Noninvasive Detection of Cerebral Blood Flow and Blood Oxygen Based on Inductive Sensing Technology and Near Infrared Spectroscopy

The synchronous monitoring of cerebral blood flow and blood oxygen levels plays a pivotal role in the prevention,diagnosis,and treatment of cerebrovascular diseases.This study introduces a novel noninvasive device utilizing inductive sensing and near-infrared spectroscopy technology to facilitate simultaneous monitoring of cerebral blood flow and blood oxygen levels.The device consists of modules for cerebral blood flow monitoring,cerebral blood oxygen monitoring,control,communication,and a host machine.Through experiments conducted on healthy subjects,it was confirmed that the device can effectively achieve synchronous monitoring and recording of cerebral blood flow and blood oxygen signals.The results demonstrate the device’s capability to accurately measure these signals simultaneously.This technology enables dynamic monitoring of cerebral blood flow and blood oxygen signals with potential clinical applications in preventing,diagnosing,treating cerebrovascular diseases while reducing their associated harm.

Benchmarking dynamic properties of structures using non-contact sensing

Non-contact sensing can be a rapid and convenient alternative for determining structure response compared to conventional instrumentation.Computer vision has been broadly implemented to enable accurate non-contact dynamic response measurements for structures.This study has analyzed the effect of non-contact sensors,including type,frame rate,and data collection platform,on the performance of a novel motion detection technique.Video recordings of a cantilever column were collected using a high-speed camera mounted on a tripod and an unmanned aerial system(UAS)equipped with visual and thermal sensors.The test specimen was subjected to an initial deformation and released.Specimen acceleration data were collected using an accelerometer installed on the cantilever end.The displacement from each non-contact sensor and the acceleration from the contact sensor were analyzed to measure the specimen′s natural frequency and damping ratio.The specimen′s first fundamental frequency and damping ratio results were validated by analyzing acceleration data from the top of the specimen and a finite element model.

Retrieval algorithm of quantitative analysis of passive Fourier transform infrared (FTRD) remote sensing measurements of chemical gas cloud from measuring the transmissivity by passive remote Fourier transform infrared

Passive Fourier transform infrared （FTIR） remote sensing measurement of chemical gas cloud is a vital technology. It takes an important part in many fields for the detection of released gases. The principle of concentration measurement is based on the Beer-Lambert law. Unlike the active measurement, for the passive remote sensing, in most cases, the difference between the temperature of the gas cloud and the brightness temperature of the background is usually a few kelvins. The gas cloud emission is almost equal to the background emission, thereby the emission of the gas cloud cannot be ignored. The concentration retrieval algorithm is quite different from the active measurement. In this paper, the concentration retrieval algorithm for the passive FTIR remote measurement of gas cloud is presented in detail, which involves radiative transfer model, radiometric calibration, absorption coefficient calculation, et al. The background spectrum has a broad feature, which is a slowly varying function of frequency. In this paper, the background spectrum is fitted with a polynomial by using the Levenberg-Marquardt method which is a kind of nonlinear least squares fitting algorithm. No background spectra are required. Thus, this method allows mobile, real-time and fast measurements of gas clouds.

STUDY ON TRANSMISSION MECHANISM OF THERMAL INFRARED REMOTE SENSING FOR ABRUPT GEOTHERMAL ANOMALY IN VOLCANIC REGION

Experiment researches have proven that there is an obvious phenomenon of abrupt geothermal anomaly in volcanic region in the forewarning period of volcano eruption, which is closely related to the geological structure, the cause, the scale and the type of volcano etc. On the other hand, this kind of geothermal anomaly is an important sign to monitor volcano activity by thermal infrared remote sensing techniques. This paper discusses the feature of abrupt geothermal anomaly, the transmission mechanism of geothermal anomaly and the radiation transmission mechanism of heat field of terrene in volcanic region. By analyzing mechanism of terrene temperature rising by way of conduction and convection of heat, we have presented the transmission equation of atmosphere for thermal infrared radiation based on the effective radiation of objects. The related problems of noise interference in the processes of transmission for thermal infrared radiation will be discussed in the later paper.

Numerical Experiment of Combined Infrared and Ultraviolet Radiation Remote Sensing to Determine the Profile and Total Content of Atmospheric Ozone

A new remote sensing method is described to determine the vertical distribution and total content of atmospheric ozone. The method combines surface infrared, satellite infrared and ultraviolet channels. The width of the infrared channels is 0.01 cm-1, less than Lorentz half-width at the earth's surface, rather than the present width, because these channels can obtain information about variations in the ozone profile below the profile main-peak. The numerical experiments show that the method has a satisfactory precision in determining total ozone content, just about I percent error, and vertical distribution from the earth to 65 km space. In addition, some semi-analysis functions lor calculating backscattered ultraviolet and a relaxation equation are described in this paper.

