Nd-Al codoped amorphous nickel hydroxide powders were synthesized by microemulsion precipitation method combined with rapid freezing technique.The microstructure of the prepared samples was analyzed with X-ray diffrac...Nd-Al codoped amorphous nickel hydroxide powders were synthesized by microemulsion precipitation method combined with rapid freezing technique.The microstructure of the prepared samples was analyzed with X-ray diffractometer(XRD),scanning electron microscopy(SEM),and Raman spectroscopy.The electrochemical performances of the prepared samples were characterized with charge/discharge test,cyclic voltammetry,and electrochemical impedance spectra.The results showed that the codoping of Nd-Al resulted in more st...展开更多
The high density nano-crystalline multiphase nickel hydroxide containing at least three doping elements was synthesized and its electrochemical characteristics were studied. The electrochemical behavior of the high de...The high density nano-crystalline multiphase nickel hydroxide containing at least three doping elements was synthesized and its electrochemical characteristics were studied. The electrochemical behavior of the high density spherical multiphases α-Ni(OH)2 were also investigated. The results show that the structure of the material is a mixed phase of α-Ni(OH)2 and β-Ni(OH)2, which has a the same stabilized structure as α-Ni(OH)2 during long-term charge/discharge process. High density spherical multiphases α-Ni(OH)2 have a much better redox reversibility, a much lower oxidation potential of Ni(Ⅱ) than the corresponding oxidation state in the case of β-Ni(OH)2, and a much higher reduction potential. They exchange one electron during electrochemical reaction and have a higher proton diffusion coefficient. The mechanism of the electrode reaction is proton diffusion, and the proton diffusion coefficient is 5.67×10?10 cm2/s. Moreover, they reveal a higher discharge capacity than β-Ni(OH)2/β-NiOOH because they exchange one electron per nickel atom during charge/discharge process.展开更多
Chemically precipitated β type nickel hydroxide powder was surface modified by electroless deposition of Co Zn coatings,and physical properties of both the modified and unmodified nickel hydroxide were characterized ...Chemically precipitated β type nickel hydroxide powder was surface modified by electroless deposition of Co Zn coatings,and physical properties of both the modified and unmodified nickel hydroxide were characterized by scanning electron microscopy (SEM), specific surface area (BET), X ray diffraction (XRD) and X ray photoelectron spectroscopy (XPS). It has been found that Co and Zn components of the surface electroless coatings exist in the oxidized state. Electrochemical performances of pasted nickel electrodes using the modified nickel hydroxide as an active material were investigated, and compared with those of the electrodes prepared with the unmodified nickel hydroxide. Charge/discharge tests show that the modified nickel hydroxide electrodes exhibit better performances in the charge efficiency, specific discharge capacity and active material utilization. Their resistance to swelling with cycling is also superior to that of the unmodified nickel hydroxide electrodes. Cyclic voltammetric (CV) studies indicate that the modified electrodes have a higher electrochemical activity, and the porous pasted nickel electrodes have some distinguished CV characteristics in comparison with those of the thin film nickel electrodes.展开更多
Nickel hydroxide is widely used as cathode materials in nickel-metal secondary batteries.In this work,Mn-substituted nickel hydroxide samples with a special α/βmixed phase structure were synthesized by chemical co-p...Nickel hydroxide is widely used as cathode materials in nickel-metal secondary batteries.In this work,Mn-substituted nickel hydroxide samples with a special α/βmixed phase structure were synthesized by chemical co-precipitation method.The physical properties were char-acterized by X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),differential scanning calorimetry(DSC)and field emission scanning electron microscopy(FE-SEM).The results show that the structure of the samples and the amount of intercalated anions and water molecules are highly related to the content of the Mn substituted.Their electrochemical performances were characterized by charge/discharge tests and electrochemi-cal cycle tests.The results demonstrate that the Mn-sub-stituted samples with a α/β mixed phase structure perform a much higher discharge capacity than normal β-nickel hydroxide.The specific discharge capacity reaches 330 mAh·g^(-1) after 50 cycles of charge/discharge in charging rate of 0.2C under ambient temperature.Mean-while,the samples show no capacity loss in electrochem-ical cycles,which indicates that the mixed phase nickel hydroxide maintains high structure stability.展开更多
A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results...A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.展开更多
Nano-scale Ni（OH）2 doped with Zn was prepared by precipitation transformation method and characterized by XRD and TEM. The electrochemical performance was investigated by cyclic voltammetry （CV） and constant curre...Nano-scale Ni（OH）2 doped with Zn was prepared by precipitation transformation method and characterized by XRD and TEM. The electrochemical performance was investigated by cyclic voltammetry （CV） and constant current technology. The measurement results indicate that the lattice parameters of nano-scale Ni（OH）2 are changed and the agglomeration of particles becomes obvious with the increased Zn-doped content. Compared with un-doped one, the discharge specific capacities ofnano-scale Ni（OH）2 doped with 10% Zn are enhanced by 8% and 6%, respectively, at the discharge rate of 0.2C and 3C. After 110 cycles, the discharge specific capacity of the sample doped with 10% zinc is still above 85% of its initial capacity discharged at 0.2C. Therefore, a suitable Zn-doped content is beneficial to improving the discharge performance of nano-scale Ni（OH）2.展开更多
基金supported by the National Natural Science Foundation of China (20563001)Guangxi Science Research and Technology Developing Foundation (05112001-2A1,0842003-12,0842003-15)Guangxi Natural Science Foundation (0991247)
文摘Nd-Al codoped amorphous nickel hydroxide powders were synthesized by microemulsion precipitation method combined with rapid freezing technique.The microstructure of the prepared samples was analyzed with X-ray diffractometer(XRD),scanning electron microscopy(SEM),and Raman spectroscopy.The electrochemical performances of the prepared samples were characterized with charge/discharge test,cyclic voltammetry,and electrochemical impedance spectra.The results showed that the codoping of Nd-Al resulted in more st...
