Near-surface wind field characteristics of the desert-oasis transition zone in Dunhuang,China

The desert-oasis transition zone(DOTZ)serves as a buffer area between the desert and oasis.Understanding its wind field characteristics is of great significance for the prevention and control of aeolian disasters in the oasis.In this study,we used meteorological data during 2013–2019 from the portable meteorological stations at five sites(site A on the edge of the oasis,sites B,C,and D in the DOTZ,and site O in the desert)in Dunhuang,China to analyze the near-surface wind field characteristics and their causes,as well as to reveal the key role of the DOTZ in oasis protection.The results showed that the mean wind speed,frequency of sand-driving wind,and directional variability of wind decreased from west to east within the DOTZ,and wind speed was significantly affected by air temperature.The terrain influenced the prevailing winds in the region,mainly from northeast and southwest.Only some areas adjacent to the oasis were controlled by southeasterly wind.This indicated that the near-surface wind field characteristics of the DOTZ were caused by the combined effects of local terrain and surface hydrothermal difference.At site D,the annual drift potential(DP)was 24.95 vector units(VU),indicating a low wind energy environment,and the resultant drift direction(RDD)showed obvious seasonal differences.Additionally,the DOTZ played an important buffering role between the desert and oasis.Compared with the desert,the mean wind speed in the oasis decreased by 64.98%,and the prevailing wind direction was more concentrated.The results of this study will be useful in interpreting the aeolian activity of the DOTZ in Dunhuang.

3D near-surface P-wave velocity structure imaging with Distributed Acoustic Sensing and electric hammer source

Distributed Acoustic Sensing(DAS) is an emerging technique for ultra-dense seismic observation, which provides a new method for high-resolution sub-surface seismic imaging. Recently a large number of linear DAS arrays have been used for two-dimensional S-wave near-surface imaging in urban areas. In order to explore the feasibility of three-dimensional(3D) structure imaging using a DAS array, we carried out an active source experiment at the Beijing National Earth Observatory. We deployed a 1 km optical cable in a rectangular shape, and the optical cable was recast into 250 sensors with a channel spacing of 4 m. The DAS array clearly recorded the P, S and surface waves generated by a hammer source. The first-arrival P wave travel times were first picked with a ShortTerm Average/Long-Term Average(STA/LTA) method and further manually checked. The P-wave signals recorded by the DAS are consistent with those recorded by the horizontal components of short-period seismometers. At shorter source-receiver distances, the picked P-wave arrivals from the DAS recording are consistent with vertical component recordings of seismometers, but they clearly lag behind the latter at greater distances.This is likely due to a combination of the signal-to-noise ratio and the polarization of the incoming wave. Then,we used the Tomo DD software to invert the 3D P-wave velocity structure for the uppermost 50 m with a resolution of 10 m. The inverted P-wave velocity structures agree well with the S-wave velocity structure previously obtained through ambient noise tomography. Our study indicates the feasibility of 3D near-surface imaging with the active source and DAS array. However, the inverted absolute velocity values at large depths may be biased due to potential time shifts between the DAS recording and seismometer at large source-receiver distances.

Spatial Variability of Microclimate Characteristics in Transition Zone of the Forest: A Case Study of Slătioara Secular Forest

Although the importance of forest margins in ecology is recognized, no study has been carried out in the Slătioara Secular Forest Reserve with reference to the variability of abiotic parameters along forest margins. With this study, we investigate to what extent microclimatic variables (air temperature—T_air, air humidity—H_air, soil temperature—T_soil, soil humidity—H_soil wind intensity (WIND) and photosynthetically active radiation intensity (PAR)) are correlated with the distance from the edge to the forest interior and the habitat type (forest interior, inner and outer edge and meadow) in the Slătioara Secular Forest Reserve. In order to measure these microenvironment variables we used the strip transect method, positioned perpendicular to the forest edge. Differences in the microenvironment variables considered in the analysis between the four habitat types were assessed using one-way ANOVA followed by Tukey-test post-hoc. To assess differences along transects, each of the six measurements went through a one-way ANOVA against distance to edge, followed by a Levene’s test for variances and finally a Tukey-test post-hoc. The results indicate that the values of microclimatic variables were significantly different in relation to the gradient of distance from the edge and to the habitat type (interior-exterior forest) and that edge habitats are significantly more susceptible to lower humidity, high winds, lower light and higher air temperatures than forest interior habitats. The ecological study of the edge areas in this reserve provides the basis for future research on forest dynamics and can guide conservation efforts to maintain the diversity and endemism of species in the Slătioara Secular Forest.

