Investigating Optical Transport Network Performance:A Recurrence Plot Approach

In future optical transport networks,lightpath performance analysis is of great practical significance for fully automated management.In general,the quality of transmission(QoT)of lightpaths,measured by optical quality factor or optical signal-to-noise ratio,has a complex time-varying process,along with the interactions of the other lightpath state parameters(LSPs),such as transmit power,chromatic dispersion,polarization mode dispersion.Current studies are mostly focused on lightpath QoT estimation,but ignoring lightpath-level data analytics.In this case,our article proposes a novel lightpath performance analysis method considering recurrence plot(RP)and cross recurrence plot(CRP).Firstly,we give a detailed interpretation on the recurrence patterns of LSPs via a qualitative 2-D RP representation and its quantitative measure.It can potentially enable the accurate and fast lightpath failure detection with a low computational burden.On the other hand,CRP is devoted to modeling the relationships between lightpath QoT and LSPs,and the correlation degree is determined by a geometric mean of multiple indexes of cross recurrence quantification analysis.From the view of application,such CRP analysis can provide the effective knowledge sharing to guarantee more credible QoT prediction.Extensive experiments on a real-world optical network dataset have clearly demonstrated the effectiveness of our proposal.

Regulating the non-effective carriers transport for high-performance lithium metal batteries

The absence of control over carriers transport during electrochemical cycling,accompanied by the deterioration of the solid electrolyte interphase(SEI)and the growth of lithium dendrites,has hindered the development of lithium metal batteries.Herein,a separator complexion consisting of polyacrylonitrile(PAN)nanofiber and MIL-101(Cr)particles prepared by electrospinning is proposed to bind the anions from the electrolyte utilizing abundant effective open metal sites in the MIL-101(Cr)particles to modulate the transport of non-effective carriers.The binding effect of the PANM separator promotes uniform lithium metal deposition and enhances the stability of the SEI layer and long cycling stability of ultra-high nickel layered oxide cathodes.Taking PANM as the Li||NCM96 separator enables high-voltage cycling stability,maintaining 72%capacity retention after 800 cycles at a charging and discharging rate of 0.2 C at a cut-off voltage of 4.5 V and 0°C.Meanwhile,the excellent high-rate performance delivers a specific capacity of 156.3 mA h g^(-1) at 10 C.In addition,outstanding cycling performance is realized from−20 to 60°C.The separator engineering facilitates the electrochemical performance of lithium metal batteries and enlightens a facile and promising strategy to develop fast charge/discharge over a wide range of temperatures.

Coordinated Voltage Control of Distribution Network ConsideringMultiple Types of Electric Vehicles

The couple between the power network and the transportation network(TN)is deepening gradually with the increasing penetration rate of electric vehicles(EV),which also poses a great challenge to the traditional voltage control scheme.In this paper,we propose a coordinated voltage control strategy for the active distribution networks considering multiple types of EV.In the first stage,the action of on-load tap changer and capacitor banks,etc.,are determined by optimal power flow calculation,and the node electricity price is also determined based on dynamic time-of-use tariff mechanism.In the second stage,multiple operating scenarios of multiple types of EVs such as cabs,private cars and buses are considered,and the scheduling results of each EV are solved by building an optimization model based on constraints such as queuing theory,Floyd-Warshall algorithm and traffic flow information.In the third stage,the output power of photovoltaic and energy storage systems is fine-tuned in the normal control mode.The charging power of EVs is also regulated in the emergency control mode to reduce the voltage deviation,and the amount of regulation is calculated based on the fair voltage control mode of EVs.Finally,we test the modified IEEE 33-bus distribution system coupled with the 24-bus Beijing TN.The simulation results show that the proposed scheme can mitigate voltage violations well.

Internet of Things Based Solutions for Transport Network Vulnerability Assessment in Intelligent Transportation Systems

Intelligent Transportation System(ITS)is essential for effective identification of vulnerable units in the transport network and its stable operation.Also,it is necessary to establish an urban transport network vulnerability assessment model with solutions based on Internet of Things(IoT).Previous research on vulnerability has no congestion effect on the peak time of urban road network.The cascading failure of links or nodes is presented by IoT monitoring system,which can collect data from a wireless sensor network in the transport environment.The IoT monitoring system collects wireless data via Vehicle-to-Infrastructure(V2I)channels to simulate key segments and their failure probability.Finally,the topological structure vulnerability index and the traffic function vulnerability index of road network are extracted from the vulnerability factors.The two indices are standardized by calculating the relative change rate,and the comprehensive index of the consequence after road network unit is in a failure state.Therefore,by calculating the failure probability of road network unit and comprehensive index of road network unit in failure state,the comprehensive vulnerability of road network can be evaluated by a risk calculation formula.In short,the IoT-based solutions to the new vulnerability assessment can help road network planning and traffic management departments to achieve the ITS goals.

