Sustained release of vascular endothelial growth factor A and basic fibroblast growth factor from nanofiber membranes reduces oxygen/glucose deprivation-induced injury to neurovascular units

Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell proliferation and differentiation,thereby exerting neuroprotective effects.However,the beneficial effects of endogenous VEGFA/b FGF are limited as their expression is only transiently increased.In this study,we generated multilayered nanofiber membranes loaded with VEGFA/b FGF using layer-by-layer self-assembly and electrospinning techniques.We found that a membrane containing 10 layers had an ideal ultrastructure and could efficiently and stably release growth factors for more than 1 month.This 10-layered nanofiber membrane promoted brain microvascular endothelial cell tube formation and proliferation,inhibited neuronal apoptosis,upregulated the expression of tight junction proteins,and improved the viability of various cellular components of neurovascular units under conditions of oxygen/glucose deprivation.Furthermore,this nanofiber membrane decreased the expression of Janus kinase-2/signal transducer and activator of transcription-3(JAK2/STAT3),Bax/Bcl-2,and cleaved caspase-3.Therefore,this nanofiber membrane exhibits a neuroprotective effect on oxygen/glucose-deprived neurovascular units by inhibiting the JAK2/STAT3 pathway.

Engineering the spectra of photon triplets generated from micro/nanofiber

Quantum light sources are the core resources for photonics-based quantum information processing.We investigate the spectral engineering of photon triplets generated by third-order spontaneous parametric down-conversion in micro/nanofiber.The phase mismatching at one-third pump frequency gives rise to non-degenerate photon triplets,the joint spectral intensity of which has an elliptical locus with a fixed eccentricity of√6/3.Therefore,we propose a frequency-division scheme to separate non-degenerate photon triplets into three channels with high heralding efficiency for the first time.Choosing an appropriate pump wavelength can compensate for the fabrication errors of micro/nanofiber and also generate narrowband,non-degenerate photon triplet sources with a high signal-to-noise ratio.Furthermore,the long-period micro/nanofiber grating introduces a new controllable degree of freedom to tailor phase matching,resulting from the periodic oscillation of dispersion.In this scheme,the wavelength of photon triplets can be flexibly tuned using quasi-phase matching.We study the generation of photon triplets from this novel perspective of spectrum engineering,and we believe that this work will accelerate the practical implementation of photon triplets in quantum information processing.

Bifunctional TiO_(2-x)nanofibers enhanced gel polymer electrolyte for high performance lithium metal batteries

Exploration of advanced gel polymer electrolytes(GPEs)represents a viable strategy for mitigating dendritic lithium(Li)growth,which is crucial in ensuring the safe operation of high energy density Li metal batteries(LMBs).Despite this,the application of GPEs is still hindered by inadequate ionic conductivity,low Li^(+)transference number,and subpar physicochemical properties.Herein,Ti O_(2-x)nanofibers(NF)with oxygen vacancy defects were synthesized by a one-step process as inorganic fillers to enhance the thermal/mechanical/ionic-transportation performances of composite GPEs.Various characterizations and theoretical calculations reveal that the oxygen vacancies on the surface of Ti O_(2-x)NF accelerate the dissociation of Li PF_6,promote the rapid transfer of free Li^(+),and influence the formation of Li F-enriched solid electrolyte interphase.Consequently,the composite GPEs demonstrate enhanced ionic conductivity(1.90m S cm^(-1)at room temperature),higher lithium-ion transference number(0.70),wider electrochemical stability window(5.50 V),superior mechanical strength,excellent thermal stability(210℃),and improved compatibility with lithium,resulting in superior cycling stability and rate performance in both Li||Li,Li||Li Fe PO_(4),and Li||Li Ni_(0.8)Co_(0.1)Mn_(0.1)O_(2)cells.Overall,the synergistic influence of nanofiber morphology and enriched oxygen vacancy structure of fillers on electrochemical properties of composite GPEs is comprehensively investigated,thus,it is anticipated to shed new light on designing high-performance GPEs LMBs.

