Fully connected neural networks(FCNNs)have been developed for the closure of subgrid-scale(SGS)stress and SGS heat flux in large-eddy simulations of compressible turbulent channel flow.The FCNNbased SGS model trained ...Fully connected neural networks(FCNNs)have been developed for the closure of subgrid-scale(SGS)stress and SGS heat flux in large-eddy simulations of compressible turbulent channel flow.The FCNNbased SGS model trained using data with Mach number Ma=3.0 and Reynolds number Re=3000 was applied to situations with different Mach numbers and Reynolds numbers.The input variables of the neural network model were the filtered velocity gradients and temperature gradients at a single spatial grid point.The a priori test showed that the FCNN model had a correlation coefficient larger than 0.91 and a relative error smaller than 0.43,with much better reconstructions of SGS unclosed terms than the dynamic Smagorinsky model(DSM).In a posteriori test,the behavior of the FCNN model was marginally better than that of the DSM in predicting the mean velocity profiles,mean temperature profiles,turbulent intensities,total Reynolds stress,total Reynolds heat flux,and mean SGS flux of kinetic energy,and outperformed the Smagorinsky model.展开更多
Bayesian regularized BP neural network(BRBPNN) technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of t...Bayesian regularized BP neural network(BRBPNN) technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of the network were obtained. After the selection of input variables using stepwise/multiple linear regression method in SPSS i1.0 software, the BRBPNN model was established between chlorophyll-α and environmental parameters, biological parameters. The achieved optimal network structure was 3-11-1 with the correlation coefficients and the mean square errors for the training set and the test set as 0.999 and 0.000?8426, 0.981 and 0.0216 respectively. The sum of square weights between each input neuron and the hidden layer of optimal BRBPNN models of different structures indicated that the effect of individual input parameter on chlorophyll- α declined in the order of alga amount 〉 secchi disc depth(SD) 〉 electrical conductivity (EC). Additionally, it also demonstrated that the contributions of these three factors were the maximal for the change of chlorophyll-α concentration, total phosphorus(TP) and total nitrogen(TN) were the minimal. All the results showed that BRBPNN model was capable of automated regularization parameter selection and thus it may ensure the excellent generation ability and robustness. Thus, this study laid the foundation for the application of BRBPNN model in the analysis of aquatic ecological data(chlorophyll-α prediction) and the explanation about the effective eutrophication treatment measures for Nanzui water area in Dongting Lake.展开更多
This paper develops a joint model utilizing the principal component analysis(PCA)and the back propagation(BP)neural network model optimized by the Levenberg Marquardt(LM)algorithm,and as an application of the joint mo...This paper develops a joint model utilizing the principal component analysis(PCA)and the back propagation(BP)neural network model optimized by the Levenberg Marquardt(LM)algorithm,and as an application of the joint model to investigate the damages caused by typhoons for a coastal province,Fujian Province,China in 2005-2015(latest).First,the PCA is applied to analyze comprehensively the relationship between hazard factors,hazard bearing factors and disaster factors.Then five integrated indices,overall disaster level,typhoon intensity,damaged condition of houses,medical rescue and self-rescue capability,are extracted through the PCA;Finally,the BP neural network model,which takes the principal component scores as input and is optimized by the LM algorithm,is implemented to forecast the comprehensive loss of typhoons.It is estimated that an average annual loss of 138.514 billion RMB occurred for 2005-2015,with a maximum loss of 215.582 in 2006 and a decreasing trend since 2010 though the typhoon intensity increases.The model was validated using three typhoon events and it is found that the error is less than 1%.These results provide information for the government to increase medical institutions and medical workers and for the communities to promote residents’self-rescue capability.展开更多
Plastic injection molding is a very complex process and its process planning has a direct influence on product quality and production efficiency. This paper studied the optimization of injection molding process by com...Plastic injection molding is a very complex process and its process planning has a direct influence on product quality and production efficiency. This paper studied the optimization of injection molding process by combining the numerical simulation with back-propagation(BP) networks. The BP networks are trained by the results of numerical simulation. The trained BP networks may:(1) shorten time for process planning;(2) optimize process parameters;(3) be employed in on-line quality control;(4) be integrated with knowledge-based system(KBS) and case-based reasoning(CBR) to make intelligent process planning of injection molding.展开更多
