Fin Field Effect Transistor with Active 4-Bit Arithmetic Operations in 22 nm Technology

A design of a high-speed multi-core processor with compact size is a trending approach in the Integrated Circuits(ICs)fabrication industries.Because whenever device size comes down into narrow,designers facing many power den-sity issues should be reduced by scaling threshold voltage and supply voltage.Initially,Complementary Metal Oxide Semiconductor(CMOS)technology sup-ports power saving up to 32 nm gate length,but further scaling causes short severe channel effects such as threshold voltage swing,mobility degradation,and more leakage power(less than 32)at gate length.Hence,it directly affects the arithmetic logic unit(ALU),which suffers a significant power density of the scaled multi-core architecture.Therefore,it losses reliability features to get overheating and increased temperature.This paper presents a novel power mini-mization technique for active 4-bit ALU operations using Fin Field Effect Tran-sistor(FinFET)at 22 nm technology.Based on this,a diode is directly connected to the load transistor,and it is active only at the saturation region as a function.Thereby,the access transistor can cutoff of the leakage current,and sleep transis-tors control theflow of leakage current corresponding to each instant ALU opera-tion.The combination of transistors(access and sleep)reduces the leakage current from micro to nano-ampere.Further,the power minimization is achieved by con-necting the number of transistors(6T and 10T)of the FinFET structure to ALU with 22 nm technology.For simulation concerns,a Tanner(T-Spice)with 22 nm technology implements the proposed design,which reduces threshold vol-tage swing,supply power,leakage current,gate length delay,etc.As a result,it is quite suitable for the ALU architecture of a high-speed multi-core processor.

Investigation of the characteristics of GIDL current in 90nm CMOS technology

A specially designed experiment is performed for investigating gate-induced drain leakage （GIDL） current in 90nm CMOS technology using lightly-doped drain （LDD） NMOSFET. This paper shows that the drain bias VD has a strong effect on GIDL current as compared with the gate bias VG at the same drain-gate voltage VDG. It is found that the difference between ID in the off-state ID - VG characteristics and the corresponding one in the off-state ID - VD characteristics, which is defined as IDIFF, versus VDG shows a peak. The difference between the influences of VD and VG on GIDL current is shown quantitatively by IDIFF, especially in 90nm scale. The difference is due to different hole tunnellings, Furthermore, the maximum IDIFF（IDIFF,MAX） varies linearly with VDG in logarithmic coordiuates and also VDG at IDIFF,MAX with VF which is the characteristic voltage of IDIFF, The relations are studied and some related expressions are given.

Challenges of 22 nm and beyond CMOS technology

It is predicted that CMOS technology will probably enter into 22 nm node around 2012. Scaling of CMOS logic technology from 32 to 22 nm node meets more critical issues and needs some significant changes of the technology, as well as integration of the advanced processes. This paper will review the key processing technologies which can be potentially integrated into 22 nm and beyond technology nodes, including double patterning technology with high NA water immersion lithography and EUV lithography, new device architectures, high K/metal gate （HK/MG） stack and integration technology, mobility enhancement technologies, source/drain engineering and advanced copper interconnect technology with ultra-low-k process.

Accurate and fast table look-up models for leakage current analysis in 65nm CMOS technology

Novel physical models for leakage current analysis in 65 nm technology are proposed. Taking into consideration the process variations and emerging effects in nano-scaled technology, the presented models are capable of accurately estimating the subthreshold leakage current and junction tunneling leakage current in 65 nm technology. Based on the physical models, new table look-up models are developed and first applied to leakage current analysis in pursuit of higher simulation speed. Simulation results show that the novel physical models are in excellent agreement with the data measured from the foundry in the 65 nm process, and the proposed table look-up models can provide great computational efficiency by using suitable interpolation techniques. Compared with the traditional physical-based models, the table look-up models can achieve 2.5X speedup on average on a variety of industry circuits.

Performanceanalysisofalowpowerlownoisetunablebandpassfilterformultiband RF front end

This paper presents a low power tunable active inductor and RF band pass filter suitable for multiband RF front end circuits. The active inductor circuit uses the PMOS cascode structure as the negative transconductor of a gyrator to reduce the noise voltage. Also, this structure provides possible negative resistance to reduce the inductor loss with wide inductive bandwidth and high resonance frequency. The RF band pass filter is realized using the proposed active inductor with suitable input and output buffer stages. The tuning of the center frequency for multiband operation is achieved through the controllable current source. The designed active inductor and RF band pass filter are simulated in 180 nm and 45 nm CMOS process using the Synopsys HSPICE simulation tool and their performances are compared. The parameters, such as resonance frequency, tuning capability, noise and power dissipation, are analyzed for these CMOS technologies and discussed. The design of a third order band pass filter using an active inductor is also presented.