Integrated adsorption and photocatalytic removal of methylene blue dye from aqueous solution by hierarchical Nb_(2)O_(5)@PAN/PVDF/ANO composite nanofibers

This work presents the development of hierarchical niobium pentoxide(Nb_(2)O_(5))-based composite nanofiber membranes for integrated adsorption and photocatalytic degradation of methylene blue(MB)pollutants from aqueous solutions.The Nb_(2)O_(5) nanorods were vertically grown using a hydrothermal process on a base electrospun nanofibrous membrane made of polyacrylonitrile/polyvinylidene fluoride/ammonium niobate(V)oxalate hydrate(Nb_(2)O_(5)@PAN/PVDF/ANO).They were characterized using field-emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD)analysis,and Fourier transform infrared(FTIR)spectroscopy.These composite nanofibers possessed a narrow optical bandgap energy of 3.31 eV and demonstrated an MB degradation efficiency of 96%after 480 min contact time.The pseudo-first-order kinetic study was also conducted,in which Nb_(2)O_(5)@PAN/PVDF/ANO nanofibers have kinetic constant values of 1.29×10^(-2) min^(-1) and 0.30×10^(-2) min^(-1) for adsorption and photocatalytic degradation of MB aqueous solutions,respectively.These values are 17.7 and 7.8 times greater than those of PAN/PVDF/ANO nanofibers without Nb_(2)O_(5) nanostructures.Besides their outstanding photocatalytic performance,the developed membrane materials exhibit advantageous characteristics in recycling,which subsequently widen their practical use in environmental remediation applications.

Novel Perovskite Oxide Hybrid Nanofibers Embedded with Nanocatalysts for Highly Efficient and Durable Electrodes in Direct CO_(2) Electrolysis

The unique characteristics of nanofibers in rational electrode design enable effec-tive utilization and maximizing material properties for achieving highly efficient and sustainable CO_(2) reduction reactions( CO_(2)RRs)in solid oxide elec-trolysis cells(SOECs).However,practical appli-cation of nanofiber-based electrodes faces chal-lenges in establishing sufficient interfacial contact and adhesion with the dense electrolyte.To tackle this challenge,a novel hybrid nanofiber electrode,La_(0.6)Sr_(0.4)Co_(0.15)Fe_(0.8)Pd_(0.05)O_(3-δ)(H-LSCFP),is developed by strategically incorporating low aspect ratio crushed LSCFP nanofibers into the excess porous interspace of a high aspect ratio LSCFP nanofiber framework synthesized via electrospinning technique.After consecutive treatment in 100% H_(2) and CO_(2) at 700°C,LSCFP nanofibers form a perovskite phase with in situ exsolved Co metal nanocatalysts and a high concentration of oxygen species on the surface,enhancing CO_(2) adsorption.The SOEC with the H-LSCFP electrode yielded an outstanding current density of 2.2 A cm^(-2) in CO_(2) at 800°C and 1.5 V,setting a new benchmark among reported nanofiber-based electrodes.Digital twinning of the H-LSCFP reveals improved contact adhesion and increased reaction sites for CO_(2)RR.The present work demonstrates a highly catalytically active and robust nanofiber-based fuel electrode with a hybrid structure,paving the way for further advancements and nanofiber applications in CO_(2)-SOECs.

Multicomponent Nanoparticles Synergistic One-Dimensional Nanofibers as Heterostructure Absorbers for Tunable and Efficient Microwave Absorption

Application of novel radio technologies and equip-ment inevitably leads to electromagnetic pollution.One-dimensional polymer-based composite membrane structures have been shown to be an effective strategy to obtain high-performance microwave absorbers.Herein,we reported a one-dimensional N-doped carbon nanofibers material which encapsulated the hollow Co_(3)SnC_(0.7) nano-cubes in the fiber lumen by electrospinning.Space charge stacking formed between nanoparticles can be channeled by longitudinal fibrous structures.The dielectric constant of the fibers is highly related to the carbonization temperature,and the great impedance matching can be achieved by synergetic effect between Co_(3)SnC_(0.7) and carbon network.At 800℃,the necklace-like Co_(3)SnC_(0.7)/CNF with 5%low load achieves an excellent RL value of−51.2 dB at 2.3 mm and the effective absorption bandwidth of 7.44 GHz with matching thickness of 2.5 mm.The multiple electromagnetic wave(EMW)reflections and interfacial polarization between the fibers and the fibers internal contribute a major effect to attenuating the EMW.These strategies for regulating electromagnetic performance can be expanded to other electromagnetic functional materials which facilitate the development of emerging absorbers.

