Combining nanomaterials with complementary properties in a well-designed structure is an effective tactic to exploit multifunctional, high-performance materials for the energy conversion and storage. Nonprecious metal...Combining nanomaterials with complementary properties in a well-designed structure is an effective tactic to exploit multifunctional, high-performance materials for the energy conversion and storage. Nonprecious metal catalysts, such as cobalt oxide, with superior activity and excellent stability to other catalysts are widely desired. Nevertheless, the performance of CoO nanoparticles as an electrode material were significantly limit for its inferior conductivity, dissolution, and high cohesion. Herein, we grow ultrafine cobalt monoxide to decorate the interlayer and surface of the Ti3C2 Txnanosheets via a hydrothermal method companied by calcination. The layered MXenes act as the underlying conductive substrate,which not only increase the electron transfer rate at the interface but also greatly improve the electrochemical properties of the nanosized Co O particles by restricting the aggregation of CoO. The resulting CoO/Ti3C2 Txnanomaterial is applied as oxygen electrode for lithium-oxygen battery and achieves more than 160 cycles and first cycle capacity of 16,220 mAh g-1 at 100 mA g-1. This work paves a promising avenue for constructing a bi-functional catalyst by coupling the active component of a transition metal oxide(TMO) with the MXene materials in lithium-oxygen battery.展开更多
All-solid-state lithium batteries(ASSLBs) based on sulfide solid-state electrolytes and high voltage layered oxide cathode are regarded as one of the most promising candidates for energy storage systems with high ener...All-solid-state lithium batteries(ASSLBs) based on sulfide solid-state electrolytes and high voltage layered oxide cathode are regarded as one of the most promising candidates for energy storage systems with high energy density and high safety.However,they usually suffer poor cathode/electrolyte interfacial stability,severely limiting their practical applications.In this work,a core-shell cathode with uniformly nanosized Li0.5La0.5TiO3(LLTO) electrolyte coating on LiNi0.5Co0.3Mn0.2O2(NCM532) is designed to improve the cathode/electrolyte interface stability.Nanosized LLTO coating layer not only significantly boosts interfacial migration of lithium ions,but also efficiently alleviates space-charge layer and inhibits the electrochemical decomposition of electrolyte.As a result,the assembled ASSLBs with high mass loading(9 mg cm-2)LLTO coated NCM532(LLTO@NCM532) cathode exhibit high initial capacity(135 mAh g^(-1)) and excellent cycling performance with high capacity retention(80% after 200 cycles) at 0.1 C and 25℃.This nanosized LLTO coating layer design provides a facile and effective strategy for constructing high performance ASSLBs with superior interfacial stability.展开更多
The plasma catalytic degradation of o-xylene in simulated air was improved by loading low amounts of Pt,Pd,or Au onto Co_(3)O_(4).At room temperature,o-xylene conversion and CO_(x)selectivity using a0.1 wt%Pt/Co_(3)O_...The plasma catalytic degradation of o-xylene in simulated air was improved by loading low amounts of Pt,Pd,or Au onto Co_(3)O_(4).At room temperature,o-xylene conversion and CO_(x)selectivity using a0.1 wt%Pt/Co_(3)O_(4)catalyst reached 98.9%and 80%,and the energy efficiency was at the top level in comparison with values in the literature.A stable o-xylene degradation performance could be obtained by online regenerating the heat-insulated reactor with a high energy density.After characterization,it was found that the loading of nanosized Pt not only increased the Co^(3+)/Co^(2+)ratio,where the Co^(3+)benefitted the formation of reactive oxygen species,but also conduced Pt^(0)to oxygen activation,resulting in effective promotion of complete o-xylene oxidation.Operando plasma diffuse reflectance infrared Fourier transform spectroscopy demonstrated the complete o-xylene oxidation and proved that Pt played a key role in the complete oxidation of o-xylene.展开更多
