Noise Control Solutions for Diesel Generator Sets

A persistent challenge for Oman's energy infrastructure was the deafening rumble of diesel generators. The Silent Generator Project addressed this challenge, developing advanced generators that deliver power quietly and efficiently. Diesel generators have historically been notorious for being noisy and vibrational, making them unsuitable for sensitive environments. To dramatically reduce noise levels, the project utilized innovative materials and design modifications to ensure reliable and quiet electricity for various applications. In all directions, the project advanced the knowledge of noise reduction through rigorous testing and meticulous integration of insulators and mufflers. As a result, quieter, more sustainable energy production is on the way, marking a major advance in silent generator technology. Furthermore, the Silent Generator Project lays the foundation for more efficient and environmentally friendly diesel generator technologies in the future. As a result of this research, a new standard for quieter, greener energy generation is established, demonstrating the critical role noise reduction plays in energy generation. Additionally, this work also suggests future diesel generator technologies that are more efficient and environmentally friendly. As a result of this research, a new standard for quieter, greener energy generation is set, demonstrating the critical role noise reduction plays in energy generation.

Noise Control of a Two Stroke Engine Car

Aim To control the noise of two stroke engine Methods On the basis of noise identification,a new muffler and acoustic shield were designed,Results the car's pass-by noise below the national limit Conclusion through proper noise controlling measures,the pass-by noise of two stroke engines could be reduced under national permitting limit.

The Algorithms of Adaptive Active Noise Control Systems in a Duct

On the basis of the theory of adaptive active noise control(AANC) in a duct, this article discusses the algorithms of the adaptive control, compares the algorithm characteristics using LMS, RLS and LSL algorithms in the adaptive filter in the AANC system, derives the recursive formulas of LMS algorithm. and obtains the LMS algorithm in computer simulation using FIR and IIR filters in AANC system. By means of simulation, we compare the attenuation levels with various input signals in AANC system and discuss the effects of step factor, order of filters and sound delay on the algorithm's convergence rate and attenuation level.We also discuss the attenuation levels with sound feedback using are and IIR filters in AANC system.

Feed-Forward Active Noise Control System Using Microphone Array

Feedforward active noise control(ANC)system are widely used to reduce the wide-band noise in different application.In feedforward ANC systems,when the noise source is unknown,the misplacement of the reference microphone may violate the causality constraint.We present a performance analysis of the feedforward ANC system under a noncausal condition.The ANC system performance degrades when the degree of noncausality increases.This research applies the microphone array technique to feedforward ANC systems to solve the unknown noise source problem.The generalized cross-correlation(GCC)and steering response power(SRP)methods based on microphone array are used to estimate the noise source location.Then,the ANC system selects the proper reference microphone for a noise control algorithm.The simulation and experiment results show that the SRP method can estimate the noise source direction with 84%accuracy.The proposed microphone array integrated ANC system can dramatically improve the system performance.

Stability analysis of a noise control system in a duct by using delay differential equation

The paper deals with the criteria for the closed- loop stability of a noise control system in a duct. To study the stability of the system, the model of delay differential equation is derived from the propagation of acoustic wave governed by a partial differential equation of hyperbolic type. Then, a simple feedback controller is designed, and its closed- loop stability is analyzed on the basis of the derived model of delay differential equation. The obtained criteria reveal the influence of the controller gain and the positions of a sensor and an actuator on the closed-loop stability. Finally, numerical simulations are presented to support the theoretical results.

Active Noise Control of the Heavy Truck Interior Cab

In order to control the noise of the heavy truck interior cab effectively, the active noise control methods are employed. First, an interior noise field test for the heavy truck is performed, and frequencies of interior noise of this vehicle are analyzed. According to the spectrum analysis of acquired noise signal, it is found out that the main frequencies of interior noise are less than 800Hz. Then the least squares lattice （LSL） algorithm is used as signal processing algorithm of the controller and a closed-loop control DSP system, based on TMS 320VC5416, is developed. The residual signal at driver＇s ear is used as feedback signal. Lastly, the developed ANC system is loaded into the heavy truck cab, and controlling the noise at driver＇ s ear for that truck at different driving speeds is attempted. The noise control test results indicate that the cab interior noise is reduced averagely by 0.9 dBA at different driving speeds.

