Dynamic Multi-class Network Loading Problem

The dynamic network loading problem (DNLP) consists in determining on a congested network, time-dependent arc volumes, together with arc and path travel times, given the time varying path flow departure rates over a finite time horizon. The objective of this pap er is to present the formulation of an analytical dynamic multi-class network loading model. The mo del does not require the assumption of the FIFO condition. The existence of a solution to the model is shown.

Prospects of Shanghai City Network in 21~st Century

According to the population, area and economy development of Shanghai City, this paper introduces the load forecast of the city and points out that the development of urban power network should adapt the development of its economy. In this paper, the developing targets of Shanghai power network are also presented.

Research of improving the dynamic scheduling algorithm in the CAN bus control networks

Currently, the article analyzes the CAN bus＇s rule of priority＇s arbitration bit by bit without destroy. It elicits the conclusion that if static priority based on the affirmatory system model is used, the lower priority＇s messages will be delayed considerably more, even some data will be lost when the bus＇s bandwidth is widely used. The scheduling cannot be modified neither during the system when static priority is used. The dynamic priority promoting method and the math model of SQSA and SQMA are presented; it analyzes the model＇s rate of taking in and sending out in large quantities, the largest delay, the problems and solutions when using SQMA. In the end, it is confirmed that the method of improving dynamic priority has good performances on the network rate of taking in and sending out in large quantities, the average delay, and the rate of network usage by emulational experiments.

New artificial neural networks for true triaxial stress state analysis and demonstration of intermediate principal stress effects on intact rock strength

Simulations are conducted using five new artificial neural networks developed herein to demonstrate and investigate the behavior of rock material under polyaxial loading. The effects of the intermediate principal stress on the intact rock strength are investigated and compared with laboratory results from the literature. To normalize differences in laboratory testing conditions, the stress state is used as the objective parameter in the artificial neural network model predictions. The variations of major principal stress of rock material with intermediate principal stress, minor principal stress and stress state are investigated. The artificial neural network simulations show that for the rock types examined, none were independent of intermediate principal stress effects. In addition, the results of the artificial neural network models, in general agreement with observations made by others, show （a） a general trend of strength increasing and reaching a peak at some intermediate stress state factor, followed by a decline in strength for most rock types; （b） a post-peak strength behavior dependent on the minor principal stress, with respect to rock type; （c） sensitivity to the stress state, and to the interaction between the stress state and uniaxial compressive strength of the test data by the artificial neural networks models （two-way analysis of variance; 95% confidence interval）. Artificial neural network modeling, a self-learning approach to polyaxial stress simulation, can thus complement the commonly observed difficult task of conducting true triaxial laboratory tests, and/or other methods that attempt to improve two-dimensional （2D） failure criteria by incorporating intermediate principal stress effects.

A Coverage-Aware Unequal Clustering Protocol with Load Separation for Ambient Assisted Living Based on Wireless Sensor Networks

Ambient Assisted Living(AAL) is becoming an important research field. Many technologies have emerged related with pervasive computing vision, which can give support for AAL. One of the most reliable approaches is based on wireless sensor networks(WSNs). In this paper, we propose a coverage-aware unequal clustering protocol with load separation(CUCPLS) for data gathering of AAL applications based on WSNs. Firstly, the coverage overlap factor for nodes is introduced that accounts for the degree of target nodes covered. In addition, to balance the intra-cluster and inter-cluster energy consumptions, different competition radiuses of CHs are computed theoretically in different rings, and smaller clusters are formed near the sink. Moreover, two CHs are selected in each cluster for load separation to alleviate the substantial energy consumption difference between a single CH and its member nodes. Furthermore, a backoff waiting time is adopted during the selection of the two CHs to reduce the number of control messages employed. Simulation results demonstrate that the CUCPLS not only can achieve better coverage performance, but also balance the energy consumption of a network and prolong network lifetime.

Spatial Load Balancing in Wide-Area Wireless Networks

Load balancing is typically used in the frequency domain of cellular wireless networks to balance paging, access, and traffic load across the available bandwidth. In this paper, we extend load balancing into the spatial domain, and we develop two approaches--network load balancing and single-carrier multilink--for spatial load balancing. Although these techniques are mostly applied to cellular wireless networks and Wi-Fi networks, we show how they can be applied to EV-DO, a 3G cellular data network. When a device has more than one candidate server, these techniques can be used to determine the quality of the channel between a server and the device and to determine the Ipad on each server. The proposed techniques leverage the advantages of existing EV-DO network architecture and are fully backward compatible. Network operators can substantially increase network capacity and improve user experience by using these techniques. Combining load balancing in the frequency and spatial domains improves connectivity within a network and allows resources to be optimally allocated according to the p-fair criterion. Combined load balancing further improves performance.

Genetic algorithm for multi-protocol label switching

A new method for multi-protocol label switching is presented in this study, whose core idea is to construct model for simulating process of accommodating network online loads and then adopt genetic algorithm to optimize the model. Due to the heuristic property of evolutional method, the new method is efficient and effective, which is verified by the experiments.

