Research on modeling and self-excited vibration mechanism in magnetic levitation-collision interface coupling system

The modeling and self-excited vibration mechanism in the magnetic levitation-collision interface coupling system are investigated.The effects of the control and interface parameters on the system's stability are analyzed.The frequency range of self-excited vibrations is investigated from the energy point of view.The phenomenon of self-excited vibrations is elaborated with the phase trajectory.The corresponding control strategies are briefly analyzed with respect to the vibration mechanism.The results show that when the levitation objects collide with the mechanical interface,the system's vibration frequency becomes larger with the decrease in the collision gap;when the vibration frequency exceeds the critical frequency,the electromagnetic system continues to provide energy to the system,and the collision interface continuously dissipates energy so that the system enters the self-excited vibration state.

Disturbance rejection tube model predictive levitation control of maglev trains

Magnetic levitation control technology plays a significant role in maglev trains.Designing a controller for the levitation system is challenging due to the strong nonlinearity,open-loop instability,and the need for fast response and security.In this paper,we propose a Disturbance-Observe-based Tube Model Predictive Levitation Control(DO-TMPLC)scheme combined with a feedback linearization strategy for the levitation system.The proposed strategy incorporates state constraints and control input constraints,i.e.,the air gap,the vertical velocity,and the current applied to the coil.A feedback linearization strategy is used to cancel the nonlinearity of the tracking error system.Then,a disturbance observer is implemented to actively compensate for disturbances while a TMPLC controller is employed to alleviate the remaining disturbances.Furthermore,we analyze the recursive feasibility and input-to-state stability of the closed-loop system.The simulation results indicate the efficacy of the proposed control strategy.

Modeling and Validation of Diamagnetic Rotor Levitated by Permanent Magnetics

As an innovative,low-power consuming,and low-stiffness suspension approach,the diamagnetic levitation technique has attracted considerable interest because of its potential applicability in miniaturized mechanical systems.The foundation of a diamagnetic levitation system is mathematical modeling,which is essential for operating performance optimization and stability prediction.However,few studies on systematic mathematical modeling have been reported.In this study,a systematic mathematical model for a disc-shaped diamagnetically levitated rotor on a permanent magnet array is proposed.Based on the proposed model,the magnetic field distribution characteristics,diamagnetic levitation force characteristics(i.e.,levitation height and stiffness),and optimized theoretical conditions for realizing stable levitation are determined.Experiments are conducted to verify the feasibility of the proposed mathematical model.Theoretical predictions and experimental results indicate that increasing the levitation height enlarges the stable region.Moreover,with a further increase in the rotor radius,the stable regions of the rotor gradually diminish and even vanish.Thus,when the levitation height is fixed,a moderate rotor radius permits stable levitation.This study proposes a mathematical modeling method for a diamagnetic levitation system that has potential applications in miniaturized mechanical systems.

Efficient loading of cesium atoms in a magnetic levitated dimple trap

We report a detailed study of magnetically levitated loading of ultracold ^(133)Cs atoms in a dimple trap.The atomic sample was produced in a combined red-detuned optical dipole trap and dimple trap formed by two small waist beams crossing a horizontal plane.The magnetic levitation for the ^(133)Cs atoms forms an effective potential for a large number of atoms in a high spatial density.Dependence of the number of atoms loaded and trapped in the dimple trap on the magnetic field gradient and bias field is in good agreement with the theoretical analysis.This method has been widely used to obtain the Bose–Einstein condensation atoms for many atomic species.

Imaging a force field via an optically levitated nanoparticle array

Levitated optomechanical systems represent an excellent candidate platform for force and acceleration sensing.We propose a force-sensing protocol utilizing an optically levitated nanoparticle array.In our scheme,N nanoparticles are trapped in an optical cavity using holographic optical tweezers.An external laser drives the cavity,exciting N cavity modes interacting simultaneously with the N nanoparticles.The optomechanical interaction encodes the information of the force acting on each nanoparticle onto the intracavity photons,which can be detected directly at the output ports of the cavity.Consequently,our protocol enables real-time imaging of a force field.

Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

Non-contact wide-field viewing system-assisted scleral buckling surgery for retinal detachment in silicone oilfilled eyes

AIM:To evaluate scleral buckling(SB)surgery using a noncontact wide-field viewing system and 23-gauge intraocular illumination for the treatment of rhegmatogenous retinal detachment in silicone oil(SO)-filled eyes.METHODS:Totally 9 patients(9 eyes)with retinal detachment in SO-filled eyes were retrospectively analyzed.All patients underwent non-contact wide-field viewing system-assisted buckling surgery with 23-gauge intraocular illumination.SO was removed at an appropriate time based on recovery.The patients were followed up for at least 3mo after SO removal.Retinal reattachment,complications,visual acuity and intraocular pressure(IOP)before and after surgery were observed.RESULTS:Patients were followed up for a mean of 8.22mo(3-22mo)after SO removal.All patients had retinal reattachment.At the final follow-up,visual acuity showed improvement for 8 patients,and no change for 1 patient.The IOP was high in 3 patients before surgery,but it stabilized after treatment;it was not affected in the other patients.None of the patients had infections,hemorrhage,anterior ischemia,or any other complication.CONCLUSION:This new non-contact wide-field viewing system-assisted SB surgery with 23-gauge intraocular illumination is effective and safe for retinal detachment in SO-filled eyes.

Video-Based Deception Detection with Non-Contact Heart Rate Monitoring and Multi-Modal Feature Selection

Deception detection plays a crucial role in criminal investigation.Videos contain a wealth of information regarding apparent and physiological changes in individuals,and thus can serve as an effective means of deception detection.In this paper,we investigate video-based deception detection considering both apparent visual features such as eye gaze,head pose and facial action unit(AU),and non-contact heart rate detected by remote photoplethysmography(rPPG)technique.Multiple wrapper-based feature selection methods combined with the K-nearest neighbor(KNN)and support vector machine(SVM)classifiers are employed to screen the most effective features for deception detection.We evaluate the performance of the proposed method on both a self-collected physiological-assisted visual deception detection(PV3D)dataset and a public bag-oflies(BOL)dataset.Experimental results demonstrate that the SVM classifier with symbiotic organisms search(SOS)feature selection yields the best overall performance,with an area under the curve(AUC)of 83.27%and accuracy(ACC)of 83.33%for PV3D,and an AUC of 71.18%and ACC of 70.33%for BOL.This demonstrates the stability and effectiveness of the proposed method in video-based deception detection tasks.

Experimental Study of the Effect ofWater Salinity on the Parameters of an Equilibrium Droplet Cluster Levitating over aWater Layer

New experimental results,which are important for the potential use of small levitating droplets as biochemical microreactors,are reported.It is shown that the combination of infrared heating and reduced evaporation of saline water under the droplet cluster is sufficient to produce equilibriumsaltwater droplets over a wide temperature range.The resulting universal dependence of droplet size on temperature simplifies the choice of optimal conditions for generating stable droplet clusters with droplets of the desired size.A physical analysis of the experimental results on the equilibrium size of saltwater droplets makes it possible to separate the effects related to the salinity of the water layer under the droplet cluster from the effects related to the reduction of water evaporation from the water droplets.This is expected to be important for further studies of heat transfer and diffusion in layers of evaporating solutions and condensed droplets.

Levitation现象研究进展

漂浮(Levitation)现象可以定义为这样一种稳定情况,即在垂直振荡流体中颗粒的重力被完全抵消而仅在某一固定位置附近做振荡运动。作者分析了国内外研究现状,综述了以往学者对该现象进行的实验研究、理论分析以及数值模拟等工作。通过对Levitation现象研究文献的综述,总结了以往学者的一些研究成果,分析了他们所开展的研究之间的共性和分歧,在此基础上提出了目前对Levitation现象研究需解决的问题并对Levitation现象今后研究需要进一步解决的问题做了探讨。

ELECTROMAGNETIC MODEL OF LEVITATION MELTING WITH COLD CRUCIBLE

ＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＭＯＤＥＬＯＦＬＥＶＩＴＡＴＩＯＮＭＥＬＴＩＮＧＷＩＴＨＣＯＬＤＣＲＵＣＩＢＬＥＤｅｎｇＫａｎｇ；ＺｈｏｕＹｕｅｍｉｎｇ；ＲｅｎＺｈｏｎｇｍｉｎｇ；ＺｈｕＳｈｏｕｊｕｎ；ＷｅｉＪｉｈｅ；ＪｉａｎｇＧｕｏｃｈａｎｇ（Ｓｈａ...

