Intrinsic kinetics of catalytic hydrogenation of 2-nitro-4-acetylamino anisole to 2-amino-4-acetylamino anisole over Raney nickel catalyst

The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remains obscure.In this work,the kinetic models including power-law model and Langmuir-Hinshelwood-Hougen-Watson(LHHW)model of NMA hydrogenation to AMA catalyzed by Raney nickel catalyst were investigated.All experiments were carried out under the elimination of mass transfer resistance within the temperature range of 70–100°C and the hydrogen pressure of 0.8–1.5 MPa.The reaction was found to follow 0.52-order kinetics with respect to the NMA concentration and 1.10-order kinetics in terms of hydrogen pressure.Based on the LHHW model,the dual-site dissociation adsorption of hydrogen was analyzed to be the rate determining step.The research of intrinsic kinetics of NMA to AMA provides the guidance for the reactor design and inspires the catalyst modification.

CO_2 reforming of methane over nickel catalysts supported on nanocrystalline MgAl_2O_4 with high surface area

In this paper dry reforming of methane （DRM） was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesized by a co-precipitation method with the addition of pluronic P123 triblock copolymer as surfactant, and employed as catalyst support. The prepared samples were characterized by X-ray diffraction （XRD）, N2 adsorption, H2 chemisorption, temperature-programmed reduction （TPR）, temperature-programmed oxidation （TPO）, temperature- programmed desorption （TPD） and transmission and scanning electron microscopies （TEM, SEM） techniques. The obtained results showed that the catalyst support has a nanocrystalline structure （crystal size： about 5 nm） with a high specific surface area （175 m2 g-1） and a mesoporous structure. Increasing in nickel content decreased the specific surface area and nickel dispersion. The prepared catalysts showed high catalytic activity and stability during the reaction. SEM analysis revealed that whisker type carbon deposited over the spent catalysts and increasing in nickel loading increased the amount of deposited carbon. The nickel catalyst with 7 wt% of nickel showed the highest catalytic activity.

Nickel catalysts supported on MgO with different specific surface area for carbon dioxide reforming of methane

In this paper, three kinds of MgO with different specific surface area were prepared, and their effects on the catalytic performance of nickel catalysts for the carbon dioxide reforming of methane were investigated. The results showed that MgO support with the higher specific surface area led to the higher dispersion of the active metal, which resulted in the higher initial activity. On the other hand, the specific surface area of MgO materials might not be the dominant factor for the basicity of support to chemisorb and activate CO2, which was another important factor for the performance of catalysts. Herein, Ni/MgO(CA) catalyst with proper specific surface area and strong ability to activate CO2exhibited stable catalytic property and the carbon species deposited on the Ni/MgO(CA) catalyst after 10 h of reaction at 650 ?C were mainly activated carbon species.

Study on the Reaction Mechanism for Carbon Dioxide Reforming of Methane over supported Nickel Catalyst

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalyst were extensively investigated by TPSR and TPD experiments. It showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalyst, while CO2 adsorbed on the catalyst weakly and only existed in one kind of adsorption state. Then the mechanism of interaction between the species dissociated from CH4 and CO2 during reforming was proposed.

Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming

The paper reports the development of cement clinker-supported nickel （with metal loadings of 5 wt%, 10 wt%, 15 wt% and 20 wt%） catalysts for glycerol dry （CO2） reforming reaction. XRF results showed that CaO constituted 62.0% of cement clinker. The physicochemical characterization of the catalysts revealed 32-folds increment of BET surface area （SBET） with the addition of nickel metal into the cement clinker, which was also corroborated by FESEM images. Significantly, XRD results suggested different types of Ni oxides formation with Ni loading, whilst Ca3SiO5 and Ca2Al0.67Mn0.33FeO5 were the main crystallite species for pure cement clinker. Temperature-programmed reduction analysis yielded three domains of H2 reduction peaks, viz. centered at approximately 750 K referred to as type-Ⅰ peaks, another peaks at 820 K denoted as type-Ⅱ peaks and the highest reduction peaks, type-Ⅲ recorded at above 1000 K. 20 wt% Ni was found to be the best loading with the highest XG and H2 yield, whilst the lowest methanation activity. Syngas with lower H2/CO ratios （0.6 to 1.5） were readily produced from glycerol dry reforming at CO2-to-Glycerol feed ratio （CGR） of unity. Nonetheless, carbon deposit comprised of whisker type （Cv） and graphitic-like type （Cc） species were found to be in majority on 20 wt%Ni/CC catalysts.

