An Improved Purification Method for Preparation of Basic Nickel Carbonate of High Purity via Chemical Precipitation

The adsorption mechanism of Na^＋, Cl^- and other impurities on the surface of basic nickel carbonate was clarified by electric double layer model. Based on the mechanism, a new purification method was studied. The method can be described as washing-drying-rewashing-drying. The experimental results indicate that the process is very efficient to remove impurities adsorbed by the precipitate when using NiCl2 and Na2CO3 as the raw materials. The finished product＇s contents of sodium and chlorine are both less than 0.01 wt%.

Influence of Sodium Carbonate Amount on Crystalline Phase and Structure Stability for Doping Nickel Hydroxide

Alpha nickel hydroxide has better performances than commercial beta nickel hydroxide. However, the main defect is that α-phase is difficult to synthesize and easily transformed to β-phase Ni（OH）2 upon aging in a strong alkaline solution. In this study, the Al-Co, Al-Yb, Yb-Co and Al-Yb-Co multiple doping was used respectively. By controlling the amount of sodium carbonate, the α-Ni（OH）2 was prepared by ultrasonic-assisted precipitation. And the influence of sodium carbonate on the crystalline phase and structure stability for alpha nickel hydroxide was studied. The results demonstrate that, with increasing amount, the biphase nickel hydroxide transforms to pure alpha nickel hydroxide gradually, and the structure stability is also improved. When the amount of sodium carbonate is 2 g, the sample still keeps α-Ni（OH）2 after being aged for 30 days, for Al-Yb-Co-Ni（OH）2. And when the amount is less than 2 g, the phase transformations exist in the samples with different extents. These results demonstrated that the amount of sodium carbonate is a critical factor to maintain the structural stability of α-Ni（OH）2.

Effects of specific surface area of metallic nickel particles on carbon deposition kinetics

Carbon deposition on nickel powders in methane involves three stages in different reaction temperature ranges. Temperature programing oxidation test and Raman spectrum results indicated the formation of complex and ordered carbon structures at high deposition temperatures. The values of I（D）/I（G） of the deposited carbon reached 1.86, 1.30, and 1.22 in the first, second, and third stages, respectively. The structure of carbon in the second stage was similar to that in the third stage. Carbon deposited in the first stage rarely contained homogeneous pyrolytic deposit layers. A kinetic model was developed to analyze the carbon deposition behavior in the first stage. The rate-determining step of the first stage is supposed to be interfacial reaction. Based on the investigation of carbon deposition kinetics on nickel powders from different resources, carbon deposition rate is suggested to have a linear relation with the square of specific surface area of nickel particles.

Effect of Nickel Distributions Embedded in Amorphous Carbon Films on Transport Properties

Electrical properties of C/Ni films are studied using four mosaic targets made of pure graphite and stripes of nickel with the surface areas of 1.78,3.21,3.92 and 4.64%.The conductivity data in the temperature range of400-500 K shows the extended state conduction.The conductivity data in the temperature range of 150-300 K shows the multi-phonon hopping conduction.The Berthelot-type conduction dominates in the temperature range of 50-150 K.The conductivity of the films in the temperature range about 〈 50 K is described in terms of variable-range hopping conduction.In low temperatures,the localized density of state around Fermi level（F）for the film deposition with 3.92% nickel has a maximum value of about 56.2×10^（17）cm^（-3）eV^（-1） with the minimum average hopping distance of about 3.43 × 10^（-6） cm.

Influences of NiCO_3 content on the microstructure and magnetic properties of Ni_(0.5)Zn_(0.5)Fe_2O_4 powders prepared by SHS

Stoichiometric Ni0.5Zn0.5Fe2O4 powders were produced by self-propagating high temperature synthesis （SHS）. The effects of NiCO3 content in the raw materials on the microstructure and magnetic properties of Ni-Zn ferrite powders were systematically studied. The Ni0.5Zn0.5Fe2O4 powders were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The magnetic properties of the powders were evaluated by vibrating sample magnetometry （VSM）. The results show that the introduction of NiCO3 into reactants improves the con- version percentage and refines the Ni0.5Zn0.5Fe2O4 particles. The increase of NiCO3 content enhances the magnetic properties of Ni0.5Zn0.5Fe2O4. Particularly, the saturation magnetization reaches the maximum when the NiCO3 content is 3 at.%.

High activity of a Pt decorated Ni/C nanocatalyst for hydrogen oxidation

The Pt decorated Ni/C nanocatalysts were prepared for hydrogen oxidation reaction（HOR） in fuel cell.By regulating the contents of Pt and Ni in the catalyst,both the composition and the structure affected the electrochemical catalytic characteristics of the Pt-Ni/C catalysts.When the Pt mass content was 3.1% percent and that of Ni was 13.9% percent,the Pt-Ni/C-3 catalyst exhibited a larger electrochemically active surface area and a higher exchange current density toward HOR than those of pure supported platinum sample.Our study demonstrates a feasible approach for designing the more efficient catalysts with lower content of noble metal for HOR in fuel cell.

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.