Recent years we have witnessed the rapid growth of social commerce in China, but many users are not willing to trust and use social commerce. So improving consumers’ trust and purchase intention has become a crucial ...Recent years we have witnessed the rapid growth of social commerce in China, but many users are not willing to trust and use social commerce. So improving consumers’ trust and purchase intention has become a crucial factor in the success of social commerce. Business factors, environment factors and social factors including twelve secondary indexes build up a social commerce trust evaluation model. Questionnaires are handed out to collect twelve secondary indexes scores as input of BP neural network and composite score of trust as output. Model simulation shows that both training samples and test samples have low level of average error and standard deviation, which certify that the model has good stability and it is a good method for evaluating social commerce trust.展开更多
The aim of the research was to create a prediction model for winter rapeseed yield.The constructed model enabled to perform simulation on 30 June,in the current year,immediately before harvesting.An artificial neural ...The aim of the research was to create a prediction model for winter rapeseed yield.The constructed model enabled to perform simulation on 30 June,in the current year,immediately before harvesting.An artificial neural network with multilayer perceptron(MLP) topology was used to build the predictive model.The model was created on the basis of meteorological data(air temperature and atmospheric precipitation) and mineral fertilization data.The data were collected in the period 2008–2017 from 291 productive fields located in Poland,in the southern part of the Opole region.The assessment of the forecast quality created on the basis of the neural model has been verified by defining forecast errors using relative approximation error(RAE),root mean square error(RMS),mean absolute error(MAE),and mean absolute percentage error(MAPE) metrics.An important feature of the created predictive model is the ability to forecast the current agrotechnical year based on current weather and fertilizing data.The lowest value of the MAPE error was obtained for a neural network model based on the MLP network of 21:21-13-6-1:1 structure,which was 9.43%.The performed sensitivity analysis of the network examined the factors that have the greatest impact on the yield of winter rape.The highest rank 1 was obtained by an independent variable with the average air temperature from 1 January to 15 April of 2017(designation by the T1-4_CY model).展开更多
An isothermal compressive experiment using Gleeble 1500 thermal simulator was studied to acquire flow stress at different deformation temperatures, strains and strain rates. The artificial neural networks with the err...An isothermal compressive experiment using Gleeble 1500 thermal simulator was studied to acquire flow stress at different deformation temperatures, strains and strain rates. The artificial neural networks with the error back propagation(BP) algorithm was used to establish constitutive model of 2519 aluminum alloy based on the experiment data. The model results show that the systematical error is small(δ=3.3%) when the value of objective function is 0.2, the number of nodes in the hidden layer is 5 and the learning rate is 0.1. Flow stresses of the material under various thermodynamic conditions are predicted by the neural network model, and the predicted results correspond with the experimental results. A knowledge-based constitutive relation model is developed.展开更多
According to the neural network theory, combined with the technical characteristicsof the hole-by-hole detonation technology, a BP network model on the forecast forblasting vibration parameters was built.Taking the de...According to the neural network theory, combined with the technical characteristicsof the hole-by-hole detonation technology, a BP network model on the forecast forblasting vibration parameters was built.Taking the deep hole stair demolition in a mine asan experimental object and using the raw information and the blasting vibration monitoringdata collected in the process of the hole-by-hole detonation, carried out some training andapplication work on the established BP network model through the Matlab software, andachieved good effect.Also computed the vibration parameter with the empirical formulaand the BP network model separately.After comparing with the actual value, it is discoveredthat the forecasting result by the BP network model is close to the actual value.展开更多
The interception probability of a single missile is the basis for combat plan design and weapon performance evaluation,while its influencing factors are complex and mutually coupled.Existing calculation methods have v...The interception probability of a single missile is the basis for combat plan design and weapon performance evaluation,while its influencing factors are complex and mutually coupled.Existing calculation methods have very limited analysis of the influence mechanism of influencing factors,and none of them has analyzed the influence of the guidance law.This paper considers the influencing factors of both the interceptor and the target more comprehensively.Interceptor parameters include speed,guidance law,guidance error,fuze error,and fragment killing ability,while target performance includes speed,maneuverability,and vulnerability.In this paper,an interception model is established,Monte Carlo simulation is carried out,and the influence mechanism of each factor is analyzed based on the model and simulation results.Finally,this paper proposes a classification-regression neural network to quickly estimate the interception probability based on the value of influencing factors.The proposed method reduces the interference of invalid interception data to valid data,so its prediction accuracy is significantly better than that of pure regression neural networks.展开更多