Flower Pollination Heuristics for Nonlinear Active Noise Control Systems

In this paper,a novel design of the flower pollination algorithm is presented for model identification problems in nonlinear active noise control systems.The recently introduced flower pollination based heuristics is implemented to minimize the mean squared error based merit/cost function representing the scenarios of active noise control system with linear/nonlinear and primary/secondary paths based on the sinusoidal signal,random and complex random signals as noise interferences.The flower pollination heuristics based active noise controllers are formulated through exploitation of nonlinear filtering with Volterra series.The comparative study on statistical observations in terms of accuracy,convergence and complexity measures demonstrates that the proposed meta-heuristic of flower pollination algorithm is reliable,accurate,stable as well as robust for active noise control system.The accuracy of the proposed nature inspired computing of flower pollination is in good agreement with the state of the art counterpart solvers based on variants of genetic algorithms,particle swarm optimization,backtracking search optimization algorithm,fireworks optimization algorithm along with their memetic combination with local search methodologies.Moreover,the central tendency and variation based statistical indices further validate the consistency and reliability of the proposed scheme mimic the mathematical model for the process of flower pollination systems.

Weighing and Prioritizing Noise Control Methods Using the Delphi Technique and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) in an Iranian Tire Manufacturing Factory

Undoubtedly,noise has become a major hazardous issue in today’s industrial world,with a lot of people suffering from exposure to excessive noise in their work environments.This study was conducted to weigh and prioritize noise control methods in an Iranian tire manufacturing complex in Iran.The Delphi method and the Technique for Order Preference by Similarity and an Ideal Solution(TOPSIS)were utilized for this purpose.This cross-sectional,descriptive study was conducted in the baking hall of an Iranian tire manufacturing factory in 2016.To weigh and prioritize noise control methods,Analytic Hierarchy Process(AHP)and TOPSIS were applied.In total,4 criteria and 8 alternatives were examined.An AHP and TOPSIS questionnaire was then designed to prioritize noise control methods in the light of the objectives,criteria,and alternatives.Then,the collected data were fed into Expert Choise.V.11 and Excel and data analysis was carried out using TOPSIS.The results of data analysis indicated that the inconsistency rate in all the cases was smaller than 10%,hence the consistency of the responses was verified.According to the TOPSIS results and experts’opinions about the criteria,implementation and maintenance cost(with a weight of 0.481)and method effectiveness and efficiency(with a weight of 0.046)had the highest and lowest priority respectively.Based on the weights TOPSIS,the appropriate methods for controlling noise in tire manufacturing are designing and manufacturing silencer,requiring people in charge to quickly fix the leaks and change baking press washers on time.

Evaluation of Environmental Sound Pressure Level,Drawing of Noise-Isosonic Map Using Surfer V.19,and Prioritization of Engineering Noise Control Methods Using the Analytic Hierarchy Process(AHP):A Field Study in CGS Stations

Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments.Due to the high costs of exposure to excessive noise;continuous sound evaluation,propose and implement noise control plans in occupational environments is necessary.Thus,the present study aimed to review environmental sound measurements,drawing of noise maps,and prioritizing the engineering noise control methods using the Analytic Hierarchy Process(AHP).This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations(CGSs)of Kerman,Iran in 2021.The present study was done in two phases.In the first phase,six CGSs were investigated to measure and evaluate the noise.In addition,the noise map of a CGS was drawn using the Surfer software.Finally,the AHP was used in the second phase of the research to prioritize the control measures.In this phase,four criteria and ten alternatives were identified.According to first phase results,the sound pressure level(SPL)of the stations varied from 76 to 98 dBA.Besides,the majority of the studied stations had a sound level higher than 85 dBA(danger zone).The second phase of the study showed that out of the four evaluated criteria,the executability criterion had the highest impact and the cost criterion had the lowest impact on the selection of control measures with a weight of 0.587 and 0.052,respectively.Based on the results of prioritization of the alternatives,using a silenced regulator(weight of 0.223)and increasing the thickness of the tube(weight of 0.023)had the highest and lowest priorities among the alternatives,respectively.The use of engineering noise control methods such as using silenced regulators was the best way to control the noises of CGSs.Additionally;it is noteworthy that AHP is a practical method for prioritizing alternatives to achieve the most accurate decision-making.The results of AHP can be of great help to health and safety experts and managers in choosing the sound engineering control measures more precisely.

A Hybrid Nonlinear Active Noise Control Method Using Chebyshev Nonlinear Filter

Investigations into active noise control(ANC)technique have been conducted with the aim of effective control of the low-frequency noise.In practice,however,the performance of currently available ANC systems degrades due to the effects of nonlinearity in the primary and secondary paths,primary noise and louder speaker.This paper proposes a hybrid control structure of nonlinear ANC system to control the non-stationary noise produced by the rotating machinery on the nonlinear primary path.A fast version of ensemble empirical mode decomposition is used to decompose the non-stationary primary noise into intrinsic mode functions,which are expanded using the second-order Chebyshev nonlinear filter and then individually controlled.The convergence of the nonlinear ANC system is also discussed.Simulation results demonstrate that proposed method outperforms the FSLMS and VFXLMS algorithms with respect to noise reduction and convergence rate.

