A Dual Model Watermarking Framework for Copyright Protection in Image Processing Networks

Image processing networks have gained great success in many fields,and thus the issue of copyright protection for image processing networks hasbecome a focus of attention. Model watermarking techniques are widely usedin model copyright protection, but there are two challenges: (1) designinguniversal trigger sample watermarking for different network models is stilla challenge;(2) existing methods of copyright protection based on trigger swatermarking are difficult to resist forgery attacks. In this work, we propose adual model watermarking framework for copyright protection in image processingnetworks. The trigger sample watermark is embedded in the trainingprocess of the model, which can effectively verify the model copyright. And wedesign a common method for generating trigger sample watermarks based ongenerative adversarial networks, adaptively generating trigger sample watermarksaccording to different models. The spatial watermark is embedded intothe model output. When an attacker steals model copyright using a forgedtrigger sample watermark, which can be correctly extracted to distinguishbetween the piratical and the protected model. The experiments show that theproposed framework has good performance in different image segmentationnetworks of UNET, UNET++, and FCN (fully convolutional network), andeffectively resists forgery attacks.

Underwater multiple target tracking decision making based on an analytic network process

Underwater multi-target tracking logic and decision （UMTLD） has difficulty resolving multi-target tracking problems for underwater vehicles. Present methods assume factors in UMTLD are uncorrelated, when these are actually in a complex, interdependent relationship. To provide this, an index set of multi-target tracking decision characteristics and an analytic network process （ANP） model of the UMTLD method was -established. This method brings the index set of multi-target tracking decision into the ANP model, and the optimization multitarket tracking decision is achieved via computation of the resulting supermatrix. The rationality and robustness of decision results increase in simulations by 13% and 47% respectively with analytic hierarchy process （AHP）. These results indicate that the ANP method should be the preferred method when UMTLD factors are interdependent.

Using analytic network process to analyze problems for implementing turn-key construction projects in Taiwan

The turn-key construction project is implemented in Taiwan not by a single company but by a make-shift group of several companies. Hence,problems to coordinate the professional construction management (PCM) and the supervising architectural company often occur for the lack of long-term experience to work together. The various factors that affect the implementation of turn-key projects currently practiced in Taiwan are analyzed using the analytic network process (ANP). The objective is to study how the twelve key factors in the four layers of "Role assignment","Signing contract","Operational procedures" and "Losing capital investment" affect the progress of implementing the turn-key project in Taiwan. The results reveal that "Delay in payment" has the most negative influence with 15.62% weighing factor; "Latent risk" comes next with 11.14% weighing factor,and "Responsibility of construction company for project quality" is the third with 10.79% weighing factor.

Time series prediction using wavelet process neural network

In the real world, the inputs of many complicated systems are time-varying functions or processes. In order to predict the outputs of these systems with high speed and accuracy, this paper proposes a time series prediction model based on the wavelet process neural network, and develops the corresponding learning algorithm based on the expansion of the orthogonal basis functions. The effectiveness of the proposed time series prediction model and its learning algorithm is proved by the Macke-Glass time series prediction, and the comparative prediction results indicate that the proposed time series prediction model based on the wavelet process neural network seems to perform well and appears suitable for using as a good tool to predict the highly complex nonlinear time series.

Network Aggregation Process in Multilayer Air Transportation Networks

The air transportation network, one of the common multilayer complex systems, is composed of a collection of individual airlines, and each airline corresponds to a different layer. An important question is then how many airlines are really necessary to represent the optimal structure of a multilayer air transportation system. Here we take the Chinese air transportation network （CATN） as an example to explore the nature of multiplex systems through the procedure of network aggregation. Specifically, we propose a series of structural measures to characterize the CATN from the multilayered to the aggregated network level. We show how these measures evolve during the network aggregation process in which layers are gradually merged together and find that there is an evident structural transition that happened in the aggregated network with nine randomly chosen airlines merged, where the network features and construction cost of this network are almost equivalent to those of the present CATN with twenty-two airlines under this condition. These findings could shed some light on network structure optimization and management of the Chinese air transportation system.

