期刊文献+
共找到462篇文章
< 1 2 24 >
每页显示 20 50 100
Cu/TiO_(2) Photocatalysts for CO_(2) Reduction: Structure and Evolution of the Cocatalyst Active Form 被引量:2
1
作者 Andrey A.Saraev Anna Yu.Kurenkova +3 位作者 Denis D.Mishchenko Alexandr L.Trigub Evgeniy Yu.Gerasimov Ekaterina A.Kozlova 《Transactions of Tianjin University》 EI CAS 2024年第2期140-151,共12页
Extensive work on a Cu-modified TiO_(2) photocatalyst for CO_(2) reduction under visible light irradiation was conducted. The structure of the copper cocatalyst was established using UV-vis diff use refl ectance spect... Extensive work on a Cu-modified TiO_(2) photocatalyst for CO_(2) reduction under visible light irradiation was conducted. The structure of the copper cocatalyst was established using UV-vis diff use refl ectance spectroscopy, high-resolution transmis- sion electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy. It was found that copper exists in different states (Cu 0 , Cu^(+) , and Cu^(2+) ), the content of which depends on the TiO_(2) calcination temperature and copper loading. The optimum composition of the cocatalyst has a photocatalyst based on TiO_(2) calcined at 700℃ and modified with 5 wt% copper, the activity of which is 22 μmol/(h·g cat ) (409 nm). Analysis of the photocatalysts after the photocatalytic reaction disclosed that the copper metal on the surface of the calcined TiO_(2) was gradually converted into Cu_(2) O during the photocatalytic reaction. Meanwhile, the metallic copper on the surface of the noncalcined TiO_(2) did not undergo any trans- formation during the reaction. 展开更多
关键词 PHOTOCATALYSIS Photocatalytic CO_(2)conversion Visible light Titanium dioxide Copper Copper oxides Methane formation photocatalyst transformation
下载PDF
Mg-doped SrTaO_(2)N as a visible-light-driven H_(2)-evolution photocatalyst for accelerated Z-scheme overall water splitting
2
作者 Jun Xu Ying Luo +4 位作者 Qiaoqi Guo Wenzheng Sun Shanshan Chen Zheng Wang Hong He 《Chinese Journal of Catalysis》 SCIE CAS CSCD 2024年第10期70-78,共9页
Perovskite SrTaO_(2)N is one of the most promising narrow-bandgap photocatalysts for Z-scheme overall water splitting.However,the formation of defect states during thermal nitridation severely hinders the separation o... Perovskite SrTaO_(2)N is one of the most promising narrow-bandgap photocatalysts for Z-scheme overall water splitting.However,the formation of defect states during thermal nitridation severely hinders the separation of charges,resulting in poor photocatalytic activity.In the present study,we successfully synthesize SrTaO_(2)N photocatalyst with low density of defect states,uniform morphology and particle size by flux-assisted one-pot nitridation combined with Mg doping.Some important parameters,such as the size of unit cell,the content of nitrogen,and microstructure,prove the successful doping of Mg.The defect-related carrier recombination has been significantly reduced by Mg doping,which effectively promotes the charge separation.Moreover,Mg doping induces a change of the band edge,which makes proton