray diffraction analyzer (XRD) and transmission electron microscopy (TEM). IR results indicate that the chelating agent, citric acid, is not fully ionized, and carboxyl groups are not entirely used to complex metal ions in acidic solutions. The efficiency of complexing metal ions is enhanced in basic solutions. TG/DTA results show that the combustion may take place with low rate of the flame propagation that causes the longer combustion time when pH<1.5. On the contrary, the dry gel synthesized in basic solution combusts at low ignition temperature and combustion reaction is violent; it is easy to form fine particles. XRD and TEM results reveal that the precursor powders are mainly two-phase mixture of La 2 O 3 and MgO. The morphology of the particles is almost flake with the size of ~30 nm when pH is 8.0.展开更多
Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spect...Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spectroscopy （FT-IR） and scanning electron microscopy （SEM）. Methyl orange was used to estimate the photocatalytic activity of the materials. The effects of the calcination temperature and silane dosage on the photocatalytic activity of the samples were investigated. The experimental results show that the bentonite facilitates the formation of anatase and restrains the transformation of anatase to rutile. Part of nano-size TiO2 particles insert into the galleries of bentonite. The photocatalysts exhibit a synergistic effect of adsorption and photocatalysis on methyl orange. Photocatalysts prepared by ESAM method exhibit higher photocatalytic activity and better recycle ability than those of the traditional method.展开更多
Potential applications of Nano-scale science and technology are discussed in mineralogy, ore deposits, cosmochemistry and environmental sciences. Adsorption of nanometersized gold was experimentally studied on a varie...Potential applications of Nano-scale science and technology are discussed in mineralogy, ore deposits, cosmochemistry and environmental sciences. Adsorption of nanometersized gold was experimentally studied on a variety of minerals and rocks.展开更多
A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing（SON） structure was quantitatively investigated. We empl...A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing（SON） structure was quantitatively investigated. We employ a diffuse interface model that incorporates the mechanism of surface diffusion. The mechanism of the fabrication is systematically integrated for high reliability of computational analysis. A semi-implicit Fourier spectral scheme is applied for high efficiency and numerical stability. Moreover, the theoretical analysis provides the guidance that is ordered by the fundamental geometrical design parameters to guide different fabrications of SON structures. The performed simulations suggest a substantial potential of the presented model for a reliable design technology of nano/micro-fabrications.展开更多
Nowadays, nano-technology is a promising option for scientists to enhance dental conditions and provide new techniques to offer a more reliable and comfortable therapeutic pickups. In this regard, there are different ...Nowadays, nano-technology is a promising option for scientists to enhance dental conditions and provide new techniques to offer a more reliable and comfortable therapeutic pickups. In this regard, there are different methods to manufacture novel nano-structured dental materials, and also modern drug delivery techniques. In this review article, all our efforts are based on the recently nano-dental approaches closely linked to treat or prevent some common dental diseases including tooth erosion, tooth sensitivity, periodontal disease, oral cancer, and so on. All the data and articles putted in this survey are gathered from Google Scholar, PubMed, and some dental databases.展开更多
At present, the most common micro/nano-scale fabri ca tion processes include the plane silicon process based on IC technology, stereo silicon process, LIGA, quasi-LIGA based on near ultra violet deep lithography, MEMS...At present, the most common micro/nano-scale fabri ca tion processes include the plane silicon process based on IC technology, stereo silicon process, LIGA, quasi-LIGA based on near ultra violet deep lithography, MEMS, energy beam etching and micro/nano-machining, etc. A common problem for t hese processes is the difficulty to fabricate arbitrary form for 3-dimensional micro/nano-parts, devices or mechanisms. To develop advanced MEMS manufacturin g technology, and to achieve fabrication of true 3-dimensional parts, devices or mechanisms, this paper proposes a nanofabrication technology for rapid proto typing of 3-dimensional parts, using plasma chemical vapor deposition (PCVD). This process can be describes as follows: A laser beam is produced by a low power, quasi molecule laser. It enters the vac uum chamber through a window, and is focused on with the substrate surface. A ga s in the chamber is ionized by the laser beam to produce PCVD on the substrate s urface, and forms a particle of the size of Ф100 nm (its thickness is about 100 nm). When the laser beam moves along X-axis, many particles form a line. Then the laser beam moves one step in Y-axis to form a new line. A plane is complete d by many lines. Then the substrate moves in Z-axis to form new plane. Eventu ally, many planes form a 3-dimensional component. Using available CAD/CAM softw are with this process, rapid prototyping of complex components can be achieved. A nanometer precision linear motor, such as that described in Chinese national p atent (patent No. ZL 98 2 16753.9), can be used to obtain the nanometer precisio n movements in the process. The process does not require mask, can be used for v arious rapid prototyping materials, to obtain high fabrication precision (its sc ale precision is 15 nm), and larger ratio of height to width of micro/nano-stru cture. It can find widespread applications in the fabrication of micro-mechani sm, trimming IC, and fabricating minilens, etc.展开更多
