Delay Trigger in the Application of Network Testing System

The researchers who study the local area network( LAN) eXtension for instrumentation( LXI) instrument are pursuing instrument's high-precision synchronization. In the paper,three synchronization modes were discussed which were clock synchronization, trigger synchronization, and response synchronization. Synchronous process between LXI instruments was analyzed and each time factor affecting the synchronization accuracy was discussed. On the basis of the analysis,it can be found that delay trigger plays an important role in the network testing system's synchronization. Delay trigger can produce an additional time interval to correct the difference of each LXI instrument's response time. Then,a method to realize the delay trigger was introduced. Delay time can be adjustable according to the actual demand. Finally,synchronization accuracy of network testing system can reach nanoseconds.

Research on Testing Technologies of Network System in Smart Substations

The network structures of smart substations and the characteristics of industrial Ethernet switches are analyzed.The testing technologies of network systems based on smart substations are specifically elaborated.A viewpoint is proposed that special testing policy&method of smart substation networks should be followed,so that the results can reveal the real network data exchange performance of the whole station.This view ensures the safety and stability of smart substations and lays a foundation for future upgrades and expansions.

Networked collaborative pseudo-dynamic testing of a multi-span bridge based on NetSLab

Modem dynamic tests such as networked collaborative pseudo-dynamic testing （PDT） provide new tools to study the dynamic performance of large and complex structures. In this paper, several networked collaborative PDT systems established in China and abroad are introduced, including a detailed description of the first networked collaborative platform that involved the construction of a standardized demonstration procedure for networked collaborative PDT. The example is a multi-span bridge with RC piers retrofitted by FRP, and a networked structural laboratory （NetSLab） platform is used to link distributed laboratories located at several universities together. Substructure technology is also used in the testing. The characteristics, resource sharing and collaborative work of NetSLab are described, and the results illustrate that use of the NetSLab is feasible for studying the dynamic performance of multi-span bridge structures.

<i>Inmap-t</i>: Leveraging TTCN-3 to Test the Security Impact of Intra Network Elements

This paper rejuvenates the notion of conformance testing in order to assess the security of networks. It leverages the Testing and Test Control Notation Version 3 (TTCN-3) by applying it to a redefined notion of System under Test (SUT). Instead of testing, as it is classically done, a software/firmware/ hardware element, an intangible object, namely the network, is tested in order to infer some of its security properties. After a brief introduction of TTCN-3 and Titan, its compilation and execution environment, a couple of use cases are provided to illustrate the feasibility of the approach. The pros and cons of using TTCN-3 to implement a scalable and flexible network testing environment are discussed.

Application of artificial neural networks for predicting the impact of rolling dynamic compaction using dynamic cone penetrometer test results

Rolling dynamic compaction(RDC),which involves the towing of a noncircular module,is now widespread and accepted among many other soil compaction methods.However,to date,there is no accurate method for reliable prediction of the densification of soil and the extent of ground improvement by means of RDC.This study presents the application of artificial neural networks(ANNs) for a priori prediction of the effectiveness of RDC.The models are trained with in situ dynamic cone penetration(DCP) test data obtained from previous civil projects associated with the 4-sided impact roller.The predictions from the ANN models are in good agreement with the measured field data,as indicated by the model correlation coefficient of approximately 0.8.It is concluded that the ANN models developed in this study can be successfully employed to provide more accurate prediction of the performance of the RDC on a range of soil types.

Load Reduction Test Method of Similarity Theory and BP Neural Networks of Large Cranes

Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.

Data Consistency Tests through the Use of Neural Networks and Virial Equation. Application of the Proposed Methodology to Critical Study of Density Data

This paper focuses on a very important point which consists in evaluating experimental data prior to their use for chemical process designs. Hexafluoropropylene P, ρ, T data measured at 11 temperatures from 263 to 362 K and at pressures up to 10 MPa have been examined through a consistency test presented herein and based on the use of a methodology implying both neural networks and Virial equation. Such a methodology appears as very powerful to identify erroneous data and could be conveniently handled for quick checks of databases previously to modeling through classical thermodynamic models and equations of state. As an application to liquid and vapor phase densities of hexafluoropropylene, a more reliable database is provided after removing out layer data.