reduction have a stronger driving force.After modifying with the core/shell-structured Pt/Cr_(2)O_(3)cocatalyst,the H_(2)evolution activity of the optimized SrTaO_(2)N:Mg is 10 times that of the undoped SrTaO_(2)N,with an impressive apparent quantum yield of 1.51%at 420 nm.By coupling with Au-FeCoO_(x)modified BiVO_(4)as an O_(2)-evolution photocatalyst and[Fe(CN)_(6)]_(3)−/[Fe(CN)_(6)]_(4)−as the redox couple,a redox-based Z-scheme overall water splitting system is successfully constructed with an apparent quantum yield of 1.36%at 420 nm.This work provides an alternative way to prepare oxynitride semiconductors with reduced defects to promote the conversion of solar energy. 展开更多
关键词 Photocatalytic overall water splitting SrTaO_(2)N photocatalyst Mg doping Defect density COCATALYST
下载PDF
Construction of direct-Z-scheme heterojunction photocatalyst of g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)composite and its degradation behavior for dyes of Rhodamine B
3
作者 Hanlin Qian Jianping Zou +4 位作者 Hongxia Liu Aishun Ma Shitong Xu Ting Li Sili Ren 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第9期222-234,共13页
Direct-Z-scheme g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)photocatalyst with giant internal electric field was prepared by onestep aqueous sonication self-assembly method using g-C_(3)N_(4)and MXene of Ti_(3)C_(2)as the source ... Direct-Z-scheme g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)photocatalyst with giant internal electric field was prepared by onestep aqueous sonication self-assembly method using g-C_(3)N_(4)and MXene of Ti_(3)C_(2)as the source materials.The chemical composition and structure of the catalysts was characterized by FT-IR,XRD,SEM,TEM,and XPS.The XPS characterization indicated that Ti_(3)C_(2)was partially oxidized to TiO_(2)during the composite process.As a result,an efficient direct-Z-scheme heterojunction structure consisting of the g-C_(3)N_(4)and TiO_(2)with Ti_(3)C_(2)as an electron bridge was constructed.The photocatalytic performance of the prepared catalysts was evaluated by degrading the Rhodamine B(RhB)wastewater.Compared with the single g-C_(3)N_(4),the g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)composite photocatalyst exhibited efficient and stable photocatalytic degradation ability,with a degradation efficiency as high as 99.2%for RhB under optimal conditions(2%Ti_(3)C_(2),pH=3).The high degradation performance of g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)for RhB was attributed to the combination of Ti_(3)C_(2),TiO_(2),and g-C_(3)N_(4)components,forming a direct-Z-scheme heterojunction with a high-speed electron transport channel structure.The role of Z-scheme heterojunctions in electron transport is verified by photoelectrochemical characterization,along with photoluminescence(PL).Our research provides a simple method to design photocatalysts by constructing direct-Z-scheme electron transport channels for highly efficient treatment of dye wastewater. 展开更多