Highly Ordered Thermoplastic Polyurethane/Aramid Nanofiber Conductive Foams Modulated by Kevlar Polyanion for Piezoresistive Sensing and Electromagnetic Interference Shielding

Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevlar polyanionic chains, thermoplastic polyurethane(TPU) foams reinforced by aramid nanofibers(ANF) with adjustable pore-size distribution were successfully obtained via a nonsolvent-induced phase separation. In this regard, the most outstanding result is the in situ formation of ANF in TPU foams after protonation of Kevlar polyanion during the NIPS process. Furthermore, in situ growth of copper nanoparticles(Cu NPs) on TPU/ANF foams was performed according to the electroless deposition by using the tiny amount of pre-blended Ti_(3)C_(2)T_(x) MXene as reducing agents. Particularly, the existence of Cu NPs layers significantly promoted the storage modulus in 2,932% increments, and the well-designed TPU/ANF/Ti_(3)C_(2)T_(x) MXene(PAM-Cu) composite foams showed distinguished compressive cycle stability. Taking virtues of the highly ordered and elastic porous architectures, the PAM-Cu foams were utilized as piezoresistive sensor exhibiting board compressive interval of 0–344.5 kPa(50% strain) with good sensitivity at 0.46 kPa^(-1). Meanwhile,the PAM-Cu foams displayed remarkable EMI shielding effectiveness at 79.09 dB in X band. This work provides an ideal strategy to fabricate highly ordered TPU foams with outstanding elastic recovery and excellent EMI shielding performance, which can be used as a promising candidate in integration of satisfactory piezoresistive sensor and EMI shielding applications for human–machine interfaces.

Integration of Desulfurization and Lithium-Sulfur Batteries Enabled by Amino-Functionalized Porous Carbon Nanofibers

Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this issue with a double benefit.Herein,the amino-functionalized lotus root-like carbon nanofibers(NH_(2)-PLCNFs)are prepared by the amination of electrospinning carbon nanofibers under dielectric barrier discharge plasma.Selective catalytic oxidation of H_(2)S to elemental sulfur(S)is achieved over the metalfree NH_(2)-PLCNFs catalyst,and the obtained composite S@NH_(2)-PLCNFs is further used as cathode in LSBs.NH_(2)-PLCNFs enable efficient desulfurization(removal capacity as high as 3.46 g H_(2)S g^(−1) catalyst)and strongly covalent stabilization of S on modified carbon nanofibers.LSBs equipped with S@NH_(2)-PLCNFs deliver a high specific capacity of 705.8 mA h g^(−1) at 1 C after 1000 cycles based on the spatial confinement and the covalent stabilization of electroactive materials on amino-functionalized porous carbon matrix.It is revealed that S@NH_(2)-PLCNFs obtained by this kind of chemical vapor deposition leads to a more homogeneous S distribution and superior electrochemical performance to the sample S/NH_(2)-PLCNF-M prepared by the traditional molten infusion.This work opens a new avenue for the combination of environment protection and energy storage.

Pea-like MoS_(2)@NiS_(1.03)-carbon heterostructured hollow nanofibers for high-performance sodium storage

The rational synergy of chemical composition and spatial nanostructures of electrode materials play important roles in high-performance energy storage devices.Here,we designed pea-like MoS_(2)@NiS_(1.03)-carbon hollow nanofibers using a simple electrospinning and thermal treatment method.The hierarchical hollow nanofiber is composed of a nitrogen-doped carbon-coated NiS_(1.03) tube wall,in which pea-like uniformly discrete MoS_(2) nanoparticles are enclosed.As a sodium-ion battery electrode material,the MoS_(2)@NiS_(1.03)-carbon hollow nanofibers have abundant diphasic heterointerfaces,a conductive network,and appropriate volume variation-buffering spaces,which can facilitate ion diffusion kinetics,shorten the diffusion path of electrons/ion,and buffer volume expansion during Na^(+)insertion/extraction.It shows outstanding rate capacity and long-cycle performance in a sodium-ion battery.This heterogeneous hollow nanoarchitectures designing enlightens an efficacious strategy to boost the capacity and long-life stability of sodium storage performance of electrode materials.

