Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu alloy was studied.The results show that the reinforcements(β-Si andθ-CuAl_(2)phases)of the Al-Si-Cu alloy are dispersed in theα-Al matrix phase with finer phase size after the treatment.The processed samples exhibit grain sizes in the submicron or even nanometer range,which effectively improves the mechanical properties of the material.The hardness and strength of the deformed alloy are both significantly raised to 268 HV and 390.04 MPa by 10 turns HPT process,and the fracture morphology shows that the material gradually transits from brittle to plastic before and after deformation.The elements interdiffusion at the interface between the phases has also been effectively enhanced.In addition,it is found that the severe plastic deformation at room temperature induces a ternary eutectic reaction,resulting in the formation of ternary Al+Si+CuAl_(2)eutectic.

Substrate topography as a powerful tool to modify glial cell biology and interactions

Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord.Under normal conditions,maintenance of this complex system is structurally and functionally supported by astrocytes (ACs)and other glial cells,the processes of which form a framework surrounding neuronal cell bodies,dendrites,axons,and synapses.

Antibacterial Effect of Nano-scale TiO_2 on Parasitic Bacterium of Nanfeng Citrus in Storage Period

[Objective] The aim was to observe the antibacterial effect of nano-scale Titanium dioxide on parasitic bacterium of Nanfeng Citrus in storage period.[Method] Nano-scale Titanium dioxide was prepared by dibutyl phthalate through sol-gel method under anhydrous conditions,and orthogonal experiment was used to determine optimum conditions for nano-scale Titanium dioxide preparation,and structure characterization of nano-scale Titanium dioxide was carried out by X-Ray diffractometer.Oxford cup method was used to explore inhibition effect of nano-scale Titanium dioxide suspension on the activity of normal parasitic bacterium of Nanfeng Citrus.Simultaneously,the empirical preservation test was carried out.[Result] The average diameter of nano-scale Titanium dioxide powder attained to 14.6 nm,actual average yield could reach 90.83% with RSD（Relative Standard Deviation）of 0.86%.[Conclusion] Nano-scale Titanium dioxide had good antibacterial effect on the parasitic bacterium of Nanfeng Citrus in storage period.

Visual Object Tracking and Servoing Control of a Nano-Scale Quadrotor:System,Algorithms,and Experiments

There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most challenging problems.In this paper,we present a visual object tracking and servoing control system utilizing a tailor-made 38 g nano-scale quadrotor.A lightweight visual module is integrated to enable object tracking capabilities,and a micro positioning deck is mounted to provide accurate pose estimation.In order to be robust against object appearance variations,a novel object tracking algorithm,denoted by RMCTer,is proposed,which integrates a powerful short-term tracking module and an efficient long-term processing module.In particular,the long-term processing module can provide additional object information and modify the short-term tracking model in a timely manner.Furthermore,a positionbased visual servoing control method is proposed for the quadrotor,where an adaptive tracking controller is designed by leveraging backstepping and adaptive techniques.Stable and accurate object tracking is achieved even under disturbances.Experimental results are presented to demonstrate the high accuracy and stability of the whole tracking system.

Numerical Analysis of the Adhesive Forces in Nano-Scale Structure

Nanohairs, which can be found on the epidermis of Tokay gecko＇s toes, contribute to the adhesion by means of van der Waals force, capillary force, etc. This structure has inspired many researchers to fabricate the attachable nano-scale structures. However, the efficiency of artificial nano-scale structures is not reliable sufficiently. Moreover, the mechanical parameters related to the nano-hair attachment are not yet revealed qualitatively. The mechanical parameters which have influence on the ability of adhesive nano-hairs were investigated through numerical simulation in which only van der Waals force was considered. For the numerical analysis, finite element method was utilized and van der Waals force, assumed as 12-6 Lennard-Jones potential, was implemented as the body force term in the finite element formulation.

