Viscoelastic behavior of the non-Hooke deformation of amorphous PET film before yield was investigated in the temperature region 74-80.5 degreesC around the glass transition temperature. The film specimen was drawn to...Viscoelastic behavior of the non-Hooke deformation of amorphous PET film before yield was investigated in the temperature region 74-80.5 degreesC around the glass transition temperature. The film specimen was drawn to yield point followed by unloading to zero stress, then the residual deformation was held constant; while the subsequent evolution of the stress was recorded. An induction period was found in the course of stress evolution followed by a stress step-increase. The induction period decreases with increasing drawing temperature with an activation energy of 1.10 MJ/mol.K, which is attributed to the time needed for the relaxation of rubbery deformation through cooperative internal rotations. At temperatures lower than 74 degreesC, there is no stress increase or the induction period becomes too long to be observed. Thus the nature of anelasticity in the non-Hooke region before yielding is attributed to stress induced rubbery deformation. The experimental results are interpreted in terms of Perez' theological model of a series connected Hooks spring and a Voigt element consisting of a parallel connected elastic spring and a dashpot.展开更多
基金This work was supported by the National Key Projects for Fundamental Research-"Macromolecular Condensed State", Ministry of Science and Technology, China.
文摘Viscoelastic behavior of the non-Hooke deformation of amorphous PET film before yield was investigated in the temperature region 74-80.5 degreesC around the glass transition temperature. The film specimen was drawn to yield point followed by unloading to zero stress, then the residual deformation was held constant; while the subsequent evolution of the stress was recorded. An induction period was found in the course of stress evolution followed by a stress step-increase. The induction period decreases with increasing drawing temperature with an activation energy of 1.10 MJ/mol.K, which is attributed to the time needed for the relaxation of rubbery deformation through cooperative internal rotations. At temperatures lower than 74 degreesC, there is no stress increase or the induction period becomes too long to be observed. Thus the nature of anelasticity in the non-Hooke region before yielding is attributed to stress induced rubbery deformation. The experimental results are interpreted in terms of Perez' theological model of a series connected Hooks spring and a Voigt element consisting of a parallel connected elastic spring and a dashpot.