In the past decade,boron neutron capture therapy utilizing an accelerator-based neutron source(ABNS)designed primarily for producing epithermal neutrons has been implemented in the treatment of brain tumors and other ...In the past decade,boron neutron capture therapy utilizing an accelerator-based neutron source(ABNS)designed primarily for producing epithermal neutrons has been implemented in the treatment of brain tumors and other cancers.The specifications for designing an epithermal beam are primarily based on the IAEA-TECODC-1223 report,issued in 2001 for reactor neutron sources.Based on this report,the latest perspectives and clinical requirements,we designed an ABNS capable of adjusting the average neutron beam energy.The design was based on a 2.8 MeV,20 mA proton beam bombarding a lithium target to produce neutrons that were subsequently moderated and tuned through a tunable beam shaping assembly(BSA)which can modify the thicknesses and materials of the coin-shaped moderators,back reflectors,filters,and collimators.The simulation results demonstrated that epithermal neutron beams for deep seated tumor treatment,which were generated by utilizing magnesium fluoride with lengths ranging between 28 and 36 cm as the moderator,possessed a treatment depth of 5.6 cm although the neutron flux peak shifts from 4.5 to 1.0 keV.When utilizing a thinner moderator,a less accelerated beam power can meet the treatment requirements.However,higher powers reduced the treatment time.In contrast,employing a thick moderator can reduce the skin dose.In scenarios that required relatively low energy neutron beams,the removal of the thermal neutron filter can raise the thermal neutron flux at the beam port.And the depth of the dose rate peak could be adjusted between 0.25 and 2.20 cm by combining magnesium fluoride and polyethylene coins of different thicknesses.Hence,this device has a better adaptability for the treatment of superficial tumors.Overall,the tunable BSA provides greater flexibility for clinical treatment than common BSA designs that can only adjust the port size.展开更多
A new thermal neutron beam monitor with a Gas Electron Multiplier （GEM） is developed to meet the needs of the next generation of neutron facilities. A prototype chamber has been constructed with two 100 mm×100 ...A new thermal neutron beam monitor with a Gas Electron Multiplier （GEM） is developed to meet the needs of the next generation of neutron facilities. A prototype chamber has been constructed with two 100 mm×100 mm GEM foils. Enriched boron-10 is coated on one surface of the aluminum cathode plate as the neutron convertor. 96 channel pads with an area of 8 mm×8 mm each are used for fast signal readout. In order to study the basic characteristics of a boron-coated GEM, several irradiation tests were carried out with of source ^239pu and neutron source ^241Am（Be）. The signal induced by the neutron source has a high signal-to-noise ratio. A clear image obtained from of source ^239pu is presented, which shows that the neutron beam monitor based on a boron-coated GEM has a good two-dimensional imaging ability.展开更多
Purpose Back-n is a white neutron beamline at China spallation neutron source,which was established in the year of 2018.It is a powerful facility for nuclear data measurement,neutron detector calibration,and radiation...Purpose Back-n is a white neutron beamline at China spallation neutron source,which was established in the year of 2018.It is a powerful facility for nuclear data measurement,neutron detector calibration,and radiation effect research.Method A series of detectors were built for different experiments,including beam monitoring,beam profile measurement,neutron induced secondaries(fission fragments,light charged particles and gamma)cross section measurement,and neutron resonance radiography,etc.A common digitization electronics and a cluster-based DAQ were developed for these detector systems.Most detectors have been employed at Back-n and serviced for experiments from the beginning of the beamline running.Results and conclusion As an overview of detectors of Back-n,the details of the detector design and the experiment performing are described in this paper.Some developing systems,e.g.,MTPC and B-MCP,are also included.展开更多
The monocrystalline silicon neutron beam window is one of the key components of a neutron spectrom- eter. Monocrystalline silicon is brittle and its strength is generally described by a Weibull distribution due to the...The monocrystalline silicon neutron beam window is one of the key components of a neutron spectrom- eter. Monocrystalline silicon is brittle and its strength is generally described by a Weibull distribution due to the material inhomogeneity. The window is designed not simply according to the mean strength but also according to the survival rate. The total stress of the window is stress-linearized into a combination of membrane stress and bending stress by finite element analysis. The window is a thin circular plate, so bending deformation is the main cause of failure and tensile deformation is secondary and negligible. Based on the Weibull distribution of bending strength of monocrystalline silicon, the optimized neutron beam window is designed to be 1.5 mm thick. Its survival rate is 0.9994 and its transmittance is 0.98447, which meets both physical and mechanical requirements.展开更多
