A Review on Engineering Transition Metal Compound Catalysts to Accelerate the Redox Kinetics of Sulfur Cathodes for Lithium–Sulfur Batteries

Engineering transition metal compounds(TMCs)catalysts with excellent adsorption-catalytic ability has been one of the most effec-tive strategies to accelerate the redox kinetics of sulfur cathodes.Herein,this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping,bimetallic/bi-anionic TMCs,and TMCs-based heterostructure composites.It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band,d/p-band center,electron filling,and valence state.Moreover,the elec-tronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity,electron filling,and ion radius,resulting in electron redistribution,bonds reconstruction,induced vacancies due to the electronic interaction and changed crystal structure such as lat-tice spacing and lattice distortion.Different from the aforementioned two strategies,heterostructures are constructed by two types of TMCs with different Fermi energy levels,which causes built-in electric field and electrons transfer through the interface,and induces electron redistribution and arranged local atoms to regulate the electronic structure.Additionally,the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out.It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.

Vanadium-based compounds and heterostructures as functional sulfur catalysts for lithium-sulfur battery cathodes

Lithium-sulfur(Li-S)batteries have attracted wide attention for their high theoretical energy density,low cost,and environmental friendliness.However,the shuttle effect of polysulfides and the insulation of active materials severely restrict the development of Li-S batteries.Constructing conductive sulfur scaffolds with catalytic conversion capability for cathodes is an efficient approach to solving above issues.Vanadium-based compounds and their heterostructures have recently emerged as functional sulfur catalysts supported on conductive scaffolds.These compounds interact with polysulfides via different mechanisms to alleviate the shuttle effect and accelerate the redox kinetics,leading to higher Coulombic efficiency and enhanced sulfur utilization.Reports on vanadium-based nanomaterials in Li-S batteries have been steadily increasing over the past several years.In this review,first,we provide an overview of the synthesis of vanadium-based compounds and heterostructures.Then,we discuss the interactions and constitutive relationships between vanadium-based catalysts and polysulfides formed at sulfur cathodes.We summarize the mechanisms that contribute to the enhancement of electrochemical performance for various types of vanadium-based catalysts,thus providing insights for the rational design of sulfur catalysts.Finally,we offer a perspective on the future directions for the research and development of vanadium-based sulfur catalysts.

Catalytic removal of volatile organic compounds using ordered porous transition metal oxide and supported noble metal catalysts

Most of volatile organic compounds （VOCs） are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.

Ni-Co/Mg-Al catalyst derived from hydrotalcite-like compound prepared by plasma for dry reforming of methane

Ni-Co bimetallic catalysts with different Ni/Co content were derived from cold plasma jet decomposition and reduction of hydrotalcite-like compounds containing Ni,Co,Mg and Al,and their catalytic performance was investigated with dry reforming of methane.Experimental results showed that the hydrotalcite-like precursors could be completely decomposed and partly reduced by cold plasma jet,and the Nicontained catalysts exhibited much higher activity than the catalyst without Ni.Especially,the catalyst with Ni/Co ratio of 8/2 achieved not only the highest conversions of 80.3%and 69.3%for CH4 and CO2,respectively,but also the best stability in 100 h testing.The catalysts were characterized by XRD,XPS,TEM and N2 adsorption techniques,and the results showed that the better performance of the 8Ni2Co bimetallic catalyst was attributed to its higher metal dispersion,smaller metal particle size,as well as the interaction effect between Ni and Co,which were brought by the special catalyst preparation method.

Hydrogen production via steam reforming of bio-oil model compounds over supported nickel catalysts

The steam reforming of four bio-oil model compounds（acetic acid,ethanol,acetone and phenol） was investigated over Ni-based catalysts supported on Al2O3 modified by Mg,Ce or Co in this paper.The activation process can improve the catalytic activity with the change of high-valence Ni（Ni2O3,NiO） to low-valence Ni（Ni,NiO）.Among these catalysts after activation,the Ce-Ni/Co catalyst showed the best catalytic activity for the steam reforming of all the four model compounds.After long-term experiment at 700°C and the S/C ratio of 9,the Ce-Ni/Co catalyst still maintained excellent stability for the steam reforming of the simulated bio-oil（mixed by the four compounds with the equal masses）.With CaO calcinated from calcium acetate as CO2 sorbent,the catalytic steam reforming experiment combined with continuous in situ CO2 adsorption was performed.With the comparison of the case without the adding of CO2 sorbent,the hydrogen concentration was dramatically improved from 74.8% to 92.3%,with the CO2 concentration obviously decreased from 19.90% to 1.88%.