Ever since the appearance of"Implementation Measures for Suspending and Terminating the Listing of Loss-making Companies"in 2001,the delisting system has emerged.However,the proportion of delisted companies ...Ever since the appearance of"Implementation Measures for Suspending and Terminating the Listing of Loss-making Companies"in 2001,the delisting system has emerged.However,the proportion of delisted companies in China has never exceeded 1% each year.The number of delisted companies in the security market is far less than the number of companies with financial distress.The capital market lacks a good delisting system and investors lack risk identification capabilities.Financial risk is directly related to delisting risk.Therefore,an early warning model of financial distress prediction for China.s stock market can provide guidance to stakeholders such as listed companies and capital markets.This paper first explains the immature delisting system of China.s capital market and the overall high risk of listed companies.financial distress.Then,the paper further elaborates previous research on financial distress prediction model of listed companies and analyzes the advantages and disadvantages of different models.This paper chooses the Analytic Hierarchy Process(AHP)to screen out the main factors that affect the risk of financial distress.The main factors are included in Logistic regression model and BP neural network model for predicting financial distress of listed companies.The overall effect of two models are assessed and compared.Finally,this paper proposes policy implications according to empirical results.展开更多
The trial-and-error method is widely used for the current optimization of the steel casting feeding system, which is highly random, subjective and thus ineff icient. In the present work, both the theoretical and the e...The trial-and-error method is widely used for the current optimization of the steel casting feeding system, which is highly random, subjective and thus ineff icient. In the present work, both the theoretical and the experimental research on the modeling and optimization methods of the process are studied. An approximate alternative model is established based on the Back Propagation(BP) neural network and experimental design. The process parameters of the feeding system are taken as the input, the volumes of shrinkage cavities and porosities calculated by simulation are simultaneously taken as the output. Thus, a mathematical model is established by the BP neural network to combine the input variables with the output response. Then, this model is optimized by the nonlinear optimization function of the genetic algorithm. Finally, a feeding system optimization of a steel traveling wheel is conducted. No shrinkage cavities and porosities are induced through the optimization. Compared to the initial design scheme, the process yield is increased by 4.1% and the volume of the riser is decreased by 5.48×10~6 mm3.展开更多
The HCl emission characteristics of typical municipal solid waste(MSW) components and their mixtures have been investigated in a Φ150 mm fluidized bed. Some influencing factors of HCl emission in MSW fluidized bed in...The HCl emission characteristics of typical municipal solid waste(MSW) components and their mixtures have been investigated in a Φ150 mm fluidized bed. Some influencing factors of HCl emission in MSW fluidized bed incinerator was found in this study. The HCl emission is increasing with the growth of bed temperature, while it is decreasing with the increment of oxygen concentration at furnace exit. When the weight percentage of auxiliary coal is increased, the conversion rate of Cl to HCl is increasing. The HCl emission is decreased, if the sorbent(CaO) is added during the incineration process. Based on these experimental results, a 14×6×1 three-layer BP neural networks prediction model of HCl emission in MSW/coal co-fired fluidized bed incinerator was built. The numbers of input nodes and hidden nodes were fixed on by canonical correlation analysis technique and dynamic construction method respectively. The prediction results of this model gave good agreement with the experimental results, which indicates that the model has relatively high accuracy and good generalization ability. It was found that BP neural network is an effectual method used to predict the HCl emission of MSW/coal co-fired fluidized bed incinerator.展开更多
By using alternating current plasma arc welding,the influences were studied of such parameters as welding curent,arc voltage,welding speed,wire feed rate,and magnitude of ion gas flow on front melting width,wdle rei...By using alternating current plasma arc welding,the influences were studied of such parameters as welding curent,arc voltage,welding speed,wire feed rate,and magnitude of ion gas flow on front melting width,wdle reinforcement,and back melting width of LF6 aluminum alloy.Model of the formation of welding seam in alternating current plasma arc welding of aluminum was set up with the method of artificial neural neural network - BP algorithm. Qyakuty of formation was consequently predicted and evaluated.The experimental result shows that,compared with other modeling methods,artificial network model can be used to more accurately predict formation of weld,and to guide the production practice.展开更多
