A progress review of black carbon deposition on Arctic snow and ice and its impact on climate change

The rapid warming of the Arctic,accompanied by glacier and sea ice melt,has significant consequences for the Earth’s climate,ecosystems,and economy.Black carbon(BC)deposition on snow and ice can trigger a significant reduction in snow albedo and accelerate melting of snow and ice in the Arctic.By reviewing the published literatures over the past decades,this work provides an overview of the progress in both the measurement and modeling of BC deposition and its impact on Arctic climate change.In summary,the maximum value of BC deposition appears in the western Russian Arctic(26 ng·g^(–1)),and the minimum value appears in Greenland(3 ng·g^(–1)).BC records in the Arctic ice core already peaked in 1920s and 1970s,and shows a regional difference between Greenland and Canadian Arctic.The different temporal variations of Arctic BC ice core records in different regions are closely related to the large variability of BC emissions and transportation processes across the Arctic region.Model simulations usually underestimate the concentration of BC in snow and ice by 2–3 times,and cannot accurately reflect the seasonal and regional changes in BC deposition.Wet deposition is the main removal mechanism of BC in the Arctic,and observations show different seasonal variations in BC wet deposition in Ny-Ålesund and Barrow.This discrepancy may result from varying contributions of anthropogenic and biomass burning(BB)emissions,given the strong influence by BC from BB emissions at Barrow.Arctic BC deposition significantly influences regional climate change in the Arctic,increasing fire activities in the Arctic have made BB source of Arctic BC more crucial.On average,BC in Arctic snow and ice causes an increase of+0.17 W·m^(–2)in radiative forcing and 8 Gt·a^(–1)in runoff in Greenland.As stressed in the latest Arctic Monitoring and Assessment Programme report,reliable source information and long-term and high-resolution observations on Arctic BC deposition will be crucial for a more comprehensive understanding and a better mitigation strategy of Arctic BC.In the future,it is necessary to collect more observations on BC deposition and the corresponding physical processes(e.g.,snow/ice melting,surface energy balance)in the Arctic to provide reliable data for understanding and clarifying the mechanism of the climatic impacts of BC deposition on Arctic snow and ice.

Ash removal from inferior coal via ammonium fluoride roasting and simultaneous yield of white carbon black

The quality upgrading and deashing of inferior coal by chemical method still faces great challenges.The dangers of strong acid,strong alkali,waste water and exhaust gas as well as high cost limit its industrial production.This paper systematically investigates the ash reduction and desilicification of two typical inferior coal utilizing ammonium fluoride roasting method.Under the optimal conditions,for fat coal and gas coal,the deashing rates are 69.02%and 54.13%,and the desilicification rates are 92.64%and 90.27%,respectively.The molar dosage of ammonium fluoride remains consistent for both coals;however,the gas coal,characterized by a lower ash and silica content(less than half that of the fat coal),achieves optimum deashing effect at a reduced time and temperature.The majority of silicon in coal transforms into gaseous ammonium fluorosilicate,subsequently preparing nanoscale amorphous silica with a purity of 99.90%through ammonia precipitation.Most of the fluorine in deashed coal are assigned in inorganic minerals,suggesting the possibility of further fluorine and ash removal via flotation.This research provides a green and facile route to deash inferior coal and produce nano-scale white carbon black simultaneously.

Temperature Dependent Surface Resistivity Measures of Commercial, Multiwall Carbon Nanotubes (MWCNT), and Silver Nano-Particle Doped Polyvinyl Alcohol (PVA) Films

Pure and doped Polyvinylidene difluoride (PVDF) films, for the detection of infrared radiation, have been well documented using the mechanism of pyroelectricity. Alternatively, the electrical properties of films made from Polyvinyl Alcohol (PVA) have received considerable attention in recent years. The investigation of surface resistivities of both such films, to this point, has received far less consideration in comparison to pyroelectric effects. In this research, we report temperature dependent surface resistivity measurements of commercial, and of multiwall carbon nanotubes (MWCNT), or Ag-nanoparticle doped PVA films. Without any variation in the temperature range from 22°C to 40°C with controlled humidity, we found that the surface resistivity decreases initially, reaches a minimum, but rises steadily as the temperature continues to increase. This research was conducted with the combined instrumentation of the Keithley Model 6517 Electrometer and Keithley Model 8009 resistivity test fixture using both commercial and in-house produced organic thin films. With the objective to quantify the suitability of PVDF and PVA films as IR detector materials, when using the surface resistivity phenomenon, instead of or in addition to the pyroelectricity, surface resistivity measurements are reported when considering bolometry. We found that the surface resistivity measurements on PVA films were readily implemented.