Research on Noise Control for Ventilators with Resonance

A study was carried out to control the noise produced by the ventilators at the Luling coalmine, which had caused serious noise pollution to the residents living around the mine for a long time. The main noise source was found to be the dynamic noise at the outlet of the diffuser. The frequency of its peak value was 250 Hz. A special brick with a resonant frequency of 250 Hz was designed to eliminate this noise. The diffusion of a lower frequency noise has been successfully controlled by the installation of a noise-eliminating tower above the diffuser outlet. The detection results show that the noise in the nearby residential area has been lowered to an average 55.3dB(A) in the daytime from 69.8dB(A) and to 48.4dB(A) at night from 65.8dB(A).

Dynamic Active Noise Control of Broadband Noise in Fighter Aircraft Pilot Helmet

This paper presents the development of a dynamic Active Noise Control(ANC)algorithm aimed towards redu-cingthe broadbandnoiseinside the helmet earcups ofafighter aircraftpilot helmet.The dynamicANC involves a Variable Step-Size Griffiths(VSSG)FxLMS algorithm to attenuate noise entering directly through helmet,a LMS based adaptive noise canceller to attenuate noise entering through the pilot microphone,and energy detectors for failure protection and optimized battery power usage.The algorithms are implemented on Texas Instruments’TMS320C6748 processor and are tested in a helmet ANC experimental setup.

Application of system identification in a practical active noise control system

Noise pollution has become increasingly severe around the world due to fast urbanization. How to soundproof windows from outside noise is of significant interest for both academia and industry. This paper reports an experimental implementation of normalized minmax active noise control (ANC) algorithm on an open window system, where identifying the model of acoustic sound paths plays a central role. By doing this, traffic noise is attenuated by the ANC system, leading to a relatively quiet indoor environment, while the natural lighting and ventilation functions of a window are remained. Our experiments show that an average of 19 dB(A) noise reduction is achieved.

Noise control for high subsonic jet flows by inner wall treatment

Subsonic jet nozzles,commonly used in passenger aircrafts,generate significant noise that travels both downstream and upstream due to large-scale or fine-scale turbulence in the jet plume.To reduce jet noise,a novel wall treatment method,termed the wavy inner wall(WIW),is proposed.With this method,the smooth inner wall near the exit of the nozzle is replaced by treated walls that carry small wavy patterns.Numerical simulations were conducted to investigate the effects of the WIW treatment.Large eddy simulations(LES)were used to predict the unsteady flow field and the far-field noise,followed by the analogy method proposed by Ffowcs Williams and Hawkings.To better understand the mechanism behind the noise reduction achieved by the WIW treatment,the shear-layer instability,radial and azimuthal auto-correlation functions,turbulent kinetic energy,and acoustic source term from the Tam-Auriault(TA)jet-noise model were analyzed.Results indicated that the WIW treatment advances the onset of jet flow instability in the shear-layer,leading to the early breakdown of jet shear-layer and production of different scales of downstream turbulent structures.As a result,the distribution and production of turbulent kinetic energy are affected,and the genera-tion and emission of jet noise are controlled.The WIW treatment enables the control of fine scale turbulence,resulting in the reduction of mid-to high-frequency noise in the far field,while ensuring a low thrust loss.This feature makes the WIW method a promis-ing approach for jet noise control.

Application and optimization design of non-obstructive particle damping-phononic crystal vibration isolator in viaduct structure-borne noise reduction

The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructive particle damping-phononic crystal vibration isolator is proposed herein,which uses the particle damping vibration absorption technology and bandgap vibration control theory.The vibration reduction performance of the NOPD-PCVI was analyzed from the perspective of vibration control.The paper explores the structure-borne noise reduction performance of the NOPD-PCVIs installed on different bridge structures under varying service conditions encountered in practical engineering applications.The load transferred to the bridge is obtained from a coupled train-FST-bridge analytical model considering the different structural parameters of bridges.The vibration responses are obtained using the finite element method,while the structural noise radiation is simulated using the frequency-domain boundary element method.Using the particle swarm optimization algorithm,the parameters of the NOPD-PCVI are optimized so that its frequency bandgap matches the dominant bridge structural noise frequency range.The noise reduction performance of the NOPD-PCVIs is compared to the steel-spring isolation under different service conditions.