There are many influencing factors of fiscal revenue,and traditional forecasting methods cannot handle the feature dimensions well,which leads to serious over-fitting of the forecast results and unable to make a good ...There are many influencing factors of fiscal revenue,and traditional forecasting methods cannot handle the feature dimensions well,which leads to serious over-fitting of the forecast results and unable to make a good estimate of the true future trend.The grey neural network model fused with Lasso regression is a comprehensive prediction model that combines the grey prediction model and the BP neural network model after dimensionality reduction using Lasso.It can reduce the dimensionality of the original data,make separate predictions for each explanatory variable,and then use neural networks to make multivariate predictions,thereby making up for the shortcomings of traditional methods of insufficient prediction accuracy.In this paper,we took the financial revenue data of China’s Hunan Province from 2005 to 2019 as the object of analysis.Firstly,we used Lasso regression to reduce the dimensionality of the data.Because the grey prediction model has the excellent predictive performance for small data volumes,then we chose the grey prediction model to obtain the predicted values of all explanatory variables in 2020,2021 by using the data of 2005–2019.Finally,considering that fiscal revenue is affected by many factors,we applied the BP neural network,which has a good effect on multiple inputs,to make the final forecast of fiscal revenue.The experimental results show that the combined model has a good effect in financial revenue forecasting.展开更多
Evaluation of ecological carrying capacity is an important method of analyzing regional sustainable development, study on ecological carrying capacity is to settle the contradictions between resource and environment, ...Evaluation of ecological carrying capacity is an important method of analyzing regional sustainable development, study on ecological carrying capacity is to settle the contradictions between resource and environment, and it is a significant basis for realizing regional sustainable development. This paper, on the basis of the academician Sun Tiehang's "unification of three" for the eco-city construction, established ecological carrying capacity evaluation indexes for the traditional industrial and mining city—Huainan City; and applied GM–BP neural network coupling model for the dynamic evolution and prediction of ecological carrying capacity of Huainan City in the future decade. The results showed that ecological carrying capacity index of Huainan would be 2.13 by 2025, higher than the loadable state 1, so the ecological carrying capacity would keep in the over-loaded level, but the over-loaded degree would be lower than the current. Carrying capacity of arable land, energy and water resources contribute greatly to the improvement of ecological carrying capacity, thus it is imperative to adjust this unreasonable and unsustainable ecological consumption relationship, enhance environmental protection awareness and high-efficiency utilization of resources, and take an energy-saving and intensive development path.展开更多
The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture cont...The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture content of the yarn roll with a standard deviation of 1.58% in the range of 0% to 90.00%.According to the actual size of the yarn,the yarn roll simulation model is established.The microwave attenuation variations arising from the changes in the conductivity and dielectric constant of the wet cone yarn from1.8 GHz to 5.0 GHz frequency are obtained by ultra-wideband antenna.The measured data are analyzed using the BP neural network.The result shows that it is a non-contact and online method to solve the moisture content of the yarn in the wide moisture content range.展开更多
In order to identify continuous B-cell epitopes effectively and to increase the success rate of experimental identification, the modified Back Propagation artificial neural network (BP neural network) was used to pred...In order to identify continuous B-cell epitopes effectively and to increase the success rate of experimental identification, the modified Back Propagation artificial neural network (BP neural network) was used to predict the continuous B-cell epitopes, and finally the predictive model for the B-cells epitopes was established. Comparing with the other predictive models, the prediction performance of this model is more excellent (AUC = 0.723). For the purpose of verifying the performance of the model, the prediction to the SWISS PROT NUMBER: P08677 was carried on, and the satisfying results were obtained.展开更多