Microclimate and Its Formation Mechanism in Cunninghamia lanceolata Hook. Plantation Ecosystems in the Subtropical Zone of China

Microclimate characteristics and related environmental energy mechanisms were examined based on the long term located observations in the mature, thinned and young Cunninghamia lanceolata plantation ecosystems in western Hunan Province, China. The results show that the mature plantation ecosystem can improve the microclimate significantly by regulating the amount and spatial distribution of environmental energy, which delineates the pattern of the microclimate in forest ecosystems in the process of ecological restoration. Compared with the young plantation, the mature plantation ecosystem decreased annual mean air temperature by 0 4℃. The maximum decrease in monthly mean air temperature was 2 3℃. The mature plantation ecosystem decreased annual mean ground temperature by 1 2℃ with a maximum decrease in monthly mean ground temperature of 2 3℃. Mainly due to the dense canopy, the mature forest ecosystem regulates the distribution of radiation energy, and expenditure ratios of heat budget and principal energy components to decrease temperature or make it even.

Effects of N Rates on Canopy Microclimate and Population Health in Irrigated Rice

Objective The aim was to elucidate the effects of N rates on rice canopy microclimate and community health so as to provide a sci- entific basis for studying the production potential in irrigated rice with healthy canopy. Method The effects of rice population structure traits under different N rates on rice canopy temperature, relative humidity （ RH）, light transmittance and sheath blight were studied by using Sunscan canopy analysis system and HOBO（ Pro Temp/RH IS logger）. Result The results showed that leaf area index, plant height and tiller number had significant effects on canopy cooling, RH enhancing and light reducing. Extremely significant multiple linear regression relationships existed among canopy day temperature, day RH, LAI and tiller number, and among light transmittance, tiller number and plant height. At flowering stage, per unit LAI could result in a day-maximum-temperature （Tmax） deceasing of 0.87℃ and a day-minimum-RH （RHmin） enhancing of 2.5% within canopy. Similarly, 100 plants per ms could respectively cause a Tmax deceasing of 1.23℃ and an RHmin enhancing of 3.3% in rice canopy. And per 10 cm plant height and 100 plants per m^2 could respectively reduce 9.3% and 7.8% of light in canopy. Conclusion Sheath blight disease index was significantly enhanced as the canopy day temperature decreased, day RH increased and light transmittance reduced. Bigger canopy from higher nitrogen level treatment leads to a more stable canopy microclimate with little changes in temperature and RH during day and night, which has the risk of worsening canopy health. Thus, moderately controlling the space development of canopy is the basis of constructing healthy canopy in rice.

Near-surface velocity model construction based on a Monte-Carlo scheme

In tomographic statics seismic data processing, it 1s crucial to cletermme an optimum base for a near-surface model. In this paper, we consider near-surface model base determination as a global optimum problem. Given information from uphole shooting and the first-arrival times from a surface seismic survey, we present a near-surface velocity model construction method based on a Monte-Carlo sampling scheme using a layered equivalent medium assumption. Compared with traditional least-squares first-arrival tomography, this scheme can delineate a clearer, weathering-layer base, resulting in a better implementation of damming correction. Examples using synthetic and field data are used to demonstrate the effectiveness of the proposed scheme.

Biological Basis & Microclimate Effects of Intercropping in Jujube Field

Objective] This study aimed to explore the biological basis and microcli-mate effects in intercropping jujube orchard. [Method] From 2009 to 2011, jujube was intercroped with wheat, peanut, soybean, garlic, watermelon, vegetables etc. By fixed observation and simultaneous mobile observation, the field microclimate factors such as the air temperature, surface temperature, air relative humidity, wind speed, etc. were measured, with mono-crop farmland as the control. [Result] The competi-tion relationship existed between jujube trees and the intercropped plants for re-sources such as il umination, fertilizer, and water; however there were differences in phenological phases and the critical periods in needing for water, fertilizer and il u-mination between jujube and intercropped plants. Meanwhile, there was significant difference （P〈0.05） in the variation of agricultural microclimate environment in jujube field compared with that in control farmland. Compared with the control, the air tem-perature in intercropping jujube orchard was reduced by 0.2 to 0.7 ℃, the earth surface temperature reduction ranged from 2.1 to 2.5 ℃, the relative air humidity increased by 3.7% to 6.8% and the wind speed decreased by 0.2 to 0.4 m/s. [Conclusion] Al above results showed that intercropping in jujube orchard could be promoted in central China and northern China areas.

