Nanocrystalline Nd 8.5 Fe 75 Co 5Cu 1Zr 3Nb 1B 6.5 ribbons were prepared by melt spun (18 m·s -1 ) and subsequent heat treatment (670 ℃/4 min). Excellent magnetic properties of the bonded m...Nanocrystalline Nd 8.5 Fe 75 Co 5Cu 1Zr 3Nb 1B 6.5 ribbons were prepared by melt spun (18 m·s -1 ) and subsequent heat treatment (670 ℃/4 min). Excellent magnetic properties of the bonded magnet were achieved as follows: B r=0.68 T (6 8 kGs), J H c=620.3 kA·m -1 (7.8 kOe), ( BH ) max =74 kJ·m -3 (9 3 MGOe). The results of TEM photomicrographs confirm that the appearance of α Fe phase is earlier than that of Nd 2Fe 14 B phase during crystallization process. The addition of Cu and Zr elements shows to be advantageous to the improvement of an intrinsic coercivity and squareness of hysteresis loop, as well as energy product.展开更多
During the process of directional solidification,laser remelting/solidification in the layer on sintered magnets, die-upsetting of cast magnets,or die-upsetting of nano-composites,the arrangements of the easy-magnetiz...During the process of directional solidification,laser remelting/solidification in the layer on sintered magnets, die-upsetting of cast magnets,or die-upsetting of nano-composites,the arrangements of the easy-magnetization-axes of the hard magnetic phases(Nd2Fe14B,SmCo5 or Sm2Co17 type)in their designed directions have been studied.In Fe-Pt nano-composite magnets,attempts have been taken to promote phase transformation from disordered,soft magnetic A1 to ordered,hard magnetic L10 FePt phase at reduced temperatures.The dependence of the magnetization and reversal magnetization processes on the microstructures,involving the morphology and three critical sizes of particles of the FePt nano-composite magnets,are summarized. With the decrease of the nominal thickness of the anisotropic FePt film epitaxially grown on the single crystal MgO(001)substrate, the reversal magnetization process firstly changes from full domain wall displacement to partial magnetic wall pinning related to the morphology change,where the coercive force increases abruptly.The reversal magnetization process secondly changes from magnetic wall pinning to incoherent magnetization rotation associated with the particles being below the first critical size at which multi-domain particles turn into single domain ones,where the coercive force is still increased.And the reversal magnetization mode thirdly changes from incoherent to coherent rotation referred to the second critical size,where the increase of the coercive force keeps on.However,when the particle size decreases to approach the third critical size where the particles turn into the supperparamagnetic state,the coercive force begins to decrease due to the interplay of the size effect and the incomplete ordering induced by the size effect.Meanwhile,due to the size effect,Curie temperature of the ultra-small FePt particles reduces.展开更多
For nanophase (Nd, Pr)FeB/α-Fe composite alloys were prepared by melt spinning, the appreciable addition of Zr reduces their average grain size. Observed by atom force microscopy (AFM), the average grain diameter of ...For nanophase (Nd, Pr)FeB/α-Fe composite alloys were prepared by melt spinning, the appreciable addition of Zr reduces their average grain size. Observed by atom force microscopy (AFM), the average grain diameter of crystallized ribbons on their free surface, reduces from 175 nm of Zr-free alloy to 79 nm of Zr-1at%, by about 55%. If the concentration exceeds 1%, the effects of Zr on fining grain size are evidently weakened. The average grain size on free surface of Zr-1.5at% is 72 nm. With the addition of 1at% Zn, the bonded magnets has the best combination of properties: B_r=0.675 T, H_(ci)=616 kA·m^(-1), (BH)_(max)=77 kJ·m^(-3). Below 1at%, the coarser grains lead to a lower magnetic property. Beyond 1at%, the layer of Zr-rich intergranular phase will thicken, which results in weakening of the exchange coupling among adjacent grains, and then causes degrading of magnetic properties of magnets.展开更多
By using sub-overquenching and annealing method which has a wide processing window, (Nd, Pr), ( Fe-CoZr)(94-x)B-6(x = 12, 10.5, 10, 9) bonded magnets were prepared and the effect of rare earths content on magnetic pro...By using sub-overquenching and annealing method which has a wide processing window, (Nd, Pr), ( Fe-CoZr)(94-x)B-6(x = 12, 10.5, 10, 9) bonded magnets were prepared and the effect of rare earths content on magnetic properties was investigated. Being spun at sub-ove.quenching speed the as-spun ribbons consist of amorphous phases mixed with fine crystallites. After crystallization under optimum annealing conditions and bonded with 3.25% (mass fraction) epoxy, the magnets obtained the optimum magnetic properties. The rare earths content directly determines the magnetic properties. With the reduction of rare earths content, B-r increases but H-ci and (BH)(max) decrease. x = 10 is the critical value for the magnetic proper-ties change. Below this value, Br increases slowly meanwhile H-ci and (BH)(max) decrease strongly because alloy contains extra fractions of soft magnetic phase which are not coupled with the hard magnetic phase.. This experimental result is consistent with the calculated results using the model of volume fraction of soft magnetic phase coupled completely suggested.展开更多
The effect of exchange-coupling interaction on the effective anisotropy and its varying tendency in nanocrystalline single-phase NdFeB permanent magnetic material have been investigated. The results show that the exch...The effect of exchange-coupling interaction on the effective anisotropy and its varying tendency in nanocrystalline single-phase NdFeB permanent magnetic material have been investigated. The results show that the exchange-coupling interaction between grains makes the effective anisotropy of material, Keff, decrease with the reduction of grain size. The variation of Keff is basically the same as that of coercivity. The decrease in effective anisotropy is the main reason of the reduction of coercivity for nanocrystalline single-phase NdFeB permanent magnetic material. In order to get high anisotropy and coercivity in nanocrystalline single-phase NdFeB permanent material, the grain size should be larger than 35 nm.展开更多
文摘Nanocrystalline Nd 8.5 Fe 75 Co 5Cu 1Zr 3Nb 1B 6.5 ribbons were prepared by melt spun (18 m·s -1 ) and subsequent heat treatment (670 ℃/4 min). Excellent magnetic properties of the bonded magnet were achieved as follows: B r=0.68 T (6 8 kGs), J H c=620.3 kA·m -1 (7.8 kOe), ( BH ) max =74 kJ·m -3 (9 3 MGOe). The results of TEM photomicrographs confirm that the appearance of α Fe phase is earlier than that of Nd 2Fe 14 B phase during crystallization process. The addition of Cu and Zr elements shows to be advantageous to the improvement of an intrinsic coercivity and squareness of hysteresis loop, as well as energy product.