Accurate shear wave velocity is very important for seismic inversion.However,few researches in the shear wave velocity in organic shale have been carried out so far.In order to analyze the structure of organic shale a...Accurate shear wave velocity is very important for seismic inversion.However,few researches in the shear wave velocity in organic shale have been carried out so far.In order to analyze the structure of organic shale and predict the shear wave velocity,the authors propose two methods based on petrophysical model and BP neural network respectively,to calculate shear wave velocity.For the method based on petrophysics model,the authors discuss the pore structure and the space taken by kerogen to construct a petrophysical model of the shale,and establish the quantitative relationship between the P-wave and S-wave velocities of shale and physical parameters such as pore aspect ratio,porosity and density.The best estimation of pore aspect ratio can be obtained by minimizing the error between the predictions and the actual measurements of the P-wave velocity.The optimal porosity aspect ratio and the shear wave velocity are predicted.For the BP neural network method that applying BP neural network to the shear wave prediction,the relationship between the physical properties of the shale and the elastic parameters is obtained by training the BP neural network,and the P-wave and S-wave velocities are predicted from the reservoir parameters based on the trained relationship.The above two methods were tested by using actual logging data of the shale reservoirs in the Jiaoshiba area of Sichuan Province.The predicted shear wave velocities of the two methods match well with the actual shear wave velocities,indicating that these two methods are effective in predicting shear wave velocity.展开更多
基金Financial support provided by the National Natural Science Foundation of China(Grant Nos.11702042 and 91952104)。
文摘Fully connected neural networks(FCNNs)have been developed for the closure of subgrid-scale(SGS)stress and SGS heat flux in large-eddy simulations of compressible turbulent channel flow.The FCNNbased SGS model trained using data with Mach number Ma=3.0 and Reynolds number Re=3000 was applied to situations with different Mach numbers and Reynolds numbers.The input variables of the neural network model were the filtered velocity gradients and temperature gradients at a single spatial grid point.The a priori test showed that the FCNN model had a correlation coefficient larger than 0.91 and a relative error smaller than 0.43,with much better reconstructions of SGS unclosed terms than the dynamic Smagorinsky model(DSM).In a posteriori test,the behavior of the FCNN model was marginally better than that of the DSM in predicting the mean velocity profiles,mean temperature profiles,turbulent intensities,total Reynolds stress,total Reynolds heat flux,and mean SGS flux of kinetic energy,and outperformed the Smagorinsky model.
文摘Bayesian regularized BP neural network(BRBPNN) technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of the network were obtained. After the selection of input variables using stepwise/multiple linear regression method in SPSS i1.0 software, the BRBPNN model was established between chlorophyll-α and environmental parameters, biological parameters. The achieved optimal network structure was 3-11-1 with the correlation coefficients and the mean square errors for the training set and the test set as 0.999 and 0.000?8426, 0.981 and 0.0216 respectively. The sum of square weights between each input neuron and the hidden layer of optimal BRBPNN models of different structures indicated that the effect of individual input parameter on chlorophyll- α declined in the order of alga amount 〉 secchi disc depth(SD) 〉 electrical conductivity (EC). Additionally, it also demonstrated that the contributions of these three factors were the maximal for the change of chlorophyll-α concentration, total phosphorus(TP) and total nitrogen(TN) were the minimal. All the results showed that BRBPNN model was capable of automated regularization parameter selection and thus it may ensure the excellent generation ability and robustness. Thus, this study laid the foundation for the application of BRBPNN model in the analysis of aquatic ecological data(chlorophyll-α prediction) and the explanation about the effective eutrophication treatment measures for Nanzui water area in Dongting Lake.
文摘This paper develops a joint model utilizing the principal component analysis(PCA)and the back propagation(BP)neural network model optimized by the Levenberg Marquardt(LM)algorithm,and as an application of the joint model to investigate the damages caused by typhoons for a coastal province,Fujian Province,China in 2005-2015(latest).First,the PCA is applied to analyze comprehensively the relationship between hazard factors,hazard bearing factors and disaster factors.Then five integrated indices,overall disaster level,typhoon intensity,damaged condition of houses,medical rescue and self-rescue capability,are extracted through the PCA;Finally,the BP neural network model,which takes the principal component scores as input and is optimized by the LM algorithm,is implemented to forecast the comprehensive loss of typhoons.It is estimated that an average annual loss of 138.514 billion RMB occurred for 2005-2015,with a maximum loss of 215.582 in 2006 and a decreasing trend since 2010 though the typhoon intensity increases.The model was validated using three typhoon events and it is found that the error is less than 1%.These results provide information for the government to increase medical institutions and medical workers and for the communities to promote residents’self-rescue capability.
文摘Plastic injection molding is a very complex process and its process planning has a direct influence on product quality and production efficiency. This paper studied the optimization of injection molding process by combining the numerical simulation with back-propagation(BP) networks. The BP networks are trained by the results of numerical simulation. The trained BP networks may:(1) shorten time for process planning;(2) optimize process parameters;(3) be employed in on-line quality control;(4) be integrated with knowledge-based system(KBS) and case-based reasoning(CBR) to make intelligent process planning of injection molding.