Atmosphere-free activation methodology for holey graphene/cellulose nanofiber-based film electrode with highly efficient capacitance performance

An efficient chamber-induced activation method was applied for the preparation of holey graphene/cellulose nanofiber-based film with high specific surface area(SSA)and multiple channels through the graphene nanosheets.With the cellulose nanofiber(CNF)simultaneously serving as“dispersing agent,”“spacer,”and“activating agent,”the graphene oxide(GO)nanosheets are perforated by the pyrolysis gas from CNF in the confined space inside the hybrid films,uniformly dispersed,and sandwiched between CNF networks with less agglomeration and restacking.Additionally,we have proved that H2O and H2 are primarily responsible for the activation and etching of GO/CNF film.As the CNF content increases,the mesoporosity of the activated reduced GO/CNF(A-RGO/CNF)film increases,and the graphene nanosheets show more nanopore perforations.Benefitting from the high SSA,high density,moderate mesoporosity,and abundant channels for ion diffusion through the graphene nanosheets,the A-RGO/CNF film exhibits the highest specific capacitance of 323(236)F g^(−1)(F cm^(−3))at 1Ag^(−1).For the A-RGO5/CNF5 film containing half CNF and half GO,an excellent comprehensive electrochemical performance including superior rate performance(208(160)F g^(−1)(F cm^(−3))at 60Ag^(−1))is exhibited.Moreover,the A-RGO5/CNF5 electrode in an all-solid-state flexible symmetric supercapacitor delivers a high specific capacitance of 250(193)F g^(−1)(F cm^(−3))at 1Ag^(−1).This study provides a novel idea for the preparation of holey graphene-based film for supercapacitor electrodes.The strategy of simultaneously employing CNF as“dispersing agent,”“spacer,”and“activating agent”also offers a new vision for the assembly of homogeneous nanohybrid material and the utilization of pyrolysis gas.

Suppression of Self-Discharge in Aqueous Supercapacitor Devices Incorporating Highly Polar Nanofiber Separators

One of the major problems limiting the applications of electric double-layer(EDLC)supercapacitor devices is their inability to maintain their cell voltage over a significant period.Self-discharge is a spontaneous decay in charged energy,often resulting in fully depleted devices in a matter of hours.Here,a new method for suppressing this self-discharge phenomenon is proposed by using directionally polarized piezoelectric electrospun nanofiber films as separator materials.Tailored engineering of polyvinylidene fluoride(PVDF)nanofiber films containing a small concentration of sodium dodecyl sulfate(SDS)results in a high proportion of polarβphases,reaching 380.5%of the total material.Inducing polarity into the separator material provides a reverse-diode mechanism in the device,such that it drops from an initial voltage of 1.6 down to 1 V after 10 h,as opposed to 0.3 V with a nonpolarized,commercial separator material.Thus,the energy retained for the polarized separator is 37%and 4%for the nonpolarized separator,making supercapacitors a more attractive solution for long-term energy storage.

Recent advances in nanofiber-based flexible transparent electrodes

Flexible and stretchable transparent electrodes are widely used in smart display,energy,wearable devices and other fields.Due to the limitations of flexibility and stretchability of indium tin oxide electrodes,alternative electrodes have appeared,such as metal films,metal nanowires,and conductive meshes.However,few of the above electrodes can simultaneously have excellent flexibility,stretchability,and optoelectronic properties.Nanofiber(NF),a continuous ultra-long one-dimensional conductive material,is considered to be one of the ideal materials for high-performance transparent electrodes with excellent properties due to its unique structure.This paper summarizes the important research progress of NF flexible transparent electrodes(FTEs)in recent years from the aspects of NF electrode materials,preparation technology and application.First,the unique advantages and limitations of various NF materials are systematically discussed.Then,we summarize the preparation technology of various advanced NF FTEs,and point out the future development trend.We also discuss the application of NFs in solar cells,supercapacitors,electric heating equipments,sensors,etc,and analyze its development potential in flexible electronic equipment,as well as problems that need to be solved.Finally,the challenges and future development trends are proposed in the wide application of NF FTEs in the field of flexible optoelectronics.

Ni_(3)Fe/Ni_(4)S_(3)/Ni/C Mixed Crystal Composite Nanofibers Prepared by Electrospinning and Heat Treatment Methods for Oxygen Evolution Reaction

OER catalyst of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C(NiFeSC series)mixed crystal composite nanofibers was prepared by electrospinning and atmospheric heat treatment process.The testing results indicate that the diameters of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C composite nanofibers is about 200 nm,the grains size is about 1-3 nm,and the fiber surface is rough.The electrochemical test results show that the heterojunction of the prepared Ni_(3)Fe/Ni_(4)S_(3)/Ni/C hybrid crystal composite nanofiber has synergistic effect with sulfide,and exhibits good electrocatalytic activity of water decomposition and OER in alkaline system.The OER electrocatalytic performance of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C composite electrode prepared via a heat treatment at 1000℃process was tested in 1 mol/L KOH electrolytes.The results show that the overpotential is about 298 mV,the Tafel slope is about 74 mV?dec-1,and the surface resistance is about 1.69Ω·cm^(2),at the current density of 10 mA·cm^(-2).

