Static profiles of capillary surfaces in the annular space between two coaxial cones under microgravity

In space,surface tension plays an important role and liquid behaviour is much different from that on the ground.The static capillary surfaces in the annular space between two coaxial cones under microgravity are studied in this paper.Theoretical expressions of the capillary surfaces are derived and a procedure is developed to predict the capillary surfaces based on the expressions.By considering various liquid contact angles,liquid volumes,and container geometries,numerical simulation with the volume of fluid method is carried out and microgravity experiments in Beijing Drop Tower are performed.The numerical and experimental results are in good agreement with theoretical predictions.Furthermore,capillary surfaces in an annulus with constant cross-section and in a spherical tank with a central column are also discussed.z3 will decrease obviously with the increase of the liquid contact angle.The theoretical models and findings will be great helpful for liquid management in space and the evaluation of propellant residue.

Simulation of liquid cone formation on the tip apex of indium field emission electric propulsion thrusters

Field emission electric propulsion(FEEP) thrusters possess excellent characteristics, such as high specific impulse, low power requirements, compact size and precise pointing capabilities,making them ideal propulsion devices for micro-nano satellites. However, the detection of certain aspects, such as the evolution process of the liquid cone and the physical quantities at the cone apex, proves challenging due to the minute size of the needle tip and the vacuum environment in which they operate. Consequently, this paper introduces a computational fluid dynamics(CFD) model to gain insight into the formation process of the liquid cone on the tip apex of indium FEEP. The CFD model is based on electrohydrodynamic(EHD) equations and the volume of fluid(VOF) method. The entire cone formation process can be divided into three stages, and the time-dependent characteristics of the physical quantities at the cone apex are investigated. The influences of film thickness, apex radius size and applied voltage are compared.The results indicate a gradual increase in the values of electrostatic stress and surface tension stress at the cone apex over an initial period, followed by a rapid escalation within a short duration.Apex configurations featuring a small radius, thick film and high voltage exhibit a propensity for liquid cone formation, and the cone growth time decreases as the film thickness increases.Moreover, some unstable behavior is observed during the cone formation process.

Numerical Study of Temperature-Dependent Viscosity and Thermal Conductivity of Micropolar Ag–MgO Hybrid Nanofluid over a Rotating Vertical Cone

The present paper examines the temperature-dependent viscosity and thermal conductivity of a micropolar silver(Ag)−Magnesium oxide(MgO)hybrid nanofluid made of silver and magnesium oxide over a rotating vertical cone,with the influence of transverse magnetic field and thermal radiation.The physical flow problem has been modeled with coupled partial differential equations.We apply similarity transformations to the nondimensionalized equations,and the resulting nonlinear differential equations are solved using overlapping grid multidomain spectral quasilinearization method.The flow behavior for the fluid is scrutinized under the impact of diverse physical constraints,which are illustrated graphically.The results of the skin friction coefficient and Nusselt number varying different flow parameters are presented in the form of a table.It is observed that the main flow of the hybrid nanofluid,nano particle fraction of silver and Magnesium/water,enhances compared to the mono-nano fluid MgO as the coupling number increases.The application of studies like this can be found in the atomization process of liquids such as centrifugal pumps,viscometers,rotors,fans.

An Alternative Way to Mapping Cone: The Algebraic Topology of the Pinched Tensor

In this research, we explore the properties and applications of the mapping cone and its variant, the pinched mapping cone. The mapping cone is a construction that arises naturally in algebraic topology and is used to study the homotopy type of spaces. It has several key properties, including its homotopy equivalence to the cofiber of a continuous map, and its ability to compute homotopy groups using the long exact sequence associated with the cofiber. We also provide an overview of the properties and applications of the mapping cone and the pinched mapping cone in algebraic topology. This work highlights the importance of these constructions in the study of homotopy theory and the calculation of homotopy groups. The study also points to the potential for further research in this area which includes the study of higher homotopy groups and the applications of these constructions to other areas of mathematics.