文摘Recent years we have witnessed the rapid growth of social commerce in China, but many users are not willing to trust and use social commerce. So improving consumers’ trust and purchase intention has become a crucial factor in the success of social commerce. Business factors, environment factors and social factors including twelve secondary indexes build up a social commerce trust evaluation model. Questionnaires are handed out to collect twelve secondary indexes scores as input of BP neural network and composite score of trust as output. Model simulation shows that both training samples and test samples have low level of average error and standard deviation, which certify that the model has good stability and it is a good method for evaluating social commerce trust.
文摘The aim of the research was to create a prediction model for winter rapeseed yield.The constructed model enabled to perform simulation on 30 June,in the current year,immediately before harvesting.An artificial neural network with multilayer perceptron(MLP) topology was used to build the predictive model.The model was created on the basis of meteorological data(air temperature and atmospheric precipitation) and mineral fertilization data.The data were collected in the period 2008–2017 from 291 productive fields located in Poland,in the southern part of the Opole region.The assessment of the forecast quality created on the basis of the neural model has been verified by defining forecast errors using relative approximation error(RAE),root mean square error(RMS),mean absolute error(MAE),and mean absolute percentage error(MAPE) metrics.An important feature of the created predictive model is the ability to forecast the current agrotechnical year based on current weather and fertilizing data.The lowest value of the MAPE error was obtained for a neural network model based on the MLP network of 21:21-13-6-1:1 structure,which was 9.43%.The performed sensitivity analysis of the network examined the factors that have the greatest impact on the yield of winter rape.The highest rank 1 was obtained by an independent variable with the average air temperature from 1 January to 15 April of 2017(designation by the T1-4_CY model).
文摘An isothermal compressive experiment using Gleeble 1500 thermal simulator was studied to acquire flow stress at different deformation temperatures, strains and strain rates. The artificial neural networks with the error back propagation(BP) algorithm was used to establish constitutive model of 2519 aluminum alloy based on the experiment data. The model results show that the systematical error is small(δ=3.3%) when the value of objective function is 0.2, the number of nodes in the hidden layer is 5 and the learning rate is 0.1. Flow stresses of the material under various thermodynamic conditions are predicted by the neural network model, and the predicted results correspond with the experimental results. A knowledge-based constitutive relation model is developed.
基金Supported by the National Natural Science Foundation of China(50778107)
文摘According to the neural network theory, combined with the technical characteristicsof the hole-by-hole detonation technology, a BP network model on the forecast forblasting vibration parameters was built.Taking the deep hole stair demolition in a mine asan experimental object and using the raw information and the blasting vibration monitoringdata collected in the process of the hole-by-hole detonation, carried out some training andapplication work on the established BP network model through the Matlab software, andachieved good effect.Also computed the vibration parameter with the empirical formulaand the BP network model separately.After comparing with the actual value, it is discoveredthat the forecasting result by the BP network model is close to the actual value.
基金supported by the Foundation Strengthening Program Technology Field Foundation(2020-JCJQ-JJ-132)。
文摘The interception probability of a single missile is the basis for combat plan design and weapon performance evaluation,while its influencing factors are complex and mutually coupled.Existing calculation methods have very limited analysis of the influence mechanism of influencing factors,and none of them has analyzed the influence of the guidance law.This paper considers the influencing factors of both the interceptor and the target more comprehensively.Interceptor parameters include speed,guidance law,guidance error,fuze error,and fragment killing ability,while target performance includes speed,maneuverability,and vulnerability.In this paper,an interception model is established,Monte Carlo simulation is carried out,and the influence mechanism of each factor is analyzed based on the model and simulation results.Finally,this paper proposes a classification-regression neural network to quickly estimate the interception probability based on the value of influencing factors.The proposed method reduces the interference of invalid interception data to valid data,so its prediction accuracy is significantly better than that of pure regression neural networks.