In-situ hydrocarbon formation and accumulation mechanisms of micro- and nano-scale pore-fracture in Gulong shale, Songliao Basin, NE China

By conducting experimental analyses, including thermal pyrolysis, micro-/nano-CT, argon-ion polishing field emission scanning electron microscopy (FE-SEM), confocal laser scanning microscopy (CLSM), and two-dimensional nuclear magnetic resonance (2D NMR), the Gulong shale oil in the Songliao Basin was investigated with respect to formation model, pore structure and accumulation mechanism. First, in the Gulong shale, there are a large number of pico-algae, nano-algae and dinoflagellates, which were formed in brackish water environment and constituted the hydrogen-rich oil source materials of shale. Second, most of the oil-generating materials of the Qingshankou Formation shale exist in the form of organo-clay complex. During organic matter thermal evolution, clay minerals had double effects of suppression and catalytic hydrogenation, which expanded shale oil window and increased light hydrocarbon yield. Third, the formation of storage space in the Gulong Shale was related to dissolution and hydrocarbon generation. With the diagenesis, micro-/nano-pores increased, pore diameter decreased and more bedding fractures appeared, which jointly gave rise to the unique reservoir with dual media (i.e. nano-scale pores and micro-scale bedding fractures) in the Gulong shale. Fourth, the micro-/nano-scale oil storage unit in the Gulong shale exhibits independent oil/gas occurrence phase, and shows that all-size pores contain oils, which occur in condensate state in micropores or in oil-gas two phase (or liquid) state in macropores/mesopores. The understanding about Gulong shale oil formation and accumulation mechanism has theoretical and practical significance for advancing continental shale oil exploration in China.

GNSS Technology’s Contribution to Topography: Evaluative Study of Gaps between Methods Topographies

New information and communication technologies have led to the emergence of new techniques in our daily lives. Indeed, in topography, a lightning development of new techniques and new devices has been noticed. This development has given rise to a multitude of choices of devices and various classes of precision. This implies that the decision-makers have to study the adequate equipment and the appropriate technique according to the topographic task to be realized. The objective is not to compare GNSS and topographic techniques, but to point out the contribution of the Global Navigation Satelite System (GNSS) techniques of topographic work. Thus, a theoretical study with a critical eye on the scientific principle of calculating the third topographic dimension followed by a leveling campaign, Real Time Kinematic (RTK) surveys will be used in order to be able to compare and interpret the result from these campaigns. The study of the difference resulting from the practical campaigns will allow us to identify the contribution of GNSS technology.

Nano-scale Interfacial Friction Behavior between Two Kinds of Materials in MEMS Based on Molecular Dynamics Simulations

The aim of this article was to provide a systematic method to perform molecular dynamics simulotion or evaluation for nano-scale interfacial friction behavior between two kinds of materials in MEMS design. Friction is an important factor affecting the performance and reliability of MEMS. The model of the nano-scale interracial friction behavior between two kinds of materials was presented based on the Newton＇ s equations of motion. The Morse potential function was selected for the model. The improved Verlet algorithm was employed to resolve the model, the atom trajectories and the law of the interfacial friction behavior. Comparisons with experimental data in other paper confirm the validity of the model. Using the model it is possible to simulate or evaluate the importance of different factors for designing of the nano-scale interfacial friction behavior between two kinds of materials in MEMS.

Influence of the finite size effect of Si（001）/SiO2 interface on the gate leakage current in nano-scale transistors

With the device size gradually approaching the physical limit, the small changes of the Si(001)/SiO 2 interface in silicon-based devices may have a great impact on the device characteristics. Based on this, the bridge-oxygen model is used to construct the interface of different sizes, and the finite size effect of the interface between fine electronic structure silicon and silicon dioxide is studied. Then, the influence of the finite size effect on the electrical properties of nanotransistors is calculated by using the first principle. Theoretical calculation results demonstrate that the bond length of Si-Si and Si-O shows a saturate tendency when the size increases, while the absorption capacity of visible light and the barrier of the interface increase with the decrease of size. Finally, the results of two tunneling current models show that the finite size effect of Si(001)/SiO 2 interface can lead to a larger change in the gate leakage current of nano-scale devices, and the transition region and image potential, which play an important role in the calculation of interface characteristics of large-scale devices, show different sensitivities to the finite size effect. Therefore, the finite size effect of the interface on the gate leakage current cannot be ignored in nano-scale devices.