Inhibiting effect of tungstic compounds on glucose hydrogenation over Ru/C catalyst

The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed that HC1, H2SO4, H3BO3, H3PO4, and HNO3 had negligible effect, while all the tungstic compounds imposed inhibiting effects on the hydrogenation of glucose over Ru/C catalyst, and the suppressing effect followed the order of H2WO4〉HPW〉WO3〉AMT〉HSiW. This order is the same as the order of ethylene glycol （EG） yields in the one-pot conversion of glucose to EG, suggesting the important role of competition between glucose hydrogenation and retro-aldol condensation in controlling the selectivity of EG.

Reduction of Sulphur-containing Aromatic Nitro Compounds with Hydrazine Hydrate over Iron(III) Oxide-MgO Catalyst

Sulphur-containing aromatic amines were prepared efficiently in good to excellent yields by reduction of the corresponding sulphur-containing aromatic nitro compounds with hydrazine hydrate in the presence of iron（Ⅲ） oxide-MgO catalyst. The catalyst exhibited high activity and stability for the reduction of sulphur-containing aromatic nitro compounds. The yields of sulphur-containing aromatic amines were up to 91-99 % at 355 K after reduction for 1-4 h over this catalyst.

Preparation of Sulphur-containing Aromatic Amines by Reduction of the Corresponding Aromatic Nitro Compounds with Hydrazine Hydrate over Iron Oxide Hydroxide Catalyst

Sulphur-containing aromatic nitro compounds were rapidly reduced to the corresponding amines in high yields by employing hydrazine hydrate as a hydrogen donor in the presence of iron oxide hydroxide catalyst. It was worth noting that the catalyst exhibited extremely high activity. The reduction could be completed within 20-50 min and the yields were up to 97-99 %.

Preparation of M2O3-CeO2(M=La,Fe,and Al) Compoundoxide Catalyst and Its Degradation Performance

As one of the most active rare earths,CeO2 has caused extensive concern due to its multifunctional properties.CeO2-based compound oxide of M2O3-CeO2(M=La,Fe,and Al)were prepared by coprecipitation and impregnation methods.The photocatalytic performance of the samples for the degradation methylene blue was studied under UV and visible light irradiation.The effects of constituents on the properties of the CeO2-based catalysts were investigated by XRD,TEM,BET,and UV-Vis spectrophotometer.The highest degradation of methylene blue under 230W UV light was almost 100%at 50 min by La2O3/Fe2O3-CeO2/γ-Al2O3 catalyst and 99.42%at 50 min by Fe2O3-CeO2/γ-Al2O3 catalyst.The methylene blue removal efficiency under indoor natural light reaches 93.81%by La2O3/Fe2O3-CeO2/γ-Al2O3 catalyst and 92.34%by Fe2O3-CeO2/γ-Al2O3 catalyst at 50 min.The order of catalytic degradation activity is La2O3/Fe2O3-CeO2/γ-Al2O3>Fe2O3-CeO2/γ-Al2O3>La2O3-CeO2/γ-Al2O3>Al2O3,owing to their structural features.The doping of La^3+or Fe3+onto CeO2/γ-Al2O produced much more oxygen vacancies under light irradiation and reduced the energy laps of CeO2 with value of 2.86 ev,which improved the photocatalytic redox performance of the composite oxide.

