Study of the Conversion of Postconsumer Polystyrene on CeO2/HZSM-5 Type Materials

The catalytic conversion of polystyrene (PS) was studied in the presence of the materials type HZSM-5, CeO2, 10% CeO2/HZSM-5 and 20% CeO2/HZSM-5, which were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and nitrogen adsorption at 77K. The catalytic tests were performed via thermogravimetric analysis (TG) at heating rates of 5, 10 and 20˚C min−1 in a temperature range from 30˚C to 900˚C. For the tests, a ratio of 30% by mass of each catalytic material mixed with PS was used and the activation energy of the degradation process was determined by the Vyazovkin method. The obtained results showed that the addition of the catalyst to the PS in general reduced its degradation temperature. The 10% CeO2/HZSM-5 catalyst showed greater efficiency, as it resulted in lower activation energy for PS degradation. Thus, the combination of CeO2 with HZSM-5 resulted in materials with potential for application in the catalytic degradation of polystyrene and the results indicate that the production of a composite material can be a good strategy to generate an increase in catalytic activity and a decrease in energy process activation.

Effects of Light Rare Earth on Acidity and Catalytic Performance of HZSM-5 Zeolite for Catalytic Cracking of Butane to Light Olefins

The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by the impregnation of the ZSM-5 type zeolites（Si/Al=64：1）with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B（Lewis acid/Brnsted acid）,but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature （excluding 800 ℃）. The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.

Effects of Operating Conditions on the Catalytic Performance of HZSM-5 Zeolites in n-Pentane Cracking

In this work,n-pentane catalytic cracking over HZSM-5 zeolites was studied at 650°C under atmosphere pressure.A particular attention was paid to the measurement of n-pentane conversion,light olefins production,product distribution,coke deposit,etc.Several indexes were defined to evaluate the effects of operating conditions on the catalytic performance of HZSM-5 zeolites.It was found that decreasing the weight hourly space velocity,increasing the reactant partial pressure,and increasing the carrier gas flow rate could inhibit C-H bond breaking and enhance the C-C bond breaking and hydride transfer reactions,leading to reduced alkenes selectivity,which suppressed the formation of external coke and alleviated the deactivation of HZSM-5 zeolites.It was deduced that the catalytic stability of HZSM-5 zeolites was improved at the cost of alkenes selectivity.Compared with decreasing the weight hourly space velocity and increasing the reactant partial pressure,increasing the carrier gas flow rate could enhance the diffusion process and protect alkenes from being consumed in coke formation in order to improve the catalytic stability of HZSM-5 zeolites with less reduction of alkenes selectivity.

Enhancing the Deactivation Durability of Nano-sized HZSM-5 for Aromatization by Adjusting its Ratio of Lewis/Brφnsted Acid Sites

Ratio of Lewis/Brfnsted acid sites (Cl/Cb) on the surface of nano-sized HZSM-5 was successfully manipulated by means of steaming and acid leaching. Significant enhancement of the deactivation durability of nano-sized HZSM-5 in the aromatization of fluid catalytic cracking (FCC) gasoline olefins seems to be closely related to the increase of Lewis/Brfnsted acid sites ratio.

Properties and Characterization of Modified HZSM-5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673 K were investigated. The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desorption (TPD) of ammonia. The structure of the samples was characterized by XRD, and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy (SEM). The XRD results show that the modified samples have no novel crystalline phase, indicating a high dispersion of phosphorus and boron species. After treatment, the microporous volume and surface area of the samples markedly decrease, implying the blockage of the channel. The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type I and IV, and all hysteresis loops resemble the H4-type in the IUPAC classification. The total acidity of the modified samples, determined by pyridine adsorption IR and TPD of ammonia, decreases in contrast to that of the parent HZSM-5. The conversion of n-heptane over P and B steam-modified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.

Methane dehydro-aromatization over Mo/HZSM-5 catalysts in the absence of oxygen:Effect of steam-treatment on catalyst stability

The effect of steam-treatment to HZSM-5 zeolite and Mo/HZSM-5 with a steaming time range of 0.5-1 h on the catalytic performance of methane dehydro-aromatization （MDA） over Mo/HZSM-5 catalyst prepared with impregnation has been studied in detail in combination with the characterization of 1H MAS NMR technique. Both the deactivation rate constant （kd） and the Brtnsted acid sites per unit cell were calculated to quantitatively evaluate the stability of Mo/HZSM-5 catalysts treated with steam at 813 K before and after impregnation of molybdenum species, and the corresponding variation of their Brtnsted acid sites. The results reveal that a V-shape relationship between kd and the number of B 1 acid sites per unit cell is presented on Mo/HZSM-5 catalyst under the tested steam-treatment and reaction conditions.