文摘Ever since the appearance of"Implementation Measures for Suspending and Terminating the Listing of Loss-making Companies"in 2001,the delisting system has emerged.However,the proportion of delisted companies in China has never exceeded 1% each year.The number of delisted companies in the security market is far less than the number of companies with financial distress.The capital market lacks a good delisting system and investors lack risk identification capabilities.Financial risk is directly related to delisting risk.Therefore,an early warning model of financial distress prediction for China.s stock market can provide guidance to stakeholders such as listed companies and capital markets.This paper first explains the immature delisting system of China.s capital market and the overall high risk of listed companies.financial distress.Then,the paper further elaborates previous research on financial distress prediction model of listed companies and analyzes the advantages and disadvantages of different models.This paper chooses the Analytic Hierarchy Process(AHP)to screen out the main factors that affect the risk of financial distress.The main factors are included in Logistic regression model and BP neural network model for predicting financial distress of listed companies.The overall effect of two models are assessed and compared.Finally,this paper proposes policy implications according to empirical results.
基金financially supported by the Program for New Century Excellent Talents in University(Nos.NCET-13-0229,NCET-09-0396)the National Science&Technology Key Projects of Numerical Control(Nos.2012ZX04010-031,2012ZX0412-011)the National High Technology Research and Development Program("863"Program)of China(No.2013031003)
文摘The trial-and-error method is widely used for the current optimization of the steel casting feeding system, which is highly random, subjective and thus ineff icient. In the present work, both the theoretical and the experimental research on the modeling and optimization methods of the process are studied. An approximate alternative model is established based on the Back Propagation(BP) neural network and experimental design. The process parameters of the feeding system are taken as the input, the volumes of shrinkage cavities and porosities calculated by simulation are simultaneously taken as the output. Thus, a mathematical model is established by the BP neural network to combine the input variables with the output response. Then, this model is optimized by the nonlinear optimization function of the genetic algorithm. Finally, a feeding system optimization of a steel traveling wheel is conducted. No shrinkage cavities and porosities are induced through the optimization. Compared to the initial design scheme, the process yield is increased by 4.1% and the volume of the riser is decreased by 5.48×10~6 mm3.
文摘The HCl emission characteristics of typical municipal solid waste(MSW) components and their mixtures have been investigated in a Φ150 mm fluidized bed. Some influencing factors of HCl emission in MSW fluidized bed incinerator was found in this study. The HCl emission is increasing with the growth of bed temperature, while it is decreasing with the increment of oxygen concentration at furnace exit. When the weight percentage of auxiliary coal is increased, the conversion rate of Cl to HCl is increasing. The HCl emission is decreased, if the sorbent(CaO) is added during the incineration process. Based on these experimental results, a 14×6×1 three-layer BP neural networks prediction model of HCl emission in MSW/coal co-fired fluidized bed incinerator was built. The numbers of input nodes and hidden nodes were fixed on by canonical correlation analysis technique and dynamic construction method respectively. The prediction results of this model gave good agreement with the experimental results, which indicates that the model has relatively high accuracy and good generalization ability. It was found that BP neural network is an effectual method used to predict the HCl emission of MSW/coal co-fired fluidized bed incinerator.
文摘By using alternating current plasma arc welding,the influences were studied of such parameters as welding curent,arc voltage,welding speed,wire feed rate,and magnitude of ion gas flow on front melting width,wdle reinforcement,and back melting width of LF6 aluminum alloy.Model of the formation of welding seam in alternating current plasma arc welding of aluminum was set up with the method of artificial neural neural network - BP algorithm. Qyakuty of formation was consequently predicted and evaluated.The experimental result shows that,compared with other modeling methods,artificial network model can be used to more accurately predict formation of weld,and to guide the production practice.
基金This research was funded by the National Natural Science Foundation of China(No.61304208)Scientific Research Fund of Hunan Province Education Department(18C0003)+2 种基金Research project on teaching reform in colleges and universities of Hunan Province Education Department(20190147)Changsha City Science and Technology Plan Program(K1501013-11)Hunan Normal University University-Industry Cooperation.This work is implemented at the 2011 Collaborative Innovation Center for Development and Utilization of Finance and Economics Big Data Property,Universities of Hunan Province,Open project,grant number 20181901CRP04.