A novel seed cone of Pinus from the Miocene of coastal Southeast China indicates kinship with Southeast Asian pines

Pinus is an economically and ecologically important genus whose members are dominant components globally in low-latitude mountainous and mid-latitude temperate forests.Pinus species richness is currently concentrated in subtropical mid-low latitudes of the Northern Hemisphere,differing from the latitudinal diversity gradient mostly recognized in woody angiosperms.How the present pattern was developing in Earth's past is still poorly studied,particularly in eastern Asia.Here,a new fossil species,Pinus shengxianica sp.nov.is described based on a fossil seed cone from the Late Miocene Shengxian Formation in Zhejiang,southeast China.A co-occurring cone is recognized as a known fossil species,Pinus speciosa Li.Extensive comparison of extant and fossil members of Pinus suggests P.shengxianica shares a striking cone similarity to Pinus merkusii and Pinus latteri(subsection Pinus)from tropical Southeast Asia in having annular bulges around the umbo on the apophysis.The morphological resemblance indicates these two extant low-latitude pines probably possess a close affinity with the present newly-discovered P.shengxianica and originated from East Asian mid-low latitude ancestors during this generic re-diversification in the Miocene.This scenario is consistent with the evolutionary trajectory reflected by the pine fossil history and molecular data,marking the Miocene as a key period for the origin and evolution of most extant pines globally.The co-occurrences of diverse conifers and broadleaved angiosperms preferring diverse niches demonstrate Late Miocene eastern Zhejiang was one of the hot spots for coniferophyte diversity and hosted a needled-broadleaved mixed forest with complex vegetation structure and an altitudinal zonation.

Transcriptome Analysis of Auxin Drives Cone Size Regulation in Fokienia hodginsii

As the reproductive organ of the endangered species Fokienia hodginsii,the size of the cones is a constraint on the reproductive renewal of the population.In this study,the molecular basis of the influence of cone size on F.hodginsii was elucidated by comparing the phenotype,biochemistry,and transcriptome of two cultivars of F.hodginsii(‘FJ431’and‘FJ415’).The two cultivars differed significantly in cone size,with FJ431 having a significantly larger cone size and weight than FJ415,1.32 and 1.90 times that of FJ415,respectively.RNA-Seq analysis of both cultivars retrieved 75,940 genes whose approximate functions were classified as the pathway of response to endogenous stimulus and response to hormone and showed significant differences in the auxin-activated signaling pathway,particularly the MAPK signaling pathway-plant.Furthermore,the endogenous IAA content was significantly higher in FJ431 than in FJ415,and 1.58 and 1.29 times more IAA was present in immature and mature cones,respectively.Moreover,exogenous IAA treatment significantly induced the expression of the MAPK pathway-related gene TRINITY_DN10564_c0_g1 and significantly inhibited the expression of the MAPK pathwayrelated gene TRINITY_DN17056_c0_g1.Our work suggests that IAA can affect the cone size of F.hodginsii,most probably through the MAPK pathway.This has high theoretical and practical significance for the improvement of genetic breeding and the further cultivation of quality germplasm resources of F.hodginsii.

Technique for Estimating the Cone Bearing Smoothing Parameters

Cone penetration testing (CPT) is an extensively utilized and cost effective tool for geotechnical site characterization. CPT consists of pushing at a constant rate an electronic cone into penetrable soils and recording the resistance to the cone tip (qc value). The measured qc values (after correction for the pore water pressure) are utilized to estimate soil type and associated soil properties based predominantly on empirical correlations. The most common cone tips have associated areas of 10 cm2 and 15 cm2. Investigators also utilized significantly larger cone tips (33 cm2 and 40 cm2) so that gravelly soils can be penetrated. Small cone tips (2 cm2 and 5 cm2) are utilized for shallow soil investigations. The cone tip resistance measured at a particular depth is affected by the values above and below the depth of interest which results in a smoothing or blurring of the true bearing values. Extensive work has been carried out in mathematically modelling the smoothing function which results in the blurred cone bearing measurements. This paper outlines a technique which facilitates estimating the dominant parameters of the cone smoothing function from processing real cone bearing data sets. This cone calibration technique is referred to as the so-called CPSPE algorithm. The mathematical details of the CPSPE algorithm are outlined in this paper along with the results from a challenging test bed simulation.

