Ultrasonic detection of interface in multilayers: Theory and adaptive noise canceling

The analytic expression of the received echo in multilayers NDT (Non-Destruction Evaluation) is derived. Then based on the analytic solution, interface signals are analyzed; and it is concluded that the received ultrasonic echo of mulilayers is composed of all the interface signals. By using the adaptive canceling of the signals from interfaces 0 and 1, the signals from interface 2 can be extracted. The method is applied to simulated and real echoes of multilayers,and the signals from interface 2 is separated successfully Based on the amplitude and arrival time of the signal from interface 2, the bond quality and depth of the interface can be evaluated

Fast Affine Projection Algorithm for Adaptive Noise Canceling and Its Application on the Fetal Electrocardiogram Extraction

Aimed at the problem of adaptive noise canceling(ANC),three implementary algorithms which are least mean square(LMS) algorithm,recursive least square(RLS) algorithm and fast affine projection(FAP) algorithm,have been researched.The simulations were made for the performance of these algorithms.The extraction of fetal electrocardiogram(FECG) is applied to compare the application effect of the above algorithms.The proposed FAP algorithm has obvious advantages in computational complexity,convergence speed and steadystate error.

Advanced surface coil layout with intrinsic noise cancellation properties for surface-NMR applications

A recent study demonstrated that in small-scale prepolarized surface nuclear magnetic resonance(SNMR-PP)measurements with a footprint of a few square meters,customized PP switch-off ramps can serve as an efficient excitation mechanism,eliminating the requirement for a conventional oscillating excitation pulse.This approach enables the detection of short relaxation signals from the unsaturated soil zone and can,therefore,be used to directly provide soil moisture and pore geometry information.Because ultimately such small-scale SNMR-PP setups are intended for a mobile application,it is necessary to develop strategies that allow for speedy measurement progress and do not require noise cancellation protocols based on reference stations.Hence,we developed a new concentric figure-of-eight(cFOE)loop layout that combines the direction independence of a circular loop with the intrinsic noise cancellation properties of a classical FOE-loop.This approach significantly decreases the measurement time because suitable signal-to-noise ratios are reached much faster compared to a classical circular loop and will bring us one step further toward fast and non-invasive soil moisture mapping applications.

Frequency-Domain Wideband Acoustic Noise Cancellation System

When building an adaptive noise cancellation system for wideband acoustic signals, one can meet some difficulties in practical implementation of such a system. The major problem is related to the necessity of using real-time signal generation and processing. In this paper the active noise control system which utilizes adaptation in frequency domain is considered. It is shown that the proposed algorithms simplify practical implementation of a noise cancellation system. The results of computer simulations and prototype experiments show the effectiveness of the proposed methods. .

Practical Considerations for Implementing Adaptive Acoustic Noise Cancellation in Commercial Earbuds

Active noise cancellation has become a prominent feature in contemporary in-ear personal audio devices.However,due to constraints related to component arrangement,power consumption,and manufacturing costs,most commercial products utilize fixed-type controller systems as the basis for their active noise control algorithms.These systems offer robust performance and a straightforward structure,which is achievable with cost-effective digital signal processors.Nonetheless,a major drawback of fixed-type controllers is their inability to adapt to changes in acoustic transfer paths,such as variations in earpiece fitting conditions.Therefore,adaptive-type active noise control systems that employ adaptive digital filters are considered as the alternative.To address the increasing system complexity,design concepts and implementation strategies are discussed with respect to actual hardware limitations.To illustrate these considerations,a case study showcasing the implementation of a filtered-x least mean square-based active noise control algorithm is presented.A commercial evaluation board accommodating a low-cost,fixed-point digital signal processor is used to simplify operation and provide programming access.The earbuds are obtained from a commercial product designed for noise cancellation.This study underscores the importance of addressing hardware constraints when implementing adaptive active noise cancellation,providing valuable insights for real-world applications.

