Self-assembly of perovskite nanocrystals:From driving forces to applications

Self-assembly of metal halide perovskite nanocrystals(NCs)into superlattices can exhibit unique collective properties,which have significant application values in the display,detector,and solar cell field.This review discusses the driving forces behind the self-assembly process of perovskite NCs,and the commonly used self-assembly methods and different self-assembly structures are detailed.Subsequently,we summarize the collective optoelectronic properties and application areas of perovskite superlattice structures.Finally,we conclude with an outlook on the potential issues and future challenges in developing perovskite NCs.

Efficient energy transfer from self-trapped excitons to Mn^(2+) dopants in CsCdCl_(3):Mn^(2+) perovskite nanocrystals

Mn^(2+)doping has been adopted as an efficient approach to regulating the luminescence properties of halide perovskite nano-crystals(NCs).However,it is still difficult to understand the interplay of Mn^(2+)luminescence and the matrix self-trapped exciton(STE)emission therein.In this study,Mn^(2+)-doped CsCdCl_(3) NCs are prepared by hot injection,in which CsCdCl_(3) is selected because of its unique crystal structure suitable for STE emission.The blue emission at 441 nm of undoped CsCdCl_(3) NCs originates from the defect states in the NCs.Mn^(2+)doping promotes lattice distortion of CsCdCl_(3) and generates bright orange-red light emission at 656 nm.The en-ergy transfer from the STEs of CsCdCl_(3) to the excited levels of the Mn^(2+)ion is confirmed to be a significant factor in achieving efficient luminescence in CsCdCl_(3):Mn^(2+)NCs.This work highlights the crucial role of energy transfer from STEs to Mn^(2+)dopants in Mn^(2+)-doped halide NCs and lays the groundwork for modifying the luminescence of other metal halide perovskite NCs.

Nonlinear Absorption and Low-threshold Two-photon Pumped Amplified Stimulated Emission from FAPbBr_(3) Nanocrystals

Formamidinium lead bromide(FAPbBr_(3))nanocrystals(NCs)have been considered to be a good optoelectronic material due to their pure green emission,excellent stability and superior carrier transport characteristics.However,two-photon pumped amplified spontaneous emission(ASE)and the corresponding nonlinear optical properties of FAPbBr_(3) NCs are scarcely revealed.Herein,we synthesized colloidal FAPbBr_(3) NCs with different sizes by changing the molar ratio of FABr/PbBr_(2) in the precursor solution,using ligand assisted precipitation(LARP)technology at room temperature.Photoluminescence(PL)and time resolved photoluminescence(TRPL)spectroscopy were measured to characterize their ASE properties.And their nonlinear optical properties were studied through the Zscan technique and the two-photon excited fluorescence method.The stimulated emission properties including oneand two-photon pumped ASE have been realized from FAPbBr_(3) NCs.With large two-photon absorption coefficient(0.27 cm/GW)and high non-linear absorption cross-section(7.52×10^(5) GM),ASE with threshold as low as 9.8μJ/cm^(2) and 487μJ/cm^(2) have been obtained from colloidal FAPbBr_(3) NCs using one-and two-photon excitations.These results indicate that as a new possible green-emitting frequency-upconversion material with low thresholds,FAPbBr_(3) NCs hold great potential in the development of high-performance two-photon pump lasers.

Isolative Synthesis and Characterization of Cellulose and Cellulose Nanocrystals from Typha angustifolia