不同成像参数下CBCT的成像质量分析

目的:主观评价和客观评估不同成像参数下CBCT的图像质量,分析图像质量的主观评价和客观评价间的关系。方法:分别采用6台不同品牌CBCT扫描仪〔3D Accuitomo(Morita)、i-CAT(Kavo)、5G(NewTom)、Smart3D(北京朗视)、DCT Pro(Vatech)、VGi(NewTom)〕,在各个品牌的典型曝光条件下(电压和电流强度不同)扫描空间分辨率模体和高仿真头模,7位医师对拍摄的CBCT图像进行主观评价打分,比较不同CBCT扫描仪的空间分辨率和对常见口腔解剖结构的可见性。客观评价指标采用各仪器所获的图像空间分辩率(LP/mm)。结果:7位医师的组内一致性和组间一致性均无显著性差异。主观评价New Tom 5G为2分,i-CAT为5分,其余4个品牌匀为4分,客观评价i-CAT的LP/mm为1.8,Smart3D为2.0,其余4个品牌为1.0~1.7。在相同管电流条件下,不同管电压的图像主观质量有显著性差异。在相同管电压条件下,不同管电流的图像主观质量有显著性差异。结论:图像质量的主客观评价具有一定的一致性,不同品牌之间的客观评价差异可能与电压、电流强度不同有关。

基于锥角控制的下风向风力机功率调节策略

针对中小型下风向风力机开展了功率调节策略研究.首先,对100 W下风向风力机进行了仿真计算和风洞实验,探究了下风向风力机的气动性能;然后,分析了风轮锥角对风力机输出功率和叶根载荷的影响机制,归纳出输出功率与锥角余弦值的三次方正相关,叶根载荷与锥角余弦值的平方正相关;最后,形成了一套基于锥角控制的下风向风力机功率主/被动调节策略.研究结果表明:采用主动调节策略可在超额定风速运行时有效控制风轮输出功率,并可使叶根载荷极值降低14.2%;较控制前,采用被动调节策略可使得在超额定风速运行时,输出功率与额定功率的平均偏差减小20.84 W.两种调节策略皆可实现超额定风速运行时下风向风力机输出功率的有效控制.

集优化问题的适定性和稳定性

在赋范线性空间中讨论了集优化问题的适定性和稳定性.首先,给出集优化问题3种适定性的概念及其关系.其次,借助局部锥Lipschitz连续性并运用分析方法刻画了集优化问题的适定性.最后,研究了具锥Lipschitz连续性集值映射的参数集优化问题的Berge连续性和极小解映射的紧性.

基于组合圆锥构型的水下声学定位系统布站优化

在水下目标定位中,布站构型的共面约束会导致目标单点定位的几何精度因子(GDOP)理论最小值不能达到。为改善水下布站的观测矩阵,将单圆锥扩展为组合圆锥构型布站模式。然而,传统的优化算法易陷入局部最优且存在收敛效率低等问题。针对以上问题,提出了一种改进的自适应粒子群算法。首先提出了一种有共面约束的水下声学定位系统组合圆锥构型,并证明了所提出的组合圆锥构型具有可叠加性、可旋转性以及GDOP旋转不变性;其次,针对布站优化指标单一的问题,构建了一种基于水下目标全局GDOP的布站优化准则;在此基础上提出了一种基于自适应粒子群的优化算法,并应用于组合圆锥构型下的水下声学定位系统布站优化。所提出的自适应粒子群算法能增强布站的全局最优性,提高算法收敛效率和水下目标的定位精度。

运动伪影校正技术改善肾动脉瘤锥形束CT图像质量

目的观察运动伪影校正技术(MFT)对于改善肾动脉瘤锥形束CT(CBCT)图像质量的价值。方法前瞻性选取20例拟接受经导管动脉栓塞治疗的肾动脉瘤患者,于CBCT引导下行肾动脉造影,采用MFT处理运动伪影;对MFT校正前、后图像质量进行主、客观评价,评估其显示肾动脉、载瘤动脉及靶区血管树情况,测算单位密度像素平均值(mean)、标准差(SD)及血管边缘锐化误差率。结果MFT校正后,肾动脉瘤最大密度投影图像显示肾动脉、重建CBCT图像显示载瘤动脉均明显优于校正前(P均<0.05);利用Flightplan for Liver软件可自动提取清晰的血管树;肾动脉瘤CBCT图像SD及血管边缘锐化误差率明显减小而mean明显增加(P均<0.05)。结论MFT可有效改善肾动脉瘤CBCT图像质量。