Novel Nano-scale Overlay Alignment Method for Room-temperature Imprint Lithography

A novel nano-scale alignment technique based on Moiré signal for room-temperature imprint lithography in the submicron realm is proposed. The Moiré signals generated by a pair of quadruple gratings on two templates respectively are optically projected onto a photodetector array, then the detected Moiré signals are used to estimate the alignment errors in x and y directions. The experiment result indicates that complex differential Moiré signal is sensitive to relative displacement of the pair of marks than each single Moiré signal, and the alignment resolutions obtained in x and y directions are ±20nm(3σ) and ±24nm(3σ). They can meet the requirement of alignment accuracy for submicron imprint lithography.

Influence of topography on the fine structures of stratospheric gravity waves:An analysis using COSMIC-2 temperature data

We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation Observing System for Meteorology,Ionosphere,and Climate-2(COSMIC-2)satellite.Owing to the dense sampling of COSMIC-2,in addition to the strong peaks of gravity wave potential energy(GWPE)above the Andes and Tibetan Plateau,we found weak peaks above the Rocky,Atlas,Caucasus,and Tianshan Mountains.The land-sea contrast is responsible for the longitudinal variations of the GWPE in the lower and upper stratosphere.At 40°N/S,the peaks were mainly above the topographic regions during the winter.At 20°N/S,the peaks were a slight distance away from the topographic regions and might be the combined effect of nontopographic GWs and mountain waves.Near the Equator,the peaks were mainly above the regions with the lowest sea level altitude and may have resulted from convection.Our results indicate that even above the local regions with lower sea level altitudes compared with the Andes and Tibetan Plateau,the GWPE also exhibits fine structures in geographic distributions.We found that dissipation layers above the tropopause jet provide the body force to generate secondary waves in the upper stratosphere,especially during the winter months of each hemisphere and at latitudes of greater than 20°N/S.

Influence of Topography on the Distribution and Structure of Woody Plants in the Senegalese Sahel (Sandy Ferlo)

This study describes the floristic composition and structure of a woody stand in the Senegalese Sahel, paying particular attention to the edaphic factors of its floristic composition. A stratified inventory considering the different relief units was adopted. Woody vegetation was surveyed using a dendrometric approach. The results obtained show that the flora is dominated by a few species adapted to drought, such as Balanites aegyptiaca (L.) Del., Calotropis procera Ait. and Boscia senegalensis (Pers.). The distribution of this flora and the structure of the ligneous plants are linked to the topography. In the lowlands, the flora is more diversified and the ligneous plants reach their optimum level of development compared with the higher relief areas. In the lowlands, there are a few woody species which, in the past, were indicative of better climatic conditions. These are Anogeissus leiocarpus (DC.), Commiphora africana (A. Rich.), Feretia apodanthera Del., Loeseneriella africana (A. Smith), Mitragyna inermis (Willd.) and Sclerocarya birrea (A. Rich). It is important that their reintroduction into reforestation projects takes account of their edaphic preference.