Nowadays Quantum Cellular Automata (QCA) as the leading technology in design of microelectronic systems has been raised. With respect to high velocity and density in low power and also simple concepts, this technology...Nowadays Quantum Cellular Automata (QCA) as the leading technology in design of microelectronic systems has been raised. With respect to high velocity and density in low power and also simple concepts, this technology is a viable alternative to CMOS technology. In collector design, the primary component of each processor is very important. Due to the small elements in this technology, failure rate in manufacturing process technology is very high. In the other hand, the simulation shows that the intersection point of two wires is one of the critical points in QCA circuits. This means that defects in the manufacturing process around these points can cause malfunction in the circuit performance. In this paper, a collector in cross sections of wire in his new method used higher reliability against defects during manufacturing has been developed. QCA Designer software is used to simulate the case study system.展开更多
In the field of materials science and engineering,controlling over shape and crystal orientation remains a tremendous challenge.Herein,we realize a nano self-assembly morphology adjustment of Na3V2(PO4)2F3(NVPF)materi...In the field of materials science and engineering,controlling over shape and crystal orientation remains a tremendous challenge.Herein,we realize a nano self-assembly morphology adjustment of Na3V2(PO4)2F3(NVPF)material,based on surface energy evolution by partially replacing V3+with aliovalent Mn2+.Crystal growth direction and surface energy evolution,main factors in inducing the nano self-assembly of NVPF with different shapes and sizes,are revealed by high-resolution transmission electron microscope combined with density functional theory.Furthermore,NVPF with a two-dimensional nanosheet structure(NVPF-NS)exhibits the best rate capability with 68 mAh·g−1 of specific capacity at an ultrahigh rate of 20 C and cycle stability with 80.7%of capacity retention over 1,000 cycles at 1 C.More significantly,when matched with Se@reduced graphene oxide(rGO)anode,NVPF-NS//Se@rGO sodium-ion full cells display a remarkable long-term stability with a high capacity retention of 93.8%after 500 cycles at 0.5 C and−25°C.Consequently,experimental and theoretical calculation results manifest that NVPF-NS demonstrates such superior performances,which can be mainly due to its inherent crystal structure and preferential orientation growth of{001}facets.This work will promise insights into developing novel architectural design strategies for high-performance cathode materials in advanced sodium-ion batteries.展开更多
基金supported by the Open Foundation of Key Laboratory of the Ministry of Educationof Nonferrous Metal Alloys and Processes(No.EKL09002)The Ph.D.Fund Project of Lanzhou University of Science and Technology(No.BS01200904)
文摘Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the nano precursors of La-Mg hydrogen storage alloy was studied by infrared radiation (IR), thermo-gravimetric and differential thermal analysis (TG/DTA), X-ray diffraction analyzer (XRD) and transmission electron microscopy (TEM). IR results indicate that the chelating agent, citric acid, is not fully ionized, and carboxyl groups are not entirely used to complex metal ions in acidic solutions. The efficiency of complexing metal ions is enhanced in basic solutions. TG/DTA results show that the combustion may take place with low rate of the flame propagation that causes the longer combustion time when pH<1.5. On the contrary, the dry gel synthesized in basic solution combusts at low ignition temperature and combustion reaction is violent; it is easy to form fine particles. XRD and TEM results reveal that the precursor powders are mainly two-phase mixture of La 2 O 3 and MgO. The morphology of the particles is almost flake with the size of ~30 nm when pH is 8.0.
基金Funded by the Natural Science Foundation of Hebei Province, China (No. E2008000537)the Foundation for Development of Science and Technology of Hebei Province, China (No. 07215156)the Open Research Foundation of Key Laboratory of Advanced Civil Engineering Materials (Tongji University),Ministry of Education, China (No. 2010412)
文摘Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spectroscopy （FT-IR） and scanning electron microscopy （SEM）. Methyl orange was used to estimate the photocatalytic activity of the materials. The effects of the calcination temperature and silane dosage on the photocatalytic activity of the samples were investigated. The experimental results show that the bentonite facilitates the formation of anatase and restrains the transformation of anatase to rutile. Part of nano-size TiO2 particles insert into the galleries of bentonite. The photocatalysts exhibit a synergistic effect of adsorption and photocatalysis on methyl orange. Photocatalysts prepared by ESAM method exhibit higher photocatalytic activity and better recycle ability than those of the traditional method.
文摘Potential applications of Nano-scale science and technology are discussed in mineralogy, ore deposits, cosmochemistry and environmental sciences. Adsorption of nanometersized gold was experimentally studied on a variety of minerals and rocks.
