Contextualization: Emptying the bladder is a challenging problem for the urological community. Intermittent catheterization is the most widely used method to restore bladder emptying mechanism. However, this procedure...Contextualization: Emptying the bladder is a challenging problem for the urological community. Intermittent catheterization is the most widely used method to restore bladder emptying mechanism. However, this procedure can have a negative impact on self-image and result in a decline in the quality of life of patients. In this context, the use of a bladder emptying device (SVCATH3D) proposes to be effective and have a positive impact on the quality of life of different patients. Objective: The objective of the study was to evaluate the functionality of a new device for both intermittent and controlled emptying of the bladder in both sexes and ages. Materials and methods: A randomized clinical trial was conducted with 251 patients, with different bladder problems, from March 2013 to January 2023. After randomization, the patients were divided into two groups: Group I (SVCATH3D) and Group II (Clean Intermittent Catheterization). The primary outcome was defined as the impact on quality of life. Data on episodes of urinary tract infection, adverse effects, number of diaper use and treatment costs were analyzed. Results: The apposition of the SVCATH3D was performed on an outpatient basis, with no complications during the procedures. The patients were followed up for 10 years. There was a significant improvement in quality of life when comparing the moments before and after the use of SVCATH3D (p Conclusion: The study using SVCATH3D showed promising results in relation to functionality, showing improvement in quality of life with a reduction in episodes of urinary infection and amount of diapers/day. This allows us to conclude that SVCATH3D can represent an important step in the treatment of patients suffering from various bladder problems both incontinence and affecting emptying mechanism.展开更多
Background: In Mali, contraceptive prevalence is low, while the unmet need for family planning is very high. Postpartum contraception can help to significantly reduce these unsatisfied needs. The introduction of the i...Background: In Mali, contraceptive prevalence is low, while the unmet need for family planning is very high. Postpartum contraception can help to significantly reduce these unsatisfied needs. The introduction of the intrauterine device (IUD) in the postpartum quickly encountered problems with the type of forceps used to make the insertions (Kelly or Heart forceps), and also their availability at the various health centers. Thus, in 2016, the Population Services International Mali (PSI-Mali) introduced the insertion of the IUD in the postpartum with the new inserter in order to counter this forceps problem and to contribute to guaranteeing the quality of postpartum IUD insertions. Objectives: They were to determine the frequency, the socio-demographic and clinical characteristics and to report the side effects and the complications. Methods: This was a descriptive and analytical cross-sectional study from September 1st 2016 to August 31st, 2018. All deliveries that met the eligibility criteria, having chosen and benefited the postpartum intra-uterine device with the new inserter were included. Results: During the 2 years, we recorded 73 cases of insertion of the postpartum intra-uterine device with the new inserter over 7797 clients meeting of the world health organization’s criteria of medical admissibility for the use of an intra-uterine device with a frequency of 0.93%. They were married in 97% of cases, large multiparous in 48% of cases, aged between 30 and 39 years in 62% of cases. We didn’t notice any complications in 96% of cases. Expulsion with 4% was the only complication. The clients didn’t have any side effects in 98% of cases. Conclusion: The insertion of a postpartum intra-uterine device with the new inserter has supplanted the insertion techniques using forceps in our center because of its ease and speed. Its use is worth being popularized to help reduce the unmet need for family planning.展开更多
Double-layer organic electroluminescent devices have been constructed. A new fluorescent dye, 9,10-bis(phenylethynyl)anthracence, was chosen as the dopant which was molecularly dispersed in the polymer film, and green...Double-layer organic electroluminescent devices have been constructed. A new fluorescent dye, 9,10-bis(phenylethynyl)anthracence, was chosen as the dopant which was molecularly dispersed in the polymer film, and green light was observed from the device with luminance of 130cd/m(2) at 17V.展开更多
In the high-frequency microwave photonics field,Radio over Fiber (RoF) technology has become a hot topic in the development of next generation broadband wireless communication technologies.In recent years,based on new...In the high-frequency microwave photonics field,Radio over Fiber (RoF) technology has become a hot topic in the development of next generation broadband wireless communication technologies.In recent years,based on new optoelectronic devices that support RoF technology,several optical generation and receiving techniques of millimeter-wave subcarriers have been developed,including external modulation,radio frequency up-conversion,heterodyning and millimeter-wave modulated optical pulse generator.The development of these technologies will no doubt quicken the pace of commercialization of RoF technology.展开更多
Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters...Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters,as the core technology for energy conversion and control,play a crucial role in enhancing the efficiency and stability of renewable energy systems.This paper explores the basic principles and functions of power electronics converters and their specific applications in photovoltaic power generation,wind power generation,and energy storage systems.Additionally,it analyzes the current innovations in high-efficiency energy conversion,multilevel conversion technology,and the application of new materials and devices.By studying these technologies,the aim is to promote the widespread application of power electronics converters in renewable energy systems and provide theoretical and technical support for achieving sustainable energy development.展开更多
According to the World Health Organization (WHO), men and women older than 50 years present osteoporosis with reduced bone mass, this is one of the major impact morbidities causes in the world. It may be present in th...According to the World Health Organization (WHO), men and women older than 50 years present osteoporosis with reduced bone mass, this is one of the major impact morbidities causes in the world. It may be present in the hip, spine, and wrist. The gold standard technique for osteoporosis diagnosis is the Bone Densitometry (DXA). The evaluation of an electroacoustic device is as an alternative procedure for the validation and diagnosis of osteoporosis. Diagnosis of osteoporosis severity was carried out in 49 females by using the registers of the DEXA’s T-Score values. These were statistically compared with the measurements performed using the electroacoustic device. Non-Significative difference between measurements was found with ANOVA and Chi-square tests and the area for the ROC curve on electroacoustic devices was 0.551. The Bland Altman suggests an excellent concordance between both techniques. This is a non-invasive method that has a proper match with the gold standard. The study suggests that procedure measurements with the electroacoustic device could be implemented as an alternative clinical practice for osteoporosis diagnosis.展开更多
A review of recently explored effects in advanced SOI devices and materials is given.The effects of key device parameters on the electrical and thermal floating body effects are shown for various device architectures....A review of recently explored effects in advanced SOI devices and materials is given.The effects of key device parameters on the electrical and thermal floating body effects are shown for various device architectures.Recent advances in the understanding of the sensitivity of electron and hole transport to the tensile or compressive uniaxial and biaxial strains in thin film SOI are presented.The performance and physical mechanisms are also addressed in multi-gate Si,SiGe and Ge MOSFETs.New hot carrier phenomena are discussed.The effects of gate misalignment or underlap,as well as the use of the back gate for charge storage in double-gate nanodevices and of capacitorless DRAM are also outlined.展开更多
Many animals migrate during the breeding season.It is important to study the patterns of breeding migration of wild animals,especially rare and endangered species.However,current data acquisition methods are too coars...Many animals migrate during the breeding season.It is important to study the patterns of breeding migration of wild animals,especially rare and endangered species.However,current data acquisition methods are too coarse and imprecise for investigating the circadian rhythms of migrations in amphibians.Based on the frustrated total reflection image(FTRI),we developed a new device and recorded the precise migration time of an endangered salamander,Liangshantriton taliangensis.During the breeding period,a total of 33 individuals were effectively recorded.Analysis of the data indicated that the circadian rhythm of breeding migration in L.taliangensis was bimodal,and migration mainly occurred from 05:00 to 13:00(81.82%of the total migration records).The average relative activity intensity index(RAI)of breeding migration peaked in the temperature range of 14.0–16.0°C.With increased average relative air humidity,the activity intensity first increased and then decreased,reaching a peak in the humidity range of 91.0%–97.0%.These results demonstrate that our new device is a viable and accurate method for recording the migration time of target species.It is important to reveal the breeding migration pattern of L.taliangensis,which is important for the conservation of this species.Meanwhile,this new device can be used for field monitoring and conservation studies of amphibians,reptiles and other animals.展开更多
New energy storage devices such as batteries and supercapacitors are widely used in various fields because of their irreplaceable excellent characteristics.Because there are relatively few monitoring parameters and li...New energy storage devices such as batteries and supercapacitors are widely used in various fields because of their irreplaceable excellent characteristics.Because there are relatively few monitoring parameters and limited under-standing of their operation,they present problems in accurately predicting their state and controlling operation,such as state of charge,state of health,and early failure indicators.Poor monitoring can seriously affect the performance of energy storage devices.Therefore,to maximize the efficiency of new energy storage devices without damaging the equipment,it is important to make full use of sensing systems to accurately monitor important parameters such as voltage,current,temperature,and strain.These are highly related to their states.Hence,this paper reviews the sensing methods and divides them into two categories:embedded and non-embedded sensors.A variety of measurement methods used to measure the above parameters of various new energy storage devices such as batteries and super-capacitors are systematically summarized.The methods with different innovative points are listed,their advantages and disadvantages are summarized,and the application of optical fiber sensors is emphasized.Finally,the challenges and prospects for these studies are described.The intent is to encourage researchers in relevant fields to study the early warning of safety accidents from the root causes.展开更多