Microclimate regimes following gap formation in a montane secondary forest of eastern Liaoning Province, China

In order to improve the understanding of the role of a canopy opening/gap on the physical environments in a secondary forest in Northeastern China, a case study was conducted in and around a small irregular gap in a montane secondary forest. The secondary forest, which was severely disturbed by human beings about 50 years ago, was dominated by Quercus mongolica and Fraxinus rhynchophyllaan. Temporal variation in photosynthetic photon flux density （PPFD）, air temperature （TA） at 10 cm above the ground, soil temperature （Ts） and soil water content （SWC） at top-layer （0-15 cm） and sub-layer （15-30 cm） were measured from May to September after the second year since the formation of the small gap （the ratios of gap diameter to stand height were less than 0.5） in 2006 respectively. Results indicated that the highest value of PPFD occurred at the northern edge of the gap, particularly at the beginning of the growing season in May. On sunny days, the highest value of PPFD appeared earlier than that on overcast days. Maximum and mean values of TAwere higher in the northern part of the gap, and the minimum values of TAwere at the southern edge of the gap. Soil temperature varied obviously in the gap with the range from 1 to 8 ℃. Maximum values of Ts occurred at the northern part of the gap, which was significantly correlated with the maximum values of TA （R = 0.735, P〈0.05）. SWC was higher in the top-layer （0-15 cm） than that in sub-layer （15-30 cm）, but the difference of them was not significant （p〉0.05）, which might be attributed to the small gap size and the effects of aboveground vegetations. From these results, the maximum of PPFD in the study area occurred at the northern part of the gap, which was consistent with the results observed in north hemisphere, but the occurrence time varied with the differences of the latitudes. The highest values of air and soil temperatures also occurred in the northern part of the gap because they were affected by the radiation. However, the variation of temperature in July was different from other months due to the influence of gap size. And the values of soil water content were neither higher in the gap in the wet season nor lower in the dry season, which might be affected by the gap size and topography the gap located. The variations of light, soil and air temperatures, and soil moisture in this small irregular gap might be related to the effects of the micro-site, which affects the regeneration of plant species.

CFD Based Study of Heterogeneous Microclimate in a Typical Chinese Greenhouse in Central China

Indoor microclimate is important for crop production and quality in greenhouse cultivation. This paper focuses on microclimate study based on a computational fluid dynamics （CFD） model of a typical plastic greenhouse （with a sector shape vertical cross-section） popularly used in central China. A radiation model is added into the CFD model so as to simulate coupling of convective transfers and radiative exchanges at the cover and the roof, instead of using the usual coupling approach based on energy balance. In addition, a fractal permeability model is innovatively adopted in the modeling of the crop canopy. Compared the numerical results with measured experimental data, the model simulation is proved with success. This model then is used to explore the microclimate variable distributions in the greenhouse. It shows that the airflow pattern, temperature and humidity profiles are different from those in a sawtooth Mediterranean- type greenhouse. The study suggests that this deliberately developed CFD model can be served as a useful tool in macroclimate research and greenhouse design investigating.

Bearing splitting and near-surface source ranging in the direct zone of deep water

Sound multipath propagation is very important for target localization and identification in different acoustical zones of deep water. In order to distinguish the multipath characteristics in deep water, the Northwest Pacific Acoustic Experiment was conducted in 2015. A low-frequency horizontal line array towed at the depth of around 150 m on a receiving ship was used to receive the noise radiated by the source ship. During this experiment, a beating-splitting phenomenon in the direct zone was observed through conventional beamforming of the horizontal line array within the frequency band 160 Hz- 360 Hz. In this paper, this phenomenon is explained based on ray theory. In principle, the received signal in the direct zone of deep water arrives from two general paths including a direct one and bottom bounced one, which vary considerably in arrival angles. The split bearings correspond to the contributions of these two paths. The beating-splitting phenomenon is demonstrated by numerical simulations of the bearing-time records and experimental results, and they are well consistent with each other. Then a near-surface source ranging approach based on the arrival angles of direct path and bottom bounced path in the direct zone is presented as an application of bearing splitting and is verified by experimental results. Finally, the applicability of the proposed ranging approach for an underwater source within several hundred meters in depth in the direct zone is also analyzed and demonstrated by simulations.