The application potential of cellulosic materials in natural composites and other fields needs to be explored to develop innovative, sustainable, lightweight, functional biomass materials that are also environmentally friendly. This study investigated Typha angustifolia (Typha sp.) as a potential new raw material for extracting cellulose nanocrystals (CNCs) for application in wastewater treatment composites. Alkaline treatments and bleaching were used to remove cellulose from the stem fibres. The CNCs were then isolated from the recovered cellulose using acid hydrolysis. The study showed a few distinct functional groups (O-H, -C-H, =C-H and C-O, and C-O-C) in the Fourier Transform Infrared (FTIR) spectra. A scanning electron microscope (SEM) revealed the smooth surface of CPC and CNCs, which resulted from removing lignin and hemicellulose from powdered Typha angustifolia. Based on the crystalline index, the powdered Typha angustifolia, CPC, and CNCs were 42.86%, 66.94% and 77.41%. The loss of the amorphous section of the Typha sp. fibre resulted in a decrease in particle size. It may be inferred from the features of a Typha sp. CNC that CNCs may be employed as reinforcement in composites for wastewater treatment.

Strengthening-softening transition and maximum strength in Schwarz nanocrystals

Recently,a Schwarz crystal structure with curved grain boundaries(GBs)constrained by twin-boundary(TB)networks was discovered in nanocrystalline Cu through experiments and atomistic simulations.Nanocrystalline Cu with nanosized Schwarz crystals exhibited high strength and excellent thermal stability.However,the grainsize effect and associated deformation mechanisms of Schwarz nanocrystals remain unknown.Here,we performed large-scale atomistic simulations to investigate the deformation behaviors and grain-size effect of nanocrystalline Cu with Schwarz crystals.Our simulations showed that similar to regular nanocrystals,Schwarz nanocrystals exhibit a strengthening-softening transition with decreasing grain size.The critical grain size in Schwarz nanocrystals is smaller than that in regular nanocrystals,leading to a maximum strength higher than that of regular nanocrystals.Our simulations revealed that the softening in Schwarz nanocrystals mainly originates from TB migration(or detwinning)and annihilation of GBs,rather than GB-mediated processes(including GB migration,sliding and diffusion)dominating the softening in regular nanocrystals.Quantitative analyses of simulation data further showed that compared with those in regular nanocrystals,the GB-mediated processes in Schwarz nanocrystals are suppressed,which is related to the low volume fraction of amorphous-like GBs and constraints of TB networks.The smaller critical grain size arises from the suppression of GB-mediated processes.

Energy-Transfer in CsPbBr_(3)Nanocrystals:Sensitization of Porphyrin Triplets

Sensitizing molecular triplets by colloidal nanocrystals via triplet energy transfer is important for applications such as upconversion or organic synthesis.Typically two step triplet energy transfer(TET)are included in these applications:firstly the triplet energy stored in nanocrystals are extracted into surface ligands,and then the ligands further transfer triplet energy into molecules in bulk solution.Here we report one-step TET application from CsPbBr_(3)perovskite nanocrystals(NCs)to surface-anchored metalloporphyrin derivative molecules(MP).Compared to conventional two-step TET,the one-step TET mechanism possess lower energy loss and higher TET efficiency which is more generally implementable.In this scheme,photoexcitation of CsPbBr_(3)NCs leads to the sensitization of MP ligands triplets which efficiently emit phosphorescence.The enhanced light absorption of MP ligands and down-shifted photon emission can be useful in devices such as luminescent solar concentrators.

Growth Kinetics of Nanocrystals and Nanorods by Employing Small-angle X-ray Scattering (SAXS) and Other Techniques