The effect of topographic density variations on the geoid and orthometric heights in Hong Kong

Utilizing the adopted average topographic density of 2670 kg/m^(3)in the reduction of gravity anomalies introduces errors attributed to topographic density variations,which consequently affect geoid modeling accuracy.Furthermore,the mean gravity along the plumbline within the topography in the definition of Helmert orthometric heights is computed approximately by applying the Poincar e-Prey gravity reduction where the topographic density variations are disregarded.The Helmert orthometric heights of benchmarks are then affected by errors.These errors could be random or systematic depending on the specific geological setting of the region where the leveling network is physically established and/or the geoid model is determined.An example of systematic errors in orthometric heights can be given for large regions characterized by sediment or volcanic deposits,the density of which is substantially lower than the adopted topographic density used in Helmert's definition of heights.The same applies to geoid modeling errors.In this study,we investigate these errors in the Hong Kong territory,where topographic density is about 20%lower than the density of 2670 kg/m^(3).We use the digital rock density model to estimate the effect of topographic density variations on the geoid and orthometric heights.Our results show that this effect on the geoid and Helmert orthometric heights reach maxima of about 2.1 and 0.5 cm,respectively.Both results provide clear evidence that rock density models are essential in physical geodesy applications involving gravimetric geoid modeling and orthometric height determination despite some criticism that could be raised regarding the reliability of these density models.However,in regions dominated by sedimentary and igneous rocks,the geological information is essential in these applications because topographic densities are substantially lower than the average density of 2670 kg/m^(3),thus introducing large systematic errors in geoid and orthometric heights.

Sedimentary architecture of submarine channel-lobe systems under different seafloor topography:Insights from the Rovuma Basin offshore East Africa

Seafloor topography plays an important role in the evolution of submarine lobes.However,it is still not so clear how the shape of slope affects the three-dimensional(3-D)architecture of submarine lobes.In this study,we analyze the effect of topography factors on different hierarchical lobe architectures that formed during Pliocene to Quaternary in the Rovuma Basin offshore East Africa.We characterize the shape,size and growth pattern of different hierarchical lobe architectures using 3-D seismic data.We find that the relief of the topographic slope determines the location of preferential deposition of lobe complexes and single lobes.When the topography is irregular and presents topographic lows,lobe complexes first infill these depressions.Single lobes are deposited preferentially at positions with higher longitudinal(i.e.across-slope)slope gradients.As the longitudinal slope becomes higher,the aspect ratio of the single lobes increases.Lateral(i.e.along-slope)topography does not seem to have a strong influence on the shape of single lobe,but it seems to affect the overlap of single lobes.When the lateral slope gradient is relatively high,the single lobes tend to have a larger overlap surface.Furthermore,as the average of lateral slope and longitudinal slope gets greater,the width/thickness ratio of the single lobe is smaller,i.e.sediments tend to accumulate vertically.The results demonstrate that the shape of slopes more comprehensively influences the 3-D architecture of lobes in natural deep-sea systems than previously other lobe deposits and analogue experiments,which helps us better understand the development and evolution of the distal parts of turbidite systems.

Unveiling three-dimensional sea surface signatures caused by internal solitary waves:insights from the surface water ocean topography mission

Internal solitary waves(ISW),characterized by large amplitude and long propagation distance,are widespread in global oceans.While remote sensing images have played an essential role in studying ISWs,they mainly exploit two-dimensional image information.However,with the launch of the surface water ocean topography(SWOT)satellite on December 16,2022,a unique opportunity has emerged to capture wide-swath three-dimensional ISW-induced sea surface information.In this study,we examine ISWs in the Andaman Sea using data from the Ka-band Radar Interferometer(KaRIN),a crucial sensor onboard SWOT.KaRIN not only provides backscattering satellite images but also employs synthetic aperture interferometry techniques to retrieve wide-swath two-dimensional sea surface height measurements.Our observations in the Andaman Sea revealed the presence of ISWs characterized by dark-bright strips and surface elevation solitons.The surface soliton has an amplitude of 0.32 m,resulting in an estimation of ISW amplitude of approximately 60 m.In contrast to traditional two-dimensional satellite images or nadir-looking altimetry data,the SWOT mission’s capability to capture threedimensional sea surface information represents a significant advancement.This breakthrough holds substantial promise for ISW studies,particularly in the context of ISW amplitude inversion.