Bacterial Cellulose Nanofibers as Reinforcement for Preparation of Bamboo Pulp Based Composite Paper

Bamboo fibers(BFs),with features of renewability and biodegradability,have been widely used in paper-making products.In order to improve the mechanical properties and water absorption behaviors of the BF paper,bacterial cellulose nanofibers(BCNFs)as environmentally friendly nano-fibrillated cellulose(NFC)were combined with BFs.The structures and properties of the BF/BCNF composite paper were characterized by field emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD),Fourier transforms infrared(FTIR)spectroscopy,mechanical tests,pore size tests,and water absorption tests.The results indicated that the addition of BCNFs could significantly improve the water absorption capacity and mechanical properties.The water absorption ratio of the BF/BCNF composite paper with a BCNF mass fraction of 9%comes to 443%,about 1.33 times that of the pure BF paper.At the same BCNF content,the tensile strength of the BF/BCNF composite paper in dry and wet states was 12.37 MPa and 200.9 kPa,respectively,increasing by 98.24%and 136.91%as compared with that of the BF paper.

Electrospinning organic solvent resistant preoxidized poly(acrylonitrile)nanofiber membrane and its properties

A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane.The performance of resultant O-PAN nanofiber membrane was optimized by altering the PAN concentration and preoxidation temperature.The results showed that the O-PAN nanofiber membrane which made from PAN concentration of 14%(mass)and preoxidation temperature of 250.0
℃ have a more optimal comprehensive performance.In the long-term separation test of SiO2 particle(1 μm)in DMAc suspension,the permeate flux of O-PAN nanofiber membrane stabilized at 227.91 L·m^(-2)·h^(-1)(25
℃,0.05 MPa)while the SiO2 rejection above 99.6%,which showed excellent solvent resistance and separation performance.In order to further explore the application of the O-PAN nanofiber membrane,the OPAN nanofiber membrane was treated with fluoride and used in oil/water separation process.The O-PAN nanofiber membrane after hydrophobic treatment showed excellent hydrophobicity and good oil/water separation performance with the permeate flux about 969.59 L·m^(-2)·h^(-1)while the separation efficiency above 96.1%.The O-PAN nanofiber membrane exhibited a potential application prospect in harsh environment separation.

Low-Temperature Carbonized Nitrogen-Doped Hard Carbon Nanofiber Toward High-Performance Sodium-Ion Capacitors

Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nitrogen-doped hard carbon nanofibers(NHCNFs)were prepared by a lowtemperature carbonization treatment assisted with electrospinning technology.Density functional theory analysis elucidates the incorporation of nitrogen heteroatoms with various chemical states into carbon matrix would significantly alter the total electronic configurations,leading to the robust adsorption and efficient diffusion of Na atoms on electrode interface.The obtained material carbonized at 600°C(NHCNF-600)presented a reversible specific capacity of 191.0 mAh g^(−1)and no capacity decay after 200 cycles at 1 A g^(−1).It was found that the sodium-intercalated degree had a correlation with the electrochemical impedance.A sodium-intercalated potential of 0.2 V was adopted to lower the electrochemical impedance.The constructed sodium-ion capacitor with activated carbon cathode and presodiated NHCNF-600 anode can present an energy power density of 82.1 Wh kg^(−1)and a power density of 7.0 kW kg^(−1).

Fabrication of High-Efficiency Polyvinyl Alcohol Nanofiber Membranes for Air Filtration Based on Principle of Stable Electrospinning

A mass flow matching model(MFMM)was established for studying the stable status of solution electrospinning.The study of the solution droplet status at the needle tip focused on various combinations of applied voltages and injection rates to figure out their influence on steadily fabricating polyvinyl alcohol(PVA)nanofibers prepared from PVA spinning solutions with two different mass fractions(10%and 16%).The results revealed that during the stable electrospinning,the influence resulted from the change of the injection rate approximately canceled out the impact brought by adjusting the applied voltage,leading to almost the same morphology as that of the PVA nanofibers.And the mass fraction of PVA in the spinning solution dominated the structure and the diameter distribution of the electrospun nanofibers.Under stable electrospinning conditions,the composite membrane was produced by depositing PVA nanofibers on the polyethylene terephthalate(PET)nonwoven substrate for an air filtration test.Furthermore,the prepared composite membrane exhibited a high air filtration efficiency(99.97%)and a low pressure drop(120 Pa)for 300-500 nm neutralized polystyrene latex(PSL)aerosol particles,demonstrating its potential as an alternative for a variety of commercial applications in air filtration.

