Preparation and characterization of Pd/Fe bimetallic nanoparticles immobilized on Al_2O_3/PVDF membrane:Parameter optimization and dechlorination of dichloroacetic acid

Using a liquid-solid phase inversion method, a hybrid matrix poly（vinylidene fluoride）（PVDF） membrane was prepared with alumina（Al2O3） nanoparticle addition. Pd/Fe nanoparticles（NPs） were successfully immobilized on the Al2O3/PVDF membrane, which was characterized by Scanning Electron Microscopy（SEM） and Transmission Electron Microscopy（TEM）. The micrographs showed that the Pd/Fe NPs were dispersed homogeneously. Several important experimental parameters were optimized, including the mechanical properties, contact angle and surface area of Al2O3/PVDF composite membranes with different Al2O3 contents. At the same time, the ferrous ion concentration and the effect of hydrophilization were studied. The results showed that the modified Al2O3/PVDF membrane functioned well as a support. The Al2O3/PVDF membrane with immobilized Pd/Fe NPs exhibited high efficiency in terms of dichloroacetic acid（DCAA） dechlorination. Additionally, a reaction pathway for DCAA dechlorination by Pd/Fe NPs immobilized on the Al2O3/PVDF membrane system was proposed.

Determination of Particle Sizes and Crystalline Phases on Colloidal Silicon Nanoparticle Suspensions

Particle size and crystallinity of silicon nanoparticles were determined by analyzing the optical extinction spectra of colloidal suspensions. Experimental results from these colloids were anaiyzed using Mie theory in connection with effective medium theory, in order to determine particle sizes and their internal structure with the simple technique of optical transmission spectroscopy. By modeling an effective refractive index for the particles, the crystalline volume fraction can be extracted from extinction spectra in addition to information about the size. The crystalline volume fraction determined in this way were used to calibrate the ratio of the Raman cross sections for nanocrystalline and amorphous silicon, which was found to be σc./σa = 0.66

Controllable preparation of particles with microfluidics

This paper reviews recent development and achievements in controllable preparation of nanoparticles, micron spherical and non-spherical particles, using microfluidics. A variety of synthesis strategies are presented and compared, including single-phase and multiphase microflows. The main structures of microfluidic devices and the fundamental principles of microflows for particle preparation are summarized and identified. The controllability of particle size, size distribution, crystal structure, morphology, physical and chemical properties, is examined in terms of the special features of microfluidic reactors. An outlook on opinions and predictions concerning the future development of powder technology with microfluidics is specially provided.

From micro-to nanosized particles:Selected characterization methods and measurable parameters

Airborne micro- and nanoparticles-aerosols - play an important role in many natural phenomena and in a variety of industrial processes, as well as the public health issue. They may be of natural or anthropogenic origin; their presence in an environment might be intentional or due to undesirable release. In any case, merely the particle detection and characterization, ideally in real-time, provide an insight into the potential burden allowing also controlling and abatement measures. Due to the broad size range it is not possible to characterize the entire particle spectrum with only one method. This contribution discusses selected optical techniques based on elastic light scattering, which are suitable for characterization of micrometer sized particles and particular electrical techniques allowing measurement of nanoparticles. It is shown that combination of instruments measuring different properties of the same nanoparticles offers derivative parameters contributing to more complete characterization of aerosols

Scalable gas-phase processes to create nanostructured particles

The properties of nanoparticles are often different from those of larger grains of the same solid material because of their very large specific surface area. This enables many novel applications, but properties such as agglomeration can also hinder their potential use. By creating nanostructured particles one can take optimum benefit from the desired properties while minimizing the adverse effects. We aim at developing high-precision routes for scalable production of nanostructured particles. Two gas-phase synthesis routes are explored. The first one - covering nanoparticles with a continuous layer - is carried out using atomic layer deposition in a fluidized bed. Through fluidization, the full surface area of the nanoparticles becomes available. With this process, particles can be coated with an ultra-thin film of constant and well-tunable thickness. For the second route - attaching nanoparticles to larger particles - a novel approach using electrostatic forces is demonstrated. The micron-sized particles are charged with one polarity using tribocharging. Using electrospraying, a spray of charged nanoparticles with opposite polarity is generated. Their charge prevents agglomeration, while it enhances efficient deposition at the surface of the host particle. While the proposed processes offer good potential for scale-up, further work is needed to realize large-scale processes.

Fluidization of nano and sub-micron powders using mechanical vibration

The fluidization behavior of nano and sub-micron powders belonging to group C of Geldart＇s classification was studied in a mechanically vibrated fluidized bed （vibro-fluidized bed） at room temperature. Pretreated air was used as the fluidizing gas whereas SiO2. Al2O3, TiO2, ZrSi, BaSO4 were solid particles. Mechanical vibration amplitudes were 0.1, 0.25, 0.35, 0.45mm, while the frequencies were 5, 20, 30, 40 Hz to investigate the effects of frequency and amplitude of mechanical vibration on minimum fluidization velocity, bed pressure drop, bed expansion, and the agglomerate size and size distribution, A novel technique was employed to determine the apparent minimum fluidization velocity from pressure drop signals. Richardson-Zaki equation was employed as nano-particles showed fluid like behavior when fluidized. The average size of agglomerates formed on top of the bed was smaller than those at the bottom, Size distribution of agglomerates on top was also more uniform compared to those near the distributor. Larger agglomerates at the bottom of the bed formed a small fraction of the bed particles. Average size of submicron agglomerates decreased with increasing the frequency of vibration, however nano particles were less sensitive to change in vibration frequency. Mechanical vibration enhanced the quality of fluidization by reducing channeling and rat-holing phenomena caused by interparticle cohesive forces.