A Novel Features Prioritization Mechanism for Controllers in Software-Defined Networking

The controller in software-defined networking(SDN)acts as strategic point of control for the underlying network.Multiple controllers are available,and every single controller retains a number of features such as the OpenFlow version,clustering,modularity,platform,and partnership support,etc.They are regarded as vital when making a selection among a set of controllers.As such,the selection of the controller becomes a multi-criteria decision making(MCDM)problem with several features.Hence,an increase in this number will increase the computational complexity of the controller selection process.Previously,the selection of controllers based on features has been studied by the researchers.However,the prioritization of features has gotten less attention.Moreover,several features increase the computational complexity of the selection process.In this paper,we propose a mathematical modeling for feature prioritization with analytical network process(ANP)bridge model for SDN controllers.The results indicate that a prioritized features model lead to a reduction in the computational complexity of the selection of SDN controller.In addition,our model generates prioritized features for SDN controllers.

Improving Refinery Profits via Fine Management of Hydrogen Networks

Hydrogen network management is important to refineries. Various systematic management techniques have been developed to improve the efficiency of refinery hydrogen networks. However, existing methods all treat the hydrogen network separately. The tradeoff between hydrogen network cost and oil processing network benefit has not been explored in the hydrogen network management yet. A novel sensitivity analysis scheme is presented to take oil processing network into consideration. Oil processing unit which is sensitive to both oil processing networks and hydrogen networks is identified first. Then, sensitivity analysis of the unit around the operating point of oil processing networks and hydrogen networks is carried out. Finally, the overall optimal operating condition is obtained. An example of a real Chinese refinery demonstrates the effectiveness of the proposed analysis method.

Step-wise synthesis of work exchange networks involving heat integration based on the transshipment model

Due to the deterioration of serious energy dilemma,energy-conservation and emission–reduction have been the strategic target in the past decades,thus people have identified the vital importance of higher energy efficiency and the influence of lower carbon development.Since work exchange network is a significant part of energy recovery system,its optima design will have dramatically significant effect on energy consumption reduction in chemical process system.With an extension of the developed transshipment model in isothermal process,a novel step-wise methodology for synthesis of direct work exchange network(WEN)in adiabatic process involving heat integration is first proposed in this paper,where a nonlinear programming(NLP)model is formulated by regarding the minimum utility consumption as objective function and optimizing the initial WEN in accordance with the presented matching rules to get the optimized WEN configuration at first.Furthermore,we focus on the work exchange network synthesis with heat integration to attain the minimal total annual cost(TAC)with the introduction of heat-exchange equipment that is achieved by the following strategies in sequence:introducing heat-exchange equipment directly,adjusting the work quantity of the adjacent utility compressors or expanders,and approximating upper/lower pressure limits consequently to obtain considerable cost savings of expanders or compressors and work utility.Finally,a case taken from the literature is studied to illustrate the feasibility and effectiveness of the proposed method.

Evolution Handoff Strategy for Real-Time Video Transmission over Practical Cognitive Radio Networks

The transmission delay of realtime video packet mainly depends on the sensing time delay(short-term factor) and the entire frame transmission delay(long-term factor).Therefore,the optimization problem in the spectrum handoff process should be formulated as the combination of microscopic optimization and macroscopic optimization.In this paper,we focus on the issue of combining these two optimization models,and propose a novel Evolution Spectrum Handoff(ESH)strategy to minimize the expected transmission delay of real-time video packet.In the microoptimized model,considering the tradeoff between Primary User's(PU's) allowable collision percentage of each channel and transmission delay of video packet,we propose a mixed integer non-linear programming scheme.The scheme is able to achieve the minimum sensing time which is termed as an optimal stopping time.In the macro-optimized model,using the optimal stopping time as reward function within the partially observable Markov decision process framework,the EHS strategy is designed to search an optimal target channel set and minimize the expected delay of packet in the long-term real-time video transmission.Meanwhile,the minimum expected transmission delay is obtained under practical cognitive radio networks' conditions,i.e.,secondary user's mobility,PU's random access,imperfect sensing information,etc..Theoretical analysis and simulation results show that the ESH strategy can effectively reduce the transmission delay of video packet in spectrum handoff process.

