Negative Poisson’s ratio(NPR)metamaterials are attractive for their unique mechanical behaviors and potential applications in deformation control and energy absorption.However,when subjected to significant stretching...Negative Poisson’s ratio(NPR)metamaterials are attractive for their unique mechanical behaviors and potential applications in deformation control and energy absorption.However,when subjected to significant stretching,NPR metamaterials designed under small strain assumption may experience a rapid degradation in NPR performance.To address this issue,this study aims to design metamaterials maintaining a targeted NPR under large deformation by taking advantage of the geometry nonlinearity mechanism.A representative periodic unit cell is modeled considering geometry nonlinearity,and its topology is designed using a gradient-free method.The unit cell microstructural topologies are described with the material-field series-expansion(MFSE)method.The MFSE method assumes spatial correlation of the material distribution,which greatly reduces the number of required design variables.To conveniently design metamaterials with desired NPR under large deformation,we propose a two-stage gradient-free metamaterial topology optimization method,which fully takes advantage of the dimension reduction benefits of the MFSE method and the Kriging surrogate model technique.Initially,we use homogenization to find a preliminary NPR design under a small deformation assumption.In the second stage,we begin with this preliminary design and minimize deviations in NPR from a targeted value under large deformation.Using this strategy and solution technique,we successfully obtain a group of NPR metamaterials that can sustain different desired NPRs in the range of[−0.8,−0.1]under uniaxial stretching up to 20% strain.Furthermore,typical microstructure designs are fabricated and tested through experiments.The experimental results show good consistency with our numerical results,demonstrating the effectiveness of the present gradientfree NPR metamaterial design strategy.展开更多
Battery safety has attracted considerable attention worldwide due to the rapid development of wearable electronics and the steady increase in the production and use of electric vehicles.As battery failures are often a...Battery safety has attracted considerable attention worldwide due to the rapid development of wearable electronics and the steady increase in the production and use of electric vehicles.As battery failures are often associated with mechanical-thermal coupled behaviors,protective shielding materials with excellent mechanical robustness and flame-retardant properties are highly desired to mitigate thermal runaway.However,most of the thermal insulating materials are not strong enough to protect batteries from mechanical abuse,which is one of the most critical scenarios with catastrophic consequences.Here,inspired by wood,we have developed an effective approach to engineer a hierarchical nanocomposite via self-assembly of calcium silicate hydrate and polyvinyl alcohol polymer chains(referred as CSH wood).The versatile protective material CSH wood demonstrates an unprecedented combination of light weight(0.018 g cm-3),high stiffness(204 MPa in the axial direction),negative Poisson's ratio(-0.15),remarkable toughness(6.67×105 J m-3),superior thermal insulation(0.0204 W m-1 K-1 in the radial direction),and excellent fire retardancy(UL94-V0).When applied as a protective cover or a protective layer within battery packages,the tough CSH wood can resist high-impact load and block heat diffusion to block or delay the spread of fire,therefore significantly reducing the risk of property damage or bodily injuries caused by battery explosions.This work provides new pathways for fabricating advanced thermal insulating materials with large scalability and demonstrates great potential for the protection of electronic devices.展开更多
This paper proposes a three-dimensional(3D)Maltese cross metamaterial with negative Poisson’s ratio(NPR)and negative thermal expansion(NTE)adopted as the core layers in sandwich plates,and aims to explore the relatio...This paper proposes a three-dimensional(3D)Maltese cross metamaterial with negative Poisson’s ratio(NPR)and negative thermal expansion(NTE)adopted as the core layers in sandwich plates,and aims to explore the relations between the mechanical responses of sandwich composites and the NPR or NTE of the metamaterial.First,the NPR and NTE of the metamaterial are derived analytically based on energy conservation.The effective elastic modulus and mass density of the 3D metamaterial are obtained and validated by the finite element method(FEM).Subsequently,the general governing equation of the 3D sandwich plate under thermal environments is established based on Hamilton’s principle with the consideration of the von Kármán nonlinearity.The differential quadrature(DQ)FEM(DQFEM)is utilized to obtain the numerical solutions.It is shown that NPR and NTE can enhance the global stiffness of sandwich structures.The geometric parameters of the Maltese cross metamaterial significantly affect the responses of the thermal stress,natural frequency,and critical buckling load.展开更多
Two-dimensional(2D)antiferroelectric materials have raised great research interest over the last decade.Here,we reveal a type of 2D antiferroelectric(AFE)crystal where the AFE polarization direction can be switched by...Two-dimensional(2D)antiferroelectric materials have raised great research interest over the last decade.Here,we reveal a type of 2D antiferroelectric(AFE)crystal where the AFE polarization direction can be switched by a certain degree in the 2D plane.Such 2D functional materials are realized by stacking the exfoliated wurtzite(wz)monolayers with“self-healable”nature,which host strongly coupled ferroelasticity/antiferroelectricity and benign stability.The AFE candidates,i.e.,Zn X and Cd X(X=S,Se,Te),are all semiconductors with direct bandgap atΓpoint,which harbors switchable antiferroelectricity and ferroelasticity with low transition barriers,hidden spin polarization,as well as giant in-plane negative Poisson's ratio(NPR),enabling the co-tunability of hidden spin characteristics and auxetic magnitudes via AFE switching.The 2D AFE wz crystals provide a platform to probe the interplay of 2D antiferroelectricity,ferroelasticity,NPR,and spin effects,shedding new light on the rich physics and device design in wz semiconductors.展开更多
