Based on the research on rock burst phenomenon induced by the breakage of thick and hard roof around roadways and working faces in coal mines, a criterion of rock burst induced by roof breakage （RBRB） was proposed a...Based on the research on rock burst phenomenon induced by the breakage of thick and hard roof around roadways and working faces in coal mines, a criterion of rock burst induced by roof breakage （RBRB） was proposed and the model was built. Through the model, a method calculating the varied stresses induced by roof breakage in support objects and coal body was proposed and a unified formula was derived for the calculation of stress increment on support objects and coal body under different breaking forms of roof. Whilst the formula for calculating dynamic load was derived by introducing dynamic index Kd. The formula was verified in Huating Mine by stress measurement. According to the formula for stress increment calculating, the sensitivities of dynamic load parameters were further studied. The results show that the thickness and breaking depth of roof, width of support objeet are the sensitive factors. Based on the discussion of the model, six associated effective methods for rock burst prevention are obtained.展开更多
A non-blasting mechanized mining experiment was carried out with a high-frequency impact hammer,and the daily mining performance was recorded to explore the applicability of the high-frequency impact hammer in deep ha...A non-blasting mechanized mining experiment was carried out with a high-frequency impact hammer,and the daily mining performance was recorded to explore the applicability of the high-frequency impact hammer in deep hard rock mines.Before the field application,the scope of the excavation damage zone was monitored,and rock samples were obtained from the ore body to be mined to carry out a series of laboratory experiments.Field application results show that the overall excavation efficiency reaches 50.6 t/h,and the efficiency of pillar excavation after excavating stress relief slot reaches 158.2 t/h.The results indicate that the non-blasting mechanized mining using high-frequency impact hammer has a good application in deep hard rock mines,and the stress relief slot is conducive to mechanical excavation.In addition,the high-frequency impact hammer also exhibits the advantages of high utilization rate of labor hours,small lumpiness of spalling ore,little dust,and little excavation damage.Finally,according to the field application and laboratory experiment results,a non-blasting mechanized mining method for hard rock mines based on high-frequency impact hammer is proposed.展开更多
When tunnel boring machines(TBMs)excavate through jointed rock masses,the cutting efficiency is strongly affected by the shear strength of joints,the mechanism of which,however,remains poorly understood.In this study,...When tunnel boring machines(TBMs)excavate through jointed rock masses,the cutting efficiency is strongly affected by the shear strength of joints,the mechanism of which,however,remains poorly understood.In this study,a series of disc-cutter indentation tests were conducted on granite rock mass specimens with different joint shear strengths.During the indentation,the cracking process was recorded by a digital image correlation(DIC)system.The deformation and strength of specimens,cracking behavior,rock breakage mode and cutting efficiency were quantitatively investigated.In addition,to investigate the combined effects of joint shear strength,orientation and spacing on the rock breakage mechanism,numerical rock mass models were established based on a particle flow code PFC2D.Experimental results reveal that the cracking of primary and secondary cracks changes from the mixed shear-tensile to tensile mode in the initial stage,while the joint shear strength does not affect the cracking mode in the subsequent propagation process.The rock breakage mode is classified to an internal block breakage mode,a cross-joint breakage mode and a cutters-dependent breakage mode.The cross-joint breakage mode is optimal for improving the cutting efficiency.Numerical simulation results reveal that the increase in the joint shear strength changes the internal block breakage mode to cross-joint breakage mode for rock masses of particular ranges of joint orientation and spacing.These findings provide basis for improving the TBM cutting efficiency through jointed rock masses.展开更多
Demand is growing for explosive-free rock breakage systems for civil and mining engineering, and space industry applications. This paper highlights the work being undertaken in the Geomechanics Laboratory of Mc Gill U...Demand is growing for explosive-free rock breakage systems for civil and mining engineering, and space industry applications. This paper highlights the work being undertaken in the Geomechanics Laboratory of Mc Gill University to make a real application of microwave-assisted mechanical rock breakage to fullface tunneling machines and drilling. Comprehensive laboratory tests investigated the effect of microwave radiation on temperature profiles and strength reduction in hard rocks(norite, granite, and basalt)for a range of exposure times and microwave power levels. The heating rate on the surface of the rock specimens linearly decreased with distance between the sample and the microwave antenna, regardless of microwave power level and exposure time. Tensile and uniaxial compressive strengths were reduced with increasing exposure time and power level. Scanning electron micrographs(SEMs) highlighted fracture development in treated basalt. It was concluded that the microwave power level has a strong positive influence on the amount of heat damage induced to the rock surface. Numerical simulations of electric field intensity and wave propagation conducted with COMSOL Multiphysics~ software generated temperature profiles that were in close agreement with experimental results.展开更多