文摘There are many influencing factors of fiscal revenue,and traditional forecasting methods cannot handle the feature dimensions well,which leads to serious over-fitting of the forecast results and unable to make a good estimate of the true future trend.The grey neural network model fused with Lasso regression is a comprehensive prediction model that combines the grey prediction model and the BP neural network model after dimensionality reduction using Lasso.It can reduce the dimensionality of the original data,make separate predictions for each explanatory variable,and then use neural networks to make multivariate predictions,thereby making up for the shortcomings of traditional methods of insufficient prediction accuracy.In this paper,we took the financial revenue data of China’s Hunan Province from 2005 to 2019 as the object of analysis.Firstly,we used Lasso regression to reduce the dimensionality of the data.Because the grey prediction model has the excellent predictive performance for small data volumes,then we chose the grey prediction model to obtain the predicted values of all explanatory variables in 2020,2021 by using the data of 2005–2019.Finally,considering that fiscal revenue is affected by many factors,we applied the BP neural network,which has a good effect on multiple inputs,to make the final forecast of fiscal revenue.The experimental results show that the combined model has a good effect in financial revenue forecasting.
基金Sponsored by National Natural Science Foundation of China(41101566)
文摘Evaluation of ecological carrying capacity is an important method of analyzing regional sustainable development, study on ecological carrying capacity is to settle the contradictions between resource and environment, and it is a significant basis for realizing regional sustainable development. This paper, on the basis of the academician Sun Tiehang's "unification of three" for the eco-city construction, established ecological carrying capacity evaluation indexes for the traditional industrial and mining city—Huainan City; and applied GM–BP neural network coupling model for the dynamic evolution and prediction of ecological carrying capacity of Huainan City in the future decade. The results showed that ecological carrying capacity index of Huainan would be 2.13 by 2025, higher than the loadable state 1, so the ecological carrying capacity would keep in the over-loaded level, but the over-loaded degree would be lower than the current. Carrying capacity of arable land, energy and water resources contribute greatly to the improvement of ecological carrying capacity, thus it is imperative to adjust this unreasonable and unsustainable ecological consumption relationship, enhance environmental protection awareness and high-efficiency utilization of resources, and take an energy-saving and intensive development path.
基金The Science&Technology Innovation Action Plan of International Science and Technology Cooperation Projects from SSTEC(No.14510711600)
文摘The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture content of the yarn roll with a standard deviation of 1.58% in the range of 0% to 90.00%.According to the actual size of the yarn,the yarn roll simulation model is established.The microwave attenuation variations arising from the changes in the conductivity and dielectric constant of the wet cone yarn from1.8 GHz to 5.0 GHz frequency are obtained by ultra-wideband antenna.The measured data are analyzed using the BP neural network.The result shows that it is a non-contact and online method to solve the moisture content of the yarn in the wide moisture content range.
文摘In order to identify continuous B-cell epitopes effectively and to increase the success rate of experimental identification, the modified Back Propagation artificial neural network (BP neural network) was used to predict the continuous B-cell epitopes, and finally the predictive model for the B-cells epitopes was established. Comparing with the other predictive models, the prediction performance of this model is more excellent (AUC = 0.723). For the purpose of verifying the performance of the model, the prediction to the SWISS PROT NUMBER: P08677 was carried on, and the satisfying results were obtained.
基金National Natural Science Foundation of China(No.41874125,No.41430322).
文摘Accurate shear wave velocity is very important for seismic inversion.However,few researches in the shear wave velocity in organic shale have been carried out so far.In order to analyze the structure of organic shale and predict the shear wave velocity,the authors propose two methods based on petrophysical model and BP neural network respectively,to calculate shear wave velocity.For the method based on petrophysics model,the authors discuss the pore structure and the space taken by kerogen to construct a petrophysical model of the shale,and establish the quantitative relationship between the P-wave and S-wave velocities of shale and physical parameters such as pore aspect ratio,porosity and density.The best estimation of pore aspect ratio can be obtained by minimizing the error between the predictions and the actual measurements of the P-wave velocity.The optimal porosity aspect ratio and the shear wave velocity are predicted.For the BP neural network method that applying BP neural network to the shear wave prediction,the relationship between the physical properties of the shale and the elastic parameters is obtained by training the BP neural network,and the P-wave and S-wave velocities are predicted from the reservoir parameters based on the trained relationship.The above two methods were tested by using actual logging data of the shale reservoirs in the Jiaoshiba area of Sichuan Province.The predicted shear wave velocities of the two methods match well with the actual shear wave velocities,indicating that these two methods are effective in predicting shear wave velocity.