In this article, we report the results of our detailed investigations of the growth kinetics of zero-dimensional nanocrystals as well as one-dimensional nanorods by the combined use of small angel X-ray scattering （SAXS）, transmission electron microscopy （TEM） along with other physical techniques. The study includes growth kinetics of gold nanocrystals formed by the reduction of HAuCl4 by tetrakis（hydroxymethyl） phosphonium chloride in aqueous solution, of CdSe nanocrystals formed by the reaction of cadmium stearate and selenium under solvothermal conditions, and of ZnO nanorods formed by the reaction of zinc acetate with sodium hydroxide under solvothermal conditions in the absence and presence of capping agents. The growth of gold nanocrystals does not follow the diffusion-limited Ostwald ripening, and instead follows a Sigmoidal rate curve. The heat change associated with the growth determined by isothermal titration calorimetry is about 10 kcal·mol^-1 per I nm increase in the diameter of the nanocrystals. In the case of CdSe nanocrystals also, the growth mechanism deviates from diffusion-limited growth and follows a combined model containing both diffusion and surface reaction terms. Our study of the growth kinetics of uncapped and poly（vinyl pyrollidone） （PVP）-capped ZnO nanorods has yielded interesting insights. We observe small nanocrystals next to the ZnO nanorods after a lapse of time in addition to periodic focusing and defocusing of the width of the length distribution. These observations lend support to the diffusion-limited growth model for the growth of uncapped ZnO nanorods. Accordingly, the time dependence on the length of uncapped nanorods follows the L3 law as required for diffusion-limited Ostwald ripening. The PVP-capped nanorods, however, show a time dependence, which is best described by a combination of diffusion （L^3） and surface reaction （L^2） terms.

Facile synthesis of tin oxide nanocrystals and their photocatalytic activity

Tin oxide nanociystals with diameters smaller than 10 nm were synthesized using Na2SnO3 and CO2 as reactants and cetyltrimethylammonium bromide（CTAB） as stabilizer under mild conditions.As a mild acidic gas,CO2 is favorable for the accurate adjustment of pH value of Na2SnO3 solution.Stannate salt is stable,cheap and easy in operation.The effects of Na2SnO3concentration,CTAB concentration,aging temperature,and aging time on the nanociystals were studied.It was found that,with the increasing Na2SnO3 concentration,aging temperature and aging time,SnO2 nanociystals size decreases.The formation of SnO2nanociystals can be interpreted by electrostatic-interaction mechanism.SnO2 nanociystals show high photocatalytic activities in the degradation of Rhodamine B solution.The catalytic activity of small nanocrystals is higher than that of large ones.

Synthesis and upconversion luminescence of Lu_2O_3:Yb^(3+),Tm^(3+) nanocrystals

Lutetium oxide nanocrystals codoped with Tm3＋ and Yb3＋ were synthesized by the reverse-like co-precipitation method, using ammonium hydrogen carbonate as precipitant. Effects of the Tm3＋, Yb3＋ molar fractions and calcination temperature on the structural and upconversion luminescent properties of the Lu2O3 nanocrystals were investigated. The XRD results show that all the prepared nanocrystals can be readily indexed to pure cubic phase of Lu2O3 and indicate good crystallinity. The experimental results show that concentration quenching occurs when the mole fraction of Tm3＋ is above 0.2%. The optimal Tm3＋ and Yb3＋ doped molar fractions are 0.2% and 2%, respectively. The strong blue （490 nm） and the weak red （653 nm） emissions from the prepared nanocrystals were observed under 980 nm laser excitation, and attributed to the 1G4→3H6 and IG4→3F4 transitions of Tm3＋, respectively. Power-dependent study reveals that the 1G4 levels of Tm3＋ can be populated by three-step energy transfer process. The upconversion emission intensities of 490 nm and 653 nm increase gradually with the increase of calcination temperature. The enhancement of the upconversion luminescence is suggested to be the consequence of reducing number of OH- groups and the enlarged nanoerystal size.

Nanocrystals for enhancement of oral bioavailability of poorly water-soluble drugs

Nanocrystals,a carrier-free colloidal delivery system in nano-sized range,is an interesting approach for poorly soluble drugs.Nanocrystals provide special features including enhancement of saturation solubility,dissolution velocity and adhesiveness to surface/cell membranes.Several strategies are applied for nanocrystals production including precipitation,milling,high pressure homogenization and combination methods such as Nano-Edge^(TM),SmartCrystal and Precipitation-lyophilization-homogenization(PLH)technology.For oral administration,many publications reported useful advantages of nanocrystals to improve in vivo performances i.e.pharmacokinetics,pharmacodynamics,safety and targeted delivery which were discussed in this review.Additionally,transformation of nanocrystals to final formulations and future trends of nanocrystals were also described.