文摘Contextualization: Emptying the bladder is a challenging problem for the urological community. Intermittent catheterization is the most widely used method to restore bladder emptying mechanism. However, this procedure can have a negative impact on self-image and result in a decline in the quality of life of patients. In this context, the use of a bladder emptying device (SVCATH3D) proposes to be effective and have a positive impact on the quality of life of different patients. Objective: The objective of the study was to evaluate the functionality of a new device for both intermittent and controlled emptying of the bladder in both sexes and ages. Materials and methods: A randomized clinical trial was conducted with 251 patients, with different bladder problems, from March 2013 to January 2023. After randomization, the patients were divided into two groups: Group I (SVCATH3D) and Group II (Clean Intermittent Catheterization). The primary outcome was defined as the impact on quality of life. Data on episodes of urinary tract infection, adverse effects, number of diaper use and treatment costs were analyzed. Results: The apposition of the SVCATH3D was performed on an outpatient basis, with no complications during the procedures. The patients were followed up for 10 years. There was a significant improvement in quality of life when comparing the moments before and after the use of SVCATH3D (p Conclusion: The study using SVCATH3D showed promising results in relation to functionality, showing improvement in quality of life with a reduction in episodes of urinary infection and amount of diapers/day. This allows us to conclude that SVCATH3D can represent an important step in the treatment of patients suffering from various bladder problems both incontinence and affecting emptying mechanism.
文摘Background: In Mali, contraceptive prevalence is low, while the unmet need for family planning is very high. Postpartum contraception can help to significantly reduce these unsatisfied needs. The introduction of the intrauterine device (IUD) in the postpartum quickly encountered problems with the type of forceps used to make the insertions (Kelly or Heart forceps), and also their availability at the various health centers. Thus, in 2016, the Population Services International Mali (PSI-Mali) introduced the insertion of the IUD in the postpartum with the new inserter in order to counter this forceps problem and to contribute to guaranteeing the quality of postpartum IUD insertions. Objectives: They were to determine the frequency, the socio-demographic and clinical characteristics and to report the side effects and the complications. Methods: This was a descriptive and analytical cross-sectional study from September 1st 2016 to August 31st, 2018. All deliveries that met the eligibility criteria, having chosen and benefited the postpartum intra-uterine device with the new inserter were included. Results: During the 2 years, we recorded 73 cases of insertion of the postpartum intra-uterine device with the new inserter over 7797 clients meeting of the world health organization’s criteria of medical admissibility for the use of an intra-uterine device with a frequency of 0.93%. They were married in 97% of cases, large multiparous in 48% of cases, aged between 30 and 39 years in 62% of cases. We didn’t notice any complications in 96% of cases. Expulsion with 4% was the only complication. The clients didn’t have any side effects in 98% of cases. Conclusion: The insertion of a postpartum intra-uterine device with the new inserter has supplanted the insertion techniques using forceps in our center because of its ease and speed. Its use is worth being popularized to help reduce the unmet need for family planning.
文摘Double-layer organic electroluminescent devices have been constructed. A new fluorescent dye, 9,10-bis(phenylethynyl)anthracence, was chosen as the dopant which was molecularly dispersed in the polymer film, and green light was observed from the device with luminance of 130cd/m(2) at 17V.
基金supported by the National Natural Science Foundation of China under Grant No.60871067
文摘In the high-frequency microwave photonics field,Radio over Fiber (RoF) technology has become a hot topic in the development of next generation broadband wireless communication technologies.In recent years,based on new optoelectronic devices that support RoF technology,several optical generation and receiving techniques of millimeter-wave subcarriers have been developed,including external modulation,radio frequency up-conversion,heterodyning and millimeter-wave modulated optical pulse generator.The development of these technologies will no doubt quicken the pace of commercialization of RoF technology.
文摘Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters,as the core technology for energy conversion and control,play a crucial role in enhancing the efficiency and stability of renewable energy systems.This paper explores the basic principles and functions of power electronics converters and their specific applications in photovoltaic power generation,wind power generation,and energy storage systems.Additionally,it analyzes the current innovations in high-efficiency energy conversion,multilevel conversion technology,and the application of new materials and devices.By studying these technologies,the aim is to promote the widespread application of power electronics converters in renewable energy systems and provide theoretical and technical support for achieving sustainable energy development.