It has been an established fact that comminution processes, crushing and grinding, are most energy intensive processes which account for more than half of the total energy consumed in mineral industries.Various altern...It has been an established fact that comminution processes, crushing and grinding, are most energy intensive processes which account for more than half of the total energy consumed in mineral industries.Various alternative pre-treatment methods have been tried by experts around the globe. Although these methods yielded positive results in terms of reduction in energy consumption in crushing and particularly, in grinding operations at laboratory scale, their industrial application still remains an unresolved issue and challenge. Present review paper describes each one of these methods along with outcome of earlier studies and issues that need to be addressed through further rigorous experimental investigation.It also suggests the direction in which future studies can be carried out to meet the primary objective of making comminution processes more energy efficient than today they are.展开更多
The numerical simulation method to study rock breaking process and mechanism under high pressure water jet was developed with the continuous mechanics and the FEM theory. The rock damage model and the damage-coupling ...The numerical simulation method to study rock breaking process and mechanism under high pressure water jet was developed with the continuous mechanics and the FEM theory. The rock damage model and the damage-coupling model suited to analyze the whole process of water jet breaking rock were established with continuum damage mechanics and micro damage mechanics. The numerical results show the dynamic response of rock under water jet and the evolvement of hydrodynamic characteristic of jet during rock breaking is close to reality, and indicates that the body of rock damage and breakage under the general continual jet occurs within several milliseconds, the main damage form is tensile damage caused by rock unload and jet impact, and the evolvement of rock damage shows a step-change trend. On the whole, the numerical results can agree with experimental conclusions, which manifest that the analytical method is feasible and can be applied to guide the research and application of jet breaking rock theory.展开更多
Broken coal and rock(BCR)are an important component medium of the caving zone in the goaf(or gob),as well as the main filling material of fault fracture zone and collapse column.The compaction seepage characteristics ...Broken coal and rock(BCR)are an important component medium of the caving zone in the goaf(or gob),as well as the main filling material of fault fracture zone and collapse column.The compaction seepage characteristics of BCR directly affect the safe and efficient mining of coal mines.Thus,numerous laboratory studies have focused on the compaction seepage characteristics of BCR.This paper first outlines the engineering problems involved in the BCR during coal mining including the air leakage,the spontaneous combustion,the gas drainage,and the un-derground reservoirs in the goaf.Water inrush related to tectonics such as faults and collapse columns and surface subsidence related to coal gangue filling and mining also involve the compaction seepage characteristics of BCR.Based on the field problems of BCR,many attempts have been made to mimic field environments in laboratory tests.The experimental equipment(cavity size and shape,acoustic emission,CT,etc.)and experimental design for the BCR were firstly reviewed.The main objects of laboratory analysis can be divided into compression tests and seepage test.During the compaction test,the main research focuses on the bearing deformation characteristics(stress-strain curve),pore evolution characteristics,and re-crushing characteristics of BCR.The seepage test mainly uses gas or water as the main medium to study the evolution characteristics of permeability under different compaction stress conditions.In the laboratory tests,factors such as the type of coal and rock mass,particle size,particle shape,water pressure,temperature,and stress path are usually considered.The lateral compression test of BCR can be divided into three stages,including the self-adjustment stage,the broken stage,and the elastic stage or stable stage.At each stage,stress,deformation,porosity,energy,particle size and breakage rate all have their own characteristics.Seepage test regarding the water permeability experiment of BCR is actually belong to variable mass seepage.While the experimental test still focuses on the influence of stress on the pore structure of BCR in terms of gas permeability.Finally,future laboratory tests focus on the BCR related coal mining including scaling up,long term loading and water immersion,mining stress path matching were discussed.展开更多
基金Project(2010CB226805) supported by the National Basic Research Program of ChinaProjects(30370412,30670558) supported by the National Natural Science Foundation of ChinaProject(SKLCRSM10X05) supported by the Self-research Program of the Key Laboratory of Coal Resources and Safe Mining,China
文摘Based on the research on rock burst phenomenon induced by the breakage of thick and hard roof around roadways and working faces in coal mines, a criterion of rock burst induced by roof breakage （RBRB） was proposed and the model was built. Through the model, a method calculating the varied stresses induced by roof breakage in support objects and coal body was proposed and a unified formula was derived for the calculation of stress increment on support objects and coal body under different breaking forms of roof. Whilst the formula for calculating dynamic load was derived by introducing dynamic index Kd. The formula was verified in Huating Mine by stress measurement. According to the formula for stress increment calculating, the sensitivities of dynamic load parameters were further studied. The results show that the thickness and breaking depth of roof, width of support objeet are the sensitive factors. Based on the discussion of the model, six associated effective methods for rock burst prevention are obtained.