电缆终端应力锥错位缺陷对界面温度及应力分布的影响

电缆终端内部缺陷会造成终端内部电场分布不均、局部温度升高与应力分布变化,可能引发局部放电造成绝缘击穿。为研究终端应力锥错位缺陷对电缆界面温度及应力分布的影响,分别建立了电缆终端安装不足与安装过盈情况下的电缆终端错位缺陷模型,并进行电-热-力多物理场耦合仿真分析。结果表明:电缆终端绝缘屏蔽层截断处是电缆终端的薄弱部位,终端界面温度和界面压力都会在绝缘屏蔽层截断处发生突变。当电缆终端存在安装不足缺陷时,终端屏蔽层截断处与应力锥根部之间会出现电场升高区域,在安装位置为-7.5 mm时界面温度最高,绝缘界面压力值升高,且安装位置为-2.5mm时绝缘承受的压力值最大;当电缆终端存在安装过盈缺陷时,绝缘屏蔽层截断处会发生电场畸变,电场突变量随着偏移量的增加而增大,在安装位置为+5.0mm时绝缘界面压力值最大,且界面压力突变量增加发生畸变。因此,在电缆终端实际设计安装与运行维护中,额外注意应力锥错位缺陷对终端内部应力分布的影响十分必要。

海水淡化厂与区域水-能耦合系统的协同调度

海水淡化厂具有能量密集、运行灵活的特点,是理想的电力需求响应资源。然而,现有关于淡化厂与电网协同运行的研究大多关注电网和淡化厂的一体化调度、无法适应双方自主决策的工程场景,对淡化厂运行约束的刻画也比较粗糙。该文研究反渗透淡化厂与区域水-能耦合系统(waterenergy nexus,WEN)的协同运行方法。首先,考虑淡化厂的生产流程、调节特性和运行约束,分别建立传统及新能源淡化厂的水-能管理模型;其次,在保障两类淡化厂和区域WEN自主决策和信息隐私的条件下,提出以双方调度计划互动为载体的“激励型”和“价格型”两种协同运行机制及调度模型,并提出基于二阶锥松弛和McCormick包络的求解方法。用算例验证所提协同运行机制、调度模型及求解方法的有效性。

盾尾刷-油脂腔密封系统油脂逃逸规律研究

油脂逃逸导致油脂腔内压力降低,由此诱发的盾尾密封系统漏水、漏浆等安全责任事故屡屡发生。研制盾尾刷密封系统油脂逃逸的单元体试验装置,采用逐级加压将油脂注入盾尾密封系统油脂腔内,每级压力持续420 s,记录不同盾尾间隙及不同油脂锥入度工况下腔内的密封油脂开始逃逸时的油脂注入压力值、以及逃逸后储油装置中密封油脂的稳定损耗速率,最终获得了盾尾密封系统的油脂逃逸规律,并总结了盾尾油脂的逃逸模式。研究结果表明:1)油脂逃逸速率主要受油脂锥入度和油脂压力的影响,根据油脂逃逸规律变化曲线,油脂逃逸速率可以分为不逃逸、低速逃逸、快速逃逸3个阶段。油脂不逃逸至低速逃逸的油脂压力称为油脂逃逸压力,油脂低速逃逸与快速逃逸之间的油脂压力值为油脂腔内外压差控制值;2)建立了油脂逃逸速率和工程中油脂消耗量的对应关系,结合工程中每环盾尾油脂允许消耗量可实时判断盾尾刷密封性能;3)当油脂锥入度小于286.4(1/10 mm),盾构姿态与管片姿态控制良好时(盾尾平均间隙为75 mm),在水土压力及同步注浆压力基础上最大可增加0.3 MPa的油脂压力,提出的油脂腔内外压差控制值可指导实际工程盾尾油脂压力设定最大值;4)油脂逃逸模式可划分为无逃逸、非均匀逃逸和均匀逃逸3种模式并得出其发生条件。该研究对于指导盾尾密封性的设计及施工有着基础性的意义。

含SOP的交直流混合配电网日前优化调度

为实现交直流混合配电网的高效运行,提出一种含智能软开关的交直流配电网优化调度方法。在对应用于交直流配电网的智能软开关工作原理进行阐述的基础上,建立含智能软开关的交直流配电网优化调度模型。通过线性化和凸松弛技术,将所建立的非线性优化模型转化为二阶锥规划模型,并且采用改进的50节点算例分析验证模型的有效性。算例结果表明,基于所建模型得到的智能软开关运行策略能够降低配电网运行损耗及改善电压越限的情况,显著提高混合配电网的经济性。