Coherent optical frequency transfer via 972-km fiber link

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for.Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme,the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site.This passive scheme exhibits fine robustness and reliability,making it suitable for long-distance and noisy fiber links.An optical regeneration station is used in the link for signal amplification and cascaded transmission.The phase noise cancellation and transfer instability of the 972-km link is investigated,and transfer instability of 1.1×10^(-19)at 10^(4)s is achieved.This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

Ordered successive noise projection cancellation algorithm for dual lattice-reduction-aided MIMO detection

A novel nonlinear multi-input multi-output MIMO detection algorithm is proposed which is referred to as an ordered successive noise projection cancellation OSNPC algorithm. It is capable of improving the computation performance of the MIMO detector with the conventional ordered successive interference cancellation OSIC algorithm. In contrast to the OSIC in which the known interferences in the input signal vector are successively cancelled the OSNPC successively cancels the known noise projections from the decision statistic vector. Analysis indicates that the OSNPC is equivalent to the OSIC in error performance but it has significantly less complexity in computation.Furthermore when the OSNPC is applied to the MIMO detection with the preprocessing of dual lattice reduction DLR the computational complexity of the proposed OSNPC-based DLR-aided detector is further reduced due to the avoidance of the inverse of the reduced basis of the dual lattice in computation compared to that of the OSIC-based one. Simulation results validate the theoretical conclusions with regard to both the performance and complexity of the proposed MIMO detection scheme.

Lung sounds auscultation technology based on ANC - ICA algorithm in high bat- tlefield noise environment

AIM:To explore the more accurate lung sounds auscultation technology in high battlefield noise environment.METHODS: In this study, we restrain high background noise using a new method-adaptive noise canceling based on independent component analysis (ANC-ICA), the method, by incorporating both second-order and higher-order statistics can remove noise components of the primary input signal based on statistical independence.RESULTS:The algorithm retained the local feature of lung sounds while eliminating high background noise, and performed more effectively than the conventional LMS algorithm.CONCLUSION:This method can cancel high battlefield noise of lung sounds effectively thus can help diagnose lung disease more accurately.

Time-shared channel identification for adaptive noise cancellation in breath sound extraction

Noise artifacts are one of the key obstacles in applying continuous monitoring and computer-assisted analysis of lung sounds. Traditional adaptive noise cancellation (ANC) methodologies work reasonably well when signal and noise are stationary and independent. Clinical lung sound auscultation encounters an acoustic environment in which breath sounds are not stationary and often correlate with noise. Consequendy, capability of ANC becomes significantly compromised. This paper introduces a new methodology for extracting authentic lung sounds from noise-corrupted measurements. Unlike traditional noise cancellation methods that rely on either frequency band separation or signal/noise independence to achieve noise reduction, this methodology combines the traditional noise canceling methods with the unique feature of time-split stages in breathing sounds. By employing a multi-sensor system, the method first employs a high-pass filter to eliminate the off-band noise, and then performs time-shared blind identification and noise cancellation with recursion from breathing cycle to cycle. Since no frequency separation or signal/noise independence is required, this method potentially has a robust and reliable capability of noise reduction, complementing the traditional methods.

Multi-channel differencing adaptive noise cancellation with multi-kernel method

Although a various of existing techniques are able to improve the performance of detection of the weak interesting sig- nal, how to adaptively and efficiently attenuate the intricate noises especially in the case of no available reference noise signal is still the bottleneck to be overcome. According to the characteristics of sonar arrays, a multi-channel differencing method is presented to provide the prerequisite reference noise. However, the ingre- dient of obtained reference noise is too complicated to be used to effectively reduce the interference noise only using the clas- sical linear cancellation methods. Hence, a novel adaptive noise cancellation method based on the multi-kernel normalized least- mean-square algorithm consisting of weighted linear and Gaussian kernel functions is proposed, which allows to simultaneously con- sider the cancellation of linear and nonlinear components in the reference noise. The simulation results demonstrate that the out- put signal-to-noise ratio （SNR） of the novel multi-kernel adaptive filtering method outperforms the conventional linear normalized least-mean-square method and the mono-kernel normalized least- mean-square method using the realistic noise data measured in the lake experiment.

A High Gain, Noise Cancelling 2515-4900 MHz CMOS LNA for China Mobile 5G Communication Application

With the development of the times,people’s requirements for communication technology are becoming higher and higher.4G communication technology has been unable to meet development needs,and 5G communication technology has emerged as the times require.This article proposes the design of a low-noise amplifier(LNA)that will be used in the 5G band of China Mobile Communications.A low noise amplifier for mobile 5G communication is designed based on Taiwan Semiconductor Manufacturing Company(TSMC)0.13μm Radio Frequency(RF)Complementary Metal Oxide Semiconductor(CMOS)process.The LNA employs self-cascode devices in current-reuse configuration to enable lower supply voltage operation without compromising the gain.This design uses an active feedback amplifier to achieve input impedance matching,avoiding the introduction of resistive negative feedback to reduce gain.A common source(CS)amplifier is used as the input of the low noise amplifier.In order to achieve the low power consumption of LNA,current reuse technology is used to reduce power consumption.Noise cancellation techniques are used to eliminate noise.The simulation results in a maximum power gain of 22.783,the reverse isolation(S12)less than-48.092 dB,noise figure(NF)less than 1.878 dB,minimum noise figure(NFmin)=1.203 dB,input return loss(S11)and output return loss(S22)are both less than-14.933 dB in the frequency range of 2515-4900 MHz.The proposed Ultra-wideband(UWB)LNA consumed 1.424 mW without buffer from a 1.2 V power supply.

