Size fractionated biomass and productivity of phytoplankton and new production in the Prydz Bay and the adjacent Indian sector of the Southern Ocean during the austral summer 1998/1999

The paper deals with the studies on the cell abundance, the composition of dominant species, size fractionated biomass and productivity of phytoplankton, new production, the environmentally restricted mechanism in the Prydz Bay and the adjacent Indian sector of the Southern Ocean during the austral summer 1998/1999. The results showed that there was marked feature of spatial zonation in the sea areas investigated. In the Prydz Bay and its adjacent continental shelf, the biomass and productivity of phytoplankton were high; those of continental slope and open ocean area were obviously low. The nutrient concentration had opposite distribution trend, due to the consumption of phytoplankton. It mainly affected by the vertical stability of water column, grazing pressure of zooplankton, temperature and light etc. The results of size-fractionation showed that the average contribution of netplankton to total chlorophyll a in studied sea areas was 52.2 %, those of nano- and picoplankton were 29.4 % and 18.4 %, respectively. The average contribution of netplankton to total primary production was 52.4 %, those of nano- and picoplankton were 28.7 % and 18.9 %, separately. It is same as previous conclusion that the contribution of picoplankton to productivity is slightly larger than that to biomass of phytoplankton communities. The average new production and f-ratio were 230.6 mg/ (m(2.)d) and 0.43, respectively.

Investigation Into the Market-Orientated New Product Development Performance

The effect that the market orientation brings to product innovation performance is reported and the degree of product innovativeness is explored. The interdepartmental integration inside the company is also investigated. A series of hypotheses were developed aiming at presenting a conceptual framework to clarify how market orientation contributes to product innovation performance-moderated by the degree of product innovativeness and affected by the interdepartmental integration. Survey data from 36 business units were analyzed based on the respondents in the research. The statistic results suggest a substantial positive effect of market orientation on product innovation performance. Under the condition of incremental innovativeness among the samples, the more innovative the product is, the more improvements in product innovation performance would be achieved. A variety of particular interdepartmental integration mechanisms have been certified to lend more supports to establishing market orientation and improving product innovation performance.

Exploring Barriers and Opportunities in Adopting Crowdsourcing Based New Product Development in Manufacturing SMEs

Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people （the ＇Crowd＇）. The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development （NPD） of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

Distribution characteristics of size-fractionated chlorophyll a, primary production and new production in the Laizhou Bay, July 1997

The distributions of chlorophyll a concentration, primary production and new productionwere observed in the Laizhou Bay of the Bohai Sea in both spring and neap tides during July 1997. The results showed that there were marked features of spatial zonation in the surveyed area, due to the differences between the geographic environment and the hydrological conditions. Chlorophyll a, primary production and new production were all higher in spring tides than that in neap tides in the Laizhou Bay. The highest values of these parameters were encountered in the central regions of the bay. At most stations, chlorophyll a concentrations at the bottom were higher than that at the surface. The results of size-fractionated chlorophyll a and primary production showed that contributions of nanocombining pi-coplankton ( <20 μm) to total chlorophyll a and primary production were dominant in phytoplankton community biomass and production of the Laizhou Bay. The environmental factors, primary production and new production in the Laizhou Bay are compared with other sea areas.

Application of vertically integrated sampling approach to study of new production via ^(234)Th -^(238)U disequilibria

The spatial and temporal distributions of new production vary largely in different sea areas. To understand the level of new production in the sea area studied better, an estimate of new production must be obtained in large spatial and temporal scales. The ~234Th/ ~238U disequilibrium is an effective method for the study of new production. Two sampling strategies, vertically integrated sampling ap proach based on trapezoidal integration principle and discrete layer sampling approach, were compared in the studies of the xiamen Bay and the northern South China Sea. The scavenging fluxes and removal fluxes of ~234Th and the residence times for dissolved and particulate ~234Th were calculated. The coinci dent results from two Sampling approach suggest that vertically integrated sampling approach is not only effective and reliable, but also significantly reduces the number and volume of samples. It allows us to study new production by ba ^(234)Th - ^(238)U disequilibria in large spatial scale.

Impact of the synergy between technology management and technological capability on new product development:a system dynamics approach

This paper employs system dynamics to explore how the synergy between technology management and technological capability affects new product development.The results show that the synergy between technology management and technological capability has positive impact on new product development.Moreover, the leading synergy processes between technology management and technological capability in different new product development stages are different.This paper deepens the theoretical understanding of how to achieve new product development, and also provides useful guidance for firms to implement new product development.

Postponement in New Product Introduction

Agility has now been a main research topic in the l it erature. There is much written on agility mainly focusing on manufacturing p rocess and strategic processes. However, we argue that new product introduction should call for agility as well due to uncertainty about technological advances and customers’ demand. A technological superiority alone may not guarantee succe ss for new product introduction. We focus on the role of postponement for two ma in processes in new product introduction: new product development and new produc t launch. Postponement enables designers to incorporate the most current technol ogical advances and user needs as these co-evolve with the development process. Postponement can also significantly reduce risk associated with new product lau nch. It thus can be expected that postponement will be increasingly employed in new product introduction.

