Gas source of the Middle Jurassic Shaximiao Formation in the Zhongjiang large gas field of Western Sichuan Depression:Constraints from geochemical characteristics of light hydrocarbons

The Zhongjiang gas field is a typical large gas field in terrigenous strata of the Western Sichuan Depression.It remains debatable which member of the Upper Triassic Xujiahe Formation served as the source rocks and how significant the member contributed to the gas accumulations in the Zhongjiang gas field.In this study,we analyzed the essential characteristics of the Lower Jurassic source rocks and the geochemical features of light hydrocarbons in natural gas from the 2nd(T_(3)χ^(2))and 4th members(T_(3)χ^(4))of the Upper Triassic Xujiahe Formation(T_(3)χ),as well as the Middle Jurassic Shaximiao(J_(2)s)and Qianfoya(J_(2)q)formations.Based on this,we explored the sources of the natural gas in the Zhongjiang gas field and determined the natural gas migration patterns and their effects on the properties of light hydrocarbons in the natural gas.The results indicate that the Lower Jurassic lacustrine source rocks of the Zhongjiang gas field contain humic organic matter,with vitrinite reflectance(R_(0))values ranging from 0.86%to 0.98%.Samples meeting the criterion for effective source rocks[total organic carbon(TOC)content≥0.75%]exhibited an average TOC content of merely 1.02%,suggesting significantly lower hydrocarbon generation potential than source rocks in the underlying T3x,which show higher thermal maturity and TOC contents.For natural gas samples from T_(3)χ^(2),T_(3)χ^(4),J_(2)s,and J_(2)q reservoirs,their C_(5-7)iso-alkane content was significantly higher than their n-alkane content,and their methylcyclohexane(MCH)index ranged from 59.0%to 77.3%,indicating the predominance of methylcyclohexane in C_(7)light hydrocarbons.As indicated by the origin identification and gas-source correlation based on the geochemical features of light hydrocarbons,the natural gas in the Zhongjiang gas field is typical coal-derived gas.The gas from the primary pay zone of the Shaximiao Formation,with significantly high K_(1),(P_(2)+N_(2))/C_(7),and P_(3)/C_(7)values,predominantly originated from the 5th member of the T3x and migrated in the free phase,with a small amount possibly sourced from the Lower Jurassic source rocks.The dissolution and adsorption during gas migration led to a decrease in the aromatic content in C_(6-7)light hydrocarbons and an increase in the isoheptane values.Therefore,their effects must be considered when determining the gas origin and thermal maturity based on the aromatic content in C_(6-7) light hydrocarbons and iso-heptane values.

Ghost imaging based on the control of light source bandwidth

A scheme to improve the quality in ghost imaging(GI)by controlling the bandwidth of light source(BCGI)is proposed.The theoretical and numerical results show that the reconstruction result with high quality can be obtained by adjusting the bandwidth range of the light source appropriately,and the selection criterion of the bandwidth is analyzed by the power distribution of the imaging target.A proof-of-principle experiment is implemented to verify the theoretical and numerical results.In addition,the BCGI also presents better anti-noise performance when compared with some popular GI methods.

Photoprotective Ability of Sunscreens against Ultraviolet, Visible Light and Near-Infrared Radiation

Despite the widespread prevalence of daily sunscreen usage, solar-induced skin damage continues to occur. We have previously reported that solar visible light and near-infrared, in addition to ultraviolet radiation, perform as aging factors and induce deleterious effects such as photoaging, vasodilation, muscle thinning, skin ptosis, photoimmunosupression and photocarcinogenesis. Despite this, most commonly used sunscreens only block ultraviolet radiation. To evaluate the complete solar-spectrum blocking ability of sunscreens produced by internationally well-known companies, a double-beam spectrophotometer was used to optically measure the transmission spectra. The spectrophotometer utilizes a unique, single monochromatic design covering a wavelength range of 240 to 2600 nm. Sunscreens (thickness, 0.1 mm, SPF50+, PA+++ or ++++) from internationally well-known companies blocked 78.8% - 99.9% of ultraviolet, 33.4% - 99.6% of visible light, and 27.0% - 76.4% of near-infrared. It can be concluded that while most commercially available sunscreens filter ultraviolet radiation, they are not effective at blocking visible light and near-infrared radiation. The results of this study imply that sunscreens that provide comprehensive photoprotection from ultraviolet through to near-infrared should be considered to prevent skin photodamage.