URBAN GROWTH, TRANSPORTATION SYSTEM AND COMMERCIALNETWORK OF BEIJING

In this afticle, three uopt problems on the developlnent and plabong of Beijing metropolis are expounded (1) Having analyzed the process of urbanlzation dunng 45 years, the autihor divides it into three Stages :city expansion, qrban sprawl and fonmation of centnpotal urban nngr. Then a rank-number-size law is pLif fotward to predict the development and allocation of satellite towns (2) Having looked back on the change of urban transpoftation nforork, the atlthor points out its merits and demerits.According to the increases of traffic flow, improving measures for the urban road systems are demonstrated. (3) Having reviewed the llistory of commercial distnbution and referred to previous lnodels, the author roprds the spatial structure of business as a combined network from central place and idealized stnucture of lnetropolitan area. The trade and service orgaluzation in n1ain urban area and peripheral zone can be planned with defferent ways. The atlthor predicts a rational network of commerce and service of Beijing with a strong BCD Which is accepted by some trade authorities

Dependability in Future Battle Network System —Transport Layer Ability to Maintain Quality of Service

Modernization of armies is a constant process and is driven by intuitive fact that those who do not modernize will become extinct. In last five decades, the development of modern armies has taken place around Colonel John Boyd’s theory of OODA loop that deals with information superiority. Building a robust, mobile and capable network that could provide for novel appliances and information superiority is the main challenge which modernizers are facing. Network, suitable for future combat operations, and able to transport a vast amount of information on a battlefield, is expensive to build. Every mistake in design and the need to correct those mistakes could halt development in an army for years. Therefore, system dependability analysis during system design phase is needed. In this report, the concept of a future Battle Network System is described. The Report evaluates operational environment of BNS and possible failure reasons of the service, and illustrates the change in BNS Quality of Service due to probable transport layer errors. This paper describes the method of testing the concept of proposed network systems on the drawing board, and emphasizes design points for a new system. Nevertheless, the proposed method is by no means conclusive. Rather, it describes an engineering approach to define the main problems while creating MANET-based networking systems.

A Review on Mobile and Sensor Networks Innovations in Intelligent Transportation Systems

Rapid developments of mobile technologies, data acquisition and big data analytics, and their integration with critical application domains such as transportation systems have the potential to produce more efficient, real-time, intelligent and safe transportation infrastructure. To increase the quality of transportation services, wireless sensor networks, mobile phones, crowd sourcing, RFID and Bluetooth technologies are being used. We surveyed innovations that were transformed from ideas in research labs into commercial systems in practical use. In this paper, we present some innovative mobile technologies, services and platforms that are being used in modern transportation applications including traffic data acquisition, traffic management and control, route optimizations, infrastructure redesign, road safety and enhancing user experience.

Effect of seismic retrofit of bridges on transportation networks

The objective of this research is to determine the effect earthquakes have on the performance of transportation network systems.To do this,bridge fragility curves,expressed as a function of peak ground acceleration(PGA)and peak ground velocity(PGV),were developed.Network damage was evaluated under the 1994 Northridge earthquake and scenario earthquakes.A probabilistic model was developed to determine the effect of repair of bridge damage on the improvement of the network performance as days passed after the event.As an example,the system performance degradation measured in terms of an index,'Drivers Delay,'is calculated for the Los Angeles area transportation system,and losses due to Drivers Delay with and without retrofit were estimated.

Spatiotemporal evolution of land transportation networks and accessibility in inland mountainous areas 1917-2017:A case study of Southwest China

Located in the western hinterland,Southwest China is a typical mountainous area covered by plateaus,mountains and hills.Its ruggedness hinders regional internal and external connections,and its poor transportation infrastructure has long constrained the socioeconomic development of Southwest China.Based on the GIS transportation database,this paper explored the spatiotemporal evolution and characteristics of the land transportation networks and the accessibility of Southwest China from 1917 to 2017.Regional accessibility in Southwest China has significantly improved,and transportation infrastructure has gradually integrated the transportation circles of the52 central cities.The transportation network has followed an evolutionary process from a"hub-spoke pattern"to a"network pattern",while the construction of a high-speed railway(HSR)has brought about significant spatial polarization.We argue that innovation in transportation technology is one of the most effective factors for promoting a significant change in regional accessibility.In addition,the spatial distribution and evolution of accessibility in Southwest China presents a verticalcharacteristic that distinguishes it from the plains,as the spillover effects of new transportation infrastructure on accessibility improvement are partly offset by the mountainous terrain.Additionally,in Southwest China,there is significant"path dependence"in the evolution of the transportation network,since a large portion of the population is concentrated along transportation corridors in mountainous areas.