Physical Properties of Liquid Terbium Measured by Levitation Techniques

To understand the nature and behavior of rare earth metals in their liquid phases, accurate values of their physical properties are essential. However, to measure their physical properties, the samples should be maintained in liquid phases for prolonged time, and this raises a formidable challenge. This is mainly explained by their high melting temperatures （e.g., 1629 K for Tb）, high vapor pressure, and the risk of melt contamination with a crucible or support. An electrostatic levitation furnace alleviated these difficulties and allowed the determination of density, surface tension, and viscosity of several metals above their melting temperature. Here, first, the levitation furnace facility and the noncontact diagnostic procedures were briefly discussed, followed by the explanation of their thermophysical property measurements over wide temperature ranges. The density was obtained using an ultraviolet-based imaging technique that allowed excellent illumination, even at elevated temperatures. Over the 1615 to 1880 K temperature span, the density measurements could be expressed as p（T） =7.84 × 10^3 -0.47 （T - Tm） （kg · m^-3） with Tm = 1629 K, yielding a volume expansion coefficient a（T） = 6.0 × 10^-5 （K^-1）. In addition, the surface tension and the viscosity could be determined by inducing a drop oscillation to a molten sample. Using this technique, the surface tension data could be expressed as σ（T） = 8.93 × 10^2 - 0.10 （T - Tm）（mN· m^-1） and those for viscosity as η（T） =0.583 exp [4.1 × 10^4/（RT）] （MPa·s） over the 1690 to 1980 K temperature range

THE ELECTROMAGNETIC FIELD CALCULATION AND ANALYSIS OF LEVITATION MELTING WITH COLD CRUCIBLE

In this paper, using the quasi-3D coupled current method, the influences of structure of cold crucible, the power frequency, the electricity property of melt, the coil position and current on the electromagnetic field (EMF) and the levitation characteristics in the melting processes are analyzed. It is shown that in the processes of levitation melting with cold crucible, the power frequency and cold crucible structure are the decisive factors for the ability of magnetic flux penetrating into cold crucible. The magnetic flux density in cold crucible is reduced as the increasing of power frequency, and this tendency becomes stronger when the power frequency is higher than 100kHz. The segmented structure of cold crucible can reduce the induction eddy in itself effectively, and the higher the power frequency is, the better the result is. So, a cold crucible can be segmented into 16-20 sectors for high frequency electromagnetic field and/or 8-12 sectors for lower frequency one. It is also shown that the levitation force of melting charge is related to coil current as a parabolic function.

A practical robust nonlinear controller for maglev levitation system

In order to explore the precise dynamic response of the maglev train and verify the validity of proposed controller,a maglev guideway-electromagnet-air spring-cabin coupled model is developed in the first step.Based on the coupled model,the stresses of the modules are analyzed,and it is pointed out that the inherent nonlinearity,the inner coupling,misalignments between the sensors and actuators,and external disturbances are the main issues that should be considered for the maglev engineering.Furthermore,a feedback linearization controller based on the mathematical model of a maglev module is derived,in which the nonlinearity,coupling and misalignments are taken into account.Then,to attenuate the effect of external disturbances,a disturbance observer is proposed and the dynamics of the estimation error is analyzed using the input-to-state stability theory.It shows that the error is negligible under a low-frequency disturbance.However,at the high-frequency range,the error is unacceptable and the disturbances can not be compensated in time,which lead to over designed fluctuations of levitation gap,even a clash between the upper surface of electromagnet and lower surface of guideway.To solve this problem,a novel nonlinear acceleration feedback is put forward to enhancing the attenuation ability of fast varying disturbances.Finally,numerical comparisons show that the proposed controller outperforms the traditional feedback linearization controller and maintains good robustness under disturbances.

NUMERICAL SIMULATION OF ALTERNATIVE HORIZONTAL LEVITATION ELECTROMAGNETIC CONTINUOUS CASTING（Ⅱ）

ＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＯＦＡＬＴＥＲＮＡＴＩＶＥＨＯＲＩＺＯＮＴＡＬＬＥＶＩＴＡＴＩＯＮＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＣＯＮＴＩＮＵＯＵＳＣＡＳＴＩＮＧ（Ⅱ）￥ＺｈｕＳｈｏｕｊｕｎ；ＲｅｎＺｈｏｎｇｍｉｎｇ；ＤｅｎｇＫａｎｇ；Ｊｉａｎ...

