3D fluid model analysis on the generation of negative hydrogen ions for negative ion source of NBI

A radio-frequency(RF) inductively coupled negative hydrogen ion source(NHIS) has been adopted in the China Fusion Engineering Test Reactor(CFETR) to generate negative hydrogen ions.By incorporating the level-lumping method into a three-dimensional fluid model,the volume production and transportation of H^(-) in the NHIS,which consists of a cylindrical driver region and a rectangular expansion chamber,are investigated self-consistently at a large input power(40 k W) and different pressures(0.3–2.0 Pa).The results indicate that with the increase of pressure,the H^(-) density at the bottom of the expansion region first increases and then decreases.In addition,the effect of the magnetic filter is examined.It is noteworthy that a significant increase in the H^(-) density is observed when the magnetic filter is introduced.As the permanent magnets move towards the driver region,the H^(-) density decreases monotonically and the asymmetry is enhanced.This study contributes to the understanding of H-distribution under various conditions and facilitates the optimization of volume production of negative hydrogen ions in the NHIS.

Numerical investigation of radio-frequency negative hydrogen ion sources by a three-dimensional fluid model

A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber,for neutral beam injection system in CFETR.In this model,the electron effective collision frequency and the ion mobility at high E-fields are employed,for accurate simulation of discharges at low pressures(0.3 Pa-2 Pa)and high powers(40 kW-100 kW).The results indicate that when the high E-field ion mobility is taken into account,the electron density is about four times higher than the value in the low E-field case.In addition,the influences of the magnetic field,pressure and power on the electron density and electron temperature are demonstrated.It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances.However,the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not.Besides,the maximum of the electron density first increases and then decreases with magnetic field,while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant.As the pressure increases from 0.3 Pa to 2 Pa,the electron density becomes higher,with the maximum moving upwards to the driver region,and the symmetry of the electron temperature in the xz-plane becomes much better.As power increases,the electron density rises,whereas the spatial distribution is similar.It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters,while the power only has little effect.

Influence of magnetic filter field on the radio-frequency negative hydrogen ion source of neutral beam injector for China Fusion Engineering Test Reactor

In the design of negative hydrogen ion sources,a magnetic filter field of tens of Gauss at the expansion region is essential to reduce the electron temperature,which usually results in a magnetic field of around 10 Gauss in the driver region,destabilizing the discharge.The magnetic shield technique is proposed in this work to reduce the magnetic field in the driver region and improve the discharge characteristics.In this paper,a three-dimensional fluid model is developed within COMSOL to study the influence of the magnetic shield on the generation and transport of plasmas in the negative hydrogen ion source.It is found that when the magnetic shield material is applied at the interface of the expansion region and the driver region,the electron density can be effectively increased.For instance,the maximum of the electron density is 6.7×10^(17)m^(-3)in the case without the magnetic shield,and the value increases to 9.4×10^(17)m^(-3)when the magnetic shield is introduced.

Particle-in-Cell with Monte CarloCollisions Gun Code Simulations of a Surface-Conversion H^(−)Ion Source

We present an extended update on the status of a particle-in-cellwithMonte Carlo collisions(PIC-MCC)gun code developed at LosAlamos for the study of surfaceconverter H−ion sources.The programis fully kinetic.Some of the program’s features include:solution of arbitrary electrostatic and magnetostatic fields in an axisymmetric(r,z)geometry to describe the self-consistent time evolution of a plasma;simulation of a multi-species(e^(−),H^(+),H^(+)_(2),H^(+)_(3),H^(−))plasma discharge from a neutral hydrogen gas and filament-originated seed electrons;full 2-dimensional(r,z)3-velocity(v_(r),v_(z),vφ)dynamics for all species;detailed collision physics between charged particles and neutrals and the ability to represent multiple smooth(not stair-stepped)electrodes of arbitrary shape and voltage whose surfaces may be secondary-particle emitters(H^(−)and e^(−)).The status of this development is discussed in terms of its physics content and current implementation details.