Concurrent Material Selection of Natural Fibre Filament for Fused Deposition Modeling Using Integration of Analytic Hierarchy Process/Analytic Network Process

The employment of natural fibres in fused deposition modeling has raised much attention from researchers in finding a suitable formulation for the natural fibre composite filaments.Moreover,selection of suitable natural fibres for fused deposition modeling should be performed before the development of the composites.It could not be performed without identifying selection criteria that comprehend both materials and fused deposition modeling process requirements.Therefore,in this study,integration of the Analytic Hierarchy Process(AHP)/Analytic Network Process(ANP)has been introduced in selecting the natural fibres based in different clusters of selection concurrently.The selection process has been performed based on the interdependency among the selection criteria.Pairwise comparison matrices are constructed based on AHP’s hierarchical model and super matrices are constructed based on the ANP’s network model.As a result,flax fibre has ranked at the top of the selection by scored 19.5%from the overall evaluation.Flax fibre has excellent material properties and been found in various natural fibre composite applications.Further investigation is needed to study the compatibility of this fibre to be reinforced with a thermoplastic polymer matrix to develop a resultant natural fibre composite filament for fused deposition modeling.

Phase Transition in Recovery Process of Complex Networks

The dynamic characteristic of complex network failure and recovery is one of the main research topics in complex networks. Real world systems such as traffic jams and Internet recovery could be described by the complex network theory. We propose a model to study the recovery process in complex networks. Two different recovery mechanisms are considered in three kinds of networks： external recovery and internal recovery. By simulating the process of the nodes recovery in networks, it is found that the system exhibits the feature of first-order phase transition only when the external recovery is considered. Internal recovery cannot induce such a kind of transitions. As external recovery and internal recovery coexist on networks, the systems will retain the most efficient part of external recovery and internal recovery. Meanwhile, a hysteresis could be observed when increasing or decreasing the failure probability. Finally, a largest degree node protection strategy is proposed for improving the robustness of networks.

Deep Learning Applied to Computational Mechanics:A Comprehensive Review,State of the Art,and the Classics

Three recent breakthroughs due to AI in arts and science serve as motivation:An award winning digital image,protein folding,fast matrix multiplication.Many recent developments in artificial neural networks,particularly deep learning(DL),applied and relevant to computational mechanics(solid,fluids,finite-element technology)are reviewed in detail.Both hybrid and pure machine learning(ML)methods are discussed.Hybrid methods combine traditional PDE discretizations with ML methods either(1)to help model complex nonlinear constitutive relations,(2)to nonlinearly reduce the model order for efficient simulation(turbulence),or(3)to accelerate the simulation by predicting certain components in the traditional integration methods.Here,methods(1)and(2)relied on Long-Short-Term Memory(LSTM)architecture,with method(3)relying on convolutional neural networks.Pure ML methods to solve(nonlinear)PDEs are represented by Physics-Informed Neural network(PINN)methods,which could be combined with attention mechanism to address discontinuous solutions.Both LSTM and attention architectures,together with modern and generalized classic optimizers to include stochasticity for DL networks,are extensively reviewed.Kernel machines,including Gaussian processes,are provided to sufficient depth for more advanced works such as shallow networks with infinite width.Not only addressing experts,readers are assumed familiar with computational mechanics,but not with DL,whose concepts and applications are built up from the basics,aiming at bringing first-time learners quickly to the forefront of research.History and limitations of AI are recounted and discussed,with particular attention at pointing out misstatements or misconceptions of the classics,even in well-known references.Positioning and pointing control of a large-deformable beam is given as an example.