基于机器学习与DBN网络的网络入侵检测方法研究

随着计算机网络的发展,网络入侵的情况也越来越严重。传统网络入侵检测方法存在检测效率低、误判率高的情况,为了解决这些问题,提出了一种基于支持向量机的深度置信网络(SVM-DBN)的入侵检测方法。通过对支持向量机(SVM)进行优化,将支持向量机与深度信念网络(DBN)融合,利用SVM、DBN与SVM-DBN在网络入侵数据集中进行对比。结果表明,SVM-DBN算法的误差率最低,比DBN和SVM的误差率平均值分别低了8.95%,12.70%,且SVM-DBN算法在训练次数为140次时最大绝对百分比误差为4.8%,均优于对比方法。这说明SVM-DBN网络能够有效地提高网络入侵检测的精度和效率。

Test Effort Estimation Using Neural Network

In software industry the major problem encountered during project scheduling is in deciding what proportion of the resources has allocated to the testing phase. In general it has been observed that about 40%-50% of the resources need to be allocated to the testing phase. However it is very difficult to predict the exact amount of effort required to be allocated to testing phase. As a result the project planning goes haywire. The project which has not been tested sufficiently can cause huge losses to the organization. This research paper focuses on finding a method which gives a measure of the effort to be spent on the testing phase. This paper provides effort estimates during pre-coding and post-coding phases using neural network to predict more accurately.

Development Methodologies for Network Softwarization: A Comparison of DevOps, NetOps, and Verification

This white paper explores three popular development methodologies for network softwarization: DevOps, NetOps, and Verification. The paper compares and contrasts the strengths and weaknesses of each approach and provides recommendations for organizations looking to adopt network softwarization.

Quantitative Interpretation for the Magnetic Flux Leakage Testing Data Based on Neural Network

In order to interpret the magnetic flux leakage (MFL) testing data quantitatively and size the defects accurately, some defect profiles inversion methods from the MFL signals are studied on the basis of the neural network.Because the wavelet ba- sis function neural network (WBFNN) has good accuracy in the forward calculation and the radial basis function neural network (RBFNN) has reliable precision in the inversion modeling respectively,a new neural network scheme combining WBFNN and RBFNN is presented to solve the nonlinear inversion problem for the MFL data and reconstruct the defect shapes.And such details as the choice of wavelet basis function,the initialization of the weight value and the input normalization are analyzed,the train- ing and testing algorithm for the network are also studied.The inversion results demonstrate that the proposed network scheme has good reliability to interpret the MFL data for some defects.

基于模糊综合分析法的引调水工程水质响应关系分析

为提升引调水工程的环境改善效果,须对水体的自身连通水平、水质现状、水环境主要影响因子进行分析。以太湖流域跃进联圩为研究对象,利用图论连通度理论对研究区域静态基流连通性进行评价,探索圩内水系连通性的空间差异及变化特性。同时,开展短期引调水实验,结合模糊综合分析法评价引调水带来的圩内水质变化情况及规律,研究圩内水环境和水系连通性的响应关系。结果表明,模糊综合评价法在引调水环境改善分析中具有适用性,可实现对圩内各监测点位水质变化的全面分析;水体流动性是影响圩区内水质的重要环境因素,高锰酸盐指数是导致圩内水质恶化的主要影响因子。引调水工程对圩区水环境具有一定的持续改善性作用,但对基流连通性较差的区域,改善效果有限。

基于时变传染网络和分位数Granger因果检验的系统性风险传染研究

基于18个经济体760家金融机构SRISK系统性风险数据,采用时变参数向量自回归模型和广义方差分解法测度全球系统性风险的时变传染网络,进而采用分位数Granger因果检验考察各经济体对中国高分位段系统性风险的影响。研究结果表明,结合SRISK数据和时变传染网络能有效识别重大风险事件的发生;发达和新兴经济体均会产生风险净输出效应,且会通过直接输出或香港地区间接输出风险至中国内地;在全样本与2008年金融危机、欧债危机、中美贸易战和新冠疫情重大风险事件期间,中国皆为风险净溢入国且新冠疫情期间溢入效应达历史最高;美英两国在重大风险事件期间均对中国高分位段系统性风险产生显著影响,新冠疫情期间中国高分位段系统性风险遭受外部冲击的形势最为严峻。