Intranasal delivery of paeoniflorin nanocrystals for brain targeting

Paeoniflorin(PA) is an anti-Parkinson Chinese medicine with inferior bioavailability and difficulty in delivery to the brain. This research is to develop an efficacious PA nanocrystal formulation(PA-NCs) that is suitable for intranasal administration to treat Parkinson’s disease(PD). PA-NCs were fabricated through an antisolvent precipitation method using TPGS as the stabilizer. The rod-shaped PA-NCs had particle size of 139.6 ± 1.3 nm and zeta potential of-23.2 ± 0.529 mV. A molecular dynamics simulation indicated that van der Waals forces are the primary drivers of interactions between PA and TPGS. In the ex vivo nasal mucosa permeation assay, the cumulative drug release at 24 h was 87.14% ± 5.34%,which was significantly higher than that of free PA. PA-NCs exhibited substantially improved cellular uptake as well as permeability on Calu-3 cells as compared to PA alone. FRET imaging analysis demonstrated that intact NCs could be internalized into Calu-3 cells.Moreover, PA-NCs conferred desirable protective effect against MPP+-induced SH-SY5Y cellular damage. Pharmacokinetic studies revealed a higher PA concentration in the brain following intranasal delivery of PA-NCs. In summary, the intranasal administration of PANCs is a promising treatment strategy for PD.

Hierarchically skeletal multi-layered Pt-Ni nanocrystals for highly efficient oxygen reduction and methanol oxidation reactions

Pt based materials are the most efficient electrocatalysts for the oxygen reduction reaction(ORR)and methanol oxidation reaction(MOR)in fuel cells.Maximizing the utilization of Pt based materials by modulating their morphologies to expose more active sites is a fundamental objective for the practical application of fuel cells.Herein,we report a new class of hierarchically skeletal Pt-Ni nanocrystals(HSNs)with a multi-layered structure,prepared by an inorganic acid-induced solvothermal method.The addition of H_(2)SO_(4)to the synthetic protocol provides a critical trigger for the successful growth of Pt-Ni nanocrystals with the desired structure.The Pt-Ni HSNs synthesized by this method exhibit enhanced mass activity of 1.25 A mgpt−1 at 0.9 V(versus the reversible hydrogen electrode)towards ORR in 0.1-M HClO_(4),which is superior to that of Pt-Ni multi-branched nanocrystals obtained by the same method in the absence of inorganic acid;it is additionally 8.9-fold higher than that of the commercial Pt/C catalyst.Meanwhile,it displays enhanced stability,with only 21.6%mass activity loss after 10,000 cycles(0.6–1.0 V)for ORR.Furthermore,the Pt-Ni HSNs show enhanced activity and anti-toxic ability in CO for MOR.The superb activity of the Pt-Ni HSNs for ORR and MOR is fully attributed to an extensively exposed electrochemical surface area and high intrinsic activity,induced by strain effects,provided by the unique hierarchically skeletal alloy structure.The novel open and hierarchical structure of Pt-Ni alloy provides a promising approach for significant improvements of the activity of Pt based alloy electrocatalysts.

Nitrogen‐doped graphene aerogel‐supported ruthenium nanocrystals for pH‐universal hydrogen evolution reaction