TVAR Time-frequency Analysis for Non-stationary Vibration Signals of Spacecraft

Predicting the time-varying auto-spectral density of a spacecraft in high-altitude orbits requires an accurate model for the non-stationary random vibration signals with densely spaced modal frequency. The traditional time-varying algorithm limits prediction accuracy, thus affecting a number of operational decisions. To solve this problem, a time-varying auto regressive （TVAR） model based on the process neural network （PNN） and the empirical mode decomposition （EMD） is proposed. The time-varying system is tracked on-line by establishing a time-varying parameter model, and then the relevant parameter spectrum is obtained. Firstly, the EMD method is utilized to decompose the signal into several intrinsic mode functions （IMFs）. Then for each IMF, the PNN is established and the time-varying auto-spectral density is obtained. Finally, the time-frequency distribution of the signals can be reconstructed by linear superposition. The simulation and the analytical results from an example demonstrate that this approach possesses simplicity, effectiveness, and feasibility, as well as higher frequency resolution.

The Impact of Check Bits on the Performance of Bloom Filter

Bloom filter(BF)is a space-and-time efficient probabilistic technique that helps answermembership queries.However,BF faces several issues.The problems with traditional BF are generally two.Firstly,a large number of false positives can return wrong content when the data is queried.Secondly,the large size of BF is a bottleneck in the speed of querying and thus uses large memory.In order to solve the above two issues,in this article,we propose the check bits concept.From the implementation perspective,in the check bits approach,before saving the content value in the BF,we obtain the binary representation of the content value.Then,we take some bits of the content value,we call these the check bits.These bits are stored in a separate array such that they point to the same location as the BF.Finally,the content value(data)is stored in the BF based on the hash function values.Before retrieval of data from BF,the reverse process of the steps ensures that even if the same hash functions output has been generated for the content,the check bits make sure that the retrieval does not depend on the hash output alone.This thus helps in the reduction of false positives.In the experimental evaluation,we are able to reduce more than 50%of false positives.In our proposed approach,the false positives can still occur,however,false positives can only occur if the hash functions and check bits generate the same value for a particular content.The chances of such scenarios are less,therefore,we get a reduction of approximately more than 50%false positives in all cases.We believe that the proposed approach adds to the state of the art and opens new directions as such.

GIS-based landslide susceptibility modeling:A comparison between fuzzy multi-criteria and machine learning algorithms

Hazards and disasters have always negative impacts on the way of life.Landslide is an overwhelming natural as well as man-made disaster that causes loss of natural resources and human properties throughout theworld.The present study aimed to assess and compare the prediction efficiency of different models in landslide susceptibility in the Kysuca river basin,Slovakia.In this regard,the fuzzy decision-making trial and evaluation laboratory combining with the analytic network process(FDEMATEL-ANP),Naïve Bayes(NB)classifier,and random forest(RF)classifier were considered.Initially,a landslide inventory map was produced with 2000 landslide and nonlandslide points by randomly dividedwith a ratio of 70%:30%for training and testing,respectively.The geospatial database for assessing the landslide susceptibility was generated with the help of 16 landslide conditioning factors by allowing for topographical,hydrological,lithological,and land cover factors.The ReliefF methodwas considered for determining the significance of selected conditioning factors and inclusion in the model building.Consequently,the landslide susceptibility maps(LSMs)were generated using the FDEMATEL-ANP,Naïve Bayes(NB)classifier,and random forest(RF)classifier models.Finally,the area under curve(AUC)and different arithmetic evaluation were used for validating and comparing the results and models.The results revealed that random forest(RF)classifier is a promising and optimum model for landslide susceptibility in the study area with a very high value of area under curve(AUC=0.954),lower value of mean absolute error(MAE=0.1238)and root mean square error(RMSE=0.2555),and higher value of Kappa index(K=0.8435)and overall accuracy(OAC=92.2%).