关键词 photocatalyst Direct-Z-scheme heterojunction RhB dye wastewater g-C_(3)N_(4) MXene Ti_(3)C_(2)
下载PDF
TiO2-PES Fibrous Composite Material for Ammonia Removal Using UV-A Photocatalyst
4
作者 Anh Phuong Le Thi Masaru Ohshiro Takaomi Kobayashi 《Journal of Materials Science and Chemical Engineering》 2024年第1期1-19,共19页
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co... This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under  UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications. 展开更多
关键词 Ammonia Removal photocatalyst TiO2-PES Composite Fiber Fibrous Material
下载PDF
Synthesis of AgCl/Ti_(3)C_(2)@TiO_(2)Ternary Composite Photocatalysts for Photocatalytic Oxidation of 1,4-Dihydropyridine and Tetracycline Hydrochloride
5
作者 Wu Hanliu Quan Yan +3 位作者 Liu Meiling Tian Xuemei Ren Chunguang Wang Zhonghua 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS CSCD 2023年第2期10-23,共14页
AgCl/Ti_(3)C_(2)@TiO_(2)ternary composites were prepared to form a heterojunction structure between AgCl and TiO_(2)and introduce Ti3C2 as a cocatalyst.The as-prepared AgCl/Ti_(3)C_(2)@TiO_(2)composites showed higher ... AgCl/Ti_(3)C_(2)@TiO_(2)ternary composites were prepared to form a heterojunction structure between AgCl and TiO_(2)and introduce Ti3C2 as a cocatalyst.The as-prepared AgCl/Ti_(3)C_(2)@TiO_(2)composites showed higher photocatalytic activity than pure AgCl and Ti_(3)C_(2)@TiO_(2)for photooxidation of a 1,4-dihydropyridine derivative(1,4-DHP)and tetracycline hydrochloride(TCH)under visible light irradiation(λ>400 nm).The photocatalytic activity of AgCl/Ti_(3)C_(2)@TiO_(2)composites depended on Ti_(3)C_(2)@TiO_(2)content,and the catalytic activity of the optimized samples were 6.9 times higher than that of pure AgCl for 1,4-DHP photodehydrogenation and 7.3 times higher than that of Ti_(3)C_(2)@TiO_(2)for TCH photooxidation.The increased photocatalytic activity was due to the formation of a heterojunction structure between AgCl and TiO_(2)and the introduction of Ti3C2 as a cocatalyst,which lowered the internal resistance,sped up the charge transfer,and increased the separation efficiency of photogenerated carries.Photogenerated holes and superoxide radical anions were the major active species in the photocatalytic process. 展开更多
关键词 AgCl/Ti_(3)C_(2)@TiO_(2) composite photocatalyst COCATALYST heterojunction structure in situ solvothermal growth method
下载PDF
MoS_(2)/ZnO异质结纳米材料降解亚甲基蓝的光催化性能研究 被引量:1
6
作者 王进美 蒋守杰 +2 位作者 王春霞 王丽丽 高大伟 《西安工程大学学报》 CAS 2024年第1期24-30,共7页
为了提高ZnO的光转换效率,选用带隙较低的MoS_(2)形成异质结提高ZnO的光催化性能。通过水热法制备ZnO纳米棒,并进一步制备MoS_(2)/ZnO异质结构的纳米复合材料。通过扫描电镜(SEM)、X射线粉末衍射仪(XRD)、固体紫外可见漫反射测试仪(UV-V... 为了提高ZnO的光转换效率,选用带隙较低的MoS_(2)形成异质结提高ZnO的光催化性能。通过水热法制备ZnO纳米棒,并进一步制备MoS_(2)/ZnO异质结构的纳米复合材料。通过扫描电镜(SEM)、X射线粉末衍射仪(XRD)、固体紫外可见漫反射测试仪(UV-Vis)和紫外可见分光光度计(UV-245)等分析方法对样品的形貌、结构及光学性能等进行表征。结果表明,MoS_(2)/ZnO异质结复合材料呈棒状结构,并由于内建电场存在可有效增强光生载流子的分离效率,进而提高了可见光区的吸收,提高了光催化性能。在模拟太阳光(包含紫外波段)下,60 min时MoS_(2)-15/ZnO纳米复合材料对亚甲基蓝的降解率可达99%,比纯ZnO的降解率提高了10%。 展开更多
关键词 MoS_(2)/ZnO 光催化 异质结 亚甲基蓝 纳米复合材料
下载PDF
Z型异质结Cu_(2)O/Bi_(2)MoO_(6)的构建及光催化降解性能
7