Simulation of the Radiative Effect of Black Carbon Aerosols and the Regional Climate Responses over China

As part of the development work of the Chinese new regional climate model (RIEMS), the radiative process of black carbon (BC) aerosols has been introduced into the original radiative procedures of RIEMS, and the transport model of BC aerosols has also been established and combined with the RIEMS model. Using the new model system, the distribution of black carbon aerosols and their radiative effect over the China region are investigated. The influences of BC aerosole on the atmospheric radiative transfer and on the air temperature, land surface temperature, and total rainfall are analyzed. It is found that BC aerosols induce a positive radiative forcing at the top of the atmosphere (TOA), which is dominated by shortwave radiative forcing. The maximum radiative forcing occurs in North China in July and in South China in April. At the same time, negative radiative forcing is observed on the surface. Based on the radiative forcing comparison between clear sky and cloudy sky, it is found that cloud can enforce the TOA positive radiative forcing and decrease the negative surface radiative forcing. The responses of the climate system in July to the radiative forcing due to BC aerosols are the decrease in the air temperature in the middle and lower reaches of the Changjiang River and Huaihe area and most areas of South China, and the weak increase or decrease in air temperature over North China. The total rainfall in the middle and lower reaches of the Changjiang River area is increased, but it decreased in North China in July.

Black Carbon Particles in the Urban Atmosphere in Beijing

A study of the concentration of black carbon particles and its variation in the urban atmosphere has been carried out since 1996 in the Beijing area. The measurements were done in the late autumn and early winter each year, the period before and after domestic heating activities begin. The results show the presence of black carbon particles at the high level that vary over a large range in the urban atmosphere in Beijing. The mean value of daily average concentration for the whole observation period of 1996-2004 is 20.0 μgm^-3. An evident decrease of black carbon particle concentration in the Beijing area is observed after 2000, and the daily average concentration of black carbon particles is estimated to be 16.0 μgm^-3 with a variation range of 2.10-50.50 μgm^-3 for the period of 2000-2004. The observation method and main variation behavior characteristics of black carbon particles in the urban atmosphere in the Beijing area are given and discussed.

An overview of black carbon deposition and its radiative forcing over the Arctic

This paper gives an overview of the current understanding of the observations of black carbon(BC) in snow and ice, and the estimates of BC deposition and its radiative forcing over the Arctic. Both of the observations and model results show that, in spring, the average BC concentration and the resulting radiative forcing in Russian Arctic > Canadian and Alaskan Arctic > Arctic Ocean and Greenland. The observed BC concentration presented a signi?cant decrease trend from the Arctic coastal regions to the center of Arctic Ocean. In summer, due to the combined effects of BC accumulation and enlarged snow grain size, the averaged radiative forcing per unit area over the Arctic Ocean is larger than that over each sector of the Arctic in spring. However, because summer sea ice is always covered by a large fraction of melt ponds, the role of BC in sea ice albedo evolution during this period is secondary. Multi-model mean results indicate that the annual mean radiative forcing from all sources of BC in snow and ice over the Arctic was ~0.17 W m^(-2). Wet deposition is the dominant removal mechanism in the Arctic, which accounts for more than 90% of the total deposition. In the last part, we discuss the uncertainties in present modeling studies, and suggest potential approaches to reduce the uncertainties.

Tibetan Plateau Geladaindong black carbon ice core record(1843-1982):Recent increases due to higher emissions and lower snow accumulation

Black carbon(BC) deposited on snow and glacier surfaces can reduce albedo and lead to accelerated melt. An ice core recovered from Guoqu glacier on Mt. Geladaindong and analyzed using a Single Particle Soot Photometer(SP2) provides the ?rst long-term(1843-1982) record of BC from the central Tibetan Plateau. Post 1940 the record is characterized by an increased occurrence of years with above average BC, and the highest BC values of the record. The BC increase in recent decades is likely caused by a combination of increased emissions from regional BC sources, and a reduction in snow accumulation. Guoqu glacier has received no net ice accumulation since the 1980 s, and is a potential example of a glacier where an increase in the equilibrium line altitude is exposing buried high impurity layers. That BC concentrations in the uppermost layers of the Geladaindong ice core are not substantially higher relative to deeper in the ice core suggests that some of the BC that must have been deposited on Guoqu glacier via wet or dry deposition between 1983 and 2005 has been removed from the surface of the glacier, potentially via supraglacial or englacial meltwater.