Influence of high-speed milling parameter on 3D surface topography and fatigue behavior of TB6 titanium alloy

High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.

Topographic effects on long offset transient electromagnetic response

The forward modeling procedure used in this article is formulated with the volume integral equation based on the tensor Green＇s function. The electromagnetic components responses are first calculated in the frequency domain and then transformed to the time domain by digital filtering. The valley and hill topography with a layered earth is stimulated by a horizontal electric dipole （HED） transmitter, which is common in field surveys, and the TEM responses are calculated at the transmitter and receivers. The topography effects on the long offset electromagnetic transient （LOTEM） responses are discussed in detail. The results show that both valley and hill topography has significant effect on the LOTEM measurement. If the HED is located in the bottom of a valley, the distortion of the observed anomalous field at distance is severe. A valley at the receiver locations show a strong effect but are localized in space and time. In general, hill-shaped topography shows smaller effects no matter where its located. When the topography is located between source and receivers, the influence is negligible. We conclude that the location of the source is much more important than the receivers and it is critical to put the transmitter in an open flat area in the field survey.

Design and Construction of Topographical Elements in Parks of Historical Relics

The protection and utilization of great historical sites mainly includes 4 modes,specifically,building the whole site into a park of historical relics;combining the site with the scenic area into a tourist site;building the site into a forest park;combining site protection with development of modern agriculture so as to build an agricultural park of historical and cultural relics.In this study,it was emphasized that landscape design of such parks should first be based on the protection of historical relics.Among all constructed parks of historical relics in China,Relics of Sweet Spring Palace,Tomb of the Military Marquis Zhuge Liang and Mausoleum of the Yellow Emperor were taken as examples to demonstrate how large-scale topographical elements form the spatial pattern of garden landscapes;Ruins of the Old Summer Palace and the Park of Qujiang Pool Relics were taken to show how moderate-scale topographical elements form the spatial division of garden landscapes;by giving examples of micro-relief slope utilization,micro-relief stone and water layout,utilization of original reliefs and micro-relief functions,this study illustrated how such micro-scale topographical elements form landscape nodes in gardens,and specifically introduced functions of micro-relief,such as dividing and controlling spaces,creating aesthetic value,improving micro-climate and so on.Moreover,cases of terrain utilization and creation in classical western gardens were given,and masterworks of some modern western garden designers were borrowed and analyzed to find valuable concepts for designing parks of historical relics in China.

Two-dimensional frequency-domain acoustic fullwaveform inversion with rugged topography

We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.

Distribution of ice thickness and subglacial topography of the "Chinese Wall" around Kunlun Station,East Antarctica

As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese National Antarctic Research Expedition,2007/08）,the research team used a deep ice-penetrating radar system to measure the ice thickness and subglacial topography of the ＂Chinese Wall＂ around Kunlun Station,East Antarctica.Preliminary results show that the ice thickness varies mostly from 1600 m to 2800 m along the ＂Chinese Wall＂,with the thickest ice being 3444 m,and the thinnest ice 1255 m.The average bedrock elevation is 1722 m,while the minimum is just 604 m.Compared with the northern side of the ice divide,the ice thickness is a little greater and the subglacial topography lower on the southern side,which is also characterized by four deep valleys.We found no basal freeze-on ice in the Gamburtsev Subglacial Mountains area,subglacial lakes,or water bodies along the ＂Chinese Wall＂.Ice thickness and subglacial topography data extracted from the Bedmap 2 database along the ＂Chinese Wall＂ are consistent with our results,but their resolution and accuracy are very limited in areas where the bedrock fluctuates intensely.The distribution of ice thickness and subglacial topography detected by ice-penetrating radar clarifies the features of the ice sheet in this ＂inaccessible＂ region.These results will help to advance the study of ice sheet dynamics and the determination of future locations of the GSM＇s geological and deep ice core drilling sites in the Dome A region.