The design and synthesis of high‐performance and low‐cost electrocatalysts for the hydrogen evolution reaction(HER),a key half‐reaction in water electrolysis,are essential.Owing to their modest hydrogen adsorption energy,ruthenium(Ru)‐based nanomaterials are considered outstanding candidates to replace the expensive platinum(Pt)‐based HER electrocatalysts.In this study,we developed an adsorption‐pyrolysis method to construct nitrogen(N)‐doped graphene aerogel(N‐GA)‐supported ultrafine Ru nanocrystal(Ru‐NC)nanocomposites(Ru‐NCs/N‐GA).The particle size of the Ru‐NCs and the conductivity of the N‐GA substrate can be controlled by varying the pyrolysis temperature.Optimal experiments reveal revealed that 10 wt%Ru‐NCs/N‐GA nanocomposites require overpotentials of only 52 and 36 mV to achieve a current density of 10 mA cm^(−2) in 1 mol/L HClO4 and 1 mol/L KOH electrolytes for HER,respectively,which is comparable to 20 wt%Pt/C electrocatalyst.Benefiting from the ultrafine size and uniform dispersion of the Ru‐NCs,the synergy between Ru and the highly conductive substrate,and the anchoring effect of the N atom,the Ru‐NCs/N‐GA nanocomposites exhibit excellent activity and durability in the pH‐universal HER,thereby opening a new avenue for the production of commercial HER electrocatalysts.

Recent Progress on Spectroscopy of Lanthanide Ions Incorporated in Semiconductor Nanocrystals

Doping luminescent lanthanide ions into semiconductor nanocrystals is an ideal approach for developing nanodevices for various applications. Quantum confinement effects are expected for lanthanide ions doped in small semiconductor nanocrystals. The most recent progress on the synthesis and spectroscopy of lanthanide ions in various semiconductor nanocrystals such as Ⅱ -Ⅵ, Ⅲ-Ⅴ and Ⅳ-Ⅵ families were systematically reviewed, focusing on our recent findings on the optical spectroscopy of Eu^3 ＋ doped in ZnO and TiO2 nanocrystals by wet chemical synthesis. The energy transfer from the band-gap excitation to lanthanides further confirmed that lanthanide ions could be successfully incorporated into the lattice sites in spite of the mismatch in ionic radii.

Sol-gel preparation and characterization of Co_3O_4 nanocrystals

A new citrate acid-hydrazine sol-gel route for preparation of Co3O4 nanoparticles has been developed. Co3O4 nanoparticles with different particle-sizes and morphology were prepared at different heat-treatment temperatures and the pure cubic nanocrystals of Co3O4 were obtained at 600℃. The synthesis process was monitored by infrared spectroscopy (IR), thermal gravimetric and differential thermal analysis (TG-DTA). The structure and morphology of Co3O4 nanocrystals were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and X-ray-photoelectron spectroscopy (XPS). The infrared absorption bands blue-shifted with particle size decreasing, which could be attributed to increasing surface effect. XPS results showed that predominant species at surface layers of Co3O4 nanocrystals are octahedral Co (Ⅲ).

Enhanced transdermal delivery of meloxicam by nanocrystals: Preparation, in vitro and in vivo evaluation

Meloxicam(MLX) is efficient in relieving pain and inflammatory symptoms, which, however, is limited by the poor solubility and gastrointestinal side effects. The objective of this study is to develop a nanocrystal formulation to enhance transdermal delivery of MLX. MLX nanocrystals were successfully prepared by the nanoprecipitation technique based on acidbase neutralization. With poloxamer 407 and Tween 80(80/20, w/w) as mixed stabilizers,MLX nanocrystals with particle size of 175 nm were obtained. The crystalline structure of MLX nanocrystals was confirmed by both differential scanning calorimetry and X-ray powder diffractometry. However, the nanoprecipitation process reduced the crystallinity of MLX.Nanocrystals increased both in vitro and in vivo transdermal permeation of MLX compared with the solution and suspension counterparts. Due to the enhanced apparent solubility and dissolution as well as the facilitated hair follicular penetration, nanocrystals present a high and prolonged plasma MLX concentration. And 2.58-and 4.4-fold increase in AUC0 →2 4 h was achieved by nanocrystals comparing with solution and suspension, respectively. In conclusion, nanocrystal is advantageous for transdermal delivery of MLX.

