Tje adsorption bchavior and mechanism of a novel chelate resin,macroporous phosphonic acid resin（PAR）for Ni（Ⅱ）were imestigated.The stotically saturated adsorption capacity is 64.3mg·g^-1 resin at 298K in HAc...Tje adsorption bchavior and mechanism of a novel chelate resin,macroporous phosphonic acid resin（PAR）for Ni（Ⅱ）were imestigated.The stotically saturated adsorption capacity is 64.3mg·g^-1 resin at 298K in HAc-NaAc medium.The Ni（Ⅱ）adsorbed on PAR can be eluted by 0.5mal·L^-1 HCl and the elution percentage reaches 96.6%.The resin can be regenerated and reused without abvious decrease in adsorption capacity.The apparent adsorption rate constant is k298=2.6×10^-5s^-1.The adsorption behavior of PAR for Ni（Ⅱ）obeys the Freundllich isotherm.The thermodynamie adsorption parameters.enthalpy change △H,free energy change △G and entropy change △S of PAR for Ni（Ⅱ）are 3.36kJ·mol^-1,-5.47kJ·mol^-1 and 29.6J·mol^-1·K^-1,respectively.The apparent activation energy is Ea=12.2kJ·mol^-1,The molar coordination ratio of the functional group of PAR to Ni（Ⅱ）is about 4：1.The adsorption mechanism of PAR for Ni（Ⅱ）was examined by a chemical method and IR spectrometry.展开更多
A new configuration integrated ion exchange effect with both electro-migration and electrochemical reaction in a single cell was developed to effectively retrieve metal ions from simulated wastewater using ion exchang...A new configuration integrated ion exchange effect with both electro-migration and electrochemical reaction in a single cell was developed to effectively retrieve metal ions from simulated wastewater using ion exchange resins without additive chemicals. By simply assembling cation exchange resins and anion exchange resins separated by homogeneous membranes, we found that the system will always be acidic in the concentrate compartment so that ion exchange resins could be in-situ regenerated without hydroxide precipitation. Such a realizable design will be really suitable for wastewater purification.展开更多
Ni-doped phenol resin was prepared with 1∶100 mass ratio of Ni（ NO_3）_2·6H_2O to thermosetting phenol resin to optimize the structure and properties of pyrolytic carbon derived from phenol resin and increase i...Ni-doped phenol resin was prepared with 1∶100 mass ratio of Ni（ NO_3）_2·6H_2O to thermosetting phenol resin to optimize the structure and properties of pyrolytic carbon derived from phenol resin and increase its carbon yield. The specimens were cured at 200 ℃ and carbonized under different atmospheres（ carbon-embedded atmosphere and Ar atmosphere） and at different temperatures（ 600,800,1000 and 1200 ℃） for3 h,respectively. The carbon yield was measured. Thermal decomposition characteristics of Ni-doped phenol resin,and the oxidation resistance,phase composition and microstructure of pyrolytic carbon were characterized by differential scanning calorimetry,X-ray diffraction,energy dispersive spectroscopy, scanning electron microscopy and transmission electron microscopy. The results show that the carbon yield of Ni-doped phenol resin carbonized at800 or 1 000 ℃ is increased significantly,compared with that without any dopants. The graphitization degree of pyrolytic carbon structure derived from Ni-doped phenol resin increases with the increase of carbonization temperature. The massive multi-wall carbon nanotubes of 50-100 nm in diameter and of micrometre scale in length are generated at 1000 ℃. Compared with the carbonembedded atmosphere,carbon nanotubes can be more easily generated in Ar atmosphere,resulting in higher carbon yield and degree of crystallinity of the pyrolyticcarbon derived from Ni-doped phenol resin. The oxidation resistance of the pyrolytic carbon derived from Ni-doped phenol resin at 1200 ℃ is improved significantly and its highest oxidation temperature is increased by about 84℃,compared with that from Ni free phenol resin.展开更多
Poly(acrylamide-acrylic acid-dimethyl amino ethylmethacrylate), p(AM-AA-DMAEM) and Poly(acrylamide-acrylic acid)-ethylene diamine tetracetic acid disodium, p(AM-AA)-EDTANa2 were prepared by gamma radiation-induced tem...Poly(acrylamide-acrylic acid-dimethyl amino ethylmethacrylate), p(AM-AA-DMAEM) and Poly(acrylamide-acrylic acid)-ethylene diamine tetracetic acid disodium, p(AM-AA)-EDTANa2 were prepared by gamma radiation-induced template polymerization technique. The prepared polymeric materials were used for the sorption of Ga(III), Cu(II), Ni(II) and Zn(II) in aqueous solution. The effect of pH, weight of resins, metal ion concentrations and contact time on the sorption of these metal ions were studied.展开更多
