The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction （ XRD ） , differential scanning calorimetry （DSC）, scanning electron micrascopy （SEM） and the compressive , bon...The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction （ XRD ） , differential scanning calorimetry （DSC）, scanning electron micrascopy （SEM） and the compressive , bond and bending streugths of hardened paste and concrete were also measured. Results indicate that the compressive strength development of the paste made from Ca（OH）2 and nano-SiO2, the reaction rate of Ca（ OH）2 with nano- SiO2 and the velocity of C-S-H gel formation from Ca （ OH）2 with nano-SiO2 showed marked increases over those of Ca（ OH）2 with silica fume. Furthermore, the bond strength at the interface between aggregate and hardened cement paste, and the bending strength of concrete incorporated with 3% .NS increased more than those with SF, especially at early ages. To sum up, the pozzolanic activity of nano-SiO2 was much greater than that of silica fume. The results suggest that with a small amount of nano-SiO2, the Ca（ OH）2 crystal at the interface between hardened cement paste and aggregate at early ages may be effectively absorbed in high performance concrete.展开更多
Objective The effect of the silica nanoparticles（SNs） on lungs injury in rats was investigated to evaluate the toxicity and possible mechanisms for SNs.Methods Male Wistar rats were instilled intratracheally with 1 ...Objective The effect of the silica nanoparticles（SNs） on lungs injury in rats was investigated to evaluate the toxicity and possible mechanisms for SNs.Methods Male Wistar rats were instilled intratracheally with 1 mL of saline containing 6.25,12.5,and 25.0 mg of SNs or 25.0 mg of microscale SiO_2 particles suspensions for 30 d,were then sacrificed.Histopathological and ultrastructural change in lungs,and chemical components in the urine excretions were investigated by light microscope,TEM and EDS.MDA,NO and hydroxyproline（Hyp） in lung homogenates were quantified by spectrophotometry.Contents of TNF-α,TGF-β1,IL-1β,and MMP-2 in lung tissue were determined by immunohistochemistry staining.Results There is massive excretion of Si substance in urine.The SNs lead pulmonary lesions of rise in lung/body coefficients,lung inflammation,damaged alveoli,granuloma nodules formation,and collagen metabolized perturbation,and lung tissue damage is milder than those of microscale SiO_2 particles.The SNs also cause increase lipid peroxidation and high expression of cytokines.Conclusion The SNs result into pulmonary fibrosis by means of increase lipid peroxidation and high expression of cytokines.Milder effect of the SNs on pulmonary fibrosis comparing to microscale SiO_2 particles is contributed to its elimination from urine due to their ultrafine particle size.展开更多
Some properties of nano SiO 2 modified PVF adhesive were studied. The experimental results show that nano SiO 2 can improve the properties of PVF adhesive very well. Meanwhile the modification mechanism of nano SiO ...Some properties of nano SiO 2 modified PVF adhesive were studied. The experimental results show that nano SiO 2 can improve the properties of PVF adhesive very well. Meanwhile the modification mechanism of nano SiO 2 to PVF adhesive and the applications of this adhesive in paper-plastic composite, concrete and fireproof paint were discussed by using IR and XRD determination.展开更多
The role of nano-SiO 2 and ultra-fine boron carbide on the properties of alumina-graphite materials was investigated. The study showed that the ultra-fine boron carbide added modified the microstructure of residual c...The role of nano-SiO 2 and ultra-fine boron carbide on the properties of alumina-graphite materials was investigated. The study showed that the ultra-fine boron carbide added modified the microstructure of residual carbon and promoted the chemical bond between residual carbon from phenolic resin and flake graphite. The carbon white could strengthen the residual carbon from phenolic resin. These two additives improved the mechanical properties of AG refractories at both room temperature and high temperature, and thermal shock resistance was improved noticeably. When the two additives were doped together, carbon white could retard the evaporation of B 2O 3. Thermal shock resistance was guaranteed with a smaller amount of ultra-fine boron carbide.展开更多
In this study, novel core-shell SiO<sub>2</sub>-coated iron nanoparticles (SiO<sub>2</sub>-nZVI) were synthesized using a one-step Stoeber method. The Malachite green degradation abilities of t...In this study, novel core-shell SiO<sub>2</sub>-coated iron nanoparticles (SiO<sub>2</sub>-nZVI) were synthesized using a one-step Stoeber method. The Malachite green degradation abilities of the nanoparticles were investigated. The effects of ethanol/distilled water volume ratio, presence and absence of PEG, tetraethyl orthosilicate (TEOS) dosage, and hydrolysis time used in the nanoparticles preparation process were investigated. The results indicated that the SiO<sub>2</sub>-coated iron nanoparticles had the highest reduction activity when the particles synthesized with ethanol/H<sub>2</sub>O ratio of 2:1, PEG of 0.15 ml, TEOS of 0.5 ml and the reaction time was 4 h. The SiO<sub>2</sub>-nZVI nanoparticles were characterized using Transmission Electron Microscopy (TEM), Energy Dispersive Spectrometry (EDS) and powder X-Ray Diffraction (XRD). The results showed that the average particles diameter of the SiO<sub>2</sub>-nZVI was 20 - 30 nm. The thickness of the outside SiO<sub>2</sub> film is consistent and approximately 10 nm. The results indicated that the nanoparticles coated completely with a transparent SiO<sub>2</sub>-film. Such nanoparticles could have wide applications in dye decolorization.展开更多