In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult....In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult.Unfortunately,there are few studies on the failure and support mechanism of the surrounding rocks in the excavation of supported tunnel,while most model tests of super-large-span tunnels focus on the failure characteristics of surrounding rocks in tunnel excavation without supports.Based on excavation compensation method(ECM),model tests of a super-large-span tunnel excavation by different anchor cable support methods in the initial support stage were carried out.The results indicate that during excavation of super-large-span tunnel,the stress and displacement of the shallow surrounding rocks decrease,following a step-shape pattern,and the tunnel failure is mainly concentrated on the vault and spandrel areas.Compared with conventional anchor cable supports,the NPR(negative Poisson’s ratio)anchor cable support is more suitable for the initial support stage of the super-large-span tunnels.The tunnel support theory,model test materials,methods,and the results obtained in this study could provide references for study of similar super-large-span tunnels。展开更多
Materials with a negative Poisson’s ratio effect perform significantly better than traditional materials for rock mass impact resistance,shear resistance,and energy absorption.Based on these advantages,a negative Poi...Materials with a negative Poisson’s ratio effect perform significantly better than traditional materials for rock mass impact resistance,shear resistance,and energy absorption.Based on these advantages,a negative Poisson’s ratio anchor cable(NPR anchor cable)with high elongation and constant resistance was developed and successfully applied in the field of mine disaster control.However,theoretical and experimental research on the negative Poisson’s ratio effect and peripheral strain characteristics of NPR anchor cables is currently incomplete.This study used several theories and methods,such as static tensile,peripheral strain measurement,and static negative Poisson’s ratio measurement,to investigate the radial deformation law of an NPR anchor cable and the negative Poisson’s ratio characteristics.Experimental results elucidated constant resistance changes in an NPR anchor cable during operation,the motion of the constant resistance body in the constant resistance sleeve,and the deformation law of the constant resistance sleeve.Negative Poisson’s ratio characteristics of the NPR anchor cable and its superior energy absorption characteristics were verified and it provided a theoretical and experimental basis for energy absorption mechanisms of an NPR anchor cable.展开更多
The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling lar...The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.展开更多
A negative Poisson's ratio(NPR)structure represents optimal impact-resistance with applications in various fields,including the crash box in vehicles,which absorbs impact kinetic energy.The crash box is designed t...A negative Poisson's ratio(NPR)structure represents optimal impact-resistance with applications in various fields,including the crash box in vehicles,which absorbs impact kinetic energy.The crash box is designed to deform in response to impact,increasing local structural density,which enhances impact resistance performance.Current studies have only focused on the NPR effect in the plane dimension at low-speed loads.Few studies have considered high-speed impact loads on three-dimensional NPR structures.We have developed two types of AlSi10Mg alloy energy-absorbing structures with NPR using three-dimensional printing technology,and have compared our systems with a conventional hexagonal mesh structure.Sample testing involved split-Hopkinson pressure bar measurements,which showed good agreement with dynamic numerical simulations.When subjected to an impact load,the NPR structure exhibited better impact resistance and energy absorption compared with the positive Poisson's ratio structure.The proposed dual-layer hexagonal structure ensures an NPR effect while exhibiting higher strength and improved stability relative to the conventional concave hexagon structure.展开更多
This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certai...This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certain megnitude are mainly positive ones a certain time before the main shock in or near the focal regions of most strong quakes,and form a concentratingintervals of positive quakes,The main quakes generally locate in or near the areas of positive quake distribution.Negative quakes often occur several months before the main shocks (not excluding positive ones), with the decrease of LURR (Loading/Unloading Response Ratio) values.It possibly shows that earthquake generating process has come to a short term stage.These characteristics may help to predict the time and location of the future earthquakes,and have been applied to the preliminary prediction of the time and the location of the earthquake of M =6.6 on Sep.11,1996 in Kanto area.展开更多
Quasi-NPR(negative Poisson’s ratio)steel is a new type of super bolt material with high strength,high ductility,and a micro-negative Poisson’s effect.This material overcomes the contrasting characteristics of the hi...Quasi-NPR(negative Poisson’s ratio)steel is a new type of super bolt material with high strength,high ductility,and a micro-negative Poisson’s effect.This material overcomes the contrasting characteristics of the high strength and high ductility of steel and it has significant energy-absorbing characteristics,which is of high value in deep rock and soil support engineering.However,research on the shear resistance of quasi-NPR steel has not been carried out.To study the shear performance of quasi-NPR steel bolted rock joints,indoor shear tests of bolted rock joints under different normal stress conditions were carried out.Q235 steel and#45 steel,two representative ordinary bolt steels,were set up as a control group for comparative tests to compare and analyze the shear strength,deformation and instability mode,shear energy absorption characteristics,and bolting contribution of different types of bolts.The results show that the jointed rock masses without bolt reinforcement undergo brittle failure under shear load,while the bolted jointed rock masses show obvious ductile failure characteristics.The shear deformation ca-pacity of quasi-NPR steel is more than 3.5 times that of Q235 steel and#45 steel.No fracture occurs in the quasi-NPR steel during large shear deformation and it can provide stable shear resistance.However,the other two types of control bolts become fractured under the same conditions.Quasi-NPR steel has significant energy-absorbing characteristics under shear load and has obvious advantages in terms of absorbing the energy released by shear deformation of jointed rock masses as compared with ordinary steel.In particular,the shear force plays a major role in resisting the shear deformation of Q235 steel and#45 steel,therefore,fracture failure occurs under small bolt deformation.However,the axial force of quasi-NPR steel can be fully exerted when resisting joint shear deformation;the steel itself does not break when large shear deformation occurs,and the supporting effect of the jointed rock mass is effectively guaranteed.展开更多