Cyber-physical-social System in Intelligent Transportation

A cyber-physical system(CPS) is composed of a physical system and its corresponding cyber systems that are tightly fused at all scales and levels.CPS is helpful to improve the controllability,efficiency and reliability of a physical system,such as vehicle collision avoidance and zero-net energy buildings systems.It has become a hot R&D and practical area from US to EU and other countries.In fact,most of physical systems and their cyber systems are designed,built and used by human beings in the social and natural environments.So,social systems must be of the same importance as their CPSs.The indivisible cyber,physical and social parts constitute the cyber-physical-social system(CPSS),a typical complex system and it’s a challengeable problem to control and manage it under traditional theories and methods.An artificial systems,computational experiments and parallel execution(ACP) methodology is introduced based on which data-driven models are applied to social system.Artificial systems,i.e.,cyber systems,are applied for the equivalent description of physical-social system(PSS).Computational experiments are applied for control plan validation.And parallel execution finally realizes the stepwise control and management of CPSS.Finally,a CPSS-based intelligent transportation system(ITS) is discussed as a case study,and its architecture,three parts,and application are described in detail.

Flex Ethernet Technology and Application in 5G Mobile Transport Network

With the advent of 5G era,the rise of cloud services,virtual reality/virtual reality(AR/VR),vehicle networking and other technologies has put forward new requirements for the bandwidth and delay of the bearer network.Traditional Ethernet technology cannot meet the new requirements very well.Flex Ethernet(FlexE)technology has emerged as the times require.This paper introduces the background,standardization process,functional principle,application mode and technical advantages of FlexE technology,and finally analyses its application prospects and shortcomings in 5G mobile transport network.

An evolutionary model of urban bus transport network based on B-space

In this paper, an evolutionary model of bus transport network in B-space is developed. It includes the effect of the overlapping ratio of new route on network performance and overcomes the disadvantage, i.e. lack of economic consideration, in the evolutionary bus transport network model in P-space proposed by Chen et al （2007）. The degree distribution functions are derived by using the mean-field method and the master equation method, separately. The relationship between the new stop ratio of a route, λ, and the error in exponential of degree distribution function from the mean-field method is developed as ASlope= λ/（1 -λ） ＋ ln（1-λ）. Finally, the bus transport networks of Hangzhou and Nanjing are simulated by using this model, and the results show that some characteristic index values of the simulated networks are closer to the empirical data than those from Chen＇s model.

5G Flexible Optical Transport Networks with Large-Capacity, Low-Latency and High-Efficiency

The fifth generation(5G) of mobile communications are facing big challenges, due to the proliferation of diversified terminals and unprecedented services such as internet of things(IoT), high-definition videos, virtual/augmented reality(VR/AR). To accommodate massive connections and astonish mobile traffic, an efficient 5G transport network is required. Optical transport network has been demonstrated to play an important role for carrying 5G radio signals. This paper focuses on the future challenges, recent studies and potential solutions for the 5G flexible optical transport networks with the performances on large-capacity, low-latency and high-efficiency. In addition, we discuss the technology development trends of the 5G transport networks in terms of the optical device, optical transport system, optical switching, and optical networking. Finally, we conclude the paper with the improvement of network intelligence enabled by these technologies to deterministic content delivery over 5G optical transport networks.

Self-Organized Optimization of Transport on Complex Networks

We propose a self-organized optimization mechanism to improve the transport capacity of complex gradient networks. We find that, regardless of network topology, the congestion pressure can be strongly reduced by the self-organized optimization mechanism. Furthermore, the random scale-free topology is more efficient to reduce congestion compared with the random Poisson topology under the optimization mechanism. The reason is that the optimization mechanism introduces the correlations between the gradient field and the local topology of the substrate network. Due to the correlations, the cutoff degree of the gradient network is strongly reduced and the number of the nodes exerting their maximal transport capacity consumedly increases. Our work presents evidence supporting the idea that scale-free networks can efficiently improve their transport capacity by self- organized mechanism under gradient-driven transport mode.