Improving wavelet reconstruction algorithm to achieve comprehensive application of thermal infrared remote sensing data from TM and MODIS

According to the data characteristics of Landsat thematic mapper （TM） and MODIS, a new fu sion algorithm about thermal infrared data has been proposed in the article based on improving wave let reconstruction. Under the domain of neighborhood wavelet reconstruction, data of TM and MO DIS are divided into three layers using wavelet decomposition. The texture information of TM data is retained by fusing highfrequency information. The neighborhood correction coefficient method （NC CM） is set up based on the search neighborhood of a certain size to fuse lowfrequency information. Thermal infrared value of MODIS data is reduced to the space value of TM data by applying NCCM. The data with high spectrum, high spatial and high temporal resolution, are obtained through the al gorithm in the paper. Verification results show that the texture information of TM data and high spec tral information of MODIS data could be preserved well by the fusion algorithm. This article could provide technical support for high precision and fast extraction of the surface environment parame ters.

The actuality and progress of whole sky infrared cloud remote sensing techniques

Clouds are crucial regulators of both weather and climate. Properties such as the amount,type,height,distribution and movement of them have an impact on the earth's radiation budget and the hydrological cycle,thus cloud observation is very important. The disadvantages of zenith pointing measuring instruments and whole sky visible imagers limit the application of them.A summary of the actuality and application of ground-based whole sky infrared cloud measuring instruments and analyses of the techniques of radiometric calibrations,removal of atmospheric emission and calculation of cloud cover,amount,type are conducted to promote the automatically observation of the whole sky. Fully considering whole sky infrared cloud sounding theories,techniques and applications,there are still a lot of studies on improving the properties of instruments,enhancing the techniques of cloud base height measurements and establishing instrumental cloud classification criterion before actual operations.

Analysis of the Ability of Infrared Water Vapor Channel for Moisture Remote Sensing in the Lower Atmosphere

The ability of HIRS/2 and GOES I/M infrared water wapor channels for moisture remote sensing in the lower atmosphere has been analyzed. It is found that the HIRS/2 channel 10 seems not to be an optimal channel for water vapor remote sensing in the lower part of the atmosphere, we can find other channels that are more sensitive to moisture variation in the lower atmosphere and might be more useful for low level atmospheric moisture remote sensing.

Industrial Temperature Monitoring System Design Based on ZigBee and Infrared Temperature Sensing

In the industrial field, long running of the equipment easily leads local temperature of the equipment to rise. This is a security risk. For this problem, we have designed a set of remote wireless temperature monitoring system. Based on ZigBee technology, we have a remote wireless networking temperature monitoring of a lot of equipment scattered in various locations of factories and enterprises. The system uses infrared temperature sensor TS118-3 gathering temperature information. After a signal conditioning circuit, we use a wireless RF single-chip CC2530 wirelessly transmitting the temperature of the measured target to the receiving node. The receiving node uploads the data to a computer by RS232.PC software displays real-time temperature information.

Airborne Shortwave Infrared Spectral Remote Sensing as a Direct Prospecting Method for Oil and Gas Resources

The spectral characters of hydrocarbons in some oil-bearing strata and soil layers over oil and gas reservoirs in the Junggar Basin and northern Tarim Basin in Xinjiang are compared with those of chemically pure hydrocarbons. The hydrocarbons are characterized by the bi-absorption at 2310nm and 2350nm. Hydrocarbon and radioactive anomalies in oil and gas terrains are found much more widespread than carbonate altcrations. Based on the spectra of heavy hydrocarbons related to oil between 2270nm and 2460nm and refined data treatme nt, remote sensing may hold encouraging promise as a directly prospecting technique for oil and gas resources.

Machine learning empowered COVID-19 patient monitoring using non-contact sensing:An extensive review

The severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),which caused the coronavirus disease 2019(COVID-19)pandemic,has affected more than 400 million people worldwide.With the recent rise of new Delta and Omicron variants,the efficacy of the vaccines has become an important question.The goal of various studies has been to limit the spread of the virus by utilizing wireless sensing technologies to prevent human-to-human interactions,particularly for healthcare workers.In this paper,we discuss the current literature on invasive/contact and non-invasive/noncontact technologies(including Wi-Fi,radar,and software-defined radio)that have been effectively used to detect,diagnose,and monitor human activities and COVID-19 related symptoms,such as irregular respiration.In addition,we focused on cutting-edge machine learning algorithms(such as generative adversarial networks,random forest,multilayer perceptron,support vector machine,extremely randomized trees,and k-nearest neighbors)and their essential role in intelligent healthcare systems.Furthermore,this study highlights the limitations related to non-invasive techniques and prospective research directions.