Soil Organic Carbon, Black Carbon, and Enzyme Activity Under Long-Term Fertilization

The present study aims to understand the effects of long-term fertilization on soil organic carbon （SOC）, black carbon （BC）, enzyme activity, and the relationships among these parameters. Paddy field was continuously fertilized over 30 yr with nine different fertilizer treatments including N, P, K, NP, NK, NPK, 2NPK （two-fold NPK）, NPK＋manure （NPKM）, and CK （no fertilization）, N, 90 kg urea-N ha^-1 yr^-1; P, 45 kg triple superphosphate-P205 ha^-1 yr^-1; K, 75 kg potassium chloride-K20 ha^-1 yr^-1; and pig manure, 22 500 kg ha^-1 yr^-1. Soil samples were collected and determined for SOC, BC content, and enzyme activity. The results showed that the SOC in the NPKM treatment was significantly higher than those in the K, P, and CK treatments. The lowest SOC content was found in the CK treatment. SOC content was similar in the N, NP, NK, NPK, 2NPK, and NPKM treatments. There was no significant difference in BC content among different treatments. The BC-to-SOC ratios （BC/SOC） ranged from 0.50 to 0.63, suggesting that BC might originate from the same source. Regarding enzyme activity, NPK treatment had higher urease activity than NPKM treatment. The urease activity of NPKM treatment was significantly higher than that of 2NPK, NP, N, P, K, CK, and NPKM treatment which produced higher activities of acid phosphatase, catalase, and invertase than all other treatments. Our results indicated that long-term fertilization did not significantly affect BC content. Concurrent application of manure and mineral fertilizers increased SOC content and significantly enhanced soil enzyme activities. Correlation analysis showed that catalase activity was significantly associated with invertase activity, but SOC, BC, and enzyme activity levels were not significantly correlated with one another. No significant correlations were observed between BC and soil enzymes. It is unknown whether soil enzymes play a role in the decomposition of BC.

Modeling black carbon and its potential radiative effects over the Tibetan Plateau

A regional climate model(RegCM4.3.4) coupled with an aerosol-snow/ice feedback module was used to simulate the deposition of anthropogenic light-absorbing impurities in snow/ice and the potential radiative feedback of black carbon(BC) on temperature and snow cover over the Tibetan Plateau(TP) in 1990-2009. Two experiments driven by ERA-interim reanalysis were performed, i.e., with and without aerosol-snow/ice feedback. Results indicated that the total deposition BC and organic matter(OM) in snow/ice in the monsoon season(MayeS eptember) were much more than non-monsoon season(the remainder of the year). The great BC and OM deposition were simulated along the margin of the TP in the non-monsoon season, and the higher deposition values also occurred in the western TP than the other regions during the monsoon period. BC-in-snow/ice decreased surface albedo and caused positive surface radiative forcing(SRF)(3.0-4.5 W m^(-2)) over the western TP in the monsoon season. The maximum SRF(5-6 W m^(-2)) simulated in the Himalayas and southeastern TP in the non-monsoon season. The surface temperature increased by 0.1-1.5℃ and snow water equivalent decreased by 5-25 mm over the TP, which showed similar spatial distributions with the variations of SRF in each season. This study provided a useful tool to investigate the mechanisms involved in the effect of aerosols on climate change and the water cycle in the cryospheric environment of the TP.

Radiative Forcing and Climate Response Due to Black Carbon in Snow and Ice

The radiative forcing and climate response due to black carbon（BC） in snow and/or ice were investigated by integrating observed effects of BC on snow/ice albedo into an atmospheric general circulation model（BCC AGCM2.0.1） developed by the National Climate Center（NCC） of the China Meteorological Administration（CMA）.The results show that the global annual mean surface radiative forcing due to BC in snow/ice is ＋0.042 W m 2,with maximum forcing found over the Tibetan Plateau and regional mean forcing exceeding ＋2.8 W m 2.The global annual mean surface temperature increased 0.071 C due to BC in snow/ice.Positive surface radiative forcing was clearly shown in winter and spring and increased the surface temperature of snow/ice in the Northern Hemisphere.The surface temperatures of snow-covered areas of Eurasia and North America in winter（spring） increased by 0.83 C（0.6 C） and 0.83 C（0.46 C）,respectively.Snowmelt rates also increased greatly,leading to earlier snowmelt and peak runoff times.With the rise of surface temperatures in the Arctic,more water vapor could be released into the atmosphere,allowing easier cloud formation,which could lead to higher thermal emittance in the Arctic.However,the total cloud forcing could decrease due to increasing cloud cover,which will offset some of the positive feedback mechanism of the clouds.