文摘The high density nano-crystalline multiphase nickel hydroxide containing at least three doping elements was synthesized and its electrochemical characteristics were studied. The electrochemical behavior of the high density spherical multiphases α-Ni(OH)2 were also investigated. The results show that the structure of the material is a mixed phase of α-Ni(OH)2 and β-Ni(OH)2, which has a the same stabilized structure as α-Ni(OH)2 during long-term charge/discharge process. High density spherical multiphases α-Ni(OH)2 have a much better redox reversibility, a much lower oxidation potential of Ni(Ⅱ) than the corresponding oxidation state in the case of β-Ni(OH)2, and a much higher reduction potential. They exchange one electron during electrochemical reaction and have a higher proton diffusion coefficient. The mechanism of the electrode reaction is proton diffusion, and the proton diffusion coefficient is 5.67×10?10 cm2/s. Moreover, they reveal a higher discharge capacity than β-Ni(OH)2/β-NiOOH because they exchange one electron per nickel atom during charge/discharge process.
文摘Chemically precipitated β type nickel hydroxide powder was surface modified by electroless deposition of Co Zn coatings,and physical properties of both the modified and unmodified nickel hydroxide were characterized by scanning electron microscopy (SEM), specific surface area (BET), X ray diffraction (XRD) and X ray photoelectron spectroscopy (XPS). It has been found that Co and Zn components of the surface electroless coatings exist in the oxidized state. Electrochemical performances of pasted nickel electrodes using the modified nickel hydroxide as an active material were investigated, and compared with those of the electrodes prepared with the unmodified nickel hydroxide. Charge/discharge tests show that the modified nickel hydroxide electrodes exhibit better performances in the charge efficiency, specific discharge capacity and active material utilization. Their resistance to swelling with cycling is also superior to that of the unmodified nickel hydroxide electrodes. Cyclic voltammetric (CV) studies indicate that the modified electrodes have a higher electrochemical activity, and the porous pasted nickel electrodes have some distinguished CV characteristics in comparison with those of the thin film nickel electrodes.
基金financially supported by the National Natural Science Foundation of China (No.21403015)
文摘Nickel hydroxide is widely used as cathode materials in nickel-metal secondary batteries.In this work,Mn-substituted nickel hydroxide samples with a special α/βmixed phase structure were synthesized by chemical co-precipitation method.The physical properties were char-acterized by X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),differential scanning calorimetry(DSC)and field emission scanning electron microscopy(FE-SEM).The results show that the structure of the samples and the amount of intercalated anions and water molecules are highly related to the content of the Mn substituted.Their electrochemical performances were characterized by charge/discharge tests and electrochemi-cal cycle tests.The results demonstrate that the Mn-sub-stituted samples with a α/β mixed phase structure perform a much higher discharge capacity than normal β-nickel hydroxide.The specific discharge capacity reaches 330 mAh·g^(-1) after 50 cycles of charge/discharge in charging rate of 0.2C under ambient temperature.Mean-while,the samples show no capacity loss in electrochem-ical cycles,which indicates that the mixed phase nickel hydroxide maintains high structure stability.
文摘A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.
基金Project(BK2008591) supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(2009RFQXG065) supported by Harbin Special Foundation of Technological Innovation Talent,China
文摘Nano-scale Ni（OH）2 doped with Zn was prepared by precipitation transformation method and characterized by XRD and TEM. The electrochemical performance was investigated by cyclic voltammetry （CV） and constant current technology. The measurement results indicate that the lattice parameters of nano-scale Ni（OH）2 are changed and the agglomeration of particles becomes obvious with the increased Zn-doped content. Compared with un-doped one, the discharge specific capacities ofnano-scale Ni（OH）2 doped with 10% Zn are enhanced by 8% and 6%, respectively, at the discharge rate of 0.2C and 3C. After 110 cycles, the discharge specific capacity of the sample doped with 10% zinc is still above 85% of its initial capacity discharged at 0.2C. Therefore, a suitable Zn-doped content is beneficial to improving the discharge performance of nano-scale Ni（OH）2.