Highly-sensitive NO,NO2,and NH3 measurements with an open-multipass cell based on mid-infrared wavelength modulation spectroscopy

A compact prototype based on mid-infrared wavelength modulation spectroscopy（WMS）is developed for the simul-taneous monitoring of NO,NO2,and NH3 in the urban area.Three quantum cascade lasers（QCLs）with central frequencies around 1900.0 cm^-1,1600.0 cm^-1,and 1103.4 cm^-1are used for NO,NO2,and NH3detections,respectively,by timedivision multiplex.An open-path multi-pass cell of 60-m optical path length is applied to the instrument for high sensitivity and reducing the response time to less than 1 s.The prototype achieves a sub-ppb detection limit for all the three target gases with an average time of about 100 s.The instrument is installed in the Jiangsu environmental monitoring center to conduct performance tests on ambient air.Continuous 24-hour measurements show good agreement with the results of a reference instrument based on the chemiluminescence technique.

Interpreting the Shortwave Infrared &Thermal Infrared Regions of Remote Sensed Electromagnetic Spectrum with Application for Mineral-Deposits Exploration

The ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer) data, including all the 3 parts: VNIR (Visible and Near-Infrared), SWIR (Short Wave Infrared), TIR (Thermal Infrared), were applied for extraction of mineral deposits, such as the Ni-Cu deposit in eastern Tianshan, the gypsum in western Tianshan, and the borax in Tibetan. This paper discusses the extraction methodology using the ASTER remote sensing data and reveals the good extraction results. This paper bravely represents the summary of the main achievement for this field by the scientists in other countries and gives a comparison with the works by others. The new achievements, described in this paper, comprise the extraction of anomalies for Ni-Cu deposit, gypsum, and borax.

Monitoring coal fires in Datong coalfield using multi-source remote sensing data

Numerous coal fires burn underneath the Datong coalfield because of indiscriminate mining.Landsat TM/ETM,unmanned aerial vehicle（UAV）,and infrared thermal imager were employed to monitor underground coal fires in the Majiliang mining area.The thermal field distributions of this area in 2000,2002,2006,2007,and 2009 were obtained using Landsat TM/ETM.The changes in the distribution were then analyzed to approximate the locations of the coal fires.Through UAV imagery employed at a very high resolution（0.2 m）,the texture information,linear features,and brightness of the ground fissures in the coal fire area were determined.All these data were combined to build a knowledge model of determining fissures and were used to support underground coal fire detection.An infrared thermal imager was used to map the thermal field distribution of areas where coal fire is serious.Results were analyzed to identify the hot spot trend and the depth of the burning point.

A commentary review on the use of normalized diff erence vegetation index(NDVI)in the era of popular remote sensing

The Normalized Diff erence Vegetation Index(NDVI),one of the earliest remote sensing analytical products used to simplify the complexities of multi-spectral imagery,is now the most popular index used for vegetation assessment.This popularity and widespread use relate to how an NDVI can be calculated with any multispectral sensor with a visible and a near-IR band.Increasingly low costs and weights of multispectral sensors mean they can be mounted on satellite,aerial,and increasingly—Unmanned Aerial Systems(UAS).While studies have found that the NDVI is effective for expressing vegetation status andquantified vegetation attributes,its widespread use and popularity,especially in UAS applications,carry inherent risks of misuse with end users who received little to no remote sensing education.This article summarizes the progress of NDVI acquisition,highlights the areas of NDVI application,and addresses the critical problems and considerations in using NDVI.Detailed discussion mainly covers three aspects:atmospheric eff ect,saturation phenomenon,and sensor factors.The use of NDVI can be highly eff ective as long as its limitations and capabilities are understood.This consideration is particularly important to the UAS user community.

Progress and development on multi-parameters remote sensing application in earthquake monitoring in China

In this paper, the progress and development on remote sensing technology applied in earthquake monitoring research are summarized, such as differential interference synthetic aperture radar （D-InSAR）, infrared remote sensing, and seismo-ionospheric detecting. Many new monitoring data in this domain have been used, and new data processing methods have been developed to obtain high-precision images about crustal deformation, outgoing longwave radiation （OLR）, surface latent heat flux （SLHF）, and ionospheric parameters. The development in monitoring technology and data processing technique largely enriches earthquake research information and provides new tools for earthquake stereoscope monitoring system, especially on the space part. Finally, new developing trend in this area was introduced, and some key problems in future work were pointed out.