单侧完全性唇腭裂患者咽腔三维分析

目的探讨单侧完全性唇腭裂患者咽腔三维结构与正常人之间的差异。方法应用Mimics软件对成年单侧完全性唇腭裂患者及同龄正常人的咽腔锥体束CT(cone beam computed tonoography,CBCT)数据进行分析,比较两组之间气性咽腔横径(Dtp、Dtc2、Dtc3)、前后径(Dsp、Dsc2、Dsc3)、横截面积(Ap、Ac2、Ac3)以及体积(Vt、Vp、Vp-c2、Vc2-c3)等的差异。结果共入组18例单侧完全性唇腭裂术后患者及20例同龄正常人;单侧完全性唇腭裂患者Dsp、Ap、Vt、Vp及Vp-c2大于正常组(P=0.000、P=0.003、P=0.021、P=0.004、P=0.000)。结论单侧完全性唇腭裂术后患者咽腔大于正常人,且差异主要是鼻咽部前后径增加所导致的鼻咽面积、体积增加。

平行轴变齿厚齿轮接触应力解析计算

变齿厚齿轮作为一种新型齿轮,目前尚无成熟的接触应力理论和计算方法。为了从理论上计算变齿厚齿轮齿面上的最大接触应力,了解变齿厚齿轮在不同参数下接触应力的变化情况。文中在赫兹公式的基础上,考虑变齿厚齿轮的几何结构,确定了变齿厚齿轮重合度、曲率半径、法向载荷、接触线长、重合度系数和齿形角系数的计算方法。研究了不同节锥角、齿数、模数和压力角对变齿厚齿轮接触应力的影响,通过有限元分析验证了变齿厚齿轮接触应力理论计算公式的正确性。研究结果表明:推导出的变齿厚齿轮接触应力计算公式具有较高的精度,能够准确地反映齿面的真实接触应力值,为变齿厚齿轮的结构设计、强度校核等提供了一定的依据。

新疆地区成人下颌骨副孔解剖位置的CBCT研究

目的:应用锥形束CT对新疆地区维吾尔族和汉族成年人下颌骨副孔解剖位置进行回顾性研究,为临床操作提供理论参考。方法:选取2020年1月-2021年12月在新疆医科大学第五附属医院口腔科就诊的300例维吾尔族和汉族成年人CBCT影像资料,对下颌骨进行分区,获得各副孔的相应位置、直径及其到牙槽嵴顶的距离,分析性别、民族、年龄与副孔发生情况的关系。结果:300例成年人的影像中共找出1361个副孔,维吾尔族686个,汉族675个,副孔发生率100%,人均(4.54±1.58)个。在舌侧前部发生率最高,维吾尔族为85.7%,汉族为81.9%,副孔的发生与性别、民族、年龄差异无统计学意义。维吾尔族副孔的直径为(0.79±0.23)mm,汉族为(0.70±0.19)mm,维吾尔族中副孔直径≥1 mm占15.74%,汉族中副孔直径≥1 mm占13.48%,直径比较差异有统计学意义(P<0.001)。维吾尔族副孔到牙槽嵴顶的距离为(12.65±9.35)mm,汉族为(13.15±8.01)mm,差异无统计学意义(P=0.058)。在副孔高发的舌侧前部区域,颏嵴上和颏嵴下差异均有统计学意义(P<0.05)。结论:新疆地区成年人群中均存在副孔现象,术前应仔细核对CBCT影像,术中避免损伤副孔结构,减少并发症的发生。

单点渐进成形工艺参数对铝合金圆锥台表面粗糙度的影响

表面粗糙度是影响渐进成形零件质量的关键因素之一,为了探究工艺参数对零件表面粗糙度的影响,采用单点渐进成形技术对5052铝合金板料进行成形实验,研究工艺参数轴向进给量、主轴转速、进给速度对圆锥台表面质量的影响,并使用粗糙度仪测量外表面粗糙度R_(a)值。实验结果表明:降低轴向进给量可以改善零件表面质量;随着主轴转速增大,零件粗糙度R_(a)呈先减小后增大趋势;进给速度对粗糙度R_(a)影响较小,随着进给速度增大,粗糙度R_(a)呈先减小后增大趋势,受零件尺寸限制,进给速度超过2817 mm·min^(-1)时,内表面“鱼鳞纹”和粗糙度R_(a)几乎没有变化。