Cellulose nanofiber-derived carbon aerogel for advanced room-temperature sodium–sulfur batteries

Room-temperature sodium–sulfur(RT/Na–S)batteries are regarded as promising large-scale stationary energy storage systems owing to their high energy density and low cost as well as the earth-abundant reserves of sodium and sulfur.However,the diffusion of polysulfides and sluggish kinetics of conversion reactions are still major challenges for their application.Herein,we developed a powerful and functional separator to inhibit the shuttle effect by coating a lightweight three-dimensional cellulose nanofiber-derived carbon aerogel on a glass fiber separator(denoted NSCA@GF).The hierarchical porous structures,favorable electronic conductivity,and three-dimensional interconnected network of N,S-codoped carbon aerogel endow a multifunctional separator with strong polysulfide anchoring capability and fast reaction kinetics of polysulfide conversion,which can act as the barrier layer and an expanded current collector to increase sulfur utilization.Moreover,the hetero-doped N/S sites are believed to strengthen polysulfide anchoring capability via chemisorption and accelerate the redox kinetics of polysulfide conversion,which is confirmed from experimental and theoretical results.As a result,the assembled Na–S coin cells with the NSCA@GF separator showed a high reversible capacity(788.8 mAh g^(−1) at 0.1 C after 100 cycles)and superior cycling stability(only 0.059%capacity decay per cycle over 1000 cycles at 1 C),thereby demonstrating the significant potential for application in high-performance RT/Na–S batteries.

Bimetallic ZIFs-derived electrospun carbon nanofiber membrane as bifunctional oxygen electrocatalyst for rechargeable zinc-air battery

The recharged zinc-air battery(ZAB) has drawn significant attention owing to increasing requirement for energy conversion and storage devices.Fabricating the efficient bifunctional oxygen catalyst using a convenient strategy is vitally important for the rechargeable ZAB.In this study,the bimetallic ZIFs-containing electrospun(ES) carbon nanofibers membrane with hierarchically porous structure was prepared by coaxial electrospinning and carbonization process,which was expected to be a bifunctional electrocatalyst for ZABs.Owing to the formed dual single-atomic sites of Co-N_(4) and Zn-N_(4),the obtained ES-Co/ZnCNZIFexhibited the preferable performance toward oxygen reduction reaction(ORR) with E1/2of 0.857 V and JLof 5.52 mA cm^(-2),which were more than Pt/C.Meanwhile,it exhibited a marked oxygen evolution reaction(OER) property with overpotential of 462 mV due to the agglomerated metallic Co nanoparticles.Furthermore,the ZAB based on the ES-Co/Zn-CNZIFcarbon nanofibers membranes delivered peak power density of 215 mW cm^(-2),specific capacity of 802.6 mA h g^(-1),and exceptional cycling stability,far larger than Pt/C+RuO_(2)-based ZABs.A solid-state ZAB based on ES-Co/Zn-CNZIFshowed better flexibility and stability with different bending angles.

Electrospun gelatin/chitosan nanofibers containing curcumin for multifunctional food packaging

Recently,food grade nanofiber-based materials have received growing attentions in food packaging.In this work,novel active and intelligent packaging nanofibers based on gelatin/chitosan with curcumin(GA/CS/CUR)were developed via electrospinning technique.Effects of the incorporation of CUR content(0.1%-0.3%,m/m)on the microstructure and functional properties of the electrospun nanofibers were investigated.Morphological studies using scanning electron microscopy indicated that loading CUR can affect the average diameter of nanofiber mats,which remained around 160-180 nm.The addition of an appropriate level CUR(0.2%,m/m)led to a stronger intermolecular interaction,and thus enhanced the thermal stability and tensile strength of the obtained nanofibers.Meanwhile,the incorporation of CUR significantly improved antioxidant activity and the antimicrobial activity of GA/CS/CUR nanofibers.Moreover,the sensitivity of nanofibers to ammonia results indicated that GA/CS nanofibers containing 0.2%CUR(GA/CS/CURⅡ)presented high sensitivity of colorimetric behavior to ammonia(within 3 min).These results suggest GA/CS/CURⅡnanofibers has great potential as a multifunctional packaging to protect and monitor the freshness of proteinrich animal foods,such as meat and seafood.