Liquid SiO2 solutions produced by silicon-based nano- powder are covered on the fabric surface by using spray method. Fabric surfaces were coated at the room temperature in air with the different spray nozzles. Surfac...Liquid SiO2 solutions produced by silicon-based nano- powder are covered on the fabric surface by using spray method. Fabric surfaces were coated at the room temperature in air with the different spray nozzles. Surface analysis of the coated fabric was performed by using Contact Angle and SEM pictures. According to the Contact Angles measurements, the coated fabric surfaces showed hydrophobic character between 126 and 146 degrees, and the SiO2 particles sticked to the fabric fibers as seen from SEM picture.展开更多
Cyanoacrylate adhesive and its composites have been widely used in industry and dentistry. According to literature survey done by the authors, there are few papers concentrated on role of nano-sized particles on wear ...Cyanoacrylate adhesive and its composites have been widely used in industry and dentistry. According to literature survey done by the authors, there are few papers concentrated on role of nano-sized particles on wear behavior of cyanoacrylate glue. Thus the main goal of current research focused on clarifying the role of nano-sized SiO2 on wear behavior of cyanoacrylate. Pin-on-disk wear test, SEM imaging and microhardness test was utilized to investigate wear performance of cyanoacrylate and its nanocomposites with SiO2. The results indicated that SiO2 nano powders can reduce wear rate of cyanoacrylate and change its wear mechanism. It was also shown that surface hardness of cyanoacrylate is increased by addition of nano-sized SiO2.展开更多
Serials of polystyrene/SiO<sub>2</sub> Nano composites (PS/SiO<sub>2</sub>) with different content of inorganic fillers were successfully prepared by the in situ bulk radical polymerization of ...Serials of polystyrene/SiO<sub>2</sub> Nano composites (PS/SiO<sub>2</sub>) with different content of inorganic fillers were successfully prepared by the in situ bulk radical polymerization of styrene under microwave irradiation. The effect of the amount of Nano SiO<sub>2</sub> on the properties of the PS/SiO<sub>2</sub> Nanocomposites along with the average relative molecular masses (Mn, Mz and Mw) was investigated by thermal analysis and X-Ray Diffraction (XRD). Their structural model was proposed on the basis of the Optical Microscopy, FTIR (Fourier Transform Infrared) analysis, differential scanning calorimetry (DSC), gel permeation chromatography (GPC) and X-Ray Diffraction (XRD). The dispersion of nanoparticles in Polystyrene is observed in the magnified image. The effect of microwave irradiation power on molecular weight of polystyrene was also studied. It was found that, the microwave assisted reaction needs less time as compare to conventional polymerization and found to be in between 10 to 15 min.展开更多
基金Funded bythe Center of Science Research, Zhejiang Universityof Technology of China
文摘The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction （ XRD ） , differential scanning calorimetry （DSC）, scanning electron micrascopy （SEM） and the compressive , bond and bending streugths of hardened paste and concrete were also measured. Results indicate that the compressive strength development of the paste made from Ca（OH）2 and nano-SiO2, the reaction rate of Ca（ OH）2 with nano- SiO2 and the velocity of C-S-H gel formation from Ca （ OH）2 with nano-SiO2 showed marked increases over those of Ca（ OH）2 with silica fume. Furthermore, the bond strength at the interface between aggregate and hardened cement paste, and the bending strength of concrete incorporated with 3% .NS increased more than those with SF, especially at early ages. To sum up, the pozzolanic activity of nano-SiO2 was much greater than that of silica fume. The results suggest that with a small amount of nano-SiO2, the Ca（ OH）2 crystal at the interface between hardened cement paste and aggregate at early ages may be effectively absorbed in high performance concrete.
基金supported by the National Natural Science Foundation of China(Grant No.81273046)the Fundamental Research Funds for the Central Universitiesthe Preventive Medicine Research Projects of Jiangsu Province(Grant No.Y2012039)
文摘Objective The effect of the silica nanoparticles（SNs） on lungs injury in rats was investigated to evaluate the toxicity and possible mechanisms for SNs.Methods Male Wistar rats were instilled intratracheally with 1 mL of saline containing 6.25,12.5,and 25.0 mg of SNs or 25.0 mg of microscale SiO_2 particles suspensions for 30 d,were then sacrificed.Histopathological and ultrastructural change in lungs,and chemical components in the urine excretions were investigated by light microscope,TEM and EDS.MDA,NO and hydroxyproline（Hyp） in lung homogenates were quantified by spectrophotometry.Contents of TNF-α,TGF-β1,IL-1β,and MMP-2 in lung tissue were determined by immunohistochemistry staining.Results There is massive excretion of Si substance in urine.The SNs lead pulmonary lesions of rise in lung/body coefficients,lung inflammation,damaged alveoli,granuloma nodules formation,and collagen metabolized perturbation,and lung tissue damage is milder than those of microscale SiO_2 particles.The SNs also cause increase lipid peroxidation and high expression of cytokines.Conclusion The SNs result into pulmonary fibrosis by means of increase lipid peroxidation and high expression of cytokines.Milder effect of the SNs on pulmonary fibrosis comparing to microscale SiO_2 particles is contributed to its elimination from urine due to their ultrafine particle size.