Studies on Mo/HZSM-5 Complex Catalyst for Methane Aromatization

The influence of adding Fe, Cr, Co, and Ga into 3%Mo/HZSM-5 catalyst on methane aromatization, and the influence of additives ratio on methane conversion, selectivity to hydrocarbons and coke, as well as distribution of aromatics were investigated. The experimental results showed that the addition of Fe, Cr, Co and Ga promoted the dehydrogenation and dissociation of methane. The results of NH3-TPD indicated that the acidity of HZSM-5 was changed by adding Fe and Co components, consequently the catalytic properties of Mo/HZSM-5 were changed. It was also revealed that strong acid sites were the center of methane aromatization. The results of XRD characterization showed that the crystallinity of Mo on ZSM-5 zeolite was increased after adding Fe, Co additives.

Catalytic activity of phosphorus and steam modified HZSM-5 and the theoretical selection of phosphorus grafting model

The modification of HZSM-5 zeolite with phosphorus and steam has been studied. Results show that 1% phosphorus and steam modified HZSM-5 has the highest catalytic activity for n-heptane. Physicochemical and catalytic properties of 1% phosphorus and steam modified HZSM-5 zeolites have been investigated. The X-ray diffraction （XRD） results exhibit that there is considerable variation in the relative intensity of the individual diffraction peaks. The acidity of the samples decreases with an increase in the steaming temperature, which is determined by the IR of adsorbed pyridine and temperature programmed desorption （TPD） of ammonia. The oxidation state of phosphorus shown by XPS is ＋5, and a model for surface structure modification is proposed. The nitrogen adsorption isotherm for all samples is a combination of type I and type IV, all hysteresis loops resemble the H4-type. The density functional and cluster model methods have been invoked to select the phosphorus grafting model, and it was found that the phosphorus grafting model were more probable in the form of the terminal oxygen coordinating with aluminum.

FINE CONTROL OF HZSM-5'S PORE-OPENING SIZE BY A NEW CVD METHOD

A new CVD method without vacuum condition（CVDWV）was designed in this study,ithad been found that by modifying the flow rate of the carrier gas（N2）and the temperature of sur-face reaction,silicon saturator and sample tube,the amount of silica deposited on the external sur-face of the zeolite could be precisely controlled,The changes in the physicochemical properties ofzeolite,such as pore-opening size,acidity and reaction property were investigated.The results ob-tained showed that:modification of the improved CVD method did not change the internal structureand acidity of the zeolite,but could bring about significant change of pore-opening size and reactionproperty as desired.

Catalyst activity comparison of alcohols over zeolites

Alcohol transformation to transportation fuel-range hydrocarbon over HZSM-5 （SIO2/A1203 = 30） catalyst was studied at 360 C and 300 psig. Product distributions and catalyst life were compared between methanol, ethanol, 1-propanol and 1-butanol as a feed. The catalyst life for 1-propanol and l-butanol was more than double compared with that for methanol and ethanol. For all the alcohols studied, the product distributions （classified to paraffin, olefin, naphthene, aromatic and naphthalene compounds） varied with time on stream （TOS）. At 24 h TOS, liquid product from 1-propanol and 1-butanol transformation primarily contains higher olefin compounds. The alcohol transformation process to higher hydrocarbon involves a complex set of reaction pathways such as dehydration, oligomerization, dehydrocyclization and hydrogenation. Compared with ethylene generated from methanol and ethanol, oligomerization of propylene and butylene has a lower activation energy and can readily take place on weaker acidic sites. On the other hand, dehydrocyclization of the oligomerized products of propylene and butylene to form the cyclic compounds requires the sites with stronger acid strength. Combination of the above mentioned reasons are the primary reasons for olefin rich product generated in the later stage of the time on stream and for the extended catalyst life time for 1-propanol and 1-butanol compared with methanol and ethanol conversion over HZSM-5.