Portfolio selection: a fuzzy-ANP approach

This study developed specific criteria and a fuzzy analytic network process(FANP)to assess and select portfolios on the Tehran Stock Exchange(TSE).Although the portfolio selection problem has been widely investigated,most studies have focused on income and risk as the main decision-making criteria.However,there are many other important criteria that have been neglected.To fill this gap,first,a literature review was conducted to determine the main criteria for portfolio selection,and a Likert-type questionnaire was then used to finalize a list of criteria.Second,the finalized criteria were applied in an FANP to rank 10 different TSE portfolios.The results indicated that profitability,growth,market,and risk are the most important criteria for portfolio selection.Additionally,portfolios 6,7,2,4,8,1,5,3,9,and 10(A6,A7,A2,A4,A8,A1,A5,A3,A9,and A10)were found to be the best choices.Implications and directions for future research are discussed.

Comprehensive Evaluation of Large Infrastructure Project Plan with ANP

Analytic Network Process(ANP) was used in comprehensive evaluation of large infrastructure project plan. An model including social economy, ecological environment and resources was established with ANP method. The evaluation pattern of hierarchy structure and comprehensive evaluation method for quantity and quality of large infrastructure project were put forward, which provides an effective way to evaluate the large infrastructure project plan. Quantitative analysis indicated that the internal dependence relation of hierarchy structure has influence on ranking results of plan. It is suggested that considering the internal relation can helps managers make effective decisions.

A model of supplying poplar wood for Iranian paper & wood factories

The objective of this research is to design a method for an appropriate alternative to supply poplar wood as raw material for wood and paper factories in Iran. Due to the destruction of the forests and lack of proper plantation, replacement of the forest wood by the fast growing wood is vital to satisfy all requirements of these factories. A hierarchy was used to prioritize benefits, opportunities, costs and risks （BOCR） using the Analytic Hierarchy Process （AHP） ratings approach. To evaluate the ＂control criteria＂ of the system, a control hierarchy was also created and prioritized by applying the Analytic Network Process （ANP）. A total of four major control criteria in the system are prioritized where each one controls a network structure evaluated by using ANE The final synthesis results of the system showed that internal poplar tree farming supplied by the forest product factories was the best choice among three potential alternatives （factory procurement, external procurement and mix procurement）.

Optimization of clay material mixture ratio and filling process in gypsum mine goaf

Because there is neither waste rock nor mill tailings in the gypsum mine, and the buildings on the goaf of gypsum mine are needed to be protected, the research proposed the scheme of the clay filling technology. Gypsum, cement, lime and water glass were used as adhesive, and the strength of different material ratios were investigated in this study. The influence factors of clay strength were obtained in the order of cement, gypsum, water glass and lime. The results show that the cement content is the determinant influence factor, and gypsum has positive effects, while the water glass can enhance both clay strength and the fluidity of the filing slurry. Furthermore, combining chaotic optimization method with neural network, the optimal ratio of composite cementing agent was obtained. The results show that the optimal ratio of water glass, cement, lime and clay (in quality) is 1.17:6.74:4.17:87.92 in the process of bottom self-flow filling, while the optimal ratio is 1.78:9.58:4.71:83.93 for roof-contacted filling. A novel filling process to fill in gypsum mine goaf with clay is established. The engineering practice shows that the filling cost is low, thus, notable economic benefit is achieved.

Dynamic performance management system

An integrated, efficient and effective performance management system, ＂dynamic performance management system＂, is presented, which covers the entire performance management process including measures design, analysis, and dynamic update. The analysis of performance measures using causal loop diagrams, qualitative inference and analytic network process is mainly discussed. A real world case study is carried out throughout the paper to explain how the framework works. A software tool for DPMS, Performance Analyzer, is also introduced.