猕猴桃便携式无损检测仪影响因素及其精度校准分析

为探究产地、成熟度对便携式可溶性固形物无损检测精度的影响,以同一品种3个产地的猕猴桃为试材,分别采用便携式无损检测仪和常规有损检测仪对其可溶性固形物含量进行测定和比较,并运用人工神经网络对其进行分析。结果表明,在使用便携式无损检测仪对猕猴桃可溶性固形物检测时,3个产地的无损检测R2分别为0.26、0.52、0.61,成熟度会对其检测精度造成一定影响,但在不同产地间没有稳定、统一的规律;基于人工神经网络学习、建模产生的随机预测值可将R2提高5%~49%。因此,可利用预测值来作为中间校准程序,以辅助提高便携式无损检测精度。

卷积神经网提取特征的红外与可见光图像融合研究

当前红外与可见光图像融合存在一些难题,导致前红外与可见光图像精度低,误差大,而且前红外与可见光图像融合效率低,为了解决当前红外与可见光图像过程存在的问题,设计了基于卷积神经网提取特征的红外与可见光图像融合方法。首先分别采集对象的红外图像和可见光图像,并对原始图像去噪等预处理,改善图像的质量,然后采用卷积神经网络提取红外与可见光图像融合特征,根据特征得到红外与可见光图像融合结果,最后进行了仿真实验,结果表明本方法红外与可见光图像的融合结果的融合比率提高了0.24,平均梯度值提升了0.22,图像融合质量更高。

变化环境下河南省水资源情势与驱动力分析

为了解河南省水资源利用现状及趋势,为水资源管理部门提供参考,以应对变化环境下未来水资源供需所面临的挑战,基于河南省1999—2022年有关气象水文资料及水资源统计资料,采用统计分析、Mann-Kendall趋势检验及BP神经网络方法,对河南省水资源演变情势及其驱动力进行分析研究。结果表明:河南省降水量及水资源总量年际变化较大,整体不太稳定且丰枯水年交替频繁,供用水量呈现增长趋势但增速有所放缓;全省降水量、地下水资源量及水资源总量呈现不显著的减少趋势,地表水量及耗水量呈现不显著的增加趋势,供用水量呈现显著的增加趋势;降水量、年平均气温及下垫面的变化都是影响河南省水资源总量变化的重要因素。

基于先验知识的弓网接触电阻预测模型精度提升方法

高速列车的运行实践表明,随着运行速度提高,受电弓与接触导线分离的可能性越大,越容易产生弓网电弧。导致电弧产生的因素很多,但最终都归结到滑板与接触网的接触电阻上。首先利用滑动电接触实验机,研究了波动载荷、滑动速度和接触电流对接触电阻的影响,并进一步结合表面形貌特征,分析了磨损机制、电弧放电与接触电阻演变规律之间的关系。其次为了预测不同工况下的接触电阻,建立了径向基(RBF)神经网络回归模型,通过在模型训练中融入先验知识和采用改进的食肉植物优化算法(ICPA)优化RBF神经网络超参数,提升弓网接触电阻预测模型的精度。有、无先验知识的ICPA-RBF模型预测性能对比仿真结果表明,两类先验知识分别有助于提高模型的收敛速度和预测精度。最后采用假设检验验证了模型的有效性。

基于GA-BP神经网络的大型客机气流角估计方法

为了解决硬件冗余难以克服的气流角传感器共因故障问题,进一步提高飞机气流角信号的可靠性,研究了基于GABP神经网络的气流角估计方法。通过BP神经网络融合姿态角、加速度、风速等参数来实现不依赖气流角传感器的气流角估计;引入遗传算法对神经网络权值和阈值进行全局优化,提高估计精度;对某大型客机的试飞数据预处理后用于模型的训练和测试。仿真结果表明,训练完成的GA-BP神经网络模型对气流角的估计值贴近实际值,稳定性和精度明显高于BP神经网络。上述方法给飞机增加一个余度的气流角信号,可用于传感器故障时为飞机提供可靠的气流角信号。