Paleoceanographic Indicators for Early Cambrian Black Shales from the Yangtze Platform, South China: Evidence from Biomarkers and Carbon Isotopes

The lower Cambrian Niutitang Formation, a widespread black shale deposition, is of geological interest because of its polymetallic beds, Cambrian explosion, depositional ages, dramatic environmental changes and so on. Previous study focused mainly on inorganic geochemistry and few studies have investigated the organic fractions of upper Neoproterozoic-lower Cambrian strata in South China. Here we report a study of biomarkers plus organic carbon isotopes for black shales from Ganziping, Hunan Province （China）. All the saturated hydrocarbon fractions have a unimodal distribution of n-alkanes, a high content of short-chain alkanes and maximize at C 19 or C 20 （C 23 for sample Gzh00-1）. The C 27 /C 29 sterane ratio ranges from 0.77 to 1.20 and 4-methylsteranes are in low abundance. These parameters indicate that algae and bacteria are the important primary producers. Furthermore, biomarker maturity proxies show the samples to be higher maturity. The low Pr/Ph values （0.7） suggest that the samples were deposited under anoxic conditions and, likely, under stratified water columns. In addition, 25-norhopanes and gammacerane are present as diagnostic indicators of normal marine salinity and dysoxic to anoxic conditions. During the Early Tommotian, known to coincide with a transgression event, small shelly fossils increased in abundance and diversity. Moreover, positive δ 13 C org excursions close to 1.4‰ occur at the base of the Tommotian stage. In summary, the Early Cambrian black shales were deposited under dramatic paleoenvironmental changes, including oceanic anoxia, higher primary productivity and sea-level rise.

Black carbon and polycyclic aromatic hydrocarbons (PAHs) in surface sediments of China’s marginal seas

This study investigates the distribution of black carbon （BC） and its correlation with total polycyclic aromatic hydrocarbons （EPAH） in the surface sediments of China＇s marginal seas. BC content ranges from 〈0.10 to 2.45 mg/g dw （grams dry weight） in the sediments studied, and varied among the different coastal regions. The Bohai Bay sediments had the highest BC contents （average 2.18 mg/g dw）, which comprises a significant fraction （27%-41%） of the total organic carbon （TOC） preserved in the sediments. In comparison, BC in the surface sediments of the North Yellow Sea, Jiaozhou Bay, East China Sea and the South China Sea is less abundant and accounted for an average of 6%, 8%, 14% and 5%, respectively, of the sedimentary organic carbon pool. The concentration of EPAH in the surface sediments ranges from 41 to 3 667 ng/g dw and showed large spatial variations among the sampling sites of different costal regions. The Bohai Bay has the highest ZPAH values, ranging from 79 to 3 667 ng/g dw. This reflects the high anthropogenically contaminated nature of the sediments in the bay. BC is positively correlated to TOC but a strong correlation is not found between BC and ZPAH in the surface sediments studied, suggesting that BC and PAHs preserved in the sediments are derived from different sources and controlled by different biogeochemical processes. Our study suggests that the abundance of BC preserved in the sediments could represent a significant sink pool of carbon cycling in China＇s marginal seas.