Selective Hydrogenation of Maleic Anhydride to Succinic Anhydride over Nickel Catalyst Supported on Carbon Microspheres

The colloidal carbon microspheres(CMS)were prepared by the hydrothermal method.The nickel catalysts supported on carbon microspheres(Ni/CMS)were further prepared and were characterized by the Fourier transform infrared spectroscopy(FTIR),the X-ray diffraction(XRD),the scanning electron microscopy(SEM),the transmission electron microscopy(TEM),and the N_(2)adsorption technique.The selective hydrogenation of maleic anhydride(MA)to succinic anhydride(SA)over the Ni/CMS catalysts was investigated.The results indicated that the Ni/CMS catalyst,which was prepared with glucose as carbon source and calcined at 500℃,exhibited the best performance.The hydrogen pressure,reaction temperature,and reaction time could significantly affect the conversion of maleic anhydride during the hydrogenation reaction.A 98.4%conversion of MA and an 100%selectivity to SA were achieved over the Ni/CMS catalyst in acetic anhydride solvent under mild conditions covering a temperature of 90℃,a H2 pressure of 1.0 MPa,and a reaction time of 3 h.

Effect of initial nickel particle size on stability of nickel catalysts for aqueous phase reforming

The deactivation behavior by crystallite growth of nickel nanoparticles on various supports（carbon nanofibers, zirconia, Si C, α-Al2O3 and γ-Al2O3） was investigated in the aqueous phase reforming of ethylene glycol. Supported Ni catalysts of ~10 wt% were prepared by impregnation of carbon nanofibers（CNF）,Zr O2, SiC, γ-Al2O3 and α-Al2O3. The extent of the Ni nanoparticle growth on various support materials follows the order CNF ~ ZrO2〉 SiC 〉 γ-Al2O3〉〉 α-Al2O3 which sequence, however, was determined by the initial Ni particle size. Based on the observed nickel leaching and the specific growth characteristics; the particle size distribution and the effect of loading on the growth rate, Ostwald ripening is suggested to be the main mechanism contributing to nickel particle growth. Remarkably, initially smaller Ni particles（~12 nm） supported on α-Al2O3 were found to outgrow Ni particles with initially larger size（~20 nm）. It is put forward that the higher susceptibility with respect to oxidation of the smaller Ni nanoparticles and differences in initial particle size distribution are responsible for this behavior.

ETHYLENE POLYMERIZATION AND COPOLYMERIZATION WITH POLAR MONOMERS BY A NEUTRAL NICKEL CATALYST COMBINED WITH CO-CATALYST OF Ni(COD)_2 OR AL(i-Bu)_3

A neutral nickel(Ⅱ)catalyst D,{[O-(3-cyclohexyl)(5-Cl)C_6H_2-ortho-C(H)=N-2,6-C_6H_3(i-Pr)_2]Ni(Ph_3P)(Ph)}hasbeen synthesized and characterized by IH-NMR,FTIR and elemental analysis.The results indicate that Al(i-Bu)_3 is aneffective cocatalyst for the neutral nickel catalyst.With bis(1,5-cyclooctadiene)nickel(0)[Ni(COD)_2]or Al(i-Bu)_3 as a co-catalyst,the neutral nickel catalyst D is active for ethylene polymerisation and copolymerisation with polar monomers(tert-butyl 10-undecenoate(BU),methyl 10-undecenoate(MU),allyl alcohol(AA)and 4-penten-1-ol(PO))under mild conditions.The resulting polymers were characterized by (?)H-NMR,FTIR,DSC,and GPC.From the comparative studies,Ni(COD)_2 ismore active than Al(i-Bu)_3 for ethylene homopolymerization,while Al(i-Bu)_3 is more effective than Ni(COD)_2 for ethylenecopolymerisation with polar monomers.The polymerization parameters which affect both the catalytic activity and propertiesof the resulting polyethylene were investigated in detail.Under the conditions of 20 μmol catalyst D and Ni(COD)_2/D=3(molar ratio) in 30 mL toluene solution at 45℃,12×105 Pa ethylene for 20 min,the polymerization activity reaches ashigh as 7.29×105 gPE.(mol.Ni.h)^(-1) and M_η,is 7.16×104 g.mol^(-1).For ethylene copolymerization with polar monomers,theeffect of comonomer concentrations was examined.As high as 0.97 mol% of MU,1.06 mol% of BU,1.04 mol% of AA and1.37 mol% of PO were incorporated into the polymer,respectively,catalyzed by D/Al(i-Bu)_3 system.