We designed a 100 MeV/100 kW electron linear accelerator for NSC KIPT, which will be used to drive a neutron source on the basis of subcritical assembly. Beam dynamics studies have been conducted to reach the design r...We designed a 100 MeV/100 kW electron linear accelerator for NSC KIPT, which will be used to drive a neutron source on the basis of subcritical assembly. Beam dynamics studies have been conducted to reach the design requirements （E=100 MeV, P=100 kW, dE/E 〈1% for 99% particles）. In this paper, we will present the progress of the design and the dynamic simulation results. For high intensity and long beam pulse linear accelerators, the BBU effect is one big issue; special care has been taken in the accelerating structure design. To satisfy the energy spread requirement at the linac exit, the particles with large energy difference from the synchronous particle should be eliminated at a low energy stage to ease the design of the collimation system and radiation shielding. A dispersion free chicane with 4 bending magnets is introduced downstream of the 1st accelerating section; the unwanted particles will be collimated there.展开更多
The laser system PALS,as a driver of a broad-beam ion source,delivered deuterons which generated neutrons with energies higher than 14 Me V through the 7Li(d,n)8 Be reaction.Deuterons with sub-Me V energy were acceler...The laser system PALS,as a driver of a broad-beam ion source,delivered deuterons which generated neutrons with energies higher than 14 Me V through the 7Li(d,n)8 Be reaction.Deuterons with sub-Me V energy were accelerated from the front surface of a massive CD2 target in the backward direction with respect to the laser beam vector.Simultaneously,neutrons were emitted from the primary CD2 target and a secondary Li F catcher.The total maximum measured neutron yield from 2D(d,n)3He,7Li(d,n)8Be,12C(d,n)13N reactions was ～3.5(±0.5) × 108 neutrons/shot.展开更多
IHEP, China is constructing a 100 MeV/100 kW electron Linac for NSC KIPT, Ukraine. This linac will be used as the driver of a neutron source based on a subcritical assembly. In 2012, the injector part of the accelerat...IHEP, China is constructing a 100 MeV/100 kW electron Linac for NSC KIPT, Ukraine. This linac will be used as the driver of a neutron source based on a subcritical assembly. In 2012, the injector part of the accelerator was pre-installed as a testing facility in the experimental hall #2 of IHEP. The injector beam and key hardware testing results met the design goal. Recently, the injector testing facility was disassembled and all of the components for the whole accelerator have been shipped to Ukraine from China by the ocean shipping. The installation of the whole machine in KIPT will be started in June, 2013. The construction progress, the design and testing results of the injector beam and key hardware are presented.展开更多
基金supported by the National Nature Science Foundation of China(No.1210050454)the program of Chinese Scholarship Council(No.202106280126)。
文摘In the past decade,boron neutron capture therapy utilizing an accelerator-based neutron source(ABNS)designed primarily for producing epithermal neutrons has been implemented in the treatment of brain tumors and other cancers.The specifications for designing an epithermal beam are primarily based on the IAEA-TECODC-1223 report,issued in 2001 for reactor neutron sources.Based on this report,the latest perspectives and clinical requirements,we designed an ABNS capable of adjusting the average neutron beam energy.The design was based on a 2.8 MeV,20 mA proton beam bombarding a lithium target to produce neutrons that were subsequently moderated and tuned through a tunable beam shaping assembly(BSA)which can modify the thicknesses and materials of the coin-shaped moderators,back reflectors,filters,and collimators.The simulation results demonstrated that epithermal neutron beams for deep seated tumor treatment,which were generated by utilizing magnesium fluoride with lengths ranging between 28 and 36 cm as the moderator,possessed a treatment depth of 5.6 cm although the neutron flux peak shifts from 4.5 to 1.0 keV.When utilizing a thinner moderator,a less accelerated beam power can meet the treatment requirements.However,higher powers reduced the treatment time.In contrast,employing a thick moderator can reduce the skin dose.In scenarios that required relatively low energy neutron beams,the removal of the thermal neutron filter can raise the thermal neutron flux at the beam port.And the depth of the dose rate peak could be adjusted between 0.25 and 2.20 cm by combining magnesium fluoride and polyethylene coins of different thicknesses.Hence,this device has a better adaptability for the treatment of superficial tumors.Overall,the tunable BSA provides greater flexibility for clinical treatment than common BSA designs that can only adjust the port size.