Catalytic fast pyrolysis of Kraft lignin with HZSM-5 zeolite for producing aromatic hydrocarbons

Catalytic fast pyrolysis （CFP） of Kraft lignins with HZSM-5 zeolite for producing aromatics was investigated using analytical pyrolysis methods. Two Kraft lignins were fast pyrolyzed in the absence and presence of HZSM-5 in a Curie-point pyrolyzer. Without the catalyst, fast pyrolysis of lignin predominantly produced phenols and guaiacols that were derived from the subunits of lignin. However, the presence of HZSM-5 changed the product distribution dramatically. As the SiO2/ A1203 ratio of HZSM-5 decreased from 200 to 25 and the catalyst-to-lignin ratio increased from 1 to 20, the lignin- derived oxygenates progressively decreased to trace and the aromatics increased substantially. The aromatic yield increased considerably as the pyrolysis temperature increased from 500~C to 650~C, but then decreased with yet further increase of pyrolysis temperature. Under optimal reaction conditions, the aromatic yields were 2.0 wt.% and 5.2 wt.% for the two lignins that had effective hydrogen indexes of 0.08 and 0.35.

TEMPERATURE PROGRAMMED DESORPTION AND THERMAL DECOMPOSITION OF n-BUTYLAMINE ON ZEOLITE HZSM-5

Ⅰ. NTRODUCTIONIn order to explain the catalytic properties of zeolite HZSM-5, it is necessary to know the nature, number and strength distribution of acid sites of zeolite, and the temperature programmed desorption (TPD) of ammonia or pyridine is one of the most commonly-used methods. Compared with ammonia (pK_b=4.75) and pyri-

Modification of acidity of Mo-Fe/HZSM-5 zeolite via argon plasma treatment

TheNH_(3)-TPDcharacterization wasconducted to confirm that the acidity of Mo-Fe/HZSM-5 zeolite could be selectively modified via the glow discharge plasma treatment.The plasma catalyst treatment could totally change the distribution of aromatic products with higher methane conversion compared to the untreated catalyst.Some polycyclic aromatics such as anthracene,pyrene and phenanthrene were also produced over the plasma treated catalyst,in addition to benzene,toluene and naphthalene,which were normally obtained over the untreated catalyst.

Hg^0 removal from flue gas over different zeolites modified by Fe Cl_3

The elemental mercury removal abilities of three different zeolites（Na A, Na X, HZSM-5）impregnated with iron（Ⅲ） chloride were studied on a lab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy,X-ray photoelectron spectroscopy, and temperature programmed desorption（TPD） analyses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg0, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury（Hg0）into oxidized mercury（Hg2＋）. The crystallization of Na Cl due to the ion exchange effect during the impregnation of Na A and Na X reduced the number of active Cl species on the surface, and restricted the physisorption of Hg0. Therefore, the Hg0 removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of Fe Cl3–HZSM-5 was mainly in the form of mercuric chloride（Hg Cl2）, while on Fe Cl3–Na X and Fe Cl3–Na A it was mainly mercuric oxide（HgO）.

Acid modified carrier on catalytic oxidation of dichloromethane over CeO_(2)/HZSM-5 catalysts

In this study,a series of Hydrogen-Zeolite Socony Mobil-5-X(HZSM-5-X) catalysts were prepared by acid modification,then Ce/HZSM-5-X(X=0,0.2,0.4,1.0,2.0) catalysts were prepared by impregnation method.The catalytic performance of the catalysts on dichloromethane(DCM) oxidation was investigated.Through different characterizations,HZSM-5-X exhibit high specific surface area,good redox ability,rich acidity and much suitable acidic site distribution after acid treatment.Among them,Ce/HZSM-5-0.4 shows better catalytic activity with the lowest by-product and the best CO_(2) yield.Its T_(90) is 302℃ and the CO_(2) yield of T_(90) is more than 80 wt%,which demonstrates that the acid modification of carrier plays the positive effect on the catalytic capacity for DCM oxidation.

Study on Reaction of Thiophene Compounds and Olefins for Deep Desulfurization of Gasoline

The HY,Hβ,HZSM-5,and SAPO-11 zeolites were investigated in the alkylation reaction of thiophene and olefins.As a result,some sulfur-containing impurities could be converted to higher molecular weight components with their boiling point being in the range of diesel fraction.HZSM-5 had the highest activity and selectivity of desulfurization.At the same time,extensive oligomerization of olefins was not found and coke yield was very low,which could lead to high yield of gasoline products.The main reaction mechanism verifies that the second order alkylation reaction can be carried out on the outer surface and/or pores of the catalyst.The catalytic performance of the HZSM-5 catalyst which is poisoned by 2,4-dimethylquinoline during alkylation to form larger molecules of sulfur compounds is obviously weakened due to the decrease of the acid sites on the outer surface and at the mouth of pores.

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis（f MAP） of corn stover for bio-oil production was investigated in the presence of microwave absorbent（Si C） and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1：100 to 1：20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.