Age-related Changes of Carbon Accumulation and Allocation in Plants and Soil of Black Locust Forest on Loess Plateau in Ansai County, Shaanxi Province of China

The effects of reforestation on carbon （C） sequestration in China＇s Loess Plateau ecosystem have attracted much research attention in recent years. Black locust trees （Robinia pseudoacacia L.） are valued for their important use in reforestation and water and soil conservation efforts. This forest type is widespread across the Loess Plateau, and must he an essential component of any planning for C sequestration efforts in this fragile ecological region. The long-term effects of stand age on C accumulation and allocation after reforestation remains uncertain. We examined an age-sequence of black locust forest （5, 9, 20, 30, 38, and 56 yr since planting） on the Loess Plateau to evaluate C accumulation and allocation in plants （trees, shrubs, herbages, and leaf litter） and soil （0-100 cm）. Allometric equations were developed for estimating the biomass of tree components （leaf, branch, stem without bark, bark and root） with a de- structive sampling method. Our results demonstrated that black locust forest ecosystem accumulated C constantly, from 31.42 Mg C/ha （1 Mg = 106 g） at 5 yr to 79.44 Mg C/haat 38 yr. At the ＇old forest＇ stage （38 to 56 yr）, the amount of C in plant biomass significantly decreased （from 45.32 to 34.52 Mg C/ha） due to the high mortality of trees. However, old forest was able to accumulate C continuously in soil （from 33.66 to 41.00 Mg C/ha）. The C in shrub biomass increased with stand age, while the C stock in the herbage layer and leaf litter was age-independent. Reforestation resulted in C re-allocation in the forest soil. The topsoil （0-20 cm） C stock increased constantly with stand age. However, C storage in sub-top soil, in the 20-30, 30-50, 50-100, and 20-100 cm layers, was age-independent. These results suggest that succession, as a temporal factor, plays a key role in C accumulation and re-allocation in black locust forests and also in regional C dynamics in vegetation.

Controls on the organic carbon content of the lower Cambrian black shale in the southeastern margin of Upper Yangtze

Control of various factors, including mineral components, primary productivity and redox level, on the total organic carbon(TOC) in the lower Cambrian black shale from southeastern margin of Upper Yangtze(Taozichong, Longbizui and Yanbei areas) is discussed in detail in this article. Mineral components in the study strata are dominated by quartz and clay minerals. Quartz in the Niutitang Formation is mainly of biogenic origin, and the content is in positive correlation with TOC, while the content of clay minerals is negatively correlated with TOC. Primary productivity, represented by the content of Mobio(biogenic molybdenum), Babio(biogenic barium) and phosphorus, is positively correlated with TOC. The main alkanes in studied samples are nCC, and odd–even priority values are closed to 1(0.73–1.13), which suggest the organic matter source was marine plankton. Element content ratios of U/Th and Ni/Co and compound ratio Pr/Ph indicate dysoxic–anoxic bottom water, with weak positive relative with TOC. In total, three main points can be drawn to explain the relationship between data and the factors affecting organic accumulation:(1) quartz-rich and clay-mineral-poor deep shelf–slope–basin environment was favorable for living organisms;(2) high productivity provided the material foundation for organic generation;(3) the redox conditions impact slightly on the content of organic matter under high productivity and dysoxic–anoxic condition.

Influence of Water Content on Conductivity and Piezoresistivity of Cement-based Material with both Carbon Fiber and Carbon Black

The influence of water content on the conductivity and piezoresistivity of cement-based material with carbon fiber （CF） and carbon black （CB） was investigated. The piezoresistivity of cement-based material with both CF and CB was compared with that of cement-based material with CF only, and the changes in electrical resistivity of cement-based material with both CF and CB under static and loading conditions in different drying and soaking time were studied. It is found that the piezoresistivity of cement-based material with both CF and CB has better repeatability and linearity than that of cement-based material with CF only. The conductivity and the sensitivity of piezoresistive cement-based material with both CF and CB are enhanced as the water content in piezoresistive cement-based material increases.

INFLUENCES OF MODIFIERS ON SURFACE PROPERTIES OF WHITE CARBON BLACK AND MECHANICAL PROPERTIES OF SILICONE RUBBER

Various of modifiers were used to modify the surface activity of white carbon black. The oil absorption, viscosity, hydrophobic rate and burning loss of white carbon black and the mechanical propertiess of silicone rubber were measured. The influences of the modifiers on the properties of white carbon black and the mechanical properties of silicone rubber were discussed.