文摘A new thermal neutron beam monitor with a Gas Electron Multiplier （GEM） is developed to meet the needs of the next generation of neutron facilities. A prototype chamber has been constructed with two 100 mm×100 mm GEM foils. Enriched boron-10 is coated on one surface of the aluminum cathode plate as the neutron convertor. 96 channel pads with an area of 8 mm×8 mm each are used for fast signal readout. In order to study the basic characteristics of a boron-coated GEM, several irradiation tests were carried out with of source ^239pu and neutron source ^241Am（Be）. The signal induced by the neutron source has a high signal-to-noise ratio. A clear image obtained from of source ^239pu is presented, which shows that the neutron beam monitor based on a boron-coated GEM has a good two-dimensional imaging ability.
基金support provided by the National KeyR&DProgram of China(Grant No.2016YFA0401600).
文摘Purpose Back-n is a white neutron beamline at China spallation neutron source,which was established in the year of 2018.It is a powerful facility for nuclear data measurement,neutron detector calibration,and radiation effect research.Method A series of detectors were built for different experiments,including beam monitoring,beam profile measurement,neutron induced secondaries(fission fragments,light charged particles and gamma)cross section measurement,and neutron resonance radiography,etc.A common digitization electronics and a cluster-based DAQ were developed for these detector systems.Most detectors have been employed at Back-n and serviced for experiments from the beginning of the beamline running.Results and conclusion As an overview of detectors of Back-n,the details of the detector design and the experiment performing are described in this paper.Some developing systems,e.g.,MTPC and B-MCP,are also included.
文摘The monocrystalline silicon neutron beam window is one of the key components of a neutron spectrom- eter. Monocrystalline silicon is brittle and its strength is generally described by a Weibull distribution due to the material inhomogeneity. The window is designed not simply according to the mean strength but also according to the survival rate. The total stress of the window is stress-linearized into a combination of membrane stress and bending stress by finite element analysis. The window is a thin circular plate, so bending deformation is the main cause of failure and tensile deformation is secondary and negligible. Based on the Weibull distribution of bending strength of monocrystalline silicon, the optimized neutron beam window is designed to be 1.5 mm thick. Its survival rate is 0.9994 and its transmittance is 0.98447, which meets both physical and mechanical requirements.
文摘We designed a 100 MeV/100 kW electron linear accelerator for NSC KIPT, which will be used to drive a neutron source on the basis of subcritical assembly. Beam dynamics studies have been conducted to reach the design requirements （E=100 MeV, P=100 kW, dE/E 〈1% for 99% particles）. In this paper, we will present the progress of the design and the dynamic simulation results. For high intensity and long beam pulse linear accelerators, the BBU effect is one big issue; special care has been taken in the accelerating structure design. To satisfy the energy spread requirement at the linac exit, the particles with large energy difference from the synchronous particle should be eliminated at a low energy stage to ease the design of the collimation system and radiation shielding. A dispersion free chicane with 4 bending magnets is introduced downstream of the 1st accelerating section; the unwanted particles will be collimated there.
基金funding from the Czech Science Foundation (Grant No.P205/12/0454)the Czech Republic’s Ministry of Education,Youth and Sports (Project No.LM2010014)+2 种基金LASERLAB-EUROPE (grant agreement no 284464,EC’s Seventh Framework Programme)the European Social Fundstate budget of the Czech Republic (Project No.CZ.1.07/2.3.00/20.0279)
文摘The laser system PALS,as a driver of a broad-beam ion source,delivered deuterons which generated neutrons with energies higher than 14 Me V through the 7Li(d,n)8 Be reaction.Deuterons with sub-Me V energy were accelerated from the front surface of a massive CD2 target in the backward direction with respect to the laser beam vector.Simultaneously,neutrons were emitted from the primary CD2 target and a secondary Li F catcher.The total maximum measured neutron yield from 2D(d,n)3He,7Li(d,n)8Be,12C(d,n)13N reactions was ～3.5(±0.5) × 108 neutrons/shot.
文摘IHEP, China is constructing a 100 MeV/100 kW electron Linac for NSC KIPT, Ukraine. This linac will be used as the driver of a neutron source based on a subcritical assembly. In 2012, the injector part of the accelerator was pre-installed as a testing facility in the experimental hall #2 of IHEP. The injector beam and key hardware testing results met the design goal. Recently, the injector testing facility was disassembled and all of the components for the whole accelerator have been shipped to Ukraine from China by the ocean shipping. The installation of the whole machine in KIPT will be started in June, 2013. The construction progress, the design and testing results of the injector beam and key hardware are presented.