作者 赵强 郭智楠 +5 位作者 李淑英 王俊丽 李作鹏 贾治芳 王科伟 郭永 《无机化学学报》 SCIE CAS CSCD 北大核心 2024年第5期885-894,共10页
通过水热法制备出一系列Z型异质结Cu_(2)O/Bi_(2)MoO_(6)新型光催化剂。采用扫描电子显微镜、粉末X射线衍射、红外光谱、紫外可见吸收光谱等表征手段研究了催化剂的形貌、结构性质和光电化学性质,并以四环素(TC)为降解目标污染物,进一... 通过水热法制备出一系列Z型异质结Cu_(2)O/Bi_(2)MoO_(6)新型光催化剂。采用扫描电子显微镜、粉末X射线衍射、红外光谱、紫外可见吸收光谱等表征手段研究了催化剂的形貌、结构性质和光电化学性质,并以四环素(TC)为降解目标污染物,进一步探究了其催化效率。实验结果表明,Cu_(2)O的加入提高了复合催化剂的光催化性能,其中20%Cu_(2)O/Bi_(2)MoO_(6)复合催化剂(Cu_(2)O和Bi_(2)MoO_(6)的质量比为20%)降解效果最好,100 min内可降解95%的TC。Cu_(2)O与Bi_(2)MoO_(6)之间的协同作用使其可以吸收更多的可见光,所构建的Z型异质结改变了电子转移途径,提高了电子与空穴的分离效率,光催化活性显著提高。通过自由基捕获实验和能带结构,分析了Z型异质结Cu_(2)O/Bi_(2)MoO_(6)复合催化剂光催化降解TC可能的机理。 展开更多
关键词 光催化剂 钼酸铋 氧化亚铜 Cu_(2)O/Bi_(2)MoO_(6) Z型异质结 四环素
下载PDF
水热反应温度对ZnIn_(2)S_(4)/Bi_(2)WO_(6)复合催化剂的影响研究
8
作者 王震 刘婷婷 +1 位作者 张强 王磊 《功能材料》 CAS CSCD 北大核心 2024年第7期7191-7199,共9页
为解决传统半导体光催化剂可见光响应能力弱、光生电子空穴复合快、能带结构导致载流子氧化还原能力弱等问题,采用水热法制备ZnIn_(2)S_(4)/Bi_(2)WO_(6)(ZlS@BW)复合催化剂并系统研究水热反应温度对其结构性能的影响。当水热温度从80... 为解决传统半导体光催化剂可见光响应能力弱、光生电子空穴复合快、能带结构导致载流子氧化还原能力弱等问题,采用水热法制备ZnIn_(2)S_(4)/Bi_(2)WO_(6)(ZlS@BW)复合催化剂并系统研究水热反应温度对其结构性能的影响。当水热温度从80℃升高到160℃,ZlS@BW复合光催化剂结晶度提高,形貌转变为致密核壳结构,比表面积和光电性能先降低再升高,氟伐他汀去除率逐步上升。而当温度升高到200℃时,核壳结构遭到了破坏,比表面积和光电性能变差,氟伐他汀的降解效果降低,光催化性能下降。结果表明,水热温度为160℃时,制备的ZlS@BW复合光催化剂晶型结晶程度较高,且形貌致密,比表面积最大,产生的瞬态光电流最大,阻抗半径最小,具有最优光催化性能。对污染物氟伐他汀降的降解效率最高,可达到75.47%。 展开更多
关键词 水热法 水热反应温度 ZnIn_(2)S_(4)/Bi_(2)WO_(6)复合催化剂 光催化
下载PDF
Ag_(3)PO_(4)修饰AgBr纳米线/Ti_(3)C_(2)双异质结光催化剂降解罗丹明B
9
作者 曾武军 曾斌 +2 位作者 彭巧 宁旭涛 张明 《精细化工》 EI CAS CSCD 北大核心 2024年第11期2397-2404,共8页
以十六烷基三甲基溴化铵(CTAB)为模板和溴源,通过添加Ti_(3)C_(2)MXene,使用共沉淀法制备了Ag_(3)PO_(4)修饰AgBr纳米线/Ti_(3)C_(2)双异质结光催化剂(Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)),采用SEM、TEM、XRD、XPS、紫外-可见漫反射光谱... 以十六烷基三甲基溴化铵(CTAB)为模板和溴源,通过添加Ti_(3)C_(2)MXene,使用共沉淀法制备了Ag_(3)PO_(4)修饰AgBr纳米线/Ti_(3)C_(2)双异质结光催化剂(Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)),采用SEM、TEM、XRD、XPS、紫外-可见漫反射光谱、荧光光谱对Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)进行了表征。以罗明丹B(RhB)为目标降解物,考察了质量分数1%的Ti_(3)C_(2)水分散液添加量对Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)光催化降解RhB的影响。结果表明,层状Ti_(3)C_(2)分布在AgBr纳米线周围,Ag_(3)PO_(4)纳米粒子修饰在两者之上,3种化合物之间形成Z型和肖特基双异质结;质量分数1%的Ti_(3)C_(2)分散液添加量为0.5 g制备的Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)-5具有最佳的光催化降解RhB性能,30 mg该光催化剂对30 mL质量浓度为10 mg/L RhB溶液的降解率为94.4%;超氧自由基和羟基自由基是Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)光催化降解RhB过程中起主要作用的活性物种;AgBr、Ag_(3)PO_(4)、Ti_(3)C_(2)三者之间形成的Z型和肖特基双异质结增强了光生电子-空穴对(e--h+)的分离效率,提升了Ag_(3)PO_(4)-AgBr NW/Ti_(3)C_(2)光催化性能。 展开更多
关键词 双异质结 光催化剂 Ti_(3)C_(2) 纳米线 罗丹明B 功能材料
下载PDF
稀土La掺杂TiO_(2)纳米纤维高响应光催化降解染料研究 被引量:1
10
作者 葛烨倩 徐佳琦 +3 位作者 曹琪 张霞霞 王益峰 许福军 《功能材料》 CAS CSCD 北大核心 2024年第3期3159-3164,共6页
为了提高TiO_(2)光催化性能,并研究金属离子掺杂对TiO_(2)光催化性能的影响,采用静电纺丝技术和煅烧工艺制备稀土元素La掺杂TiO_(2)无机纳米纤维膜,通过SEM、XRD、FT-IR、TG测试对材料的形貌、结构进行表征,以亚甲基蓝为靶向降解剂,进... 为了提高TiO_(2)光催化性能,并研究金属离子掺杂对TiO_(2)光催化性能的影响,采用静电纺丝技术和煅烧工艺制备稀土元素La掺杂TiO_(2)无机纳米纤维膜,通过SEM、XRD、FT-IR、TG测试对材料的形貌、结构进行表征,以亚甲基蓝为靶向降解剂,进一步深入研究La^(3+)改性TiO_(2)光催化氧化降解染料的机理。结果表明,当染料浓度为10 mg/L,La^(3+)掺杂改性纳米TiO_(2)纤维的浓度为15 mg/10 mL条件下,催化10 min的降解率为63.41%,催化70 min的降解率即可达到99.87%,比未掺杂TiO_(2)纳米纤维的降解率提高了6.36%,可见,La^(3+)的掺杂提高了TiO_(2)光催化降解速率,所需要的时间减少了。 展开更多
关键词 La^(3+)掺杂 TiO_(2) 光催化剂 染料降解