With the gradual decrease and exhaustion of shallow mineral resources,underground mining has progressed to greater depths.Here,the geological environment is significantly more complex and nonlinear,and large deformati...With the gradual decrease and exhaustion of shallow mineral resources,underground mining has progressed to greater depths.Here,the geological environment is significantly more complex and nonlinear,and large deformations of rock masses have great potential to occur.Many geotechnical engineering disasters have occurred even while using Poisson’s ratio(PR)anchor cable supports.To efficiently deal with these issues,a new support material called negative Poisson’s ratio(NPR)anchor cable is proposed;this material can withstand large deformations and provide high constant resistance.In this study,the support characteristics of macro-NPR anchor cable under blasting impact were mainly studied.The support effects of PR anchor cable and macro-NPR anchor cable were compared and analyzed with the help of field experiments and numerical simulations.The results indicate that field experiments and discontinuous deformation analysis accurately reflect the failure state of the selected roadway,as well as the tension and deformation of the anchor cables.The road-way supported by PR anchor cables cannot resist rock bursts under ordinary circumstances.However,the NPR anchor cable-supported roadway resisted a rock burst caused by the impact equivalent to a mine earthquake magnitude above 3;it meets the requirements of roadway stability.展开更多
High-speed impact threats and terrorist actions on the battlefield require the development of more effective protective materials and structures,and various protective structure is designed according their energy-abso...High-speed impact threats and terrorist actions on the battlefield require the development of more effective protective materials and structures,and various protective structure is designed according their energy-absorbing characteristics.In this research,the deformation behavior,microscopic failure modes and energy absorption characteristics of re-entrant hexagonal structure,regular hexagonal structure and regular quadrilateral structure are studied under different strain rates impact.The re-entrant hexagonal structure forms a“X”-shaped deformation zone,the regular quadrilateral and regular hexagonal structure form an“I”-shaped deformation zone.The microscopic appearance of the section is a mixed fracture form.The effects of the topological shape,cell angle,and cell height on the impact behavior of the structure were evaluated.When the cell height is fixed and the cell angle is changed,the energy absorption of the structure increase and then decrease as the relative density increase.The mechanical properties of the structure are optimal when the relative density is about 18.6%and the cell angle is22.5°.When the cell angle is fixed and the cell height is changed,as the relative density increases,the energy absorption of the structure gradually increases.The regular quadrilateral structure and the reentrant hexagonal structure experienced clear strain rate effects under dynamic impact conditions;the regular hexagonal structure did not exhibit obvious strain rate effects.The results presented herein provide a basis for further rational design and selection of shock-resistant protective structures that perform well in high-speed impact environments.展开更多
The torsional,bending and tensile mechanical properties of Mo_(6)S_(6)nanowire are examined by molecular dynamics(MD)simulations with a first-principles-based reactive force field(ReaxFF).It is found that Mo_(6)S_(6)n...The torsional,bending and tensile mechanical properties of Mo_(6)S_(6)nanowire are examined by molecular dynamics(MD)simulations with a first-principles-based reactive force field(ReaxFF).It is found that Mo_(6)S_(6)nanowire shows unique mechanical properties such as high torsional and bending flexibility,high Young's modulus and strength,and negative Poisson's ratio.The Mo_(6)S_(6)nanowire can be strengthened or weakened via twisting,depending on the twist angle.The Mo_(6)S_(6)nanowire with a slight twist angle shows brittle failure,whereas it with a large twist angle exhibits ductile failure and necking behavior.Twisted Mo_(6)S_(6)nanowires show a crossover in the negative Poisson's ratio at critical strains,that is,Poisson's ratio first decreases but then increases,with a minimum value down to around-0.8 at the strain of 0.01 as the twist angle is 21.0°/nm.The negative Poisson's ratio and the crossover are explained by the bond transform that makes zero angles to the wire cross-section.展开更多
Materials exhibiting auxetic properties have a negative Poisson’s ratio, which intrigued researchers to understand the behavior of auxetic structure. Several researchers focused on the different auxetic cell designs,...Materials exhibiting auxetic properties have a negative Poisson’s ratio, which intrigued researchers to understand the behavior of auxetic structure. Several researchers focused on the different auxetic cell designs, while others focused on the auxetic applications. With the advance of additive manufacturing methods, computer-aided design and finite element analysis in recent decades, auxetics have been explored. One of the interesting applications is in the field of biomedical devices or implants, especially for certain natural biomedical organs such as tissues, certain ligaments that have auxetic properties. This paper is an overview of auxetic design approaches and biomedical applications.展开更多
Focusing on the structural optimization of auxetic materials using data-driven methods,a back-propagation neural network(BPNN)based design framework is developed for petal-shaped auxetics using isogeometric analysis.A...Focusing on the structural optimization of auxetic materials using data-driven methods,a back-propagation neural network(BPNN)based design framework is developed for petal-shaped auxetics using isogeometric analysis.Adopting a NURBSbased parametric modelling scheme with a small number of design variables,the highly nonlinear relation between the input geometry variables and the effective material properties is obtained using BPNN-based fitting method,and demonstrated in this work to give high accuracy and efficiency.Such BPNN-based fitting functions also enable an easy analytical sensitivity analysis,in contrast to the generally complex procedures of typical shape and size sensitivity approaches.展开更多