基金supported by the National Natural Science Foundation of China (Nos. 52174099, 51904333)the Natural Science Foundation of Hunan Province, China (No. 2021JJ30842)
文摘A non-blasting mechanized mining experiment was carried out with a high-frequency impact hammer,and the daily mining performance was recorded to explore the applicability of the high-frequency impact hammer in deep hard rock mines.Before the field application,the scope of the excavation damage zone was monitored,and rock samples were obtained from the ore body to be mined to carry out a series of laboratory experiments.Field application results show that the overall excavation efficiency reaches 50.6 t/h,and the efficiency of pillar excavation after excavating stress relief slot reaches 158.2 t/h.The results indicate that the non-blasting mechanized mining using high-frequency impact hammer has a good application in deep hard rock mines,and the stress relief slot is conducive to mechanical excavation.In addition,the high-frequency impact hammer also exhibits the advantages of high utilization rate of labor hours,small lumpiness of spalling ore,little dust,and little excavation damage.Finally,according to the field application and laboratory experiment results,a non-blasting mechanized mining method for hard rock mines based on high-frequency impact hammer is proposed.
基金The financial support from the National Natural Science Foundation of China(Grant Nos.41831290,41907167 and 51708354)Natural Science Foundation of Zhejiang Province(Grant No.LTGS23E040001)Natural Science Foundation of Hunan Province(Grant No.2022JJ40521)is greatly appreciated.
文摘When tunnel boring machines(TBMs)excavate through jointed rock masses,the cutting efficiency is strongly affected by the shear strength of joints,the mechanism of which,however,remains poorly understood.In this study,a series of disc-cutter indentation tests were conducted on granite rock mass specimens with different joint shear strengths.During the indentation,the cracking process was recorded by a digital image correlation(DIC)system.The deformation and strength of specimens,cracking behavior,rock breakage mode and cutting efficiency were quantitatively investigated.In addition,to investigate the combined effects of joint shear strength,orientation and spacing on the rock breakage mechanism,numerical rock mass models were established based on a particle flow code PFC2D.Experimental results reveal that the cracking of primary and secondary cracks changes from the mixed shear-tensile to tensile mode in the initial stage,while the joint shear strength does not affect the cracking mode in the subsequent propagation process.The rock breakage mode is classified to an internal block breakage mode,a cross-joint breakage mode and a cutters-dependent breakage mode.The cross-joint breakage mode is optimal for improving the cutting efficiency.Numerical simulation results reveal that the increase in the joint shear strength changes the internal block breakage mode to cross-joint breakage mode for rock masses of particular ranges of joint orientation and spacing.These findings provide basis for improving the TBM cutting efficiency through jointed rock masses.
基金the Natural Sciences and Engineering Research Council of Canada(NSERC)with the collaboration of IAMGold,Glencore,and Vale Canada,who generously contributed financially to this research project
文摘Demand is growing for explosive-free rock breakage systems for civil and mining engineering, and space industry applications. This paper highlights the work being undertaken in the Geomechanics Laboratory of Mc Gill University to make a real application of microwave-assisted mechanical rock breakage to fullface tunneling machines and drilling. Comprehensive laboratory tests investigated the effect of microwave radiation on temperature profiles and strength reduction in hard rocks(norite, granite, and basalt)for a range of exposure times and microwave power levels. The heating rate on the surface of the rock specimens linearly decreased with distance between the sample and the microwave antenna, regardless of microwave power level and exposure time. Tensile and uniaxial compressive strengths were reduced with increasing exposure time and power level. Scanning electron micrographs(SEMs) highlighted fracture development in treated basalt. It was concluded that the microwave power level has a strong positive influence on the amount of heat damage induced to the rock surface. Numerical simulations of electric field intensity and wave propagation conducted with COMSOL Multiphysics~ software generated temperature profiles that were in close agreement with experimental results.