Electronic Effect of Carbon Support on Pt Catalyst Supported on Graphite Intercalation Compound

Graphite intercalation compounds（GIC） were tested as an experimental model for studying the electronic effect of carbon support on the catalytic activity and poisoning tolerance of Pt catalyst for direct methanol fuel cells. The GIC samples with different intercalation degrees were prepared by electrolyzing graphite flake in H2SO4 for varying the periods of time. The GIC-supported Pt catalyst was deposited electrochemically. The catalytic activity and poisoning tolerance of the GIC-supported Pt catalysts were evaluated. It was found that GIC with sulfate anion as intercalate was able to catalyze methanol electrooxidation, which could be related to the positive charges generated on the graphite layer upon intercalation. As intercalation degree increased, the catalytic activity of the GIC-supported Pt catalyst decreased while the poisoning tolerance improved. This suggests that electron donation from support to catalyst had great effect on both catalytic activity and poisoning tolerance of Pt catalyst. And intercalation can be adopted as another important way to make modification on carboneous catalyst support.

I₂/Nanostructured Pyrophosphate : A Mild and Efficient Catalyst for the Selective Protection of Carbonyl Compounds

A new solvent free method for protection of carbonyl compounds as their thioacetals has been accomplished through the use of iodine supported on nanostructured pyrophosphate. Advantages of the methodology include very short reaction time, the requirement for minimum amounts of catalyst, the remarkably simple experimental procedure, and no necessity for solvents or inert atmospheres, excellent yields and recyclability of the catalyst used. An efficient method for the chemoselective thioacetalization of ketones in the presence of aldehydes using I2/nanostructured pyrophosphate is also reported in this article. The nanostructured pyrophosphate was characterized by scanning electron microscopy, X-ray diffraction, infrared spectroscopy, Transmission electron microscopy and thermal gravimetric analysis, respectively.

SYNTHESIS OF ALLANTOIN USING HETEROPOLY COMPOUNDS AS CATALYSTS

Allantoin was synthesized with the yield as high as 68.5% using H3PW12O40. xH(2)O as catalyst. Optimum conditions for the synthesis were determined. It. was found that the heteropoly compound has higher catalytic activity than conventional inorganic acid catalysts (such as hydrochloric acid, etc.)

PtCoNi ternary intermetallic compounds anchored on Co,Ni and N co-doped mesoporous carbon:Synergetic effect between PtCoNi nanoparticles and doped mesoporous carbon promotes the catalytic activity

Highly active and robust electrocatalysts are desired for proton exchange membrane fuel cells.Pt-based intermetallic compounds(IMCs) have been recognized as one of the most promising low-platinum catalysts for fuel cells(FCs).Herein,we report a high-performance IMCs by anchoring ordered PtCoNi ternary nanoparticles on the N,Co and Ni co-doped dodecahedral mesoporous carbon(DMC).While the introduced Co and Ni participate in the formation of PtCoNi IMCs,some of them are doped in the mesoporous carbon and coordinated by N to form Co-N_(y)/Ni-N_(z)dual active centers,which further enhances the electrocatalytic activity towards oxygen reduction reaction.Moreover,the addition of Ni results in a negative shift of the d-band center of Pt as compared to the Pt/DMC and Pt_(3)Co/DMC,making it easier to adsorb oxygen on the surface.As expected,our optimal sample Pt_(3)Co_(0.7)Ni_(0.3)/DMC exhibits excellent performance with mass activity and specific activity of 1.32 A mgPt-1and 1.98 mA cm^(-2)at 0.9 V,which are 7.33and 6.19 times that of commercial Pt/C,respectively.The Pt_(3)Co_(0.7)Ni_(0.3)/DMC also reveals much better cathodic performance in an H2-air single fuel cell than commercial Pt/C catalyst with a power density of0.802 W cm^(-2).This work provides critical sights into constructing efficient catalysts by ternary intermetallic strategy and synergetic effect between active components and support.