Yarn sensors have shown promising application prospects in wearable electronics owing to their shape adaptability, good flexibility, and weavability. However, it is still a critical challenge to develop simultaneously...Yarn sensors have shown promising application prospects in wearable electronics owing to their shape adaptability, good flexibility, and weavability. However, it is still a critical challenge to develop simultaneously structure stable, fast response, body conformal, mechanical robust yarn sensor using full microfibers in an industrial-scalable manner. Herein, a full-fiber auxetic-interlaced yarn sensor(AIYS) with negative Poisson’s ratio is designed and fabricated using a continuous, mass-producible, structure-programmable, and low-cost spinning technology. Based on the unique microfiber interlaced architecture, AIYS simultaneously achieves a Poisson’s ratio of-1.5, a robust mechanical property(0.6 c N/dtex), and a fast train-resistance responsiveness(0.025 s), which enhances conformality with the human body and quickly transduce human joint bending and/or stretching into electrical signals. Moreover, AIYS shows good flexibility, washability, weavability, and high repeatability. Furtherly, with the AIYS array, an ultrafast full-letter sign-language translation glove is developed using artificial neural network. The sign-language translation glove achieves an accuracy of 99.8% for all letters of the English alphabet within a short time of 0.25 s. Furthermore, owing to excellent full letter-recognition ability, real-time translation of daily dialogues and complex sentences is also demonstrated. The smart glove exhibits a remarkable potential in eliminating the communication barriers between signers and non-signers.展开更多
Irregular honeycomb structures occur abundantly in nature and in man-made products,and are an active area of research.In this paper,according to the optimization of regular honeycomb structures,two types of irregular ...Irregular honeycomb structures occur abundantly in nature and in man-made products,and are an active area of research.In this paper,according to the optimization of regular honeycomb structures,two types of irregular honeycomb structures with both positive and negative Poisson’s ratios are presented.The elastic properties of irregular honeycombs with varying structure angles were investigated through a combination of material mechanics and structural mechanics methods,in which the axial deformation of the rods was considered.The numerical results show that axial deformation has a significant influence on the elastic properties of irregular honeycomb structures.The elastic properties of the structure can be considered by the enclosed area of the unit structure,the shape of the unit structure,and the elastic properties of the original materials.The elastic properties considering the axial deformation of rods studied in this study can provide a reference for other scholars.展开更多
Three new kinds of molecular networks are designed and predicted to exhibit negative Poisson ratios. Molecular mechanics calculations on these networks show that the magnitude of Poisson ratios depends on the relative...Three new kinds of molecular networks are designed and predicted to exhibit negative Poisson ratios. Molecular mechanics calculations on these networks show that the magnitude of Poisson ratios depends on the relative flexibility of beam and arm structures. Several new kinds of auxetic polymers, whose successful synthesis should be easier than that of the corresponding auxetic networks, are then proposed. It is found that the kabob-like polymers with auxegens lying vertically on the main chain can acquire auxeticity while those with auxegens lying horizontally on the main chain cannot. Besides, a half kabob-like or pseudo-ladder polymer with auxegens linked at the intersection of the beam and the arm does show auxeticity when adopting constrictive conformers. It is, however, worthwhile noting that the origins of auxeticity still await and strongly deserve further experimental and theoretical investigations.展开更多
Tracheal stents are an important form of treatment for benign or malignant central airway obstruction.However,the mechanical behavior of current tracheal stents is significantly different from that of the native trach...Tracheal stents are an important form of treatment for benign or malignant central airway obstruction.However,the mechanical behavior of current tracheal stents is significantly different from that of the native trachea,which leads to a variety of serious complications.In this study,inspired by the structure of the native trachea,a wavy non-uniform ligament chiral tracheal stent is proposed,in which J-shaped stress-strain behavior and negative Poisson's ratio response are achieved by replacing the tangential ligament of tetrachiral and anti-tetrachiral hybrid structure with a wavy non-uniform ligament.Through the combination of theoretical analysis,finite element analysis and experimental tests,a wide range of desired J-shaped stress-strain curves are explored to mimic the native porcine trachea by tailoring the stent geometry.Besides,the negative Poisson’s ratio and auxetic diameter curves versus axial strain of the stent are also studied in detail,thus contributing to the enhancement of cross-section ventilation and reducing the migration of the stent.This novel tracheal stent with a unique microstructure shows a potential to perfectly match the physiological activities of the native trachea and thereby reduce potential complications.展开更多
Auxetic material structures exhibit a negative Poisson ratio. The structure expands in the axial and transverse directions under tensile loading and vice versa under compression loading. Many fabricated designs for au...Auxetic material structures exhibit a negative Poisson ratio. The structure expands in the axial and transverse directions under tensile loading and vice versa under compression loading. Many fabricated designs for auxetic materials exist such as re-entrant hexagonal, chiral, and arrowhead geometries. This paper studies the unit cell of the re-entrant hexagonal geometry to understand how changing the internal angle and fillet radius of the structure affects the Poisson’s ratio. The material chosen for this study is acrylonitrile butadiene styrene (ABS) due to its availability and frequent use in additive manufacturing. The study was based on finite element analysis. It is observed that the direction of load applied to the unit cell affects the unit cell strain, Poisson’s ratio, and maximum load capacity before failure responses. It is noticed that the re-entrant cell starts by showing a standard non-auxetic behavior until it reaches a specific axial strain value. A quadratic correlation is identified between axial and transverse strain. Designing an auxetic structure starts with understanding the behavior of a unit cell structure. The auxetic structure design is a complex process that requires a compromise between auxetic property to be achieved and load capacity via avoiding stress concentration zones.展开更多
基金the support of the National Science Foundation of China(12372120,12172075)the Liaoning Revitalization Talents Program(XLYC2007027)Fundamental Research Funds for the Central Universities(DUT21RC(3)067).
