A localization algorithm using distance and angle information is proposed in wireless sensor networks. Assuming that node axial orientations are unknown, all angles are measured to calculate the angle differences betw...A localization algorithm using distance and angle information is proposed in wireless sensor networks. Assuming that node axial orientations are unknown, all angles are measured to calculate the angle differences between two nodes viewed by the third one. Then, localization problems are formulated as convex optimization ones and all geometric relationships among different nodes in the communication range are transformed into linear or quadratic constraints. If all measurements are accurate, the localization problem can be formulated as linear programming （LP）. Otherwise, by incorporating auxiliary variables, it can be regarded as quadratic programming （QP）. Simulations show the effectiveness of the proposed algorithm.展开更多
An accelerometry-based gait analysis approach via the platform of sensor network is reported in this paper. The hardware units of the sensor network are wearable accelerometers that are attached at the limbs of human ...An accelerometry-based gait analysis approach via the platform of sensor network is reported in this paper. The hardware units of the sensor network are wearable accelerometers that are attached at the limbs of human body. For the specific task of gait analysis, flexion angles of the thighs during gait cycles are computed. A Kalman filter is designed to estimate the flexion-extension angle, angular velocity of the thigh using the output of the wearable accelerometers. The proposed approach has been applied to four subjects and the performance is compared with video-based approach. Comparative results indicate that with the proposed Kalman filter, the sensor network is able to track the movement of the thighs during gait cycles with good accuracy and simultaneously detect major gait event of foot contact from the waveform of the angular velocity.展开更多
Aiming at large error when inertial devices measure the roll angle under high overload conditions,the article designs one kind of roll angle measurement system based on magneto-resistive sensor which calculates the ro...Aiming at large error when inertial devices measure the roll angle under high overload conditions,the article designs one kind of roll angle measurement system based on magneto-resistive sensor which calculates the roll angle by micro controller STM32.Experiment results of a triaxial turntable show that using magneto-resistive sensor to measure roll angle is feasible and of high accuracy,and it can calculate the roll angle of the conventional projectile with the error in 1°.展开更多
In this paper, we explore the technology of tracking a group of targets with correlated motions in a wireless sensor network. Since a group of targets moves collectively and is restricted within a limited region, it i...In this paper, we explore the technology of tracking a group of targets with correlated motions in a wireless sensor network. Since a group of targets moves collectively and is restricted within a limited region, it is not worth consuming scarce resources of sensors in computing the trajectory of each single target. Hence, in this paper, the problem is modeled as tracking a geographical continuous region covered by all targets. A tracking algorithm is proposed to estimate the region covered by the target group in each sampling period. Based on the locations of sensors and the azimuthal angle of arrival （AOA） information, the estimated region covering all the group members is obtained. Algorithm analysis provides the fundamental limits to the accuracy of localizing a target group. Simulation results show that the proposed algorithm is superior to the existing hull algorithm due to the reduction in estimation error, which is between 10% and 40% of the hull algorithm, with a similar density of sensors. And when the density of sensors increases, the localization accuracy of the proposed algorithm improves dramatically.展开更多
为了解决传统室内定位技术成本较高、稳定性差以及难于部署等问题,提出一种将到达时间(time of arrival,TOA)与到达角(angle of arrival,AOA)相结合的室内定位系统.该系统由定位基站与被控定位单元组成,其特征在于使用对射式布置的超声...为了解决传统室内定位技术成本较高、稳定性差以及难于部署等问题,提出一种将到达时间(time of arrival,TOA)与到达角(angle of arrival,AOA)相结合的室内定位系统.该系统由定位基站与被控定位单元组成,其特征在于使用对射式布置的超声波传感器获取定位基站与被控定位单元之间的距离特征,利用角度传感器获取被控定位单元相对于定位基站的角度特征,以单基站就实现了精确的室内定位过程.分析了该系统基本结构与原理,建立定位与控制模型,在一定范围内对其定点定位精度与跟随定位精度进行了实验验证.实验结果表明:该系统结构简单,易于安装布置,鲁棒性强,在测试范围内的最大定点定位误差不超过5 cm,跟随定位误差不超过15 cm.展开更多
文摘A localization algorithm using distance and angle information is proposed in wireless sensor networks. Assuming that node axial orientations are unknown, all angles are measured to calculate the angle differences between two nodes viewed by the third one. Then, localization problems are formulated as convex optimization ones and all geometric relationships among different nodes in the communication range are transformed into linear or quadratic constraints. If all measurements are accurate, the localization problem can be formulated as linear programming （LP）. Otherwise, by incorporating auxiliary variables, it can be regarded as quadratic programming （QP）. Simulations show the effectiveness of the proposed algorithm.
基金Supported by Science & Engineering Research Council of Singapore (052 118 0052)
文摘An accelerometry-based gait analysis approach via the platform of sensor network is reported in this paper. The hardware units of the sensor network are wearable accelerometers that are attached at the limbs of human body. For the specific task of gait analysis, flexion angles of the thighs during gait cycles are computed. A Kalman filter is designed to estimate the flexion-extension angle, angular velocity of the thigh using the output of the wearable accelerometers. The proposed approach has been applied to four subjects and the performance is compared with video-based approach. Comparative results indicate that with the proposed Kalman filter, the sensor network is able to track the movement of the thighs during gait cycles with good accuracy and simultaneously detect major gait event of foot contact from the waveform of the angular velocity.
基金National Natural Science Foundation of China(No.61004127)
文摘Aiming at large error when inertial devices measure the roll angle under high overload conditions,the article designs one kind of roll angle measurement system based on magneto-resistive sensor which calculates the roll angle by micro controller STM32.Experiment results of a triaxial turntable show that using magneto-resistive sensor to measure roll angle is feasible and of high accuracy,and it can calculate the roll angle of the conventional projectile with the error in 1°.
基金Project supported by the State Key Program of the National Natural Science Foundation of China(Grant No.60835001)the National Natural Science Foundation of China(Grant No.61104068)the Natural Science Foundation of Jiangsu Province China(Grant No.BK2010200)
文摘In this paper, we explore the technology of tracking a group of targets with correlated motions in a wireless sensor network. Since a group of targets moves collectively and is restricted within a limited region, it is not worth consuming scarce resources of sensors in computing the trajectory of each single target. Hence, in this paper, the problem is modeled as tracking a geographical continuous region covered by all targets. A tracking algorithm is proposed to estimate the region covered by the target group in each sampling period. Based on the locations of sensors and the azimuthal angle of arrival （AOA） information, the estimated region covering all the group members is obtained. Algorithm analysis provides the fundamental limits to the accuracy of localizing a target group. Simulation results show that the proposed algorithm is superior to the existing hull algorithm due to the reduction in estimation error, which is between 10% and 40% of the hull algorithm, with a similar density of sensors. And when the density of sensors increases, the localization accuracy of the proposed algorithm improves dramatically.
文摘为了解决传统室内定位技术成本较高、稳定性差以及难于部署等问题,提出一种将到达时间(time of arrival,TOA)与到达角(angle of arrival,AOA)相结合的室内定位系统.该系统由定位基站与被控定位单元组成,其特征在于使用对射式布置的超声波传感器获取定位基站与被控定位单元之间的距离特征,利用角度传感器获取被控定位单元相对于定位基站的角度特征,以单基站就实现了精确的室内定位过程.分析了该系统基本结构与原理,建立定位与控制模型,在一定范围内对其定点定位精度与跟随定位精度进行了实验验证.实验结果表明:该系统结构简单,易于安装布置,鲁棒性强,在测试范围内的最大定点定位误差不超过5 cm,跟随定位误差不超过15 cm.