下载PDF
TiO_(2)基光催化剂的负载改性方法研究进展 被引量:1
11
作者 刘贺津 乔鹏 +1 位作者 朴锐 王雪芹 《当代化工》 CAS 2024年第4期953-956,996,共5页
TiO_(2)由于比表面积大、化学性质稳定、具有较高光催化活性等优点,在环境治理保护、光催化降解污染物等方面广泛应用。但其禁带宽度较大,只能吸收紫外光,且光生电子-空穴对再复合率较高,使其对太阳光的利用率大大降低,从而限制了其大... TiO_(2)由于比表面积大、化学性质稳定、具有较高光催化活性等优点,在环境治理保护、光催化降解污染物等方面广泛应用。但其禁带宽度较大,只能吸收紫外光,且光生电子-空穴对再复合率较高,使其对太阳光的利用率大大降低,从而限制了其大规模的工业化应用。因此,如何进一步提高TiO_(2)半导体材料的光催化效果以及对太阳光的利用率备受研究者关注。对TiO_(2)的负载改性方法如非金属元素负载、金属元素负载、半导体复合改性以及染料敏化改性等方面的研究进展进行了综述。 展开更多
关键词 TiO_(2)光催化剂 金属元素负载改性 非金属元素负载改性 半导体复合改性
下载PDF
Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface 被引量:3
12
作者 Chaitanya B.Hiragond Sohag Biswas +8 位作者 Niket SPowar Junho Lee Eunhee Gong Hwapyong Kim Hong Soo Kim Jin-Woo Jung Chang-Hee Cho Bryan M.Wong Su-Il In 《Carbon Energy》 SCIE EI CAS CSCD 2024年第1期182-196,共15页
Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar f... Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective CH4.Ru doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) adsorption.High-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction activity.The optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity. 展开更多
关键词 gas-phase CO_(2) reduction H_(2)O_(2) treatment plasmonic nanoparticles solar fuel photocatalyst surface modification
下载PDF
A review on TiO_2-based Z-scheme photocatalysts 被引量:42
13
作者 Kezhen Qi Bei Cheng Jiaguo Yu 《Chinese Journal of Catalysis》 CSCD 北大核心 2017年第12期1936-1955,共20页
TiO2‐based Z‐scheme photocatalysts have attracted considerable attention because of the low recombination rate of their photogenerated electron–hole pairs and their high photocatalytic efficiency.In this review,the... TiO2‐based Z‐scheme photocatalysts have attracted considerable attention because of the low recombination rate of their photogenerated electron–hole pairs and their high photocatalytic efficiency.In this review,the reaction mechanism of Z‐scheme photocatalysts,recent research progress in the application of TiO2‐based Z‐scheme photocatalysts,and improved methods for photocatalytic performance enhancement are explored.Their applications,including water splitting,CO2reduction,decomposition of volatile organic compounds,and degradation of organic pollutants,are also described.The main factors affecting the photocatalytic performance of TiO2‐based Z‐scheme photocatalysts,such as pH,conductive medium,cocatalyst,architecture,and mass ratio,are discussed.Concluding remarks are presented,and some suggestions for the future development of TiO2‐based Z‐scheme photocatalysts are highlighted. 展开更多
关键词 TIO2 Z‐scheme photocatalyst Water splitting CO2 reduction Pollutant degradation
下载PDF
Mo-Zn_(0.5)Cd_(0.5)S@NiCo_(2)S_(4)掺杂-异质结体系的制备及其双功能光催化性能研究 被引量:2
14
作者 牛杰 王亮 +1 位作者 孟祥超 李春虎 《聊城大学学报(自然科学版)》 2024年第1期36-45,共10页
采用溶剂热与水热法制备了Mo-Zn_(0.5)Cd_(0.5)S@NiCo_(2)S_(4)掺杂-异质结光催化剂,系统表征了光催化剂的晶体结构、元素组成、微观形貌和光电性能,通过差分电荷密度的计算并阐释了电子转移方向。结果表明,Mo的掺杂改变了Zn_(0.5)Cd_(0... 采用溶剂热与水热法制备了Mo-Zn_(0.5)Cd_(0.5)S@NiCo_(2)S_(4)掺杂-异质结光催化剂,系统表征了光催化剂的晶体结构、元素组成、微观形貌和光电性能,通过差分电荷密度的计算并阐释了电子转移方向。结果表明,Mo的掺杂改变了Zn_(0.5)Cd_(0.5)S的晶格和能带结构,异质结的构筑增加了光催化活性位点,加快了电子转移速率。在可见光照射下,通过降解四环素(TC)溶液同时产氢来考察双功能光催化剂的活性。60 min内,TC的降解率可达75%,氢气产量达1146.72μmol/g/h。 展开更多