文摘Negative Poisson’s ratio(NPR)metamaterials are attractive for their unique mechanical behaviors and potential applications in deformation control and energy absorption.However,when subjected to significant stretching,NPR metamaterials designed under small strain assumption may experience a rapid degradation in NPR performance.To address this issue,this study aims to design metamaterials maintaining a targeted NPR under large deformation by taking advantage of the geometry nonlinearity mechanism.A representative periodic unit cell is modeled considering geometry nonlinearity,and its topology is designed using a gradient-free method.The unit cell microstructural topologies are described with the material-field series-expansion(MFSE)method.The MFSE method assumes spatial correlation of the material distribution,which greatly reduces the number of required design variables.To conveniently design metamaterials with desired NPR under large deformation,we propose a two-stage gradient-free metamaterial topology optimization method,which fully takes advantage of the dimension reduction benefits of the MFSE method and the Kriging surrogate model technique.Initially,we use homogenization to find a preliminary NPR design under a small deformation assumption.In the second stage,we begin with this preliminary design and minimize deviations in NPR from a targeted value under large deformation.Using this strategy and solution technique,we successfully obtain a group of NPR metamaterials that can sustain different desired NPRs in the range of[−0.8,−0.1]under uniaxial stretching up to 20% strain.Furthermore,typical microstructure designs are fabricated and tested through experiments.The experimental results show good consistency with our numerical results,demonstrating the effectiveness of the present gradientfree NPR metamaterial design strategy.
基金the financial support from the National Key Research and Development Program of China(No.2021YFF0500802)the National Natural Science Foundation of China(No.51890904,No.52022022,and No.52278247)the Scientific Research and Innovation Plan of Jiangsu Province(KYCX21_0090)。
文摘Battery safety has attracted considerable attention worldwide due to the rapid development of wearable electronics and the steady increase in the production and use of electric vehicles.As battery failures are often associated with mechanical-thermal coupled behaviors,protective shielding materials with excellent mechanical robustness and flame-retardant properties are highly desired to mitigate thermal runaway.However,most of the thermal insulating materials are not strong enough to protect batteries from mechanical abuse,which is one of the most critical scenarios with catastrophic consequences.Here,inspired by wood,we have developed an effective approach to engineer a hierarchical nanocomposite via self-assembly of calcium silicate hydrate and polyvinyl alcohol polymer chains(referred as CSH wood).The versatile protective material CSH wood demonstrates an unprecedented combination of light weight(0.018 g cm-3),high stiffness(204 MPa in the axial direction),negative Poisson's ratio(-0.15),remarkable toughness(6.67×105 J m-3),superior thermal insulation(0.0204 W m-1 K-1 in the radial direction),and excellent fire retardancy(UL94-V0).When applied as a protective cover or a protective layer within battery packages,the tough CSH wood can resist high-impact load and block heat diffusion to block or delay the spread of fire,therefore significantly reducing the risk of property damage or bodily injuries caused by battery explosions.This work provides new pathways for fabricating advanced thermal insulating materials with large scalability and demonstrates great potential for the protection of electronic devices.
基金Project supported by the National Natural Science Foundation of China(No.11872098)。
文摘This paper proposes a three-dimensional(3D)Maltese cross metamaterial with negative Poisson’s ratio(NPR)and negative thermal expansion(NTE)adopted as the core layers in sandwich plates,and aims to explore the relations between the mechanical responses of sandwich composites and the NPR or NTE of the metamaterial.First,the NPR and NTE of the metamaterial are derived analytically based on energy conservation.The effective elastic modulus and mass density of the 3D metamaterial are obtained and validated by the finite element method(FEM).Subsequently,the general governing equation of the 3D sandwich plate under thermal environments is established based on Hamilton’s principle with the consideration of the von Kármán nonlinearity.The differential quadrature(DQ)FEM(DQFEM)is utilized to obtain the numerical solutions.It is shown that NPR and NTE can enhance the global stiffness of sandwich structures.The geometric parameters of the Maltese cross metamaterial significantly affect the responses of the thermal stress,natural frequency,and critical buckling load.
基金supported by Natural Science Foundation of Guangdong Province,China (Grant Nos.2022A1515011990 and 2023A1515030086)National Natural Science Foundation of China (Grant Nos.11774239,11804230 and 61827815)+2 种基金National Key R&D Program of China (Grant No.2019YFB2204500)Shenzhen Science and Technology Innovation Commission (Grant Nos.JCYJ20220531102601004,KQTD20180412181422399 and JCYJ20180507181858539)High-Level University Construction Funds of SZU (Grant Nos.860-000002081209 and 860-000002110711)。
文摘Two-dimensional(2D)antiferroelectric materials have raised great research interest over the last decade.Here,we reveal a type of 2D antiferroelectric(AFE)crystal where the AFE polarization direction can be switched by a certain degree in the 2D plane.Such 2D functional materials are realized by stacking the exfoliated wurtzite(wz)monolayers with“self-healable”nature,which host strongly coupled ferroelasticity/antiferroelectricity and benign stability.The AFE candidates,i.e.,Zn X and Cd X(X=S,Se,Te),are all semiconductors with direct bandgap atΓpoint,which harbors switchable antiferroelectricity and ferroelasticity with low transition barriers,hidden spin polarization,as well as giant in-plane negative Poisson's ratio(NPR),enabling the co-tunability of hidden spin characteristics and auxetic magnitudes via AFE switching.The 2D AFE wz crystals provide a platform to probe the interplay of 2D antiferroelectricity,ferroelasticity,NPR,and spin effects,shedding new light on the rich physics and device design in wz semiconductors.