Novel Low Viscosity Zinc Oxide, Iron Oxides and Erioglaucine Sunscreen Potential to Protect from Ultraviolet, Visible Light and Near-Infrared Radiation

Despite the widespread recommendation and use of sunscreens and ultraviolet blocking materials, solar-induced skin damage and photoageing continues to pose a problem to human health worldwide. We have previously reported that solar visible light and near-infrared also contribute to skin damage and photo ageing. Most commonly recommended sunscreens are only effective throughout the UV spectrum, offering no protection from visible light and near-infrared. A possible solution could be to augment sunscreens with metal oxides which block visible light and near-infrared radiation. To evaluate the enhanced solar-spectrum blocking ability of novel low viscosity sunscreen containing zinc and iron oxides, a double-beam spectrophotometer was used to optically measure the transmission spectra. The spectrophotometer deploys a unique, single monochromatic design to detect wavelength penetration in the range of 240 to 2600 nm. The Sunscreen base without zinc oxide and iron oxides (control) blocked over 80% of ultraviolet-C and ultraviolet-B but did not block ultraviolet-A, visible light, or near-infrared. The novel low viscosity zinc oxide sample blocked almost over 90% ultraviolet, but did not block visible light and near-infrared sufficiently. However, the samples with the novel low viscosity zinc oxide, iron oxides and erioglaucine blocked almost over 90% of ultraviolet, visible light and near-infrared. It can be concluded that this novel combination of low viscosity zinc oxide, iron oxides and erioglaucine is effective at blocking ultraviolet, visible light and near-infrared radiation. The results of this study imply that sunscreens that provide comprehensive photoprotection from ultraviolet through to near-infrared should be adopted to prevent skin photodamage.

Photoprotective Ability of Colored Iron Oxides in Tinted Sunscreens against Ultraviolet, Visible Light and Near-Infrared Radiation

Solar-induced skin damage continues to pose a problem to human health worldwide, despite the widespread recommendation and use of sunscreens. We have previously reported that solar visible light and near-infrared also contribute to skin damage and photoageing. Most commonly recommended sunscreens are only effective throughout the UV spectrum, offering no protection from visible light and near-infrared. To evaluate the enhanced solar-spectrum blocking ability of iron oxides, a double-beam spectrophotometer was used to optically measure the transmission spectra. The spectrophotometer deploys a unique, single monochromatic design to detect wavelength penetration in the range of 240 to 2600 nm. The sample without iron oxide (control) blocked over 80% of ultraviolet-C and ultraviolet-B but did not block ultraviolet-A, visible light, or near-infrared wavelengths. The samples with yellow, and red iron oxide blocked over 90% ultraviolet, but did not block visible light and near-infrared effectively. The sample with black iron oxide blocked visible light, and near-infrared effectively compared with other samples with yellow, blue, and red iron oxide. The sample with red and black iron oxides, and the sample with yellow, blue, red, and black iron oxides blocked ultraviolet through to near-infrared. It can be concluded that dark colored iron oxide combinations are effective at blocking from ultraviolet through to visible light and near-infrared radiation. The results of this study may also suggest that biological colour of human skin and subcutaneous tissues are conserved for comprehensive photoprotection.

Metamerism Appreciation of Jadeite-Jade Green under the Standard Light Sources D_(65),A and CWF