A practical nonlinear controller for levitation system with magnetic flux feedback

This work proposes a practical nonlinear controller for the MIMO levitation system. Firstly, the mathematical model of levitation modules is developed and the advantages of the control scheme with magnetic flux feedback are analyzed when compared with the current feedback. Then, a backstepping controller with magnetic flux feedback based on the mathematical model of levitation module is developed. To obtain magnetic flux signals for full-size maglev system, a physical method with induction coils installed to winding of the electromagnet is developed. Furthermore, to avoid its hardware addition, a novel conception of virtual magnetic flux feedback is proposed. To demonstrate the feasibility of the proposed controller, the nonlinear dynamic model of full-size maglev train with quintessential details is developed. Based on the nonlinear model, the numerical comparisons and related experimental validations are carried out. Finally, results illustrating closed-loop performance are provided.

Vacuum Electromagnetic Levitation Melting and Undercooling of Peritectic Terfenol-D

For the first time, the undercooling of a magnetostrictive material a near peritectic Tb 0.27 Dy 0.73 Fe 1.90 alloy was realized by vacuum electromagnetic levitation melting and 60 K undercooling was obtained. There is one recalescence behavior during solidification of the undercooled melt,which can attribute to the priority precipitation of REFe 2 phase instead of REFe 3 phase, due to preferential nucleation and higher crystal growth rate of REFe 2 phase and the suppression of peritectic reaction. According to the crystal structural characteristics of REFe 2 and REFe 3, REFe 2 is a Laves phase intermetallics with MgCu 2 type structure, which has similar polytetrahedral structure with short range ordered structure in undercooled melt and has lower potential barrier for nucleation than that of REFe 3,which lead to the preferential nucleation of REFe 2 phase directly from the undercooled melt. Also, the similarity of structures between REFe 2 phase and undercooled melt leads to higher crystal growth rate of REFe 2 phase than that of REFe 3.

Levitation mechanism modelling for maglev transportation system

A novel maglev transportation system was proposed for large travel range ultra precision motion.The system consists of a levitation subsystem and a propulsion subsystem.During the propulsion subsystem driving the moving platform along the guideway,the levitation subsystem uses six pairs of electromagnets to steadily suspend the moving platform over the guideway.The model of the levitation system,which is a typical nonlinear multi-input multi-output coupling system and has many inner nonlinear coupling characteristics,was deduced.For testifying the model,the levitation mechanism was firstly controlled by proportional-integral-differential(PID) control,and then a lot of input-output data were collected for model parameter identification.The least-square parameter identification method was used.The identification results prove that the model is feasible and suitable for the real system.

A novel superconducting magnetic levitation method to support the laser fusion capsule by using permanent magnets

A novel magnetic levitation support method is proposed, which can relieve the perturbation caused by traditional support methods andprovide more accurate position control of the capsule. This method can keep the perfect symmetry of the octahedral spherical hohlraum and hasthe characteristics in stability, tunability and simplicity. It is also favorable that all the results, such as supporting forces acting on the super-conducting capsule, are calculated analytically, and numerical simulations are performed to verify these results. A typical realistic design isproposed and discussed in detail. The superconducting coating material is suggested, and the required superconducting properties are listed.Damped oscillation of the floating capsule in thin helium gas is discussed, and the restoring time is estimated.

Structure analysis of levitation chassis of medium-to-low speed maglev vehicles based on left-right decoupling

Levitation chassis, as an extremely important component of maglev vehicles, provides functions of transmitting levitation force and steering force, and directly affects the safety performance of the vehicle. Based on the vertical dynamics model of the levitation chassis, kinetic equations of the model are established, and a simulation program is designed to analyze the structural decoupling function of the chassis, especially under the influence of elastic constraints between the left and right modules, which are exclusively owned by maglev vehicles. A finite element model of the levitation chassis based on left-right decoupling is constructed. Analysis results of the model show that the mechanical properties of the chassis tailored for the vehicle meet the design requirements, and the stiffness and strength is adequate to bear the weight of the whole vehicle.