基金supported by the Innovation Fund Research Project of State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology(Grant No.SKLGDUEK202201)the Foundation for the Opening of State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology(Grant No.SKLGDUEK2129)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z020007)。
文摘In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult.Unfortunately,there are few studies on the failure and support mechanism of the surrounding rocks in the excavation of supported tunnel,while most model tests of super-large-span tunnels focus on the failure characteristics of surrounding rocks in tunnel excavation without supports.Based on excavation compensation method(ECM),model tests of a super-large-span tunnel excavation by different anchor cable support methods in the initial support stage were carried out.The results indicate that during excavation of super-large-span tunnel,the stress and displacement of the shallow surrounding rocks decrease,following a step-shape pattern,and the tunnel failure is mainly concentrated on the vault and spandrel areas.Compared with conventional anchor cable supports,the NPR(negative Poisson’s ratio)anchor cable support is more suitable for the initial support stage of the super-large-span tunnels.The tunnel support theory,model test materials,methods,and the results obtained in this study could provide references for study of similar super-large-span tunnels。
基金supported by the National Natural Science Foundation of China(NSFC)(41941018)the Second Tibetan Plateau Scientific Expedition and Research Grant 2019QZKK0708。
文摘Materials with a negative Poisson’s ratio effect perform significantly better than traditional materials for rock mass impact resistance,shear resistance,and energy absorption.Based on these advantages,a negative Poisson’s ratio anchor cable(NPR anchor cable)with high elongation and constant resistance was developed and successfully applied in the field of mine disaster control.However,theoretical and experimental research on the negative Poisson’s ratio effect and peripheral strain characteristics of NPR anchor cables is currently incomplete.This study used several theories and methods,such as static tensile,peripheral strain measurement,and static negative Poisson’s ratio measurement,to investigate the radial deformation law of an NPR anchor cable and the negative Poisson’s ratio characteristics.Experimental results elucidated constant resistance changes in an NPR anchor cable during operation,the motion of the constant resistance body in the constant resistance sleeve,and the deformation law of the constant resistance sleeve.Negative Poisson’s ratio characteristics of the NPR anchor cable and its superior energy absorption characteristics were verified and it provided a theoretical and experimental basis for energy absorption mechanisms of an NPR anchor cable.
基金provided by the National Natural Science Foundation of China(52074300)the Program of China Scholarship Council(202206430024)+2 种基金the National Natural Science Foundation of China Youth Science(52104139)Yueqi Young Scholars Project of China University of Mining and Technology Beijing(2602021RC84)Guizhou province science and technology planning project([2020]3007,[2020]3008)。
文摘The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.
基金This work was funded by the Graduate Innovation Program of China University of Mining and Technology(No.2022WLKXJ053)。
文摘A negative Poisson's ratio(NPR)structure represents optimal impact-resistance with applications in various fields,including the crash box in vehicles,which absorbs impact kinetic energy.The crash box is designed to deform in response to impact,increasing local structural density,which enhances impact resistance performance.Current studies have only focused on the NPR effect in the plane dimension at low-speed loads.Few studies have considered high-speed impact loads on three-dimensional NPR structures.We have developed two types of AlSi10Mg alloy energy-absorbing structures with NPR using three-dimensional printing technology,and have compared our systems with a conventional hexagonal mesh structure.Sample testing involved split-Hopkinson pressure bar measurements,which showed good agreement with dynamic numerical simulations.When subjected to an impact load,the NPR structure exhibited better impact resistance and energy absorption compared with the positive Poisson's ratio structure.The proposed dual-layer hexagonal structure ensures an NPR effect while exhibiting higher strength and improved stability relative to the conventional concave hexagon structure.
文摘This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certain megnitude are mainly positive ones a certain time before the main shock in or near the focal regions of most strong quakes,and form a concentratingintervals of positive quakes,The main quakes generally locate in or near the areas of positive quake distribution.Negative quakes often occur several months before the main shocks (not excluding positive ones), with the decrease of LURR (Loading/Unloading Response Ratio) values.It possibly shows that earthquake generating process has come to a short term stage.These characteristics may help to predict the time and location of the future earthquakes,and have been applied to the preliminary prediction of the time and the location of the earthquake of M =6.6 on Sep.11,1996 in Kanto area.
基金This study has been funded by the National Natural Science Foundation of China(Grant No.41941018)and the Second Tibetan Plateau Scientific Expedition and Research Grant(Grant No.2019QZKK0708).
文摘Quasi-NPR(negative Poisson’s ratio)steel is a new type of super bolt material with high strength,high ductility,and a micro-negative Poisson’s effect.This material overcomes the contrasting characteristics of the high strength and high ductility of steel and it has significant energy-absorbing characteristics,which is of high value in deep rock and soil support engineering.However,research on the shear resistance of quasi-NPR steel has not been carried out.To study the shear performance of quasi-NPR steel bolted rock joints,indoor shear tests of bolted rock joints under different normal stress conditions were carried out.Q235 steel and#45 steel,two representative ordinary bolt steels,were set up as a control group for comparative tests to compare and analyze the shear strength,deformation and instability mode,shear energy absorption characteristics,and bolting contribution of different types of bolts.The results show that the jointed rock masses without bolt reinforcement undergo brittle failure under shear load,while the bolted jointed rock masses show obvious ductile failure characteristics.The shear deformation ca-pacity of quasi-NPR steel is more than 3.5 times that of Q235 steel and#45 steel.No fracture occurs in the quasi-NPR steel during large shear deformation and it can provide stable shear resistance.However,the other two types of control bolts become fractured under the same conditions.Quasi-NPR steel has significant energy-absorbing characteristics under shear load and has obvious advantages in terms of absorbing the energy released by shear deformation of jointed rock masses as compared with ordinary steel.In particular,the shear force plays a major role in resisting the shear deformation of Q235 steel and#45 steel,therefore,fracture failure occurs under small bolt deformation.However,the axial force of quasi-NPR steel can be fully exerted when resisting joint shear deformation;the steel itself does not break when large shear deformation occurs,and the supporting effect of the jointed rock mass is effectively guaranteed.