Sub-nanometer Pt_(2)In_(3) intermetallics as ultra-stable catalyst for propane dehydrogenation

Pt-based catalysts are the typical industrial catalysts for propane dehydrogenation(PDH),which still suffer from insufficient lo ng-term durability due to the structu ral instability and coke deposition.A commercial γ-Al_(2)O_(3) supported thermally robust sub-nanometer Pt2In3intermetallic catalyst with atomically ordered structure and rigorously separated Pt single atoms was fabricated,which showed outstanding robustness in 240 h long-term operation at 600℃ with the deactivation rate constant kdas low as0.00078 h^(-1), ranking among the lowest reported values.Based on various in situ characterizations and theoretical calculations,it was proved that the catalyst stability not only resulted from the separated Pt single-atom sites but also significantly affected by the distance of adjacent Pt atoms.An increasing distance to 3.25 A in the Pt_(2)In_(3)could induce a weak π-adsorption configuration of propylene on Pt sites,which facilitated the desorption of propylene and restrained the side reactions like coking.

Review on Metal-Acid Tandem Catalysis for Hydrogenative Rearrangement of Furfurals to C_(5) Cyclic Compounds

Hydrogenative rearrangement of biomas s-derived furfurals(furfural and 5-hydroxymethyl furfural) to C_(5) cyclic compounds(such as cyclopentanones and cyclopentanols) offers an expedient reaction route for acquiring O-containing value-added chemicals thereby replacing the traditional petroleum-based approaches.The scope for developing efficient bifunctional catalysts and establishing mild reaction conditions for upgrading furfurals to cyclic compounds has stimulated immense deliberation in recent years.Extensive efforts have been made toward developing catalysts for multiple tandem conversions,including those with various metals and supports.In this scientific review,we aim to summarize the research progress on the synergistic effect of the metal-acid sites,including simple metal-supported acidic supports,adjacent metal acid sites-supported catalysts,and in situ H_(2)-modified bifunctional catalysts.Distinctively,the catalytic performance,catalytic mechanism,and future challenges for the hydrogenative rearrangement are elaborated in detail.The methods highlighted in this review promote the development of C_(5) cyclic compound synthesis and provide insights to regulate bifunctional catalysis for other applications.

复合型内给电子体ID对MgCl_(2)/2-乙基己醇/TiCl_(4)催化体系催化乙烯聚合性能的影响

以MgCl_(2)/2-乙基己醇/TiCl_(4)体系合成用于乙烯聚合的球形Ziegler-Natta催化剂,在合成催化剂过程中加入复合内给电子体:乙酸正己酯/邻酞酸二异丁酯,与分别加入四乙氧基硅烷、乙酸乙酯和邻酞酸二异丁酯内给电子体的催化剂进行对比。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和差示扫描量热仪(DSC)等手段对含不同内给电子体的催化剂和聚合物进行分析,并通过乙烯聚合对催化剂催化性能进行评价。结果表明,在温度为80℃,压力0.5 MPa,时间2 h的条件下,含复合内给电子体乙酸正己酯/邻酞酸二异丁酯的催化剂催化乙烯聚合活性比其它单一内给电子体的催化剂催化活性要高,催化活性为1.24×10^(5)g PE/(mol_(Ti)·h)。

氢化改性钒基催化剂降解氯苯的机理研究

为了在低温下高效、稳定地降解挥发性氯代有机污染物(CVOCs),以偏钒酸铵为VO_(x)前驱体制备2D纳米片与3D纳米结构的互穿多孔网络结构的L-V_(2)O_(5)催化剂,并通过氢化技术对催化剂中部分V^(5+)进行还原(H-V_(2)O_(5))。结果表明,该氢化技术降低了催化剂中部分V^(5+)的化学价态,增加了V—O(Ⅱ)和V—O(Ⅳ)上的氧空位数量和催化剂表面活性氧数量。在275℃时,相较于L-V_(2)O_(5),H-V_(2)O_(5)对氯苯催化降解的效率提高了约40%。

催化氧化VOCs催化剂中毒机制研究进展

催化氧化法是目前处理挥发性有机物(VOCs)最有效的治理技术之一,但催化剂中毒问题阻碍着催化剂的应用与催化氧化技术的发展。本文介绍了催化氧化VOCs催化剂中毒机制,综述了进行VOCs催化氧化反应的活性测试以及对失活的催化剂进行分析表征两种研究催化剂中毒方法的研究进展。指出:设计出针对性强、抗中毒性能良好且具有大规模工业应用前景的催化剂将是未来的研究方向。