Improvement of Outdoor Microclimate Comfort of Rural Residence in Southwest Mountainous Area through Plant Application

Improvement of microclimate comfort is good to save energy,and create and improve communication space,and promote sustainable development of countryside.Wind is an important factor that influences outdoor microclimate and plant is an economic,high-efficiency and healthy choice to improve wind environment.This article discussed technical strategies of improving the microclimate comfort of rural residence in southwest mountainous areas,by taking use of native vegetations.The strategy is to set up the wind-guide or wind-break plant landscape system through site planting,courtyard planting and residence planting.

VALIDATION OF NEAR-SURFACE WINDS OBTAINED BY A HYBRID WRF/CALMET MODELING SYSTEM OVER A COASTAL ISLAND WITH COMPLEX TERRAIN

The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(California Meteorological Model,CALMET) with 100-m horizontal spacing was driven with outputs from the Weather Research and Forecasting(WRF) model to obtain near-surface winds for the 1-year period from 12 September 2003 to 11 September 2004.Results were compared with wind observations at four sites.Traditional statistical scores,including correlation coefficients,standard deviations(SDs) and mean absolute errors(MAEs),indicate that the wind estimates from the WRF/CALMET modeling system are produced reasonably well.The correlation coefficients are relatively large,ranging from 0.5 to 0.7 for the zonal wind component and from 0.75 to 0.85 for the meridional wind component.MAEs for wind speed range from 1.5 to 2.0 m s-1 at 10 meters above ground level(AGL) and from 2.0 to 2.5 m s-1 at 60 m AGL.MAEs for wind direction range from 30 to 40 degrees at both levels.A spectral decomposition of the time series of wind speed shows positive impacts of CALMET in improving the mesoscale winds.Moreover,combining the CALMET model with WRF significantly improves the spatial variability of the simulated wind fields.It can be concluded that the WRF/CALMET modeling system is capable of providing a detailed near-surface wind field,but the physics in the diagnostic CALMET model needs to be further improved.

Near-surface absorption compensation technology and its application in the Daqing Oilfields

High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. In this paper, first, based on Wiener filter theory, inverse filter calculations for near-surface absorption attenuation compensation were accomplished by analysis of the direct wave spectral components from different distances near the surface. The direct waves were generated by detonators in uphole shots and were acquired by receivers on the surface. The spatially varying inverse filters were designed to compensate for the frequency attenuation of 3D pre-stack CRG （common receiver-gather） data. After applying the filter to CRG data, the high frequency components were compensated with the low frequencies maintained. The seismic resolution and S/N ratio are enhanced and match better with synthetic seismograms and better meet the needs of geological interpretation.

A Havelock Source Panel Method for Near-surface Submarines

A panel method is described for calculating potential flow around near-surface submarines. The method uses Havelock sources which automatically satisfy the linearized free-surface boundary condition. Outputs from the method include pressure field, pressure drag, wave resistance, vertical force, trim moment and wave pattern. Comparisons are made with model tests for wave resistance of Series 58 and DARPA SUBOFF hulls, as well as with wave resistance, lift force and trim moment of three length-to-diameter variants of the DSTO Joubert submarine hull. It is found that the Havelock source panel method is capable of determining with reasonable accuracy wave resistance, vertical force and trim moment for submarine hulls. Further experimental data are required in order to assess the accuracy of the method for pressure field and wave pattern prediction. The method is implemented in the computer code“HullWave”and offers potential advantages over RANS-CFD codes in terms of speed, simplicity and robustness.

Quasi-plane-hypothesis of strain coordination for RC beams seismically strengthened with externally-bonded or near-surface mounted fiber reinforced plastic

The application of fiber reinforced plastic（FRP）,including carbon FRP and glass FRP,for structural repair and strengthening has grown due to their numerous advantages over conventional materials such as externally bonded reinforcement（EBR） and near-surface mounted（NSM） strengthening techniques.This paper summarizes the results from 21 reinforced concrete beams strengthened with different methods,including externally-bonded and near-surface mounted FRP,to study the strain coordination of the FRP and steel rebar of the RC beam.Since there is relative slipping between the RC beam and the FRP,the strain of the FRP and steel rebar of the RC beam satisfy the quasi-plane-hypothesis;that is,the strain of the longitudinal fiber that parallels the neutral axis of the plated beam within the scope of the effective height（h 0） of the cross section is in direct proportion to the distance from the fiber to the neutral axis.The strain of the FRP and steel rebar satisfies the equation：ε FRP =βε steel,and the value of β is equal to 1.1-1.3 according to the test results.