Luminescence properties of ZnS:Cu, Eu semiconductor nanocrystals synthesized by a hydrothermal process

ZnS：Cu, Eu nanocrystals with an average diameter of 80 nm are synthesized using a hydrothermal approach at 200 ℃. The photoluminescence （PL） properties of the ZnS：Cu, Eu nanocrystals before and after annealing, as well as the doping form of Eu, are studied. The as-synthesized samples are characterized by X-ray diffraction, scanning electron microscopy, inductively coupled plasma-atomic emission spectrometry, and the excitation and emission spectra （PL）. The results show that both Cu and Eu are indeed incorporated into the ZnS matrix. Compared with the PL spectrum of the Cu mono-doped sample, the PL emission intensity of the Cu and Eu-codoped sample increases and a peak appears at 516 nm, indicating that Eu3＋ ions, which act as an impurity compensator and activator, are incorporated into the ZnS matrix, forming a donor level. Compared with the unannealed sample, the annealed one has an increased PL emission intensity and the peak position has a blue shift of 56 nm from 516 nm to 460 nm, which means that Eu3＋ ions reduce to Eu2＋ ions, thereby leading to the appearance of Eu2＋ characteristic emission and generating effective host-to-Eu2＋ energy transfer. The results indicate the potential applications of ZnS：Cu, Eu nanoparticles in optoelectronic devices.

Shape-Controlled Synthesis of Platinum-Based Nanocrystals and Their Electrocatalytic Applications in Fuel Cells

To achieve environmentally benign energy conversion with the carbon neutrality target via electrochemical reactions, the innovation of electrocatalysts plays a vital role in the enablement of renewable resources. Nowadays, Pt-based nanocrystals(NCs) have been identified as one class of the most promising candidates to efficiently catalyze both the half-reactions in hydrogen-and hydrocarbonbased fuel cells. Here, we thoroughly discuss the key achievement in developing shape-controlled Pt and Pt-based NCs, and their electrochemical applications in fuel cells. We begin with a mechanistic discussion on how the morphology can be precisely controlled in a colloidal system, followed by highlighting the advanced development of shape-controlled Pt, Pt-alloy, Pt-based core@shell NCs, Pt-based nanocages, and Pt-based intermetallic compounds. We then select some case studies on models of typical reactions(oxygen reduction reaction at the cathode and small molecular oxidation reaction at the anode) that are enhanced by the shape-controlled Pt-based nanocatalysts. Finally, we provide an outlook on the potential challenges of shape-controlled nanocatalysts and envision their perspective with suggestions.

Solution-Phase Synthesis and Characterization of Perovskite LaCoO_3 Nanocrystals via A Co-Precipitation Route

A facile co-precipitation route for the synthesis of well-dispersed LaCoO3 nanocrystals was developed. The asprepared products were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, energy dispersive X-ray spectrometer （EDX）, and laser Raman spectroscopy （LRS）. The resuks showed that modulating the growth parameters, such as the addition of surfactants as well as the adding manner of the precipitator had a significant effect on the overall shape and size of the obtained nanocrystals. The nanorods with the diameter of 20 nm and spherical LaCoO3 nanocrystals with the size of about 25 nm could be obtained at a relatively low calcining temperature of 600℃. Furthermore, the Raman properties of LaCoO3 products obtained at different calcining temperatures were investigated.

Naringenin nanocrystals for improving antirheumatoid arthritis activity

Naringenin(NAR)is recognized for its anti-inflammatory activity.However,the clinical application of NAR is limited by low bioavailability,which is attributed to its poor aqueous solubility.In this study,we aimed to improve the therapeutic efficacy of NAR by formulating it into nanocrystals(NCs)via wet milling.The obtained NARNCs exhibited superior dissolution behaviors,increased cellular uptake,and enhanced transcellular diffusion relative to those of bulk NAR.Oral administration of NARNCs also significantly improved bioavailability in rats.In addition,the NARNCs effectively improved rheumatoid arthritis treatment in collagen-induced arthritic rats by reducing inflammatory cell infiltration and synovial damage.These results indicate that NARNCs provides a promising strategy for rheumatoid arthritis treatment.