Dabao-Developing New Products

The new products of the Dabaocosmetics series that have beenappearing repeatedly are manufactured atthe Beijing Sanlu Factory. The enterprise,which began to produce a plant-typecosmetics series in 1985, first presentedthe four-limb depilatory lotion, acne lotionand skin whitening lotion. They havebeen favored by numerous consumers onthe Chinese market, becoming well-known cosmetics. The Beijing Sanlu Factory currentlyowns 8 semi-automatic productionassembly lines and super

Kehui Series New Products

The following series of new hightech products products has been developed by Kehui Electricity Co.: 1. T-902 Cable Trouble Distance Measuring Instrument The product is a cable trouble distance measuring instrument based on the methods of low-volt pulse reflection and pulse electric current and using modern microelectronic technology. Two work modes used are. one is

Development of New Products——A Must for the Development of Enterprise

Jiangsu Feng Ming Group is a large and comprehensive provincial foodstuff enterprise group combining research, development, production and operation, trading and circulation and service. Over the past few years, on the basis of the processing of fruits and vegetables and taking its name brand products as the lead, the group has

Co-integration Analysis of the Relationship between New Product Output and R&D Investment in China’s Pharmaceutical Industry

Objective To study the possible relationship between the output of new products in China’s pharmaceutical industry and the investment in research and development(R&D),and to provide a theoretical basis for the decision-making of relevant enterprises and institutions.Methods The econometric software Stata 14 was used to perform unit root test on the relevant data.Then,a co-integration regression equation was established after stabilization,which was analyzed through co-integration test(E-G two-step method).Results and Conclusion There is a long-term equilibrium and short-term error correction relationship between the output of new products and the investment of R&D funds in China’s pharmaceutical industry.During the lagging periods from 1 to 6,R&D investment is the Granger reason for the output of new products.The investment of R&D funds has a positive effect on the output of new products and the effect is significant.Therefore,more investment should be made in R&D to enhance the output of new products.

Fountain Set Limited Launched New Products of 2011 Autumn-Winter Collections:Eco-friendliness and Multi-category

Fountain Set Limited announced that its branch brand'Fountain Set' was producing 2011 autumn-winter collections on the 2010 Intertextile Shanghai Apparel Fabrics Trade Fair,displaying new products

Estimates of potential new production in the Java-Sumatra upwelling system

The Java-Sumatra upwelling is one of the most important upwelling systems in the Indian Ocean, with maximum upwelling intensity in July through August. To estimate the nitrate supplied by upwelling, we developed a three-dimensional hydrodynamic model to calculate the mean vertical speed and determine the depth of upwelling. We used in-situ vertical nitrate profiles to assess nitrate concentration in the upwelled waters, and calculated the nitrate supply as the product of nitrate concentration and vertical transport obtained from the numerical model. The calculated result represents potential new production generated in the upwelling region. We found that on the event time scale (monthly) of Java-Sumatra upwelling, water brought to the surface originated from locations 100-m deep, giving a nitrate supply of 93.77×10 3mol/s and potential new production of 1.02×10 14gC/a.

Selection Model of Optional Parts in Suppliers Involved in New Product Development

Quality function deployment (QFD),which can translate efficiently customer requirement (CRs) into technical attributes (TAs),is widely used in new product development (NPD) as an efficient customer-driven approach. After lots of QFD application is applied in manufacturing fields,it was proved that without considering suppliers involved,it is difficult to get precise and satisfying results in each process of QFD,particularly part deployment. The paper will address the issues of a model of optional parts selection in suppliers involved in part deployment process. Further,it has been applied to an ERP system reconstruction and updating problem as an illustration.

Effective decision-making model for hi-tech new product development

In order to identify the effective decision-making factors at the individual NPD project manager level, a new effective decision-making model has been established by introducing the concept of decision-making effectiveness, analyzing the role of expertise, and identifying the major role of expertise and insight with respect to the interfaces between a new product, an organization, customers, technologies and regulations, for the study of the effective decision-making facilitators and inhibitors for a NPD project. The analysis of the unique task conditions for individual decision-makers shows that perceived complexity, uncertainty and time pressure have their negative effect on the effective decision-making process. It is concluded that the flexible, balanced and appropriate use of rational analysis, common sense and intuition is a key effective decision-making factor, and the psychologically ‘active attitude’ of a manager is also an important factor for successful dealing with the difficult task conditions.

A new production technique for wear resistant ring-hammers

Based on a great number of laboratory experiments, a new technique has been developed for producing wear resistant ring-hammers. In this technology, lost foam casting with iron sand was combined to make mold; a special alloy was used to inoculate the molten steel, and proper heat treatment was used to further improve mechanical properties of wear resistant ring-hammers. The influence of this new production technology on the microstructure and mechanical properties of wear resistant ring-hammers was studied. Results show that iron sand molding, having the inherent characteristic of sand molding, changes the type of metallic compounds, refines crystal grains and increases the fineness of microstructure. Practical experience verified that the properties of the ring-hammers produced with this new technique are as follows: tensile strength (Rm) 720 MPa, impact toughness (ak) > 210 J·cm-2 and hardness > 200 HB. After water quenching from 1,080℃ (holding for 4 h) and tempering at 320℃ for 3 h, the best wear resistance is obtained, and the wear resistance is 1.6 times higher than that of common high manganese ring-hammers.

A Three-Stage Stochastic Dynamic Pricing Game Model Affected by New Products into the Market

In real-life marketing, a common phenomenon is that the prices of current product will have been cut down even the new product has not gone into market yet. Thus, it is very important for merchant to set the strategy which can make the excepted revenue maximum. So, this paper constructs a three-stage stochastic dynamic pricing game model for analyzing the influence of the uncertainty of entry timing of the new products on pricing of products being sold. By analyzing of the pricing strategy, there are big differences in the predictions of new product going into market between merchant and customers;the merchant will adopt cutting price for promotion strategy to reduce negative influence of the new products on the demand of the products sold now. Otherwise, the merchant will adopt the strategy of maximizing current period’s profit.