文摘According to the World Health Organization (WHO), men and women older than 50 years present osteoporosis with reduced bone mass, this is one of the major impact morbidities causes in the world. It may be present in the hip, spine, and wrist. The gold standard technique for osteoporosis diagnosis is the Bone Densitometry (DXA). The evaluation of an electroacoustic device is as an alternative procedure for the validation and diagnosis of osteoporosis. Diagnosis of osteoporosis severity was carried out in 49 females by using the registers of the DEXA’s T-Score values. These were statistically compared with the measurements performed using the electroacoustic device. Non-Significative difference between measurements was found with ANOVA and Chi-square tests and the area for the ROC curve on electroacoustic devices was 0.551. The Bland Altman suggests an excellent concordance between both techniques. This is a non-invasive method that has a proper match with the gold standard. The study suggests that procedure measurements with the electroacoustic device could be implemented as an alternative clinical practice for osteoporosis diagnosis.
文摘A review of recently explored effects in advanced SOI devices and materials is given.The effects of key device parameters on the electrical and thermal floating body effects are shown for various device architectures.Recent advances in the understanding of the sensitivity of electron and hole transport to the tensile or compressive uniaxial and biaxial strains in thin film SOI are presented.The performance and physical mechanisms are also addressed in multi-gate Si,SiGe and Ge MOSFETs.New hot carrier phenomena are discussed.The effects of gate misalignment or underlap,as well as the use of the back gate for charge storage in double-gate nanodevices and of capacitorless DRAM are also outlined.
基金supported by the National Key Programme of Research and Development,Ministry of Science and Technology(No.2022YFF1301401)the National Natural Science Foundation of China(No.32170428)+2 种基金Research on monitoring technology system of amphibians and reptile in national parks(Research project of the National Park Research Institute)China Biodiversity Observation Networks(Sino BON-Amphibian and Reptile)the Species Conservation Project of Sichuan Liziping National Nature Reserve(2022).
文摘Many animals migrate during the breeding season.It is important to study the patterns of breeding migration of wild animals,especially rare and endangered species.However,current data acquisition methods are too coarse and imprecise for investigating the circadian rhythms of migrations in amphibians.Based on the frustrated total reflection image(FTRI),we developed a new device and recorded the precise migration time of an endangered salamander,Liangshantriton taliangensis.During the breeding period,a total of 33 individuals were effectively recorded.Analysis of the data indicated that the circadian rhythm of breeding migration in L.taliangensis was bimodal,and migration mainly occurred from 05:00 to 13:00(81.82%of the total migration records).The average relative activity intensity index(RAI)of breeding migration peaked in the temperature range of 14.0–16.0°C.With increased average relative air humidity,the activity intensity first increased and then decreased,reaching a peak in the humidity range of 91.0%–97.0%.These results demonstrate that our new device is a viable and accurate method for recording the migration time of target species.It is important to reveal the breeding migration pattern of L.taliangensis,which is important for the conservation of this species.Meanwhile,this new device can be used for field monitoring and conservation studies of amphibians,reptiles and other animals.
基金funded by the Youth Fund of Shandong Province Natural Science Foundation grant number ZR2020QE212Key Projects of Shandong Province Natural Science Foundation grant number ZR2020KF020+2 种基金the Guangdong Provincial Key Lab of Green Chemical Product Technology grant number GC 202111Zhejiang Province Natural Science Foundation grant number LY22E070007National Natural Science Foundation of China grant number 52007170.
文摘New energy storage devices such as batteries and supercapacitors are widely used in various fields because of their irreplaceable excellent characteristics.Because there are relatively few monitoring parameters and limited under-standing of their operation,they present problems in accurately predicting their state and controlling operation,such as state of charge,state of health,and early failure indicators.Poor monitoring can seriously affect the performance of energy storage devices.Therefore,to maximize the efficiency of new energy storage devices without damaging the equipment,it is important to make full use of sensing systems to accurately monitor important parameters such as voltage,current,temperature,and strain.These are highly related to their states.Hence,this paper reviews the sensing methods and divides them into two categories:embedded and non-embedded sensors.A variety of measurement methods used to measure the above parameters of various new energy storage devices such as batteries and super-capacitors are systematically summarized.The methods with different innovative points are listed,their advantages and disadvantages are summarized,and the application of optical fiber sensors is emphasized.Finally,the challenges and prospects for these studies are described.The intent is to encourage researchers in relevant fields to study the early warning of safety accidents from the root causes.