We tested 288 pieces of the polished cabochon jadeite-jade with high quality green and smooth surfaces using the colorimeter Color i5 based on the CIE 1976 L＊a＊b＊ uniform color space. The color changes after alternating three CIE standard light sources D65, A and CWF were compared, and the degree of metamerism was evaluated. The results show that the CIE standard light sources D65, A and CWF increase the chroma of green and turn bluish green into vivid green, which are similar or to nearly colorless and transparent glass-like samples with fine textures. When the three light sources were individually alternated, the lightness of the jadeite-jades showed little change, but the tone changed significantly. Metamerism occurred only in 3 pairs among the 16 samples that were selected by cluster analysis for quality, and the metamerism colors were highly consistent of L＊D65∈（43.47, 46.75）, C＊D65∈（65.20, 68.80） and ho＊D65∈（138.10, 140.23）. We can conclude that the jadeite-jade green gradually turns to blue when the color temperature of the light source increases. But when considering both the light sources and the samples, D65 is more suitable to be the light source of jadeite-jade green when compared with the light sources CWF and A. Compared with the CIE standard green and high chroma green, high-quality jadeite-jade green has a slight yellow tone, low lightness and high chroma. The special metamerism index decreased to 1 when the light source alternated among D65, A and CWF. Therefore, the color of jadeite-jade green might be slightly influenced by alternating of the light sources.

Early gastric cancer diagnostic ability of ultrathin endoscope loaded with laser light source

BACKGROUND Conventionally, the low luminous intensity, low image resolution, and difficulty in operation have been reported with the ultrathin endoscope. However, it has markedly advanced recently. The improvement of the diagnostic ability is expected.AIM To compare the early gastric cancer diagnostic ability of an ultrathin endoscope loaded with a laser light source and that of the conventional endoscope.METHODS The target subjects were 375 consecutive patients who underwent endoscopy at our hospital for post-endoscopic submucosal dissection follow-up of gastric cancer from January to August 2018. During endoscopy, the ultrathin endoscope was used in 140 patients(37.3%), and the conventional endoscope was used in235 patients(62.7%). Patient background was adjusted using the propensity score matching method, and gastric cancer detection ability was evaluated in the two groups.RESULTS The gastric cancer detection rate was 7.8% in the ultrathin endoscope group and7.0% in the conventional endoscope group, and the mean intragastric observation time was 4.1 ± 1.7 min in the ultrathin endoscope group and 4.1 ± 1.9 min in the conventional endoscope group, showing no significant differences between the groups. Moreover, the biopsy implementation rate was 31.8% in the ultrathin endoscope group and 41.1% in the conventional endoscope group, and the biopsy prediction rate was 17.9% and 13.2%, respectively, showing no significant differences between the groups.CONCLUSION The gastric cancer diagnostic ability of the ultrathin endoscope loaded with a laser light source was comparable to that of the conventional endoscope. The observation time was also comparable. Thus, endoscopy using the ultrathin endoscope loaded with the laser light source would be the first option in screening examinations of gastric cancer due to its low invasion.

Fast recognition using convolutional neural network for the coal particle density range based on images captured under multiple light sources

A method based on multiple images captured under different light sources at different incident angles was developed to recognize the coal density range in this study.The innovation is that two new images were constructed based on images captured under four single light sources.Reconstruction image 1 was constructed by fusing greyscale versions of the original images into one image,and Reconstruction image2 was constructed based on the differences between the images captured under the different light sources.Subsequently,the four original images and two reconstructed images were input into the convolutional neural network AlexNet to recognize the density range in three cases:-1.5(clean coal) and+1.5 g/cm^(3)(non-clean coal);-1.8(non-gangue) and+1.8 g/cm^(3)(gangue);-1.5(clean coal),1.5-1.8(middlings),and+1.8 g/cm^(3)(gangue).The results show the following:(1) The reconstructed images,especially Reconstruction image 2,can effectively improve the recognition accuracy for the coal density range compared with images captured under single light source.(2) The recognition accuracies for gangue and non-gangue,clean coal and non-clean coal,and clean coal,middlings,and gangue reached88.44%,86.72% and 77.08%,respectively.(3) The recognition accuracy increases as the density moves further away from the boundary density.

Adaptive illumination light source for online machine vision inspection of tin steel strips

The different reflection characteristics of the surface of tin steel strips and the different speeds of the tinning line demand an adaptive illumination light source for online machine vision inspection. This light source can be integrated with a time delay integration charge-coupled device （TDI CCD ） to capture the images of moving objects and facilitate inspection of the surface quality of tin steel strips. On-site application show the effectiveness of the TDI camera with the adaptive illumination light source in detecting the surface defects on tin steel strips of three different materials and with different tin coating weights.