Sol sol gel method and solid phase redox reaction were respectively applied in preparation of Nanosize MnO 2 powders. The experiments showed that only Mn 2O 3 could be obtained from ignition of Mn(Ⅱ) in the muffle fu...Sol sol gel method and solid phase redox reaction were respectively applied in preparation of Nanosize MnO 2 powders. The experiments showed that only Mn 2O 3 could be obtained from ignition of Mn(Ⅱ) in the muffle furnace in air, and Mn 2O 3 had to be disproportionated in acids to gain MnO 2. The analysis of XRD and TEM technique revealed that the diameters of nanosize MnO 2 obtained by sol gel method was 35～45 nm and the x in MnO x was 1 9; the particle size of MnO 2 produced from solid phase redox reaction was 10～20 nm and the x in MnO x equaled 1 94. The test results have proved that the discharge property of alkaline manganese battery could be improved by nanosize MnO 2.展开更多
Nanosized amorphous TiO2 powders with a specific surface area of 501 m2·g-1 were prepared by hydrolysis. After calcined at 400℃ for 2 h, the prepared amorphous TiO2 powders were fully transformed into anatase cr...Nanosized amorphous TiO2 powders with a specific surface area of 501 m2·g-1 were prepared by hydrolysis. After calcined at 400℃ for 2 h, the prepared amorphous TiO2 powders were fully transformed into anatase crystallites with a specific surface area of 141 m2·g-1. Differential scanning calorimetric (DSC) experiments were performed on the samples of nanosized amorphous TiO2 mixed with microsized anatase, nanosized anatase, or nanosized α-Al2O3 respectively. Effects of sample packing, anatase addition, or α-Al2O3 addition on the crystallization behavior of nanosized amorphous TiO2 were analyzed.展开更多
Nanosized SnO2 particles which are uniformly distributed are prepared through sol-gel process using anhydrous SnCl4 and iso-PrOH. By comgaring the results of XRD patterns with the JCPDS standard card of SnO2 and ahaly...Nanosized SnO2 particles which are uniformly distributed are prepared through sol-gel process using anhydrous SnCl4 and iso-PrOH. By comgaring the results of XRD patterns with the JCPDS standard card of SnO2 and ahalysing the TEM images of the product, we can prove that we got the narrow distributed SnO2 particles. The mean diameter of the particles is about 20 nm even sintered at 700℃ for 2 hours.展开更多
基金supported by the National Natural Science Foundations of China (Grants:21871028,21771024)。
文摘Combining nanomaterials with complementary properties in a well-designed structure is an effective tactic to exploit multifunctional, high-performance materials for the energy conversion and storage. Nonprecious metal catalysts, such as cobalt oxide, with superior activity and excellent stability to other catalysts are widely desired. Nevertheless, the performance of CoO nanoparticles as an electrode material were significantly limit for its inferior conductivity, dissolution, and high cohesion. Herein, we grow ultrafine cobalt monoxide to decorate the interlayer and surface of the Ti3C2 Txnanosheets via a hydrothermal method companied by calcination. The layered MXenes act as the underlying conductive substrate,which not only increase the electron transfer rate at the interface but also greatly improve the electrochemical properties of the nanosized Co O particles by restricting the aggregation of CoO. The resulting CoO/Ti3C2 Txnanomaterial is applied as oxygen electrode for lithium-oxygen battery and achieves more than 160 cycles and first cycle capacity of 16,220 mAh g-1 at 100 mA g-1. This work paves a promising avenue for constructing a bi-functional catalyst by coupling the active component of a transition metal oxide(TMO) with the MXene materials in lithium-oxygen battery.