Silver Supported on White Carbon Black Containing Rare Earths as Antibacterial Material

The antimicrobial effect of the Ag-White Carbon Black containing rare earth was investigated. Inorganic antibiotic materials consist of the antibacterial ion, the additive and the carrier. The sol-gel method was used to prepare the white carbon black carrier. Ag+ was selected to be the antibacterial ion, and cerous nitrate was selected to be the additive. They were synthesized on the white carbon black carrier. The structures and properties of antibacterial material were characterized by inductively coupled plasma, particle size measurement instrument, fourier transform infrared and enumeration tests (Escherichia coli as experimental bacterium). Results showed that the amount of antibacterial ions and bacteriostasis rate of this new material are higher than those for the general Ag-antibacterial white carbon black (without containing rare earth). Ag+ was bound to white carbon black by ion exchange process and adsorption process. Bacteriostasis rate is over 99%, and the particle size can be extended down to 7 μm with a narrow size distribution. Other advantages of this material are good thermal and light stability. Furthermore, from the antibacterial experiment in rubber and the coating surface of metal, this new material showed promising results. The possible antibacterial mechanism was also proposed through all the experimental data in this study.

Preparation and Properties of Rare Earth Modified Carbon Black/Natural Rubber Composites

The oxides Eu, Ho, Er and Dy were used to prepare the hydroxides of rare earth modified carbon black. Then natural rubber latex （NRL） was added into the reactor. The system reacted at 85 ℃ with stirring for 1 h to prepare powdered HAF-Ln（OH）3/NR composites. The effects of the kind and content of Ln on the particle size distribution of P [ NR/HAF-Ln （OH）3 ] and mechanical properties of its vulcanizate were studied respectively. It is found that rare earth can help to get the powder of the composite, the product particle with a diameter less than 0.9mm will be get when the composites containing the compound of Ho, Er and Dy with dosage of 1.0, 1.0, O. 5 percent, respectively. The adding of Ln can improve the tensile strength and tear strength of the vulcanizate effectively, what＇s more, Er and Dy can decrease the permanent set of vulcanizate significantly. The SEM studies shows that P[ NR/HAF-Dy （OH）3 ] vulcanizate shows superior mechanical properties that depend primarily on the absence of free carbon black, the fine dispersion of carbon black in the rubber matrix and better polymer-filler interaction.

Century-scale high-resolution black carbon records in sediment cores from the South Yellow Sea, China

Black carbon(BC)has received increasing attention in the last 20 years because it is not only an absorbent of toxic pollutants but also a greenhouse substance,preserving fire-history records,and more importantly,acting as an indicator of biogeochemical cycles and global changes.By adopting an improved chemothermal oxidation method(WXY),this study reconstructed the century-scale high-resolution records of BC deposition from two fine-grained sediment cores collected from the Yellow Sea Cold Water Mass in the South Yellow Sea.The BC records were divided into five stages,which exhibited specific sequences with three BC peaks at approximately 1891,1921,and 2007 AD,representing times at which the first heavy storms appeared just after the termination of long-term droughts.The significant correlation between the times of the BC peaks in the cores and heavy storms in the area of the Huanghe(Yellow)River demonstrated that BC peaks could result from markedly strengthened sedimentation due to surface runof f,which augmented the atmospheric deposition.Stable carbon isotope analysis indicated that the evident increase in carbon isotope ratios of BC in Stage 5 might have resulted from the input of weathered rock-derived graphitic carbon cardinally induced by the annual anthropogenic modulation of water-borne sediment in the Huanghe River since 2005 AD.Numerical calculations demonstrated that the input fraction of graphitic carbon was 22.97% for Stage 5,whereas no graphitic carbon entered during Stages 1 and 3.The obtained data provide new and important understanding of the source-sink history of BC in the Yellow Sea.

Role of Black Carbon-Induced Changes in Snow Albedo in Predictions of Temperature and Precipitation during a Snowstorm

In this study the authors apply the chemistry version of the Weather Research and Forecasting model （WRF-Chem） to examine the impacts of black carbon （BC）-induced changes in snow albedo on simulated temperature and precipitation during the severe snowstorm that occurred in southern China during 0800 26 January to 0800 29 January 2008 （Note that all times are local time except when otherwise stated）. Black carbon aerosol was simulated online within the WRF-Chem. The model resuits showed that surface-albedo, averaged over 27-28 January, can be reduced by up to 10% by the deposition of BC. As a result, relative to a simulation that does not consider deposition of BC on snow/ice, the authors predicted surface air temperatures during 27-28 January can differ by -1.95 to 2.70 K, and the authors predicted accumulated precipitation over 27-28 January can differ by -2.91 to 3.10 mm over Areas A and B with large BC deposition. Different signs of changes are determined by the feedback of clouds and by the availability of water vapor in the atmosphere.