关键词 Zn_(0.5)Cd_(0.5)S NiCo_(2)S_(4) 光催化剂 异质结 产氢 光降解
下载PDF
Recent advances on Bi_(2)WO_(6)‐based photocatalysts for environmental and energy applications 被引量:11
15
作者 Tong Chen Lizhen Liu +1 位作者 Cheng Hu Hongwei Huang 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 2021年第9期1413-1438,共26页
Bismuth tungstate(Bi_(2)WO_(6))has become a research hotspot due to its potential in photocatalytic energy conversion and environmental purification.Nevertheless,the limited light absorption and fast recombination of ... Bismuth tungstate(Bi_(2)WO_(6))has become a research hotspot due to its potential in photocatalytic energy conversion and environmental purification.Nevertheless,the limited light absorption and fast recombination of photogenerated carriers hinder the further improvement of the photocatalytic performance of Bi_(2)WO_(6).Herein,we provide a systematic review for the recent advances on Bi_(2)WO_(6)‐based photocatalysts.It starts with the crystal structure,optical properties and photocatalytic fundamentals of Bi_(2)WO_(6).Then,we focus on the modification strategies of Bi_(2)WO_(6)based on morphology control,atomic modulation and composite fabrication for diverse photocatalytic applications,such as organic synthesis,water splitting,CO2 reduction,water treatment,air purification,bacterial inactivation,etc.Finally,some current challenges and future development prospects are proposed.We expect that this review can provide a useful reference and guidance for the development of efficient Bi_(2)WO_(6)photocatalysts. 展开更多
关键词 Bi2WO6 photocatalyst Morphology control Atomic modulation Composite fabrication
下载PDF
坡缕石-In_(2)O_(3)/In_(2)S_(3)复合材料光催化降解甲基橙
16
作者 王涛 胡美凤 +2 位作者 文娜 常玥 查飞 《精细化工》 EI CAS CSCD 北大核心 2024年第8期1824-1832,共9页
以In_(2)O_(3)、硫代乙酰胺、坡缕石(PGS)为原料,采用水热法制备了PGS负载In_(2)O_(3)/In_(2)S_(3)的复合材料(PGS-In_(2)O_(3)/In_(2)S_(3)),通过XRD、SEM、TEM、BET、紫外-可见漫反射光谱对PGS-In_(2)O_(3)/In_(2)S_(3)进行了表征,测... 以In_(2)O_(3)、硫代乙酰胺、坡缕石(PGS)为原料,采用水热法制备了PGS负载In_(2)O_(3)/In_(2)S_(3)的复合材料(PGS-In_(2)O_(3)/In_(2)S_(3)),通过XRD、SEM、TEM、BET、紫外-可见漫反射光谱对PGS-In_(2)O_(3)/In_(2)S_(3)进行了表征,测试了其电化学交流阻抗谱(EIS),考察了不同酸化PGS质量分数(以酸化PGS和In_(2)O_(3)总质量计,下同)的PGS-In_(2)O_(3)/In_(2)S_(3)光催化降解甲基橙(MO)的性能、抗离子干扰和循环使用性能。结果表明,PGS-In_(2)O_(3)/In_(2)S_(3)的In_(2)O_(3)颗粒表面附着木耳状In_(2)S_(3)纳米片及针状PGS,其在200~580 nm区域有较强的光吸收。PGS质量分数为50%的50%PGS-In_(2)O_(3)/In_(2)S_(3)具有最佳的光催化降解MO活性,在可见光下照射30 min,20 mg50%PGS-In_(2)O_(3)/In_(2)S_(3)对30 m L质量浓度为20 mg/L的MO水溶液的光催化降解率为98.8%。超氧基自由基(·O_(2)^(-))、空穴(h^(+))是50%PGS-In_(2)O_(3)/In_(2)S_(3)光催化降解MO的主要活性物种,除H_(2)PO_(4)^(-)外,溶液中Cl^(-)、Na^(+)等常见离子对其光催化降解MO没有影响;50%PGS-In_(2)O_(3)/In_(2)S_(3)对孔雀石绿、罗丹明B、结晶紫、亚甲基蓝等染料均表现出较好的物理吸附和光催化降解效果。PGS与In_(2)O_(3)/In_(2)S_(3)间的内置电场降低了In_(2)O_(3)/In_(2)S_(3)光生载流子的复合率。 展开更多
关键词 In_(2)O_(3)/In_(2)S_(3) 坡缕石 光催化剂 光降解 染料 水处理技术
下载PDF
Electrochemical Generation of Cubic Shaped Nano Zn_2SnO_4 Photocatalysts 被引量:5
17
作者 Chandrappa K.Govindappa Venkatesha T.Venkatarangaiah Sharifah B.Abd Hamid 《Nano-Micro Letters》 SCIE EI CAS 2013年第2期101-110,共10页
