No-bake resin-bonded sand is commonly used in casting production.However,its air pollution is relatively serious,especially in the molding and pouring process.For this reason,it is necessary to study the gas evolution...No-bake resin-bonded sand is commonly used in casting production.However,its air pollution is relatively serious,especially in the molding and pouring process.For this reason,it is necessary to study the gas evolution characteristics of no-bake resin-bonded sand from room temperature to high temperatures,and not only the amount of gaseous products,but also the composition of the gaseous products.No-bake furan resin-bonded sand(#1),phenolic urethane no-bake resin-bonded sand(#2),and alkaline phenolic no-bake resin-bonded sand(#3)are the three most common no-bake resin-bonded sands in casting.The gas evolution volume and rate of these three no-bake resin-bonded sands were studied.Thermogravimetry-mass spectrometer(TG-MS),headspace-gas chromatography/mass spectrometer(HS-GC/MS),and pyrolysis-gas chromatography/mass spectrometer(PY-GC/MS)were used to measure the composition of the gaseous products emitted from binders at room temperature and high temperatures.The differences between formaldehyde,heterocyclic aromatic compounds(HAC),monocyclic aromatic hydrocarbons(MAH),and polycyclic aromatic hydrocarbons(PAHs)gaseous products from the three types of no-bake resin-bonded sands during the molding and casting process were compared.From the perspective of environmental protection,alkaline phenolic no-bake resin-bonded sand and no-bake furan resin-bonded sand are better than phenolic urethane no-bake resin-bonded sand.展开更多
The curing mechanism of furfuryl alcohol and urea-formaldehyde furan resins was investigated using infrared spectroscopy(IR) technique.The curing productions of urea-formaldehyde furan resins modified with different a...The curing mechanism of furfuryl alcohol and urea-formaldehyde furan resins was investigated using infrared spectroscopy(IR) technique.The curing productions of urea-formaldehyde furan resins modified with different agents(i.e.sorbitol,polyester polyol,phenol and acetone) and the productions of incomplete curing were characterized by differential thermal analysis(DTA) and thermal gravity analysis(TG).The results indicate that except for polyester polyol,the other modifiers have little effect on the thermal strength of urea-formaldehyde furan resin.Furthermore,the thermal strength can be improved at a temperature of higher than 550℃.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant Nos. U1808216, 51905188)the National Key R&D Program of China (Grant No. 2020YFB1710100)
文摘No-bake resin-bonded sand is commonly used in casting production.However,its air pollution is relatively serious,especially in the molding and pouring process.For this reason,it is necessary to study the gas evolution characteristics of no-bake resin-bonded sand from room temperature to high temperatures,and not only the amount of gaseous products,but also the composition of the gaseous products.No-bake furan resin-bonded sand(#1),phenolic urethane no-bake resin-bonded sand(#2),and alkaline phenolic no-bake resin-bonded sand(#3)are the three most common no-bake resin-bonded sands in casting.The gas evolution volume and rate of these three no-bake resin-bonded sands were studied.Thermogravimetry-mass spectrometer(TG-MS),headspace-gas chromatography/mass spectrometer(HS-GC/MS),and pyrolysis-gas chromatography/mass spectrometer(PY-GC/MS)were used to measure the composition of the gaseous products emitted from binders at room temperature and high temperatures.The differences between formaldehyde,heterocyclic aromatic compounds(HAC),monocyclic aromatic hydrocarbons(MAH),and polycyclic aromatic hydrocarbons(PAHs)gaseous products from the three types of no-bake resin-bonded sands during the molding and casting process were compared.From the perspective of environmental protection,alkaline phenolic no-bake resin-bonded sand and no-bake furan resin-bonded sand are better than phenolic urethane no-bake resin-bonded sand.
文摘The curing mechanism of furfuryl alcohol and urea-formaldehyde furan resins was investigated using infrared spectroscopy(IR) technique.The curing productions of urea-formaldehyde furan resins modified with different agents(i.e.sorbitol,polyester polyol,phenol and acetone) and the productions of incomplete curing were characterized by differential thermal analysis(DTA) and thermal gravity analysis(TG).The results indicate that except for polyester polyol,the other modifiers have little effect on the thermal strength of urea-formaldehyde furan resin.Furthermore,the thermal strength can be improved at a temperature of higher than 550℃.