Optimization of rhizosphere cooling airflow for microclimate regulation and its effects on lettuce growth in plant factory

In plant factories,the plant microclimate is affected by the control system,plant physiological activities and aerodynamic characteristics of leaves,which often leads to poor ventilation uniformity,suboptimal environmental conditions and inefficient air conditioning.In this study,interlayer cool airflow(ILCA)was used to introduce room air into plants’internal canopy through vent holes in cultivation boards and air layer between cultivation boards and nutrient solution surface(interlayer).By using optimal operating parameters at a room temperature of 28℃,the ILCA system achieved similar cooling effects in the absence of a conventional air conditioning system and achieved an energy saving of 50.8% while bringing about positive microclimate change in the interlayer and nutrient solution.This resulted in significantly reduced root growth by 41.7% without a negative influence on lettuce crop yield.Future development in this precise microclimate control method is predicted to replace the conventional cooling(air conditioning)systems for crop production in plant factories.

Microclimate Regulation of Urban Road Landscapes and PM 2.5 Control Measures

This paper proposed through systematic analysis that road tail gas is an important source of PM2.5,and elaborated the infl uence of urban road space forms and road landscapes on urban microclimate,on the basis of which gave corresponding landscape design suggestions for PM2.5 control.

Improved seismoacoustic analysis model and its application to source parameter inversion of near-surface small-yield chemical explosions

The seismoacoustic analysis method has broad potential applications to source parameter estimation for near-surface explosion events such as industrial explosions and terrorist attacks.In this study,current models were improved by modifying the acoustic model and adopting the Bayesian Markov-chain-Monte-Carlo inversion method.The source parameters of near-surface small-yield chemical explosions were analyzed via the improved seismoacoustic analysis model and by the estimation accuracy of seismoacoustic joint inversion.Estimation and analysis results showed that the improved seismoacoustic analysis model considered ground shock coupling and the impact of explosion products ejecting from the surface so that the improved acoustic impulse relation was more consistent with the measured data than the Ford impulse relation.It is suitable for deep-burial,shallow-burial,and near-surface aerial explosions.Furthermore,trade-off relationships were declined through the application of the improved model to source parameter inversion for near-surface small-yield chemical explosions,and source parameter estimation accuracy was improved.

Active source seismic imaging on near-surface granite body:case study of siting a geological disposal repository for high-level radioactive nuclear waste

In order to research whether it is suitable to set a geological disposal repository for high-level radioactive nuclear waste into one target granite body,two active source seismic profles were arranged near a small town named Tamusu,Western China.The study area is with complex surface conditions,thus the seismic exploration encountered a variettraveltimey of technical difculties such as crossing obstacles,de-noising harmful scattered waves,and building complex near-surface velocity models.In order to address those problems,techniques including cross-obstacle seismic geometry design,angle-domain harmful scattered noise removal,and an acoustic wave equation-based inversion method jointly utilizing both the and waveform of frst arrival waves were adopted.The fnal seismic images clearly exhibit the target rock’s unconformable contact boundary and its top interface beneath the sedimentary and weathered layers.On this basis,it could be confrmed that the target rock is not thin or has been transported by geological process from somewhere else,but a native and massive rock.There are a few small size fractures whose space distribution could be revealed by seismic images within the rock.The fractures should be kept away.Based on current research,it could be considered that active source seismic exploration is demanded during the sitting process of the geological disposal repository for nuclear waste.The seismic acquisition and processing techniques proposed in the present paper would ofer a good reference value for similar researches in the future.

Double linear strain distribution assumption of RC beam strengthened with external-bonded or near-surface mounted fiber reinforced plastic

Rehabilitation of existing structures with fiber reinforced plastic(FRP)has been growing in popularity because they offer superior performance in terms of resistance to corrosion and high specific stiffness.The strain coordination results of 34 reinforced concrete beams(four groups)strengthened with different methods were presented including external-bonded or near-surface mounted glass or carbon FRP or helical rib bar in order to study the strain coordination of the strengthening materials and steel rebar of RC beam.Because there is relative slipping between concrete and strengthening materials(SM),the strain of SM and steel rebar of RC beam satisfies the double linear strain distribution assumption,that is,the strain of longitudinal fiber parallel to the neutral axis of plated beam within the scope of effective height(h0)of the cross section is in direct proportion to the distance from the fiber to the neutral axis.The strain of SM and steel rebar satisfies the equation εGCH=βεsteel,where the value of β is equal to 1.1-1.3 according to the test results.