High efficiency and high transmission asymmetric polarization converter with chiral metasurface in visible and near-infrared region

Polarization manipulation of light is of great importance because it could promote development of wireless communications,biosensing,and polarization imaging.In order to use natural light more efficiently,it is highly demanded to design and fabricate high performance asymmetric polarization converters which could covert the natural light to one particular linearly polarized light with high efficiency.Traditionally,polarizers could be achieved by controllers with crystals and polymers exhibiting birefringence.However,the polarizers are bulky in size and the theoretical conversion efficiency of the polarizers is limited to 0.5 with unpolarized light incidence.In this paper,we propose a polarization converter which could preserve high transmission for one linearly polarized light and convert the orthogonal linearly polarized light to its cross-polarized with high transmittance based on a multi-layer chiral metasurface.Theoretical results show that normally incident y-polarized light preserves high transmittance for the wavelength range from 685 nm to 800 nm while the orthogonal normally incident x-polarized light is efficiently converted to the y-polarized light with high transmittance from 725 nm to 748 nm.Accordingly,for unpolarized light incidence,transmittance larger than 0.5 has been successfully achieved in a broadband wavelength range from 712 nm to 773 nm with a maximum transmittance of 0.58 at 732 nm.

Near-infrared lead chalcogenide quantum dots:Synthesis and applications in light emitting diodes

This paper reviews the recent progress in the synthesis of near-infrared(NIR) lead chalcogenide(PbX;PbX = PbS,PbSe, PbTe) quantum dots(QDs) and their applications in NIR QDs based light emitting diodes(NIR-QLEDs). It summarizes the strategies of how to synthesize high efficiency PbX QDs and how to realize high performance Pb X based NIR-QLEDs.

A laser-produced plasma source based on thin-film Gd targets for next-generation extreme ultraviolet lithography

We have studied laser-produced plasma based on mass-limited thin-film Gd targets for beyond the current extreme ultraviolet(EUV)light source of 13.5 nm wavelength based on tin.The influences of the laser intensity on the emission spectra centered around 6.7 nm from thin-film Gd targets were first investigated.It is found that the conversion efficiency of the produced plasma is saturated when the laser intensity goes beyond 2×10^(11)W cm^(-2).We have systematically compared the emission spectra of the laser-produced plasma with the changes in the thicknesses of the thin-film Gd targets.It is proved that a minimum-mass target with a thickness of 400 nm is sufficient to provide the maximum conversion efficiency,which also implies that this thickness is the ablation depth for the targets.These findings should be helpful in the exploration of next-generation EUV sources,as the thin-film Gd targets will reduce the debris during the plasma generation process compared with the bulk targets.

Watts-level ultraviolet-CLED integrated light sources for efficient surface and air sterilization

With the epidemic of the coronavirus disease(COVID-19) infection, AlGaN-based ultraviolet-C light emitting diodes(UVC-LEDs) have attracted widespread attention for their sterilization application. However, the sterilization characters of high power integrated light sources(ILSs) haven’t been widely investigated before utilizing in public sanitary security. In this work,by integrating up to 195 UVC-LED chips, high power UVC-LED ILSs with a light output power(LOP) of 1.88 W were demonstrated. The UVC-LED ILSs were verified to have efficient and rapid sterilization capability, which have achieved more than99.9% inactivation rate of several common pathogenic microorganisms within 1 s. In addition, the corresponding air sterilization module based on them was also demonstrated to kill more than 97% of Staphylococcus albus in the air of 20 m3 confined room within 30 min. This work demonstrates excellent sterilization ability of UVC-LED ILSs with high LOP, revealing great potential of UVC-LEDs in sterilization applications in the future.

Multi-watt near-infrared light therapy as a neuroregenerative treatment for traumatic brain injury

Infrared light represents a broad spectrum of light with wavelengths from 700 nm to 1 million nm（1,000 microns）.At its shortest wavelengths（referred to as near-infrared）,it merges with the red spectrum of visible light.At the longest end（referred to as far-infrared）,it blends into the range of microwaves.