基金the National Natural Science Foundation of China(No.51775154)the ZheJiang Provincial Natural Science Foundation of China(No.LZ15E050004)
文摘A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing（SON） structure was quantitatively investigated. We employ a diffuse interface model that incorporates the mechanism of surface diffusion. The mechanism of the fabrication is systematically integrated for high reliability of computational analysis. A semi-implicit Fourier spectral scheme is applied for high efficiency and numerical stability. Moreover, the theoretical analysis provides the guidance that is ordered by the fundamental geometrical design parameters to guide different fabrications of SON structures. The performed simulations suggest a substantial potential of the presented model for a reliable design technology of nano/micro-fabrications.
文摘Nowadays, nano-technology is a promising option for scientists to enhance dental conditions and provide new techniques to offer a more reliable and comfortable therapeutic pickups. In this regard, there are different methods to manufacture novel nano-structured dental materials, and also modern drug delivery techniques. In this review article, all our efforts are based on the recently nano-dental approaches closely linked to treat or prevent some common dental diseases including tooth erosion, tooth sensitivity, periodontal disease, oral cancer, and so on. All the data and articles putted in this survey are gathered from Google Scholar, PubMed, and some dental databases.
文摘At present, the most common micro/nano-scale fabri ca tion processes include the plane silicon process based on IC technology, stereo silicon process, LIGA, quasi-LIGA based on near ultra violet deep lithography, MEMS, energy beam etching and micro/nano-machining, etc. A common problem for t hese processes is the difficulty to fabricate arbitrary form for 3-dimensional micro/nano-parts, devices or mechanisms. To develop advanced MEMS manufacturin g technology, and to achieve fabrication of true 3-dimensional parts, devices or mechanisms, this paper proposes a nanofabrication technology for rapid proto typing of 3-dimensional parts, using plasma chemical vapor deposition (PCVD). This process can be describes as follows: A laser beam is produced by a low power, quasi molecule laser. It enters the vac uum chamber through a window, and is focused on with the substrate surface. A ga s in the chamber is ionized by the laser beam to produce PCVD on the substrate s urface, and forms a particle of the size of Ф100 nm (its thickness is about 100 nm). When the laser beam moves along X-axis, many particles form a line. Then the laser beam moves one step in Y-axis to form a new line. A plane is complete d by many lines. Then the substrate moves in Z-axis to form new plane. Eventu ally, many planes form a 3-dimensional component. Using available CAD/CAM softw are with this process, rapid prototyping of complex components can be achieved. A nanometer precision linear motor, such as that described in Chinese national p atent (patent No. ZL 98 2 16753.9), can be used to obtain the nanometer precisio n movements in the process. The process does not require mask, can be used for v arious rapid prototyping materials, to obtain high fabrication precision (its sc ale precision is 15 nm), and larger ratio of height to width of micro/nano-stru cture. It can find widespread applications in the fabrication of micro-mechani sm, trimming IC, and fabricating minilens, etc.
文摘Nowadays Quantum Cellular Automata (QCA) as the leading technology in design of microelectronic systems has been raised. With respect to high velocity and density in low power and also simple concepts, this technology is a viable alternative to CMOS technology. In collector design, the primary component of each processor is very important. Due to the small elements in this technology, failure rate in manufacturing process technology is very high. In the other hand, the simulation shows that the intersection point of two wires is one of the critical points in QCA circuits. This means that defects in the manufacturing process around these points can cause malfunction in the circuit performance. In this paper, a collector in cross sections of wire in his new method used higher reliability against defects during manufacturing has been developed. QCA Designer software is used to simulate the case study system.
基金We gratefully acknowledge the financial support from the National Natural Science Foundation of China(Nos.91963118,52173246,and 52102213)the Science Technology Program of Jilin Province(No.20200201066JC)the 111 Project(No.B13013).
文摘In the field of materials science and engineering,controlling over shape and crystal orientation remains a tremendous challenge.Herein,we realize a nano self-assembly morphology adjustment of Na3V2(PO4)2F3(NVPF)material,based on surface energy evolution by partially replacing V3+with aliovalent Mn2+.Crystal growth direction and surface energy evolution,main factors in inducing the nano self-assembly of NVPF with different shapes and sizes,are revealed by high-resolution transmission electron microscope combined with density functional theory.Furthermore,NVPF with a two-dimensional nanosheet structure(NVPF-NS)exhibits the best rate capability with 68 mAh·g−1 of specific capacity at an ultrahigh rate of 20 C and cycle stability with 80.7%of capacity retention over 1,000 cycles at 1 C.More significantly,when matched with Se@reduced graphene oxide(rGO)anode,NVPF-NS//Se@rGO sodium-ion full cells display a remarkable long-term stability with a high capacity retention of 93.8%after 500 cycles at 0.5 C and−25°C.Consequently,experimental and theoretical calculation results manifest that NVPF-NS demonstrates such superior performances,which can be mainly due to its inherent crystal structure and preferential orientation growth of{001}facets.This work will promise insights into developing novel architectural design strategies for high-performance cathode materials in advanced sodium-ion batteries.
