Due to the characteristics of reservoir formation,the producing level of low permeability reservoir is relatively very low.It is hard to obtain high recovery through conventional development schemes.Considering the ti...Due to the characteristics of reservoir formation,the producing level of low permeability reservoir is relatively very low.It is hard to obtain high recovery through conventional development schemes.Considering the tight matrix,complex fracture system,low production level of producers,and low recovery factor ofMblock in Xinjiang oilfield,it is selected for on-site pilot test of nitrogen foam flooding.Detailed flooding scheme is made and the test results are evaluated respectively both for producers and injectors.The pressure index,filling degree,and fluid injection profile are found to be all improved in injectors after injection of nitrogen foam.The oil production,water cut and liquid production file are also improved in most of the producers,with the natural decline rate in the test area become slow.Results show that nitrogen foam flooding technology can be good technical storage for enhanced oil recovery in low permeability reservoir.展开更多
Hierarchically porous carbon materials are promising for energy storage,separation and catalysis.It is desirable but fairly challenging to simultaneously create ultrahigh surface areas,large pore volumes and high N co...Hierarchically porous carbon materials are promising for energy storage,separation and catalysis.It is desirable but fairly challenging to simultaneously create ultrahigh surface areas,large pore volumes and high N contents in these materials.Herein,we demonstrate a facile acid-base enabled in situ molecular foaming and activation strategy for the synthesis of hierarchically macro-/meso-/microporous N-doped carbon foams(HPNCFs).The key design for the synthesis is the selection of histidine(His)and potassium bicarbonate(PBC)to allow the formation of 3D foam structures by in situ foaming,the PBC/His acid-base reaction to enable a molecular mixing and subsequent a uniform chemical activation,and the stable imidazole moiety in His to sustain high N contents after carbonization.The formation mechanism of the HPNCFs is studied in detail.The prepared HPNCFs possess 3D macroporous frameworks with thin well-graphitized carbon walls,ultrahigh surface areas(up to 3200 m^2 g^-1),large pore volumes(up to 2.0 cm^3 g^-1),high micropore volumes(up to 0.67 cm^3 g^-1),narrowly distributed micropores and mesopores and high N contents(up to 14.6 wt%)with pyrrolic N as the predominant N site.The HPNCFs are promising for supercapacitors with high specific capacitances(185-240 F g^-1),good rate capability and excellent stability.They are also excellent for CO2 capture with a high adsorption capacity(~4.13 mmol g^-1),a large isosteric heat of adsorption(26.5 kJ mol^-1)and an excellent CO2/N2 selectivity(~24).展开更多
基金supported by the Prospective and Fundamental Project of CNPC“Study on the EOR Technology by Foam Flooding(2021DJ1603)”by Open Fund of State Key Laboratory of Enhanced Oil Recovery,CNPC(2022-KFKT-29).
文摘Due to the characteristics of reservoir formation,the producing level of low permeability reservoir is relatively very low.It is hard to obtain high recovery through conventional development schemes.Considering the tight matrix,complex fracture system,low production level of producers,and low recovery factor ofMblock in Xinjiang oilfield,it is selected for on-site pilot test of nitrogen foam flooding.Detailed flooding scheme is made and the test results are evaluated respectively both for producers and injectors.The pressure index,filling degree,and fluid injection profile are found to be all improved in injectors after injection of nitrogen foam.The oil production,water cut and liquid production file are also improved in most of the producers,with the natural decline rate in the test area become slow.Results show that nitrogen foam flooding technology can be good technical storage for enhanced oil recovery in low permeability reservoir.
基金the National Natural Science Foundation of China(Nos.21875153,21501125)the Natural Science Foundation of Jiangsu Province(BK20150312)the Jiangsu Shuangchuang Team Program is appreciated.
文摘Hierarchically porous carbon materials are promising for energy storage,separation and catalysis.It is desirable but fairly challenging to simultaneously create ultrahigh surface areas,large pore volumes and high N contents in these materials.Herein,we demonstrate a facile acid-base enabled in situ molecular foaming and activation strategy for the synthesis of hierarchically macro-/meso-/microporous N-doped carbon foams(HPNCFs).The key design for the synthesis is the selection of histidine(His)and potassium bicarbonate(PBC)to allow the formation of 3D foam structures by in situ foaming,the PBC/His acid-base reaction to enable a molecular mixing and subsequent a uniform chemical activation,and the stable imidazole moiety in His to sustain high N contents after carbonization.The formation mechanism of the HPNCFs is studied in detail.The prepared HPNCFs possess 3D macroporous frameworks with thin well-graphitized carbon walls,ultrahigh surface areas(up to 3200 m^2 g^-1),large pore volumes(up to 2.0 cm^3 g^-1),high micropore volumes(up to 0.67 cm^3 g^-1),narrowly distributed micropores and mesopores and high N contents(up to 14.6 wt%)with pyrrolic N as the predominant N site.The HPNCFs are promising for supercapacitors with high specific capacitances(185-240 F g^-1),good rate capability and excellent stability.They are also excellent for CO2 capture with a high adsorption capacity(~4.13 mmol g^-1),a large isosteric heat of adsorption(26.5 kJ mol^-1)and an excellent CO2/N2 selectivity(~24).
