Erratum to:International Journal of Minerals, Metallurgy and Materials Volume 26, Number 9, September 2019, Page 1151https://doi.org/10.1007/s12613-019-1854-1The original version of this article unfortunately containe...Erratum to:International Journal of Minerals, Metallurgy and Materials Volume 26, Number 9, September 2019, Page 1151https://doi.org/10.1007/s12613-019-1854-1The original version of this article unfortunately contained a mistake. The presentation of Fig. 11 was incorrect. The correct version is given below:展开更多
In this paper, we have studied the anti-rebar corrosion ability of high-strength concrete （HSC）, which were made by one or two mixed fly ash and slag. The different effects of fly ash and slag on concrete anti-rebar...In this paper, we have studied the anti-rebar corrosion ability of high-strength concrete （HSC）, which were made by one or two mixed fly ash and slag. The different effects of fly ash and slag on concrete anti-rebar corrosion ability were discussed in chloride ion-contaminated condition. The results indicate that the effects of slag on concrete anti-chloride ion penetration ability are more excellent than that of fly ash at the same content. When the content of fly ash is 10%, the corrosion-inhibition action is not obvious; when the content is higher than 25%, this effect is remarkable. Corrosion-inhibition action of slag is better than that of fly ash. Slag is not like fly ash that has obvious effect on anode curves Tafer slope, so its contribution to restraining rebar in concrete corrosion is the result of high concrete anti-chloride ion penetration ability and binding chloride ion. Their ＂superimposition effect＂ can be realized only at reasonable content and proportion condition.展开更多
Effects of micro-alloying elements and production process on microstructure, mechanical properties and precipitates of 600 MPa grade rebars were studied by using pilot test, metallographic observa- tion, tensile test,...Effects of micro-alloying elements and production process on microstructure, mechanical properties and precipitates of 600 MPa grade rebars were studied by using pilot test, metallographic observa- tion, tensile test, thermodynamic calculation and transmission electron microscopy. The results show that the tested steels are composed of ferrite and pearlite, in which the conterlt range of pearlite is 33%-45%. For vanadium micro-alloyed steel, interphase preeipitation Strengthening effect of V can be promoted and the yield strength of tested steels can be increased with increasing V content and de- creasing finishing rolling temperature. The temperature of terminated cooling should be more than 700 ℃ when the water cooling is used. When niobium is added to the steel, more coarse （Nb,V）C,N precipitates are generated at high temperature, so that the solid solubility of precipitated phases of vanadium is reduced and the precipitation strengthening effect of vanadium is weakened.展开更多
文摘Erratum to:International Journal of Minerals, Metallurgy and Materials Volume 26, Number 9, September 2019, Page 1151https://doi.org/10.1007/s12613-019-1854-1The original version of this article unfortunately contained a mistake. The presentation of Fig. 11 was incorrect. The correct version is given below:
基金Supported by the National Natural Science Foundation of China (50772084)
文摘In this paper, we have studied the anti-rebar corrosion ability of high-strength concrete （HSC）, which were made by one or two mixed fly ash and slag. The different effects of fly ash and slag on concrete anti-rebar corrosion ability were discussed in chloride ion-contaminated condition. The results indicate that the effects of slag on concrete anti-chloride ion penetration ability are more excellent than that of fly ash at the same content. When the content of fly ash is 10%, the corrosion-inhibition action is not obvious; when the content is higher than 25%, this effect is remarkable. Corrosion-inhibition action of slag is better than that of fly ash. Slag is not like fly ash that has obvious effect on anode curves Tafer slope, so its contribution to restraining rebar in concrete corrosion is the result of high concrete anti-chloride ion penetration ability and binding chloride ion. Their ＂superimposition effect＂ can be realized only at reasonable content and proportion condition.
基金supported by Natural Science Research Project of Anhui Province of China (KJ2016A091)Natural Science Foundation of Anhui Province (1708085ME116)Science and Technology Research Program of Anhui Province of China (1201a0201005)
文摘Effects of micro-alloying elements and production process on microstructure, mechanical properties and precipitates of 600 MPa grade rebars were studied by using pilot test, metallographic observa- tion, tensile test, thermodynamic calculation and transmission electron microscopy. The results show that the tested steels are composed of ferrite and pearlite, in which the conterlt range of pearlite is 33%-45%. For vanadium micro-alloyed steel, interphase preeipitation Strengthening effect of V can be promoted and the yield strength of tested steels can be increased with increasing V content and de- creasing finishing rolling temperature. The temperature of terminated cooling should be more than 700 ℃ when the water cooling is used. When niobium is added to the steel, more coarse （Nb,V）C,N precipitates are generated at high temperature, so that the solid solubility of precipitated phases of vanadium is reduced and the precipitation strengthening effect of vanadium is weakened.