Noise reduction mechanism of high-speed railway box-girder bridges installed with MTMDs on top plate

The issue of low-frequency structural noise radiated from high-speed railway(HSR) box-girder bridges(BGBs) is a significant challenge worldwide. Although it is known that vibrations in BGBs caused by moving trains can be reduced by installing multiple tuned mass dampers(MTMDs) on the top plate, there is limited research on the noise reduction achieved by this method. This study aims to investigate the noise reduction mechanism of BGBs installed with MTMDs on the top plate. A sound radiation prediction model for the BGB installed with MTMDs is developed, based on the vehicle–track–bridge coupled dynamics and acoustics boundary element method. After being verified by field tested results, the prediction model is employed to study the reduction of vibration and noise of BGBs caused by the MTMDs. It is found that installing MTMDs on top plate can significantly affect the vibration distribution and sound radiation law of BGBs. However, its impact on the sound radiation caused by vibrations dominated by the global modes of BGBs is minimal. The noise reduction achieved by MTMDs is mainly through changing the acoustic radiation contributions of each plate of the bridge. In the lower frequency range, the noise reduction of BGB caused by MTMDs can be more effective if the installation of MTMDs can modify the vibration frequency and distribution of the BGB to avoid the influence of small vibrations and disperse the sound radiation from each plate.

Adaptive Active Control of Low Frequency Noise in a Duct

Aim To study a method realizing noise control for a physical model of progressive wave in a duct. Methods A mathematical model was constructed and a transfer function of the adaptive system for noise control was also worked out; moreover, the effects of some algorithms such as RLS,LMS and LSL on noise control were analyzed and compared. Results Without the feedback of sound, the mean noise reduce value(MNRV) of 27 5 dB for broadband noise from 0 to 500?Hz in frequency were achieved. When acoustic feedback took place and an air stream loudspeaker was used, the MNRV was only about 4 9?dB. But if the loudspeaker had a plain frequency feature, MNRV was improved by 10 2?dB. Conclusion The technique is applied to ruducing the noise from engines' exhausted gas pipes. It is, in principle, used for noise cancelling in a closed three dimensional space.

Subjective annoyance caused by indoor low-level and low frequency noise and control method

The influence of low_level noise has not been widely noticed. This paper discovered that low_level and low frequency noise(A_weighted equivalent level L eq <45 dB) causes higher probability of subjective annoyance. The fuzzy mathematic principle was applied to deal with the threshold level of subjective annoyance from noise in this study; there is preferable relationship between the indoor noise and noise annoyance at low frequency noise level. Study indicated at the same centered noise level, the change of annoyance probability is mainly caused by the change of the frequency spectrum characteristic of the indoor noise. Under low noise level environment, without change of the medium_low frequency noise, the slight increase of medium_high frequency noise level with the help of noise sheltering effect can significantly reduce the noise annoyance. This discovery brings a new resolution on how to improve the environmental quality of working or living places. A noise control model is given in this study according to the acoustic analysis.

Adaptive ANFIS-based filter for active control of sinusoidal primary noise in nonlinear path

Linear active noise control (ANC) system is promising in suppressing broadband and narrowband noise in a linear acoustic site.However,in some situations,the acoustic systems are nonlinear which make the primary noise being nonlinear distortion at the canceling point,and the linear ANC system maybe can not work well for these cases.This paper presents an adaptive network-based fuzzy inference system (ANFIS)-based nonlinear filter for active noise control,which is expected to be successfully applied to situations with nonlinear distortion.In the proposed adaptive control algorithm,the parameters are updated by gradient descent method.In the simulations,the secondary-path FIR model coefficients are estimated in advance by off-line system identification method,and one case for sinusoidal primary noise with nonlinear distortion is presented,which verifies the effectiveness of the proposed system in suppressing sinusoidal noise generated by rotating machines,e.g.,engines in vehicles.

Noise Pollution Reduction through a Novel Optimization Procedure in Passive Control Methods

This paper proposes a novel optimization framework in passive control techniques to reduce noise pollution.The geometries of the structures are represented by Catmull-Clark subdivision surfaces,which are able to build gap-free Computer-Aided Design models and meanwhile tackle the extraordinary points that are commonly encountered in geometricmodelling.The acoustic fields are simulated using the isogeometric boundary elementmethod,and a density-based topology optimization is conducted to optimize distribution of sound-absorbing materials adhered to structural surfaces.The approach enables one to perform acoustic optimization from Computer-Aided Design models directly without needingmeshing and volume parameterization,thereby avoiding the geometric errors and time-consuming preprocessing steps in conventional simulation and optimization methods.The effectiveness of the present method is demonstrated by three dimensional numerical examples.