Nonparametric VSS-APA based on precise background noise power estimate

The adaptive algorithm used for echo cancellation(EC) system needs to provide 1) low misadjustment and 2) high convergence rate. The affine projection algorithm(APA) is a better alternative than normalized least mean square(NLMS) algorithm in EC applications where the input signal is highly correlated. Since the APA with a constant step-size has to make compromise between the performance criteria 1) and 2), a variable step-size APA(VSS-APA) provides a more reliable solution. A nonparametric VSS-APA(NPVSS-APA) is proposed by recovering the background noise within the error signal instead of cancelling the a posteriori errors. The most problematic term of its variable step-size formula is the value of background noise power(BNP). The power difference between the desired signal and output signal, which equals the power of error signal statistically, has been considered the BNP estimate in a rough manner. Considering that the error signal consists of background noise and misalignment noise, a precise BNP estimate is achieved by multiplying the rough estimate with a corrective factor. After the analysis on the power ratio of misalignment noise to background noise of APA, the corrective factor is formulated depending on the projection order and the latest value of variable step-size. The new algorithm which does not require any a priori knowledge of EC environment has the advantage of easier controllability in practical application. The simulation results in the EC context indicate the accuracy of the proposed BNP estimate and the more effective behavior of the proposed algorithm compared with other versions of APA class.

Least mean square error difference minimum criterion for adaptive chaotic noise canceller

The least mean square error difference （LMS-ED） minimum criterion for an adaptive chaotic noise canceller is proposed in this paper. Different from traditional least mean square error minimum criterion in which the error is uncorrelated with the input vector, the proposed LMS-ED minimum criterion tries to minimize the correlation between the error difference and input vector difference. The novel adaptive LMS-ED algorithm is then derived to update the weights of adaptive noise canceller. A comparison between cancelling performances of adaptive least mean square （LMS）, normalized LMS （NLMS） and proposed LMS-ED algorithms is simulated by using three kinds of chaotic noises. The simulation results clearly show that the proposed algorithm outperforms the LMS and NLMS algorithms in achieving small values of steady-state excess mean square error. Moreover, the computational complexity of the proposed LMS-ED algorithm is the same as that of the standard LMS algorithms.

Inductorless Ultra-Wide Band Front-End Chip Design with Noise Cancellation Technology for Wireless Communication Applications 10

An inductorless Ultra-Wide Band （UWB） receiver frontend chip design used in wireless communications for the frequency band of 3.1 - 4.8 GHz is presented. This ho-nodyne receiver mainly consists of a diffexential Low Noise Amplifier （LNA） circuit followed by a down-converting mixer. The proposed LNA circuit with a noise canceling resistor is connected to the CMOS device＇s body to reduce the substrate thermal noise. Simulation and measuremnt results show that the chip can reduce the froat-end Noise Figure （NF） about 0.5dB and achieve the Conversion Gain （03） of 19.44-21.57 dB and double-sideband NF less than 7.8 dB. Also, the input third-order interoept point （IIP3） is - 11 dBm, and the input second-order intercept point （IIP2） is 49 dBm. Fabricated in TSMC 0.18 tan technology, this chip occupies only 0. 167 Iron2 and dissipates power 59.2 roW.

Hardware implementation of adaptive filter for noise cancellation using TMS320C6713

Daily, we experience the effects of audio noise, which contaminates the original information bearing signal with noise from its surrounding environment. This paper focuses on real-time hardware implementation of multi-tap adaptive noise cancellation （ANC） system by using the least mean square （LMS） algorithm on TMS320C6713 to remove undesired noise from a received signal for various audio related applications. Three different experiments are carried out by considering different audio inputs to test the efficiency of the designed ANC system. The ＇C＇ code implementation of LMS algorithm is introduced and simulated in code composer studio （CCS）, then realized on the digital signal processor （DSP） C6713. The 300 Hz, 500 Hz, 800 Hz, 1 kHz and 3 kHz of tone signals and male speech signal are used as the reference inputs to trace the noise of signal until it is eliminated. The performance of ANC system is studied in terms of convergence speed, order of the filter and signal-to-noise ratio （SNR）. The experimentam results demonstrate that the designed system shows a consider- able improvement in SNR.

