Brittle fracture occurs frequently in rails and thermite welded joints, which intimidates the security and reliability of railway ser- vice. Railways in cold regions, such as Qinghai-Tibet Railway, make the problem of...Brittle fracture occurs frequently in rails and thermite welded joints, which intimidates the security and reliability of railway ser- vice. Railways in cold regions, such as Qinghai-Tibet Railway, make the problem of brittle fi＇acture in rails even worse. A series of tests such as uniaxial tensile tests, Charpy impact tests, and three-point bending tests were carried out at low temperature to investigate the mechanical properties and fracture toughness of U71Mn and U75V rail steels and their thermite welds. Fracture micromechanisms were analyzed by scanning electron microscopy （SEM） on the fracture surfaces of the tested specimens. The ductility indices （percentage elongation aider frac- ture and percentage reduction of area） and the toughness indices （Charpy impact energy Ak and plane-strain fracture toughness Kic） of the two kinds of rail steels and the corresponding thermite welds all decrease as the temperature decreases. The thermite welds are more critical to fracture than the rail steel base metals, as indicated by a higher yield-to-ultimate ratio and a much lower Charpy impact energy. U71Mn rail steel is relatively higher in toughness than U75V, as demonstrated by larger Ak and Klc values. Therefore, U71Mn rail steel and the corresponding thermite weld are recommended in railway construction and maintenance in cold regions.展开更多
Achieving high strength,deformability and toughness in polymers is important for practical industrial applications.This has remained challenging because of the mutually opposing effects of improvements to each of thes...Achieving high strength,deformability and toughness in polymers is important for practical industrial applications.This has remained challenging because of the mutually opposing effects of improvements to each of these properties.Here,a self-assembling nacre-like polymer composite is designed to achieve ex-tremely tough with increasing strength.This special design significantly improved polymer’s mechanical properties,including an ultra-high fracture strain of 1180%,a tensile strength of 55.4 MPa and a toughness of 506.9 MJ/m^(3),which far exceed the highest values previously reported for polymer composites.This ex-cellent combination of properties can be attributed to a novel toughening mechanism,achieved by the synergy of the domain-limiting effect of metallic glass fragments with the strain-gradient-induced orien-tation and crystallisation within the polymer during stretching.Our approach opens a promising avenue for designing robust polymer materials in armour and aerospace engineering for a range of innovative applications.展开更多
Ceramics constitute an integral part of highly efficient armours due to their low density, high hardness, strength and stiffness. However, they lack toughness and multi-hit capability. Therefore, zirconia toughened al...Ceramics constitute an integral part of highly efficient armours due to their low density, high hardness, strength and stiffness. However, they lack toughness and multi-hit capability. Therefore, zirconia toughened alumina is investigated. The hardness is evaluated using Vickers, Knoop and instrumented indentations, while the fracture toughness is evaluated using the indentation technique and Charpy tests. The strength is evaluated using ring-on-ring, four point bend and drop weight tests. The Young’s modulus is evaluated using the unloading instrumented indentation curves. Microstructure, porosity and density are characterised using ultrasonic scanning, Archimedes principle, optical and scanning electron microscopy. Results show an indentation size effect on all mechanical properties. A substantial improvement in toughness is achieved through retardation of crack initiation by tetragonal-to-monoclinic phase transformation in zirconia particles, crack deviation thanks to appropriate grain structure, as well as energy absorption by densification due to remaining porosity. This improved toughness is expected to promote multi-hit capability.展开更多
基金supported by the Research Foundation of the Ministry of Railways and Tsinghua University (No.T200410)the National Natural Science Foundation of China (Nos.50778102 and 51178244)
文摘Brittle fracture occurs frequently in rails and thermite welded joints, which intimidates the security and reliability of railway ser- vice. Railways in cold regions, such as Qinghai-Tibet Railway, make the problem of brittle fi＇acture in rails even worse. A series of tests such as uniaxial tensile tests, Charpy impact tests, and three-point bending tests were carried out at low temperature to investigate the mechanical properties and fracture toughness of U71Mn and U75V rail steels and their thermite welds. Fracture micromechanisms were analyzed by scanning electron microscopy （SEM） on the fracture surfaces of the tested specimens. The ductility indices （percentage elongation aider frac- ture and percentage reduction of area） and the toughness indices （Charpy impact energy Ak and plane-strain fracture toughness Kic） of the two kinds of rail steels and the corresponding thermite welds all decrease as the temperature decreases. The thermite welds are more critical to fracture than the rail steel base metals, as indicated by a higher yield-to-ultimate ratio and a much lower Charpy impact energy. U71Mn rail steel is relatively higher in toughness than U75V, as demonstrated by larger Ak and Klc values. Therefore, U71Mn rail steel and the corresponding thermite weld are recommended in railway construction and maintenance in cold regions.
基金This work was financially supported by the Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone Shen-zhen Park Project(No.HZQB-KCZYB-2020030)the RGC Gen-eral Research Fund(No.AoE/M-402/20,CityU 11209918)+1 种基金the RGC Theme-based Research Scheme(No.T13-402/17-N)the Ma-jor Program of Changsha Science and Technology Project(No.kh2003023).
文摘Achieving high strength,deformability and toughness in polymers is important for practical industrial applications.This has remained challenging because of the mutually opposing effects of improvements to each of these properties.Here,a self-assembling nacre-like polymer composite is designed to achieve ex-tremely tough with increasing strength.This special design significantly improved polymer’s mechanical properties,including an ultra-high fracture strain of 1180%,a tensile strength of 55.4 MPa and a toughness of 506.9 MJ/m^(3),which far exceed the highest values previously reported for polymer composites.This ex-cellent combination of properties can be attributed to a novel toughening mechanism,achieved by the synergy of the domain-limiting effect of metallic glass fragments with the strain-gradient-induced orien-tation and crystallisation within the polymer during stretching.Our approach opens a promising avenue for designing robust polymer materials in armour and aerospace engineering for a range of innovative applications.
文摘Ceramics constitute an integral part of highly efficient armours due to their low density, high hardness, strength and stiffness. However, they lack toughness and multi-hit capability. Therefore, zirconia toughened alumina is investigated. The hardness is evaluated using Vickers, Knoop and instrumented indentations, while the fracture toughness is evaluated using the indentation technique and Charpy tests. The strength is evaluated using ring-on-ring, four point bend and drop weight tests. The Young’s modulus is evaluated using the unloading instrumented indentation curves. Microstructure, porosity and density are characterised using ultrasonic scanning, Archimedes principle, optical and scanning electron microscopy. Results show an indentation size effect on all mechanical properties. A substantial improvement in toughness is achieved through retardation of crack initiation by tetragonal-to-monoclinic phase transformation in zirconia particles, crack deviation thanks to appropriate grain structure, as well as energy absorption by densification due to remaining porosity. This improved toughness is expected to promote multi-hit capability.