基金the National Key Research and Development Plan Project(Grant No.2016YFC00600901)Zhejiang Province Key Research and Development Plan Active Design Project(Grant No.2019C03104).
文摘With the gradual decrease and exhaustion of shallow mineral resources,underground mining has progressed to greater depths.Here,the geological environment is significantly more complex and nonlinear,and large deformations of rock masses have great potential to occur.Many geotechnical engineering disasters have occurred even while using Poisson’s ratio(PR)anchor cable supports.To efficiently deal with these issues,a new support material called negative Poisson’s ratio(NPR)anchor cable is proposed;this material can withstand large deformations and provide high constant resistance.In this study,the support characteristics of macro-NPR anchor cable under blasting impact were mainly studied.The support effects of PR anchor cable and macro-NPR anchor cable were compared and analyzed with the help of field experiments and numerical simulations.The results indicate that field experiments and discontinuous deformation analysis accurately reflect the failure state of the selected roadway,as well as the tension and deformation of the anchor cables.The road-way supported by PR anchor cables cannot resist rock bursts under ordinary circumstances.However,the NPR anchor cable-supported roadway resisted a rock burst caused by the impact equivalent to a mine earthquake magnitude above 3;it meets the requirements of roadway stability.
基金supported by the National Natural Science Foundation of China(Grant No.51874041)the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China(Grant No.52202012)。
文摘High-speed impact threats and terrorist actions on the battlefield require the development of more effective protective materials and structures,and various protective structure is designed according their energy-absorbing characteristics.In this research,the deformation behavior,microscopic failure modes and energy absorption characteristics of re-entrant hexagonal structure,regular hexagonal structure and regular quadrilateral structure are studied under different strain rates impact.The re-entrant hexagonal structure forms a“X”-shaped deformation zone,the regular quadrilateral and regular hexagonal structure form an“I”-shaped deformation zone.The microscopic appearance of the section is a mixed fracture form.The effects of the topological shape,cell angle,and cell height on the impact behavior of the structure were evaluated.When the cell height is fixed and the cell angle is changed,the energy absorption of the structure increase and then decrease as the relative density increase.The mechanical properties of the structure are optimal when the relative density is about 18.6%and the cell angle is22.5°.When the cell angle is fixed and the cell height is changed,as the relative density increases,the energy absorption of the structure gradually increases.The regular quadrilateral structure and the reentrant hexagonal structure experienced clear strain rate effects under dynamic impact conditions;the regular hexagonal structure did not exhibit obvious strain rate effects.The results presented herein provide a basis for further rational design and selection of shock-resistant protective structures that perform well in high-speed impact environments.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12172314,11772278,12002350,and 11904300)the Jiangxi Provincial Outstanding Young Talents Program(Grant No.20192BCBL23029)+1 种基金the Fundamental Research Funds for the Central Universities of Xiamen University(Grant Nos.20720210025 and 20720220023)the“111”Project(Grant No.B16029)。
文摘The torsional,bending and tensile mechanical properties of Mo_(6)S_(6)nanowire are examined by molecular dynamics(MD)simulations with a first-principles-based reactive force field(ReaxFF).It is found that Mo_(6)S_(6)nanowire shows unique mechanical properties such as high torsional and bending flexibility,high Young's modulus and strength,and negative Poisson's ratio.The Mo_(6)S_(6)nanowire can be strengthened or weakened via twisting,depending on the twist angle.The Mo_(6)S_(6)nanowire with a slight twist angle shows brittle failure,whereas it with a large twist angle exhibits ductile failure and necking behavior.Twisted Mo_(6)S_(6)nanowires show a crossover in the negative Poisson's ratio at critical strains,that is,Poisson's ratio first decreases but then increases,with a minimum value down to around-0.8 at the strain of 0.01 as the twist angle is 21.0°/nm.The negative Poisson's ratio and the crossover are explained by the bond transform that makes zero angles to the wire cross-section.
文摘Materials exhibiting auxetic properties have a negative Poisson’s ratio, which intrigued researchers to understand the behavior of auxetic structure. Several researchers focused on the different auxetic cell designs, while others focused on the auxetic applications. With the advance of additive manufacturing methods, computer-aided design and finite element analysis in recent decades, auxetics have been explored. One of the interesting applications is in the field of biomedical devices or implants, especially for certain natural biomedical organs such as tissues, certain ligaments that have auxetic properties. This paper is an overview of auxetic design approaches and biomedical applications.
基金National Natural Science Foundation of China(Grant Nos.51705158 and 51805174)the Fundamental Research Funds for the Central Universities(Grant Nos.2018MS45 and 2019MS059)。
文摘Focusing on the structural optimization of auxetic materials using data-driven methods,a back-propagation neural network(BPNN)based design framework is developed for petal-shaped auxetics using isogeometric analysis.Adopting a NURBSbased parametric modelling scheme with a small number of design variables,the highly nonlinear relation between the input geometry variables and the effective material properties is obtained using BPNN-based fitting method,and demonstrated in this work to give high accuracy and efficiency.Such BPNN-based fitting functions also enable an easy analytical sensitivity analysis,in contrast to the generally complex procedures of typical shape and size sensitivity approaches.