Design of Background Noise Suppression Circuit for Mobile Phones

With the purpose of reducing the influence of background noise on the call quality of mobile phones, background noise suppression circuit is designed based on the principle of self-adaptive noise cancellation. Because this method is not involved in the nature of the noise itself, it can be used both for stationary noise cancellation and quasi-stationary noise cancellation. The working principle and circuit design of the system are introduced in detail. Simulated experiment was conducted in the lab, and its experimental results were analyzed. The experimental results show that the circuit works well with low cost, and has a broad prospect of application and popularization.

Automatic Stabilization of an Adaptive Feedback Control for Noise Cancelling In-ear Headphones

Headphones with an integrated active noise cancellation system have been increasingly introduced to the consumer market in recent years. When exposing the human ear to active noise sources in this striking distance, the ensuring of a safe sound pressure level is vital. In feedback systems, this is coupled with the stability of the closed control loop; stable controller design is thus essential. However, changes in the control path during run-time can cause the stable control system to become unstable, resulting in an overdrive of the speakers in the headphones. This paper proposes a method, which enables the real-time analysis of the current system state and if necessary stabilizes the closed loop while maintaining the active noise reduction. This is achieved by estimating and evaluating the open loop behavior with an adaptive filter and subsequently limiting the controller gain in respect to the stability margin.

A single-ended wideband reconfigurable receiver front-end for multi-mode multi-standard applications in 0.18μm CMOS

This paper presents a reconfigurable RF front-end for multi-mode multi-standard(MMMS) applications. The designed RF front-end is fabricated in 0.18 μm RF CMOS technology. The low noise characteristic is achieved by the noise canceling technique while the bandwidth is enhanced by gate inductive peaking technique. Measurement results show that, while the input frequency ranges from 100 MHz to 2.9 GHz, the proposed reconfigurable RF front-end achieves a controllable voltage conversion gain(VCG) from 18 dB to 39 dB. The measured maximum input third intercept point(IIP3) is-4.9 dBm and the minimum noise figure(NF) is 4.6 dB. The consumed current ranges from 16 mA to 26.5 mA from a 1.8 V supply voltage. The chip occupies an area of 1.17 mm^2 including pads.

Error suppression techniques for energy-efficient high-resolution SAR ADCs

The successive approximation register(SAR)is one of the most energy-efficient analog-to-digital converter(ADC)architecture for medium-resolution applications.However,its high energy efficiency quickly diminishes when the target resolution increases.This is because a SAR ADC suffers from several major error source,including the sampling kT/C noise,the comparator noise,and the DAC mismatch.These errors are increasing hard to address in high-resolution SAR ADCs.This paper reviews recent advances on error suppression techniques for SAR ADCs,including the sampling kT/C noise reduction,the noise-shaping(NS)SAR,and the mismatch error shaping(MES).These techniques aim to boost the resolution of SAR ADCs while maintaining their superior energy efficiency.

An Efficient Reference Free Adaptive Learning Process for Speech Enhancement Applications

In issues like hearing impairment,speech therapy and hearing aids play a major role in reducing the impairment.Removal of noise signals from speech signals is a key task in hearing aids as well as in speech therapy.During the transmission of speech signals,several noise components contaminate the actual speech components.This paper addresses a new adaptive speech enhancement(ASE)method based on a modified version of singular spectrum analysis(MSSA).The MSSA generates a reference signal for ASE and makes the ASE is free from feeding reference component.The MSSA adopts three key steps for generating the reference from the contaminated speech only.These are decomposition,grouping and reconstruction.The generated reference is taken as a reference for variable size adaptive learning algorithms.In this work two categories of adaptive learning algorithms are used.They are step variable adaptive learning(SVAL)algorithm and time variable step size adaptive learning(TVAL).Further,sign regressor function is applied to adaptive learning algorithms to reduce the computational complexity of the proposed adaptive learning algorithms.The performance measures of the proposed schemes are calculated in terms of signal to noise ratio improvement(SNRI),excess mean square error(EMSE)and misadjustment(MSD).For cockpit noise these measures are found to be 29.2850,-27.6060 and 0.0758 dB respectively during the experiments using SVAL algorithm.By considering the reduced number of multiplications the sign regressor version of SVAL based ASE method is found to better then the counter parts.