In this contribution, an efficient and simple two-step hybrid electrochemical-thermal route was developed for the synthesis of cubic shaped Zn_2SnO_4 (ZTO) nanoparticles using aqueous sodium bicarbonate(NaHCO_3) and s... In this contribution, an efficient and simple two-step hybrid electrochemical-thermal route was developed for the synthesis of cubic shaped Zn_2SnO_4 (ZTO) nanoparticles using aqueous sodium bicarbonate(NaHCO_3) and sodium stannate(Na_2SnO_3) electrolyte. The sacrificial Zn was used as anode and cathode in an undivided cell under galvanostatic mode at room temperature. The bath concentration and current density were respectively varied from 30 to 120 mmol and 0.05 to 1.5 A/dm^2. The electrochemically generated precursor was calcined for an hour at different range of temperature from 60 to 600. The crystallite sizes in the range of 24-53 nm were calculated based on Debye-Scherrer equation. Scanning electron microscope and transmission electron microscopy results reveal that all the particles have cubic morphology with diameter of40-50 nm. The as-prepared ZTO samples showed higher catalytic activity towards the degradation of methylene blue(MB) dye, and 90% degradation was found for the sample calcined at 600, which is greater than that of commercial TiO_2-P25 photocatalysts. The photodegradation efficiency of ZTO samples was found to be a function of exposure time and the dye solution p H value. These results indicate that the ZTO nanoparticles may be employed to remove dyes from wastewater. 展开更多
关键词 ELECTROCHEMISTRY Zn2SnO4 photocatalyst CUBIC NANOPARTICLE
下载PDF
S-scheme Sb2WO6/g-C3N4 photocatalysts with enhanced visible-light-induced photocatalytic NO oxidation performance 被引量:11
18
作者 Yuyu Ren Yuan Li +2 位作者 Xiaoyong Wu Jinlong Wang Gaoke Zhang 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 2021年第1期69-77,共9页
Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers.To overcome this problem,S-scheme composites have been developed to fabricate ... Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers.To overcome this problem,S-scheme composites have been developed to fabricate photocatalysts.Herein,a novel S-scheme Sb2WO6/g-C3N4 nanocomposite was fabricated by an ultrasound-assisted method,which exhibited excellent performance for photocatalytic ppb-level NO removal.Compared with the pure constituents of the nanocomposite,the as-prepared 15%-Sb2WO6/g-C3N4 photocatalyst could remove more than 68%continuous-flowing NO(initial concentration:400 ppb)under visible-light irradiation in 30 min.The findings of the trapping experiments confirmed that•O2^–and h+were the important active species in the NO oxidation reaction.Meanwhile,the transient photocurrent response and PL spectroscopy analyses proved that the unique S-scheme structure of the samples could enhance the charge separation efficiency.In situ DRIFTS revealed that the photocatalytic reaction pathway of NO removal over the Sb2WO6/g-C3N4 nanocomposite occurred via an oxygen-induced route.The present work proposes a new concept for fabricating efficient photocatalysts for photocatalytic ppb-level NO oxidation and provides deeper insights into the mechanism of photocatalytic NO oxidation. 展开更多
