Galvanization is the process of applying a protective zinc coating to iron or steel to prevent rusting. In the batch hot-dip galvanizing process, large amounts of wastes originate in liquid, solid and gaseous forms. A...Galvanization is the process of applying a protective zinc coating to iron or steel to prevent rusting. In the batch hot-dip galvanizing process, large amounts of wastes originate in liquid, solid and gaseous forms. Acidic waste containing iron and zinc ions is produced due to the cleaning of steel prior to zinc coating, which is considered the galvanizing acid waste. The galvanizing effluent used was collected from LTL Galvanizers Pvt. Ltd., Sapugaskanda, Sri Lanka, and converted into antimicrobial hematite (α-Fe<sub>2</sub>O<sub>3</sub>) nanoparticles. These nanoparticles were synthesized using a chemical precipitation method. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were used to characterize the nanomaterials produced. Two pathogenic bacteria and one pathogenic fungus were used to analyze the antimicrobial activity of the nanomaterials. All the samples showed excellent antibacterial and antifungal properties. And the material can inhibit the growth of both Gram-positive and Gram-negative bacteria. According to the SEM images, some of the hematite particles were around 100 nm in size or less, which confirms that the describing method is viable in synthesizing hematite nanostructures. As shown in the XRD, the major diffraction peak, located at 2θ of 35.617° (110) in addition to minor peaks at 24.87° (012), 33.07° (104), 42.08° (113), 51.18° (024), 53.52° (116) and, 57.46° (018) confirm the spinel structure of iron oxide (α-Fe<sub>2</sub>O<sub>3</sub>). The estimated average crystallite size of the nanomaterial is calculated to be 36.74 nm. The durability of the manufactured nanomaterial is excellent. This method is a time-efficient, environmentally friendly, cost-effective and industrially viable way to manufacture antimicrobial hematite (α-Fe<sub>2</sub>O<sub>3</sub>) nanomaterials from a galvanizing effluent.展开更多
Acicular goethite（a-Fe OOH） and worm-like maghamite（γ-Fe2O3） nanostructures have been prepared adopting a novel route, using Na2[Fe（HL）2（H2O）2] chelate complex in alkaline medium. It is found that concentrati...Acicular goethite（a-Fe OOH） and worm-like maghamite（γ-Fe2O3） nanostructures have been prepared adopting a novel route, using Na2[Fe（HL）2（H2O）2] chelate complex in alkaline medium. It is found that concentration of hydrated Fe（III） ions increased with increasing temperature, which later play a key role in generation of different phases of iron oxide. Phase and morphology of the products are investigated using XRD, FTIR, SEM, and TEM analysis. Using UV–Vis spectra, various electronic transitions of goethite and maghamite particles are examined. Maghamite nanostructures exhibit superparamagnetic property at room temperature. On the basis of experimental observations and analytical data, growth mechanism of the nanostructures is discussed.展开更多
文摘Galvanization is the process of applying a protective zinc coating to iron or steel to prevent rusting. In the batch hot-dip galvanizing process, large amounts of wastes originate in liquid, solid and gaseous forms. Acidic waste containing iron and zinc ions is produced due to the cleaning of steel prior to zinc coating, which is considered the galvanizing acid waste. The galvanizing effluent used was collected from LTL Galvanizers Pvt. Ltd., Sapugaskanda, Sri Lanka, and converted into antimicrobial hematite (α-Fe<sub>2</sub>O<sub>3</sub>) nanoparticles. These nanoparticles were synthesized using a chemical precipitation method. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were used to characterize the nanomaterials produced. Two pathogenic bacteria and one pathogenic fungus were used to analyze the antimicrobial activity of the nanomaterials. All the samples showed excellent antibacterial and antifungal properties. And the material can inhibit the growth of both Gram-positive and Gram-negative bacteria. According to the SEM images, some of the hematite particles were around 100 nm in size or less, which confirms that the describing method is viable in synthesizing hematite nanostructures. As shown in the XRD, the major diffraction peak, located at 2θ of 35.617° (110) in addition to minor peaks at 24.87° (012), 33.07° (104), 42.08° (113), 51.18° (024), 53.52° (116) and, 57.46° (018) confirm the spinel structure of iron oxide (α-Fe<sub>2</sub>O<sub>3</sub>). The estimated average crystallite size of the nanomaterial is calculated to be 36.74 nm. The durability of the manufactured nanomaterial is excellent. This method is a time-efficient, environmentally friendly, cost-effective and industrially viable way to manufacture antimicrobial hematite (α-Fe<sub>2</sub>O<sub>3</sub>) nanomaterials from a galvanizing effluent.
文摘Acicular goethite（a-Fe OOH） and worm-like maghamite（γ-Fe2O3） nanostructures have been prepared adopting a novel route, using Na2[Fe（HL）2（H2O）2] chelate complex in alkaline medium. It is found that concentration of hydrated Fe（III） ions increased with increasing temperature, which later play a key role in generation of different phases of iron oxide. Phase and morphology of the products are investigated using XRD, FTIR, SEM, and TEM analysis. Using UV–Vis spectra, various electronic transitions of goethite and maghamite particles are examined. Maghamite nanostructures exhibit superparamagnetic property at room temperature. On the basis of experimental observations and analytical data, growth mechanism of the nanostructures is discussed.