Simulations of Aerosol Optical Properties to Top of Atmospheric Reflected Sunlight in the Near Infrared CO_2 Weak Absorption Band

Over the Asian continent,high aerosol loading is critical to ensure the high accuracy of CO_2 retrieval in the near infrared absorption band.Simulations were performed to explore the effect of light path modification by aerosol son the atmospheric CO_2 near infrared band(6140-6270 cm^(-1)).The Vector LInearized Discrete Ordinate Radiative Transfer(VLIDORT) model and the Line-By-Line Radiative Transfer Model(LBLRTM) were used for forward calculations.The U.S.standard atmosphere was used for atmospheric profiles.The results indicate that the aerosols caused similar effects to increases in CO_2 in the planetary boundary layer and became more significant with aerosol layer rising while aerosol optical depth was 0.1.This effect will cause an over estimation of the CO_2 mixing ratio in the retrieval process and an under estimation in the aerosol layer.The results also indicate that the effect of urban and industrial aerosols is smaller than that of non-absorbing and dust aerosols because of the nearly constant absorption properties in the near infrared band.

Quantitative description of infrared radiation characteristics of preflawed sandstone during fracturing process

Previous studies show that infrared radiation temperature(IRT)abnormalities are always accompanied by the crack development in rocks under external loads.In this context,experiments were conducted on preflawed sandstone to investigate the infrared radiation characteristics during failure process.Two indicators were defined herein,i.e.coefficient of variation of IRT(CVIRT)and skewness of IRT(SIRT).The regression analysis shows that the IRT probability distributions during loading process fit the Gaussian model.The variations in the CVIRT are characterized by four stages:primary stage,steady stage,accelerating stage and post-peak stage.Besides,the variations in the SIRT are divided into three stages:primary stage,steady stage and failure and post-peak stage.The precursor point for preflawed rock failure is identified based on the CVIRTetime curve,with average precursor point of 83%of the peak stress.Compared with other IRT indicators,the proposed two IRT indicators have higher sensitivity to IRT abnormalities during failure process.Furthermore,the connection between the IRT indicators and the rock fracturing was investigated to interpret the IRT indicator abnormalities.Based on the Verhulst inverse function,a new quantitative model was presented to describe the primary stage,steady stage and accelerating stage of the CVIRTetime curve.The results obtained in this study can provide early-warning information for rock failure prediction.

INFRARED THERMAL IMAGE STUDY ON THE FOREWARNING OF COAL AND SANDSTONE FAILURE UNDER LOAD

In the experimental study, AGE-782 thermal instrument was used to detect the infrared radiation variation of coal and sandstone (wave-length range 3.6～5.5 μm was used). It's discovered that coal and sandstone failure under load have three kinds of infrared thermal features as well as infrared forewarning messages. That are: (1) temperature rises gradually but drops before failure ; (2) temperature rises gradually but quickly rises before failure; (3) first rises,then drops and lower temperature emerges before failure. The further researches and the prospect of micro-wave remote sensing detection .on ground pressure is also discussed.

Research on the Estimation Model of Soil Moisture Content Based on the Characteristics of Thermal Infrared Data

With the portable Fourier Transform Infrared Spectroscopy (FTIR), the reflectance spectra of soil samples with different moisture content are measured in laboratory for expounding the characteristic of radiation in the thermal infrared part of the spectrum with different soil moisture content. A model of estimating the moisture content in soil is attempted to make based on Moisture Diagnostic Index (MDI). In general,the spectral characteristic of soil emissivity in laboratory includes the following aspects.Firstly,in the region of 8.0-9.5 μm,along with the increase of soil moisture content,the emissivity of soil increases to varying degrees. The spectral curves are parallel relatively and have a tendency to become horizontal and the absorbed characteristic of reststrahlen is also weakened relatively with the increase of soil moisture in this region.Secondly,in the region of 11.0-14.0 μm,the emissivity of soil has a tendency of increasing.There is an absorption value near about 12.7 μm. As the soil moisture content increases,the depth of absorption also increases. This phenomenon may be caused by soil moisture absorption. Methods as derivative, difference and standardized ratio transformation may weaken the background noise effectively to the spectrum data. Especially using the ratio of the emissivity to the average of 8-14 μm may obviously enhance the correlation between soil moisture and soil emissivity. According to the result of correlation analysis, the 8.237 μm is regarded as the best detecting band for soil moisture content. Moreover,based on the Moisture Diagnostic Index ( MDI) in the 8.194-8.279 μm, the logarithmic model of estimating soil moisture is made.