基金supported by a National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (NRF-2020R1A2C3003344 and NRF-2020R1A4A2002728)
文摘Yarn sensors have shown promising application prospects in wearable electronics owing to their shape adaptability, good flexibility, and weavability. However, it is still a critical challenge to develop simultaneously structure stable, fast response, body conformal, mechanical robust yarn sensor using full microfibers in an industrial-scalable manner. Herein, a full-fiber auxetic-interlaced yarn sensor(AIYS) with negative Poisson’s ratio is designed and fabricated using a continuous, mass-producible, structure-programmable, and low-cost spinning technology. Based on the unique microfiber interlaced architecture, AIYS simultaneously achieves a Poisson’s ratio of-1.5, a robust mechanical property(0.6 c N/dtex), and a fast train-resistance responsiveness(0.025 s), which enhances conformality with the human body and quickly transduce human joint bending and/or stretching into electrical signals. Moreover, AIYS shows good flexibility, washability, weavability, and high repeatability. Furtherly, with the AIYS array, an ultrafast full-letter sign-language translation glove is developed using artificial neural network. The sign-language translation glove achieves an accuracy of 99.8% for all letters of the English alphabet within a short time of 0.25 s. Furthermore, owing to excellent full letter-recognition ability, real-time translation of daily dialogues and complex sentences is also demonstrated. The smart glove exhibits a remarkable potential in eliminating the communication barriers between signers and non-signers.
基金Supported by Fundamental Research Funds for the Central Universities(Grant No.310812161003)Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2016JM5035).
文摘Irregular honeycomb structures occur abundantly in nature and in man-made products,and are an active area of research.In this paper,according to the optimization of regular honeycomb structures,two types of irregular honeycomb structures with both positive and negative Poisson’s ratios are presented.The elastic properties of irregular honeycombs with varying structure angles were investigated through a combination of material mechanics and structural mechanics methods,in which the axial deformation of the rods was considered.The numerical results show that axial deformation has a significant influence on the elastic properties of irregular honeycomb structures.The elastic properties of the structure can be considered by the enclosed area of the unit structure,the shape of the unit structure,and the elastic properties of the original materials.The elastic properties considering the axial deformation of rods studied in this study can provide a reference for other scholars.
基金The financial support of the NSFC (20274004) and P&G is gratefully acknowledged.
文摘Three new kinds of molecular networks are designed and predicted to exhibit negative Poisson ratios. Molecular mechanics calculations on these networks show that the magnitude of Poisson ratios depends on the relative flexibility of beam and arm structures. Several new kinds of auxetic polymers, whose successful synthesis should be easier than that of the corresponding auxetic networks, are then proposed. It is found that the kabob-like polymers with auxegens lying vertically on the main chain can acquire auxeticity while those with auxegens lying horizontally on the main chain cannot. Besides, a half kabob-like or pseudo-ladder polymer with auxegens linked at the intersection of the beam and the arm does show auxeticity when adopting constrictive conformers. It is, however, worthwhile noting that the origins of auxeticity still await and strongly deserve further experimental and theoretical investigations.
基金supported by the National Key Research and Development Program of China(No.2020YFC1107103)the National Natural Science Foundation of China(No.51821093)the Research Project of Public Welfare Technology Application of Zhejiang Province,China(No.LGF21H010006).
文摘Tracheal stents are an important form of treatment for benign or malignant central airway obstruction.However,the mechanical behavior of current tracheal stents is significantly different from that of the native trachea,which leads to a variety of serious complications.In this study,inspired by the structure of the native trachea,a wavy non-uniform ligament chiral tracheal stent is proposed,in which J-shaped stress-strain behavior and negative Poisson's ratio response are achieved by replacing the tangential ligament of tetrachiral and anti-tetrachiral hybrid structure with a wavy non-uniform ligament.Through the combination of theoretical analysis,finite element analysis and experimental tests,a wide range of desired J-shaped stress-strain curves are explored to mimic the native porcine trachea by tailoring the stent geometry.Besides,the negative Poisson’s ratio and auxetic diameter curves versus axial strain of the stent are also studied in detail,thus contributing to the enhancement of cross-section ventilation and reducing the migration of the stent.This novel tracheal stent with a unique microstructure shows a potential to perfectly match the physiological activities of the native trachea and thereby reduce potential complications.
文摘Auxetic material structures exhibit a negative Poisson ratio. The structure expands in the axial and transverse directions under tensile loading and vice versa under compression loading. Many fabricated designs for auxetic materials exist such as re-entrant hexagonal, chiral, and arrowhead geometries. This paper studies the unit cell of the re-entrant hexagonal geometry to understand how changing the internal angle and fillet radius of the structure affects the Poisson’s ratio. The material chosen for this study is acrylonitrile butadiene styrene (ABS) due to its availability and frequent use in additive manufacturing. The study was based on finite element analysis. It is observed that the direction of load applied to the unit cell affects the unit cell strain, Poisson’s ratio, and maximum load capacity before failure responses. It is noticed that the re-entrant cell starts by showing a standard non-auxetic behavior until it reaches a specific axial strain value. A quadratic correlation is identified between axial and transverse strain. Designing an auxetic structure starts with understanding the behavior of a unit cell structure. The auxetic structure design is a complex process that requires a compromise between auxetic property to be achieved and load capacity via avoiding stress concentration zones.