For a cyclone, it is possible to improve separation efficiency and reduce pressure drop by increasing the cyclone height. However, an exceeded height increase could result in a dramatical drop in separation efficiency...For a cyclone, it is possible to improve separation efficiency and reduce pressure drop by increasing the cyclone height. However, an exceeded height increase could result in a dramatical drop in separation efficiency. In this study, experimental and computational fluid dynamics simulation results exhibit that the introduction of an apex cone at the dust outlet could avoid the risk of separation efficiency drop but lead to a continuous reducing of the pressure drop. Generally, the optimal cyclone height should be closely related to the natural vortex length. While, when the vortex end contracts into the separation space in the cyclone with an exceeded height, severe back-mixing of particles always occurs, which will result in the decrease of separation efficiency. Herein, it is found that when an apex cone is installed at the dust outlet, the vortex end can be grasped by the cone so as to weaken the back-mixing of particles.Meanwhile, the introduction of this apex cone can enhance the secondary separation to capture the back-mixed particles again so as to protect the efficiency. In addition, it is found that the enhanced secondary separation could come from either the stagnant current of axial velocity in the center or the improved tangential velocity of inner vortex whereas the forcibly extending the length of vortex to exceed its natural length will not significantly increase efficiency.展开更多
基金sponsored by the National Natural Science Foundation of China (21506139 and U1710101)。
文摘For a cyclone, it is possible to improve separation efficiency and reduce pressure drop by increasing the cyclone height. However, an exceeded height increase could result in a dramatical drop in separation efficiency. In this study, experimental and computational fluid dynamics simulation results exhibit that the introduction of an apex cone at the dust outlet could avoid the risk of separation efficiency drop but lead to a continuous reducing of the pressure drop. Generally, the optimal cyclone height should be closely related to the natural vortex length. While, when the vortex end contracts into the separation space in the cyclone with an exceeded height, severe back-mixing of particles always occurs, which will result in the decrease of separation efficiency. Herein, it is found that when an apex cone is installed at the dust outlet, the vortex end can be grasped by the cone so as to weaken the back-mixing of particles.Meanwhile, the introduction of this apex cone can enhance the secondary separation to capture the back-mixed particles again so as to protect the efficiency. In addition, it is found that the enhanced secondary separation could come from either the stagnant current of axial velocity in the center or the improved tangential velocity of inner vortex whereas the forcibly extending the length of vortex to exceed its natural length will not significantly increase efficiency.