文摘Some properties of nano SiO 2 modified PVF adhesive were studied. The experimental results show that nano SiO 2 can improve the properties of PVF adhesive very well. Meanwhile the modification mechanism of nano SiO 2 to PVF adhesive and the applications of this adhesive in paper-plastic composite, concrete and fireproof paint were discussed by using IR and XRD determination.
文摘The role of nano-SiO 2 and ultra-fine boron carbide on the properties of alumina-graphite materials was investigated. The study showed that the ultra-fine boron carbide added modified the microstructure of residual carbon and promoted the chemical bond between residual carbon from phenolic resin and flake graphite. The carbon white could strengthen the residual carbon from phenolic resin. These two additives improved the mechanical properties of AG refractories at both room temperature and high temperature, and thermal shock resistance was improved noticeably. When the two additives were doped together, carbon white could retard the evaporation of B 2O 3. Thermal shock resistance was guaranteed with a smaller amount of ultra-fine boron carbide.
文摘In this study, novel core-shell SiO<sub>2</sub>-coated iron nanoparticles (SiO<sub>2</sub>-nZVI) were synthesized using a one-step Stoeber method. The Malachite green degradation abilities of the nanoparticles were investigated. The effects of ethanol/distilled water volume ratio, presence and absence of PEG, tetraethyl orthosilicate (TEOS) dosage, and hydrolysis time used in the nanoparticles preparation process were investigated. The results indicated that the SiO<sub>2</sub>-coated iron nanoparticles had the highest reduction activity when the particles synthesized with ethanol/H<sub>2</sub>O ratio of 2:1, PEG of 0.15 ml, TEOS of 0.5 ml and the reaction time was 4 h. The SiO<sub>2</sub>-nZVI nanoparticles were characterized using Transmission Electron Microscopy (TEM), Energy Dispersive Spectrometry (EDS) and powder X-Ray Diffraction (XRD). The results showed that the average particles diameter of the SiO<sub>2</sub>-nZVI was 20 - 30 nm. The thickness of the outside SiO<sub>2</sub> film is consistent and approximately 10 nm. The results indicated that the nanoparticles coated completely with a transparent SiO<sub>2</sub>-film. Such nanoparticles could have wide applications in dye decolorization.
文摘Liquid SiO2 solutions produced by silicon-based nano- powder are covered on the fabric surface by using spray method. Fabric surfaces were coated at the room temperature in air with the different spray nozzles. Surface analysis of the coated fabric was performed by using Contact Angle and SEM pictures. According to the Contact Angles measurements, the coated fabric surfaces showed hydrophobic character between 126 and 146 degrees, and the SiO2 particles sticked to the fabric fibers as seen from SEM picture.
文摘Cyanoacrylate adhesive and its composites have been widely used in industry and dentistry. According to literature survey done by the authors, there are few papers concentrated on role of nano-sized particles on wear behavior of cyanoacrylate glue. Thus the main goal of current research focused on clarifying the role of nano-sized SiO2 on wear behavior of cyanoacrylate. Pin-on-disk wear test, SEM imaging and microhardness test was utilized to investigate wear performance of cyanoacrylate and its nanocomposites with SiO2. The results indicated that SiO2 nano powders can reduce wear rate of cyanoacrylate and change its wear mechanism. It was also shown that surface hardness of cyanoacrylate is increased by addition of nano-sized SiO2.
文摘Serials of polystyrene/SiO<sub>2</sub> Nano composites (PS/SiO<sub>2</sub>) with different content of inorganic fillers were successfully prepared by the in situ bulk radical polymerization of styrene under microwave irradiation. The effect of the amount of Nano SiO<sub>2</sub> on the properties of the PS/SiO<sub>2</sub> Nanocomposites along with the average relative molecular masses (Mn, Mz and Mw) was investigated by thermal analysis and X-Ray Diffraction (XRD). Their structural model was proposed on the basis of the Optical Microscopy, FTIR (Fourier Transform Infrared) analysis, differential scanning calorimetry (DSC), gel permeation chromatography (GPC) and X-Ray Diffraction (XRD). The dispersion of nanoparticles in Polystyrene is observed in the magnified image. The effect of microwave irradiation power on molecular weight of polystyrene was also studied. It was found that, the microwave assisted reaction needs less time as compare to conventional polymerization and found to be in between 10 to 15 min.