Quantum light source devices of In(Ga)As semiconductor self-assembled quantum dots

A brief introduction of semiconductor self-assembled quantum dots (QDs) applied in single-photon sources is given. Single QDs in confined quantum optical microcavity systems are reviewed along with their optical properties and coupling characteristics. Subsequently, the recent progresses in In(Ga)As QDs systems are summarized including the preparation of quantum light sources, multiple methods for embedding single QDs into different microcavities and the scalability of single-photon emitting wavelength. Particularly, several In(Ga)As QD single-photon devices are surveyed including In(Ga)As QDs coupling with nanowires, InAs QDs coupling with distributed Bragg reflection microcavity and the In(Ga)As QDs coupling with micropillar microcavities. Furthermore, applications in the field of single QDs technology are illustrated, such as the entangled photon emission by spontaneous parametric down conversion, the single-photon quantum storage, the chip preparation of single-photon sources as well as the single-photon resonance-fluorescence measurements.

New LED light source system with uniform illumination for line-scan CCD imaging systems

A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of the integrating sphere and requirement of the strip uniform illumination region. This system was called dome light. White light LED array light sources were used for uniform illumi- nation. The LEDs were filtrated to composite array light source based on coefficient of variation of a single LED. The standard white board and SG color checkers were used in the line-scan CCD imaging experiments under the dome light and ordinary illumination light source. The average color difference （AE） of SG color checkers in CIELAB space was 2. 091 under the dome light and 2. 286 under ordinary illumination light source respectively. Experimental results indicate that the dome light can satisfy illumination uniformity and color rendering consistency for line-scan CCD and provide a standard light source for uniform calibration of different cameras.

Quantum light sources from semiconductor

Semiconductor provides a physics-rich environment to host various quantum light sources applicable for quantum information processing. These light sources are capable of deterministic generation of non-classical photon streams that demonstrate antibunching photon statistics, strong indistinguishability, and high-fidelity entanglement. Some of them have even successfully transitioned from proof-ofconcept to engineering efforts with steadily improving performance[ 1]. Here, we briefly summarize recent efforts and progress in the race towards ideal quantum light sources based on semiconductor materials. The focus of this report will be on group III–V semiconductor quantum dots, defects in wide band-gap materials, emitters in two-dimensional van der Waals layered hosts, and carbon nanotubes, as these systems are well-positioned to benefit from recent breakthroughs in nanofabrication and materials growth techniques.

Preface to the Special Issue on Quantum Light Source from Semiconductors

The invention of laser has tremendously changed the world. Great efforts have been made to increase the laser power, in which each pulse contains many photons. On the other hand, researchers also play a lot of interests on the generation of a single photon in a single pulse, i.e., the single photon sources. Single photons and their strongly correlated components (e.g. entangled photons) have played critical roles in the development of quantum mechanics. Nowadays, these quantum light sources have also found important applications in modern quantum information processing, such as quantum communication, quantum metrology and quantum computation. Many different kinds of methods have been developed to generate these quantum light sources. Semiconductors are of particular appealing materials.

A compact Einstein–Podolsky–Rosen entangled light source

We present a stable entangled light source that integrates the pump laser, entanglement generator, detectors, and electronic control systems. By optimizing the design of the mechanical elements and the optical path, the size of the source is minimized, and the quantum correlations over 6 d B can be directly provided by the entangled source. The compact and stable entangled light source is suitable for practical applications in quantum information science and technology. The presented protocol provides a useful reference for manufacturing products of bright entangled light sources.

A Light Source System of Multi-star Simulator with Adjustable Background and Controllable Magnitude

A light source of multi-star simulator capable of background adjustment and magnitude control has been designed.Two integrating spheres are employed as the star-point light source and the background light source respectively.A beam splitter prism has been designed to serve as the beam combiner for the star-point and the background light sources,and a mathematical model has been constructed respectively to compute the light flux of the two integrating spheres.A magnitude testing system and a background testing system have been created using low-light illuminometer,luminance meter,and testing instruments to measure the star-point magnitude and the background luminance of the multi-star simulator.The test results suggest that the star-point magnitude is adjustable from0 to+5 m_v,with a simulation precision superior to ±0.026 m_v.The maximum background luminance is 3.8×10~5 cd·m^(-2),and the minimum background luminance is6.4×10^(-2)cd·m^(-2).The designed light source system can meet the requirements for simulating the stellar map with a sky background.