Potential Problems in Land Development Intensity under Current Control and Corresponding Strategies:A Case Study of Xingtang County

Cities renew and develop constantly. In the context of scarce land resources, China’s cities in thehigh-density and high-development construction mode will indirectly affect the road network load aroundthe cities. “Land development intensity”, as an important content in China’s current regulatory plan, is akey factor to realize and guarantee the rational allocation and utilization of land resources in cities. TakingXingtang County of Shijiazhuang City as an example, this paper made an in-depth analysis and summaryof its current characteristics and existing problems, and put forward reasonable solutions and relevantoptimization strategies accordingly, attempted to form a reasonable land use and planning layout and reducetraffi c pressure, so as to provide experience and reference for other cities to solve such problems.

Distributed Control of Thermostatically Controlled Loads in Distribution Network with High Penetration of Solar PV

High penetration of solar energy can result in voltage rise in midday,while growth in residential air conditioning is the main contributor of overloading and voltage drop issues during peak demand time.This paper provides a hierarchical control scheme to coordinate multiple groups of aggregated thermostatically controlled loads to regulate network loading and voltage in a distribution network.Considering the limited number of messages that can be exchanged in a realistic communication environment,an event-triggered distributed control strategy is proposed in this paper.Through intermittent on and off toggling of air conditioners,the required active power adjustment is shared among participating aggregators to solve the issue.A case study is conducted and simulation results are presented to demonstrate the performance of the proposed control scheme.

Multiplicative multi-attribute auction based optimal network selection for heterogeneous wireless networks

One of the remarkable features of the next generation network is the integration of heterogeneous wireless networks, which enables mobile users with multi-mode terminals access to the best available network seamlessly. However, most of previous work only takes account of either maximizing single user＇s utility or the whole network＇s payoff, rarely considers the negotiation between them. In this paper, we propose a novel network selection approach using improved multiplicative multi-attribute auction （MMA）. At first, an improved MMA method is put forward to define the user＇s utility. Additionally, user cost is defined by considering allocated bandwidth, network load intensity and cost factor parameter. And last the best suitable network is selected according to the user＇s performance-cost-ration. Simulation results confirm that the proposed scheme outperforms the existing scheme in terms of network selection＇s fairness, user＇s performance-cost-ration, load balancing and the number of accommodated users.

Joint load balancing and interference coordination in multi-antenna heterogeneous networks

In heterogeneous networks（Het Nets）, it is desirable to offload users from macro cells to small cells to achieve load balancing. However, the offloaded users suffer a strong inter-tier interference. To guarantee the performance of the offloaded users, the interference from macro cells should be carefully managed. In this paper, we jointly optimize load balancing and interference coordination in multi-antenna Het Nets. Different from previous works, instead of almost blank subframes（ABS） on which the macro cells waste time resource, the macro cells suppress the interference to the offloaded users by zero-forcing beamforming（ZFBF） on interference nulling subframes（INS）. Considering user association cannot be conduct frequently, we derive the long-term throughput of users over Rayleigh fading channels while previous works focused on instantaneous rate. From the perspective of the spectrum efficiency and user fairness, we formulate a long-term network-wide utility maximization problem. By decomposing the problem into two subproblems, we propose an efficient joint load balancing and interference coordination strategy. Simulation results show that our proposal can achieve good system performance gains over counterparts in term of the network utility, cell edge throughput and average throughput.

Vector Segment Routing for Large-Scale Multilayer Satellite Network

With the expansion of satellite constellation,routing techniques for small-scale satellite networks have problems in routing overhead and forwarding efficiency.This paper proposes a vector segment routing method for large-scale multi layer satellite networks.A vector forwarding path is built based on the location between the source and the destination.Data packets are forwarded along this vector path,shielding the influence of satellite motion on routing forwarding.Then,a dynamic route maintenance strategy is suggested.In a multi layer satellite network,the low-orbit satellites are in charge of computing the routing tables for one area,and the routing paths are dynamically adjusted in the area in accordance with the network.The medium-orbit satellites maintain the connectivity of vector paths in multiple segmented areas.The forwarding mode based on the source and destination location improves the forwarding efficiency,and the segmented route maintenance mode decreases the routing overhead.The simulation results indicate that vector segment routing has significant performance advantages in end-to-end delay,packet loss rate,and throughput in a multi layer satellite network.We also simulate the impact of routing table update mechanism on network performance and overhead and give the performance of segmented vector routing in multi layer low-orbit satellite networks.

A novel power system reconfiguration for a distribution system with minimum load balancing index using bacterial foraging optimization algorithm

In this paper, the objective of minimum load balancing index （LBI） for the 16-bus distribution system is achieved using bacterial foraging optimization algorithm （BFOA）. The feeder reconfiguration problem is formulated as a non-linear optimization problem and the optimal solution is obtained using BFOA. With the proposed reconfiguration method, the radial structure of the distribution system is retained and the burden on the optimization technique is reduced. Test results are presented for the 16-bus sample network, the proposed reconfiguration method has effectively decreased the LBI, and the BFOA technique is efficient in searching for the optimal solution.