A NEW SOLVENT POLYMERIC MEMBRANE pH SENSOR WITH WIDE LINEAR pH RANGE

A new solvent polymeric membrane (SPM)pH2sensor based on 4,4'-bis (N, N-didecylamino)methyl)azobenzene as neutral carricr has been reported. It has excellent pH response characteristics with the linear response range (1.7—13.2)much wider than that of similar SPM pH sensors reported so far. The sensor has a theoretical Nernstian response of 57.4+0.2V/pH(at 20℃)without super—Nernstian response phenomenon.

An Introductory Overview of Earthquake Early Warning

Earthquake early warning(EEW)is discriminated from earthquake prediction by using initial seismic waves to predict the severity of ground motion and issue the warning information to potential affected area.The warning information is useful to mitigate the disaster and decrease the losses of life and economy.We reviewed the development history of EEW worldwide and summarized the methodologies using in different systems.Some new sensors came and are coming into EEW giving more developing potential to future implementation.The success of earthquake disaster mitigation relies on the cooperation of the whole society.

Possibility of the Application of the Ultra-long Electromagnetic Wave Remote Sensor to Marine Geological Exploration

The ultra-long electromagnetic wave remote sensing technique developed by Peking University is one of new future techniques, which can detect the submarine geological information from the depth of 20 to 10000 m below the surface by receiving natural ultra-long electromagnetic waves (n Hz to n 100 Hz). The new remote sensor is composed of three parts: a main instrument with a portable computer, an antenna with an amplifier and an external power.

Optical Fiber Grating Sensor for Force Measurement of Anchor Cable

The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed in the laboratory - optical fiber grating sensor for force measurement of anchor cable （OFBFMAC）. No similar report about this kind of sensor has been found up to now in China and other countries. This sensor is proved to be an effective way of monitoring in processes of anchor cable installation, cable cutting, cable force regulation, etc, with the accurate and repeatable measuring results. Its successful application in the tie bar cable force safety monitoring for Wuhan Qingchuan bridge is a new exploration of optical fiber grating sensing technology in bridge tie bar monitoring system.

A new demodulation technique for optical fiber interferometric sensors with[3×3]directional couplers

Optical fiber interferometric sensors based on [3×3] couplers have been used in many fields. A new technique is proposed to demodulate output signals of this kind of sensors. The technique recovers the signal of interest by fitting coefficients of elliptic （Lissajous） curves between each fiber pair. Different from other approaches, this technique eliminates the dependence on the idealization of [3×3] coupler, provides enhanced tolerance to the variance of photoelectric converters, and is anti-polarization in a certain extent. The main algorithm has been successfully demonstrated both by numerical simulation and experimental result.

A Quarter Century of Work to Revolutionize Architecture, Engineering and Construction Enterprise Information Systems

More than two decades ago, object-oriented representation of AEC （architecture engineering and construction） projects started to offer the promise of seamless communication of semantic data models between computer-based systems used from the design stage to the operation of the facilities. BIM （building information modelling） emerged and appeared as a means to store all relevant data generated during the life-cycle of the facilities. But this upstream view of the built environment, arising from the design and construction stages, extended to the downstream operations where building and industrial facilities appeared more and more as huge dynamic data producers and concentrators while being operated. This created new challenges leading to what is referred to as ISCs （intelligent and smart constructions）. The current state of the art is that final constructions still contain various and increasingly versatile control and service systems, which are hardly standardised, and not interconnected among themselves. Monitoring, maintenance and services are done by specialised companies, each responsible of different systems, which are relying on customised software and techniques to meet specific user needs and are based on monolithic applications that require manual configuration for specific uses, maintenance and support. We demonstrate in this paper that the early promises of integration across the actors and along the life-time of facilities have gone a long way but will only be delivered through enhanced standardisation of computerized models, representations, services and operations still not yet fully accomplished 25 years after work started.

New Demodulation System for Fiber Bragg Grating Sensor

The mechanism of measuring temperature and strain using FBG has been studied deeply, however , signal demodulation has not been thoroughly solved. A novel demodulation system using CCD and a temperature sensing system are designed.