基金supported by the National Natural Science Foundation of China (51575030, 51532002 and 51872027)Natural Science Foundation of Beijing Municipality (L172023)。
文摘All-solid-state lithium batteries(ASSLBs) based on sulfide solid-state electrolytes and high voltage layered oxide cathode are regarded as one of the most promising candidates for energy storage systems with high energy density and high safety.However,they usually suffer poor cathode/electrolyte interfacial stability,severely limiting their practical applications.In this work,a core-shell cathode with uniformly nanosized Li0.5La0.5TiO3(LLTO) electrolyte coating on LiNi0.5Co0.3Mn0.2O2(NCM532) is designed to improve the cathode/electrolyte interface stability.Nanosized LLTO coating layer not only significantly boosts interfacial migration of lithium ions,but also efficiently alleviates space-charge layer and inhibits the electrochemical decomposition of electrolyte.As a result,the assembled ASSLBs with high mass loading(9 mg cm-2)LLTO coated NCM532(LLTO@NCM532) cathode exhibit high initial capacity(135 mAh g^(-1)) and excellent cycling performance with high capacity retention(80% after 200 cycles) at 0.1 C and 25℃.This nanosized LLTO coating layer design provides a facile and effective strategy for constructing high performance ASSLBs with superior interfacial stability.
基金supported by National Natural Science Foundation of China(No.12075037)Research and Application Service Platform Project of API Manufacturing Environmental Protection and Safety Technology in China(No.2020-0107-3-1)。
文摘The plasma catalytic degradation of o-xylene in simulated air was improved by loading low amounts of Pt,Pd,or Au onto Co_(3)O_(4).At room temperature,o-xylene conversion and CO_(x)selectivity using a0.1 wt%Pt/Co_(3)O_(4)catalyst reached 98.9%and 80%,and the energy efficiency was at the top level in comparison with values in the literature.A stable o-xylene degradation performance could be obtained by online regenerating the heat-insulated reactor with a high energy density.After characterization,it was found that the loading of nanosized Pt not only increased the Co^(3+)/Co^(2+)ratio,where the Co^(3+)benefitted the formation of reactive oxygen species,but also conduced Pt^(0)to oxygen activation,resulting in effective promotion of complete o-xylene oxidation.Operando plasma diffuse reflectance infrared Fourier transform spectroscopy demonstrated the complete o-xylene oxidation and proved that Pt played a key role in the complete oxidation of o-xylene.
文摘Sol sol gel method and solid phase redox reaction were respectively applied in preparation of Nanosize MnO 2 powders. The experiments showed that only Mn 2O 3 could be obtained from ignition of Mn(Ⅱ) in the muffle furnace in air, and Mn 2O 3 had to be disproportionated in acids to gain MnO 2. The analysis of XRD and TEM technique revealed that the diameters of nanosize MnO 2 obtained by sol gel method was 35～45 nm and the x in MnO x was 1 9; the particle size of MnO 2 produced from solid phase redox reaction was 10～20 nm and the x in MnO x equaled 1 94. The test results have proved that the discharge property of alkaline manganese battery could be improved by nanosize MnO 2.
基金Financial support for this study was provided by the National Natural Science Foundation of China(Project No.50006014)
文摘Nanosized amorphous TiO2 powders with a specific surface area of 501 m2·g-1 were prepared by hydrolysis. After calcined at 400℃ for 2 h, the prepared amorphous TiO2 powders were fully transformed into anatase crystallites with a specific surface area of 141 m2·g-1. Differential scanning calorimetric (DSC) experiments were performed on the samples of nanosized amorphous TiO2 mixed with microsized anatase, nanosized anatase, or nanosized α-Al2O3 respectively. Effects of sample packing, anatase addition, or α-Al2O3 addition on the crystallization behavior of nanosized amorphous TiO2 were analyzed.
文摘Nanosized SnO2 particles which are uniformly distributed are prepared through sol-gel process using anhydrous SnCl4 and iso-PrOH. By comgaring the results of XRD patterns with the JCPDS standard card of SnO2 and ahalysing the TEM images of the product, we can prove that we got the narrow distributed SnO2 particles. The mean diameter of the particles is about 20 nm even sintered at 700℃ for 2 hours.