文摘Tje adsorption bchavior and mechanism of a novel chelate resin,macroporous phosphonic acid resin（PAR）for Ni（Ⅱ）were imestigated.The stotically saturated adsorption capacity is 64.3mg·g^-1 resin at 298K in HAc-NaAc medium.The Ni（Ⅱ）adsorbed on PAR can be eluted by 0.5mal·L^-1 HCl and the elution percentage reaches 96.6%.The resin can be regenerated and reused without abvious decrease in adsorption capacity.The apparent adsorption rate constant is k298=2.6×10^-5s^-1.The adsorption behavior of PAR for Ni（Ⅱ）obeys the Freundllich isotherm.The thermodynamie adsorption parameters.enthalpy change △H,free energy change △G and entropy change △S of PAR for Ni（Ⅱ）are 3.36kJ·mol^-1,-5.47kJ·mol^-1 and 29.6J·mol^-1·K^-1,respectively.The apparent activation energy is Ea=12.2kJ·mol^-1,The molar coordination ratio of the functional group of PAR to Ni（Ⅱ）is about 4：1.The adsorption mechanism of PAR for Ni（Ⅱ）was examined by a chemical method and IR spectrometry.
基金Project supported by the Scientific Research Foundation for theReturned Overseas Chinese Scholars, State Education Ministry andZhejiang Provincial National Science Foundation of China
文摘A new configuration integrated ion exchange effect with both electro-migration and electrochemical reaction in a single cell was developed to effectively retrieve metal ions from simulated wastewater using ion exchange resins without additive chemicals. By simply assembling cation exchange resins and anion exchange resins separated by homogeneous membranes, we found that the system will always be acidic in the concentrate compartment so that ion exchange resins could be in-situ regenerated without hydroxide precipitation. Such a realizable design will be really suitable for wastewater purification.
基金financial supports from the National Natural Science Foundation of China(51174152)National Basic Research Program of China(973 Program)(2012CB722702)
文摘Ni-doped phenol resin was prepared with 1∶100 mass ratio of Ni（ NO_3）_2·6H_2O to thermosetting phenol resin to optimize the structure and properties of pyrolytic carbon derived from phenol resin and increase its carbon yield. The specimens were cured at 200 ℃ and carbonized under different atmospheres（ carbon-embedded atmosphere and Ar atmosphere） and at different temperatures（ 600,800,1000 and 1200 ℃） for3 h,respectively. The carbon yield was measured. Thermal decomposition characteristics of Ni-doped phenol resin,and the oxidation resistance,phase composition and microstructure of pyrolytic carbon were characterized by differential scanning calorimetry,X-ray diffraction,energy dispersive spectroscopy, scanning electron microscopy and transmission electron microscopy. The results show that the carbon yield of Ni-doped phenol resin carbonized at800 or 1 000 ℃ is increased significantly,compared with that without any dopants. The graphitization degree of pyrolytic carbon structure derived from Ni-doped phenol resin increases with the increase of carbonization temperature. The massive multi-wall carbon nanotubes of 50-100 nm in diameter and of micrometre scale in length are generated at 1000 ℃. Compared with the carbonembedded atmosphere,carbon nanotubes can be more easily generated in Ar atmosphere,resulting in higher carbon yield and degree of crystallinity of the pyrolyticcarbon derived from Ni-doped phenol resin. The oxidation resistance of the pyrolytic carbon derived from Ni-doped phenol resin at 1200 ℃ is improved significantly and its highest oxidation temperature is increased by about 84℃,compared with that from Ni free phenol resin.
文摘Poly(acrylamide-acrylic acid-dimethyl amino ethylmethacrylate), p(AM-AA-DMAEM) and Poly(acrylamide-acrylic acid)-ethylene diamine tetracetic acid disodium, p(AM-AA)-EDTANa2 were prepared by gamma radiation-induced template polymerization technique. The prepared polymeric materials were used for the sorption of Ga(III), Cu(II), Ni(II) and Zn(II) in aqueous solution. The effect of pH, weight of resins, metal ion concentrations and contact time on the sorption of these metal ions were studied.