基金Project(2004CCA04000)supported by the National Basic Research Program of ChinaProject(50744014)supported by the National Natural Science Foundation of China+3 种基金Project(2008C21046)supported by Science and Technology Department of Zhejiang Province,ChinaProject(Y406389)supported by Zhejiang Provincial Natural Science Foundation of ChinaProject(2006B100054)supported by Ningbo Bureau of Science and Technology,ChinaProject supported by K.C.Wong Magna Found in Ningbo University,China
文摘During the process of directional solidification,laser remelting/solidification in the layer on sintered magnets, die-upsetting of cast magnets,or die-upsetting of nano-composites,the arrangements of the easy-magnetization-axes of the hard magnetic phases(Nd2Fe14B,SmCo5 or Sm2Co17 type)in their designed directions have been studied.In Fe-Pt nano-composite magnets,attempts have been taken to promote phase transformation from disordered,soft magnetic A1 to ordered,hard magnetic L10 FePt phase at reduced temperatures.The dependence of the magnetization and reversal magnetization processes on the microstructures,involving the morphology and three critical sizes of particles of the FePt nano-composite magnets,are summarized. With the decrease of the nominal thickness of the anisotropic FePt film epitaxially grown on the single crystal MgO(001)substrate, the reversal magnetization process firstly changes from full domain wall displacement to partial magnetic wall pinning related to the morphology change,where the coercive force increases abruptly.The reversal magnetization process secondly changes from magnetic wall pinning to incoherent magnetization rotation associated with the particles being below the first critical size at which multi-domain particles turn into single domain ones,where the coercive force is still increased.And the reversal magnetization mode thirdly changes from incoherent to coherent rotation referred to the second critical size,where the increase of the coercive force keeps on.However,when the particle size decreases to approach the third critical size where the particles turn into the supperparamagnetic state,the coercive force begins to decrease due to the interplay of the size effect and the incomplete ordering induced by the size effect.Meanwhile,due to the size effect,Curie temperature of the ultra-small FePt particles reduces.
文摘For nanophase (Nd, Pr)FeB/α-Fe composite alloys were prepared by melt spinning, the appreciable addition of Zr reduces their average grain size. Observed by atom force microscopy (AFM), the average grain diameter of crystallized ribbons on their free surface, reduces from 175 nm of Zr-free alloy to 79 nm of Zr-1at%, by about 55%. If the concentration exceeds 1%, the effects of Zr on fining grain size are evidently weakened. The average grain size on free surface of Zr-1.5at% is 72 nm. With the addition of 1at% Zn, the bonded magnets has the best combination of properties: B_r=0.675 T, H_(ci)=616 kA·m^(-1), (BH)_(max)=77 kJ·m^(-3). Below 1at%, the coarser grains lead to a lower magnetic property. Beyond 1at%, the layer of Zr-rich intergranular phase will thicken, which results in weakening of the exchange coupling among adjacent grains, and then causes degrading of magnetic properties of magnets.
文摘By using sub-overquenching and annealing method which has a wide processing window, (Nd, Pr), ( Fe-CoZr)(94-x)B-6(x = 12, 10.5, 10, 9) bonded magnets were prepared and the effect of rare earths content on magnetic properties was investigated. Being spun at sub-ove.quenching speed the as-spun ribbons consist of amorphous phases mixed with fine crystallites. After crystallization under optimum annealing conditions and bonded with 3.25% (mass fraction) epoxy, the magnets obtained the optimum magnetic properties. The rare earths content directly determines the magnetic properties. With the reduction of rare earths content, B-r increases but H-ci and (BH)(max) decrease. x = 10 is the critical value for the magnetic proper-ties change. Below this value, Br increases slowly meanwhile H-ci and (BH)(max) decrease strongly because alloy contains extra fractions of soft magnetic phase which are not coupled with the hard magnetic phase.. This experimental result is consistent with the calculated results using the model of volume fraction of soft magnetic phase coupled completely suggested.
基金the National'863'Project of China(Grant No.2002AA324050)the National Natural Science Foundation of China(Grant Nos.9971026)the Nature Science Foundation of Shandong Province(Grant No.Y2000F10)
文摘The effect of exchange-coupling interaction on the effective anisotropy and its varying tendency in nanocrystalline single-phase NdFeB permanent magnetic material have been investigated. The results show that the exchange-coupling interaction between grains makes the effective anisotropy of material, Keff, decrease with the reduction of grain size. The variation of Keff is basically the same as that of coercivity. The decrease in effective anisotropy is the main reason of the reduction of coercivity for nanocrystalline single-phase NdFeB permanent magnetic material. In order to get high anisotropy and coercivity in nanocrystalline single-phase NdFeB permanent material, the grain size should be larger than 35 nm.