关键词 Sb2WO6 g-C3N4 S-scheme photocatalyst Photocatalytic NO oxidation In situ DRIFTS
下载PDF
The photo-decomposition and self-restructuring dynamic equilibrium mechanism of Cu_(2)(OH)_(2)CO_(3)for stable photocatalytic CO_(2)reduction 被引量:1
19
作者 Yaqing Zhi Haoning Mao +5 位作者 Guangxing Yang Qiao Zhang Zhiting Liu Yonghai Cao Siyuan Yang Feng Peng 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第5期104-112,共9页
Developing suitable photocatalysts and understanding their intrinsic catalytic mechanism remain key challenges in the pursuit of highly active,good selective,and long-term stable photocatalytic CO_(2)reduction(PCO_(2)... Developing suitable photocatalysts and understanding their intrinsic catalytic mechanism remain key challenges in the pursuit of highly active,good selective,and long-term stable photocatalytic CO_(2)reduction(PCO_(2)R)systems.Herein,monoclinic Cu_(2)(OH)_(2)CO_(3)is firstly proven to be a new class of photocatalyst,which has excellent catalytic stability and selectivity for PCO_(2)R in the absence of any sacrificial agent and cocatalysts.Based on a Cu_(2)(OH)_(2)^(13)CO_(3)photocatalyst and 13CO_(2)two-sided^(13)C isotopic tracer strategy,and combined with in situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS)analysis and density functional theory(DFT)calculations,two main CO_(2)transformation routes,and the photo-decomposition and self-restructuring dynamic equilibrium mechanism of Cu_(2)(OH)_(2)CO_(3)are definitely revealed.The PCO_(2)R activity of Cu_(2)(OH)_(2)CO_(3)is comparable to some of state-of-the-art novel photocatalysts.Significantly,the PCO_(2)R properties can be further greatly enhanced by simply combining Cu_(2)(OH)_(2)CO_(3)with typical TiO_(2)to construct composites photocatalyst.The highest CO_(2)and CH_(4)production rates by 7.5 wt%Cu_(2)(OH)_(2)CO_(3)-TiO_(2)reach 16.4μmol g^(-1)h^(-1)and 116.0μmol g^(-1)h^(-1),respectively,which are even higher than that of some of PCO_(2)R systems containing sacrificial agents or precious metals modified photocatalysts.This work provides a better understanding for the PCO_(2)R mechanism at the atomic levels,and also indicates that basic carbonate photocatalysts have broad application potential in the future. 展开更多
关键词 CO_(2)photocatalytic reduction PHOTOCATALYSIS Basic copper carbonate SELF-RECONSTRUCTION photocatalyst
下载PDF
含钛高炉渣制备硅基TiO_(2)光催化剂及其性能研究
20
作者 李宁 王明月 +1 位作者 焦悦 苏毅 《化工新型材料》 CAS CSCD 北大核心 2024年第11期270-273,共4页
以含钛高炉渣为原料,采用水热法-酸解-煅烧工艺合成了亚微米片状结构硅基TiO_(2)光催化剂,研究了酸解反应浓度、酸解反应时间、光催化剂投加量及光照条件对其催化性能的影响。结果表明:当酸解反应浓度为1.2mol/L、酸解反应时间为5h、光... 以含钛高炉渣为原料,采用水热法-酸解-煅烧工艺合成了亚微米片状结构硅基TiO_(2)光催化剂,研究了酸解反应浓度、酸解反应时间、光催化剂投加量及光照条件对其催化性能的影响。结果表明:当酸解反应浓度为1.2mol/L、酸解反应时间为5h、光催化剂投加量为20mg时,紫外灯照射60min后亚甲基蓝降解率最高可达97.28%,可见光照射120min后亚甲基蓝降解率最高可达77.85%。 展开更多
关键词 含钛高炉渣 光催化剂 硅基TiO_(2) 亚甲基蓝 降解率
下载PDF
上一页 1 2 24 下一页 到第
使用帮助 返回顶部