Analysis of identification methods of key nodes in transportation network

The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be different.It is of practical significance to study the key nodes identification methods corresponding to various types of transportation networks.Based on the knowledge of complex networks,the metro networks and the bus networks are selected as the objects,and the key nodes are identified by the node degree identification method,the neighbor node degree identification method,the weighted k-shell degree neighborhood identification method(KSD),the degree k-shell identification method(DKS),and the degree k-shell neighborhood identification method(DKSN).Take the network efficiency and the largest connected subgraph as the effective indicators.The results show that the KSD identification method that comprehensively considers the elements has the best recognition effect and has certain practical significance.

Network Aggregation Process in Multilayer Air Transportation Networks

The air transportation network, one of the common multilayer complex systems, is composed of a collection of individual airlines, and each airline corresponds to a different layer. An important question is then how many airlines are really necessary to represent the optimal structure of a multilayer air transportation system. Here we take the Chinese air transportation network （CATN） as an example to explore the nature of multiplex systems through the procedure of network aggregation. Specifically, we propose a series of structural measures to characterize the CATN from the multilayered to the aggregated network level. We show how these measures evolve during the network aggregation process in which layers are gradually merged together and find that there is an evident structural transition that happened in the aggregated network with nine randomly chosen airlines merged, where the network features and construction cost of this network are almost equivalent to those of the present CATN with twenty-two airlines under this condition. These findings could shed some light on network structure optimization and management of the Chinese air transportation system.

OAM Technology of Packet Transport Network

The Packet Transport Network(PTN) technology includes Transport Multi-Protocol Label Switching(T-MPLS) and Provider Backbone Transport(PBT).T-MPLS is the simplified and reformed Multi-Protocol Label Switching(MPLS).It drops MPLS’connectionless features and its transport-unrelated forwarding processing,but adds the network model of the transport layer,protection switching and Operation,Administration and Maintenance(OAM) functionality.PBT enforces both OAM and protection functions,adds Time Division Multiplexing(TDM) business simulation and clock functions,and strengthens multi-service support capability.But PBT has no functions of traditional Ethernet address learning,address broadcast and Spanning Tree Protocol(STP).Both T-MPLS and PBT can well satisfy the requirements of packet transport.Compared to PBT,T-MPLS has better OAM functions.

STUDY ON DEVELOPMENT STRATEGY OF SHIPPING CENTERS AND TRANSPORTATION NETWORKS IN THE YELLOW SEA RIM

It is very important to establish cooperative mechanism to guarantee all members to develop their economies in the Yellow Sea Rim. In this paper, th e development strategies of shipping centers and transportation network are disc ussed based on economic globalization tendency. The results argue that a united transportation network should be built in order to promote the economic competit ion of Northeast Asia in the world. As a key component of the economic cooperati on, a hierarchical shipping centers network should be established with Hong Kong , Shanghai, Pusan, Kobe, and Tokyo as cores. The authorities of China, Japan,R. O. Korea and D. P. R. Korea should make more efforts to build a set of cooperat ion institutions based on raising the transportation efficiency.

Empirical investigation of topological and weighted properties of a bus transport network from China

Many bus transport networks （BTNs） have evolved into directed networks. A new representation model for BTNs is proposed, called directed-space P. The bus transport network of Harbin （BTN-H） is described as a directed and weighted complex network by the proposed representation model and by giving each node weights. The topological and weighted properties are revealed in detail. In-degree and out-degree distributions, in-weight and out-weight distributions are presented as an exponential law, respectively. There is a strong relation between in-weight and in-degree （also between out-weight and out-degree）, which can be fitted by a power function. Degree-degree and weight-weight correlations are investigated to reveal that BTN-H has a disassortative behavior as the nodes have relatively high degree （or weight）. The disparity distributions of out-degree and in-degree follow an approximate power-law. Besides, the node degree shows a near linear increase with the number of routes that connect to the corresponding station. These properties revealed in this paper can help public transport planners to analyze the status quo of the BTN in nature.

A Transportation Network Equilibrium Reformulation of Eco-Industry Chain Network

In this paper, we demonstrate that the eco-industrial network equilibrium model of link flow version previously introduced can be reformulated as a transportation network equilibrium problem of path flow version. Then, some methodological tools mainly applied in the field of transportation science can be used to discuss the eco-industrial chain network problem. What the highlighted contribution lies in is that the paper not only expands theory of supply chain model with reducing path flow but also generalizes the traditional transportation network equilibrium problem by new applications.