基金the support provided by Indian Institute of Technology,Kharagpur
文摘It has been an established fact that comminution processes, crushing and grinding, are most energy intensive processes which account for more than half of the total energy consumed in mineral industries.Various alternative pre-treatment methods have been tried by experts around the globe. Although these methods yielded positive results in terms of reduction in energy consumption in crushing and particularly, in grinding operations at laboratory scale, their industrial application still remains an unresolved issue and challenge. Present review paper describes each one of these methods along with outcome of earlier studies and issues that need to be addressed through further rigorous experimental investigation.It also suggests the direction in which future studies can be carried out to meet the primary objective of making comminution processes more energy efficient than today they are.
基金Project supported by the National Natural Science Foundation of China (Nos.50574062 and 50234030) the Post-Doctoral Science Foundation of China (No.2004035692)
文摘The numerical simulation method to study rock breaking process and mechanism under high pressure water jet was developed with the continuous mechanics and the FEM theory. The rock damage model and the damage-coupling model suited to analyze the whole process of water jet breaking rock were established with continuum damage mechanics and micro damage mechanics. The numerical results show the dynamic response of rock under water jet and the evolvement of hydrodynamic characteristic of jet during rock breaking is close to reality, and indicates that the body of rock damage and breakage under the general continual jet occurs within several milliseconds, the main damage form is tensile damage caused by rock unload and jet impact, and the evolvement of rock damage shows a step-change trend. On the whole, the numerical results can agree with experimental conclusions, which manifest that the analytical method is feasible and can be applied to guide the research and application of jet breaking rock theory.
基金support for this work is provided by the National Key R&D Program of China(2023YFC3012101)the National Natural Science Foundation of China(52104155)+1 种基金the Natural Science Foundation of Beijing(8212032)the Fundamental Research Funds for the Central Universities(2023ZKPYNY03).
文摘Broken coal and rock(BCR)are an important component medium of the caving zone in the goaf(or gob),as well as the main filling material of fault fracture zone and collapse column.The compaction seepage characteristics of BCR directly affect the safe and efficient mining of coal mines.Thus,numerous laboratory studies have focused on the compaction seepage characteristics of BCR.This paper first outlines the engineering problems involved in the BCR during coal mining including the air leakage,the spontaneous combustion,the gas drainage,and the un-derground reservoirs in the goaf.Water inrush related to tectonics such as faults and collapse columns and surface subsidence related to coal gangue filling and mining also involve the compaction seepage characteristics of BCR.Based on the field problems of BCR,many attempts have been made to mimic field environments in laboratory tests.The experimental equipment(cavity size and shape,acoustic emission,CT,etc.)and experimental design for the BCR were firstly reviewed.The main objects of laboratory analysis can be divided into compression tests and seepage test.During the compaction test,the main research focuses on the bearing deformation characteristics(stress-strain curve),pore evolution characteristics,and re-crushing characteristics of BCR.The seepage test mainly uses gas or water as the main medium to study the evolution characteristics of permeability under different compaction stress conditions.In the laboratory tests,factors such as the type of coal and rock mass,particle size,particle shape,water pressure,temperature,and stress path are usually considered.The lateral compression test of BCR can be divided into three stages,including the self-adjustment stage,the broken stage,and the elastic stage or stable stage.At each stage,stress,deformation,porosity,energy,particle size and breakage rate all have their own characteristics.Seepage test regarding the water permeability experiment of BCR is actually belong to variable mass seepage.While the experimental test still focuses on the influence of stress on the pore structure of BCR in terms of gas permeability.Finally,future laboratory tests focus on the BCR related coal mining including scaling up,long term loading and water immersion,mining stress path matching were discussed.