Dry reforming reaction over nickel catalysts supported on nanocrystalline calcium aluminates with different CaO/Al_2O_3 ratios

Nanocrystalline calcium aluminates with different CaO/Al2O3 ratios were prepared by a facile co-precipitation method using Poly（ethylene glycol）-block-poly（propylene glycol）-block-poly（ethylene glycol） （PEG-PPG-PEG, MW： 5800） as a surfactant. They were employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by X-ray diffraction （XRD）, N2 adsorption （BET）, temperature-programmed reduction and oxidation （TPR-TPO）, and scanning electron microscopy （SEM） techniques. Catalysts showed a relatively high catalytic activity and stability. TPR analysis revealed that the catalysts with higher CaO content are more difficult to be reduced. TPO analysis showed that the 5 wt%Ni/CA and 5 wt%Ni/C12A7 catalysts with higher CaO amount were effective against coke deposition.

Study on ethylene/1-hexene copolymerization catalyzed by α-diimine nickel catalysts with different ligands--Dedicated to Professor Xiuwen Han on the occasion of her 80th birthday

The structure of polyolefin has an important influence on its performance and application.Ethylene/1-hexene copolymerization is one of the important ways to control the structure of the polyolefin.However,research on the ethylene/1-hexene copolymerization catalyzed by nickel complexes with different steric ligands remains to be refined.Here,three α-dimine nickel catalysts are used to study the ligand effect on catalytic performance in the ethylene/1-hexene copolymerization.Reaction activity,molecular weight,phase-transition temperature and branching density of the resultant copolymer are measured to evaluate the catalytic performance.The results indicate that the steric ligands could exert great effect on the copolymerization.As for the chemical valence of Ni species,detailed EPR demonstrate that the presence of excess xo-catalyst can reduce Ni(Ⅱ)to the lower valence and affect the catalytic performance.

Effects of the Supports on Activity of Supported Nickel Catalysts for Hydrogenation of m-Dinitrobenzene to m-Phenylenediamine

The hydrogenation of m-dinitrobenzene to m-phenylenediamine in liquid phase was studied with the nickel catalysts supported on SiO2, TiO2, γ-Al2O3, MgO and diatomite carriers. Based on the experiments of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR), temperature-programmed desorption of hydrogen (H2-TPD) and activity evaluation, the physico-chemical and catalytic properties of the catalysts were investigated. Among the catalysts tested, the SiO2 supported nickel catalyst showed the highest activity and selectivity towards m-phenylenediamine, over which 97.3% m-dinitrobenzene con-version and 95.1% m-phenylenediamine yield were obtained at 373K under hydrogen pressure of 2.6MPa after re-action for 6 h when using ethanol as solvent. Although TiO2 and diatomite supported nickel catalysts also presented high activity, they had lower selectivity towards m-phenylenediamine. As for γ-Al2O3 and MgO supported catalysts were almost inactive for the object reaction. It was shown that both the activity and selectivity of the catalysts were strongly depended on the interaction between nickel and the support. The higher activities of Ni/SiO2, Ni/TiO2 and Ni/diatomite could be attributed to the weaker metal-support interaction, on which Ni species presented as crystal-lized Ni metal particles. On the other hand, there existed strong metal-support interaction in Ni/MgO and Ni/γ-Al2O3, which causes these catalysts more difficult to be reduced and the availability of Ni active sites de-creased, resulting in their low catalytic activity.

Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH_3 Decomposition in Fuel Cell Applications

A sinter-locked three-dimensional network of microfibrous nickel catalyst has been fabricated based on wet layup papermaking and sintering processes and this novel approach permits the production of -11 W fuel cell power H2 via NH3 decomposition with a conversion of 97% at 750 ℃ in a bed of 0.6 cm^3.

Highly Active New α-Diimine Nickel Catalyst for Polymerization of Ethylene

A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}dibromo- nickel were successfully synthesized, and characterized by 1H NMR, 13C NMR, Fourier transform infrared spectroscope（FTIR）, elemental analysis and X-ray photoelectron spectroscopy（XPS）. α-Diimine ligand 1b, bis[N,N′-（2,6- dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2b, {bis[N,N′-（2,6-dimethyl- phenyl）imino]-2,3-butanediylidene}dibromonickel were also synthesized and characterized for comparison. The pre-catalyst 2a with sterically bulky, electron-donating group tert-butyl, activated by diethylaluminum chloride （DEAC） and tested in the polymerization of ethylene, was very highly active[2.01×107 g PE/（mol Ni？h？0.1 MPa）] and led to a very highly branched polyethylene（ca. 35―103 branches/1000 C）. The state of the polyethylene obtained varied from plastic, elastomer polymers to the oil-like hyperbranched polymers.

Phosphine/Benzocyclone-based Neutral Nickel Catalysts for Ethylene Polymerization and Copolymerization with Polar Monomers

The efficient copolymerization of olefin with polar monomers using nickel-based catalysts presents a longstanding challenge. In this contribution, three phosphine-benzocyclone ligands and corresponding neutral nickel catalysts(Ni1: Ar = Ph;Ni2: Ar = 2-(C_(6)H_(5))C_(6)H_(4);Ni3: Ar = 2-[2',6'-(Me O)_(2)-C_(6)H3]C_(6)H_(4)) were prepared and applied for the ethylene polymerization and copolymerization with polar monomers without any cocatalyst. The bulky substituent groups in complexes Ni2 and Ni3 contributed to high catalytic activities(up to 7.24×10^(6) and 9.04×10^(6)g·mol Ni^(-1)·h^(-1), respectively), and produced high-molecular-weight polyethylene(Mw up to 545.7 k Da). Complex Ni3 exhibited high activities for ethylene polymerization at the level of 10^(6) g·mol Ni^(-1)·h^(-1) across a wide range from 30 ℃ to 120 ℃, exhibiting excellent high temperature tolerance. These nickel complexes were also effectively employed in the copolymerization of ethylene with methyl acrylate, ethyl acrylate, butyl acrylate and lauryl acrylate, producing copolymers with high molecular weights(Mw up to 80.5 k Da) and high polar monomer incorporation(up to 8.2 mol%). Microstructure analyses revealed that the introduction of large sterically hindered substituents facilitated the incorporation of polar functional units into the polymer backbone. This study demonstrates the potential of these nickel-based catalysts for efficient copolymerization of olefin with polar monomers.

Concerted Steric and Electronic Strategy in Thermostable Salicylaldiminato Nickel Catalysts for Ethylene(Co)polymerization

Olefin polymerization is one of the most im portant chemical reactions in industry.This work presents a strategy that emphasizes the synergistic meta/poro-steric hindrance of N-aryl groups and electronic effects in newly synthesized neutral salicylaldiminato nickel catalysts.These nickel(Ⅱ)catalysts exhibit exceptional thermostability,ranging from 30℃to 130℃,demonstrating enhanced catalytic activities and broadly regulated polyethylene molecular weights(3-341 kg·mol^(-1))and controlled polymer branch density(2-102 brs/1000C).The preferred catalyst Ni3 with concerted steric and electronic effects enables the production of solid-state semi-crystalline polyethylene materials at temperatures below 90℃.Notably,Ni3 exhibits an impressive tolerance of 110℃and can withstand even the challenging polymerization temperature of 130℃,leading to the production of polyethylene wax and oil.Also,functionalized polyethylene is produced.

Macrocyclic Binuclearα-Diimine Nickel Catalysts for Ethylene Polymerization

Polyolefins are globally important plastics.Molecular weight and molecular weight distribution are two key parameters for determining the properties of polyolefin materials.In this contribution,we develop a strategy for combining the macrocyclic framework and the binuclear effect into the benchmarkα-diimine late transition metal catalysts,and thus macrocyclic binuclearα-diimine nickel catalysts(Ni_(2)-Me and Ni_(2)-iPr)are prepared.Compared to the classical Brookhart's acyclic mononuclearα-diimine nickel analogues(Ni_(1)-Me and Ni_(1)-iPr),these nickel catalysts exhibit enhanced thermostability(up to 110℃)and produce polyethylenes with higher molecular weights(up to 7 times)and lower branching densities(as low as 9 branches/1000C)in methylaluminoxane(MAO)activated ethylene polymerization.This translates into the ability of the catalyst to afford more linear high molecular weight polyethylenes.In particular,bimodal polyethylenes with broad molecular weight distributions(Mw/Mn=8.08-14.66)are generated by the sole catalyst.This work affords diverse polyethylenes.

Trinuclear Nickel Catalyst for Water Oxidation:Intramolecular Proton-Coupled Electron Transfer Triggered Trimetallic Cooperative O-O Bond Formation

We report a molecular trinuclear nickel(TNC-Ni)catalyst for water oxidation that exhibited high catalytic performance and stability under neutral conditions(pH 7).Electrochemical studies disclosed that cooperation among the three nickel sites plays a vital role in both charge accumulation and O-O bond formation.This TNC-Ni catalyst could accomplish 4e−oxidation of water by involving all three nickel sites and the O-O bond formation was triggered by a charge distribution process from 5 to 5_(dp) via proton-coupled electron transfer.

Silica Modulation of Raney Nickel Catalysts for Selective Hydrogenation

Selective hydrogenation over earth-abundant metal catalysts is challenging but particularly valuable for practical applications in heterogeneous catalysis.Herein,we demonstrate that the catalytic selectivity of the commercial Raney nickel catalyst can be greatly tuned by modulation of the nickel surface by silica.Using quinoline hydrogenation as a model,we show that the silica-modified Raney nickel catalysts exhibit good activity,excellent selectivity,and long stability,whereas the undesired over-hydrogenation reactions are effectively hindered.In contrast,the pristine Raney nickel catalyst shows inferior selectivity for the targeted product.Mechanistic studies confirm a positive role of silica to facilitate the desorption of 1,2,3,4-tetrahydroquinoline from the catalyst surface,thus enhancing the product selectivity.

Research Progress of Nickel Iron Bimetallic Series Electrocatalytic Materials

Hydrogen energy has become one of the recognized clean energy sources worldwide due to its advantages such as low cost,renewable energy,and green environmental protec-tion.Electrolytic water is currently one of the most promising solutions for providing hydrogen fuel.Nickel iron bimetallic electrocatalysts have abundant sources,low cost,clean and pollution-free properties,and strong catalytic performance,This article mainly reviews the development and research of bimetallic nickel iron oxides and nickel iron alloys in recent years,and explores their synthesis methods,properties,and stability in depth.

Design and Theoretical Study of Nickel Catalysts for Syndiotactic Polyolefins

A nickel catalyst was modeled with ligand L^2, [NH = CH-CH = CH-O]^-, whichshould have potential use as a syndiotactic polyolefin catalyst, and the reaction mechanim wasstudied by theoretical calculations using the density functional method at the B3LYP/LANL2MB level.The mechanism involves the formation of the intermediate [NiL^2Me]^+, in which the metal occupies aT-shaped geometry. This intermediate has two possible structures with the methyl group trans eitherto the oxygen or to the nitrogen atom of L^2. The results show that both structures can lead to thedesired product via similar reaction paths, A and B. Thus, the polymerization could be considered astaking place either with the alkyl group occupying the position trans to the Ni-O or trans to theNi-N bond in the catalyst. The polymerization process thus favors the catalysis of syndiotacticpolyolefins. The syndiotactic synthesis effects could also be enhanced by variations in the ligandsubstituents. From energy considerations, we can conclude that it is more favorable for the methylgroup to occupy the trans-O position to form a complex than to occupy the trans-N position. Frombond length considerations, it is also more favoured for ethene to occupy the trans-O position thanto occupy the trans-N position.