We review the fundamental properties and significant issues related to Cu/graphite composites.In particular,recent research on the interfacial modification of Cu/graphite composites is addressed,including the metal-mo...We review the fundamental properties and significant issues related to Cu/graphite composites.In particular,recent research on the interfacial modification of Cu/graphite composites is addressed,including the metal-modified layer,carbide-modified layer,and combined modified layer.Additionally,we propose the use of ternary layered carbide as an interface modification layer for Cu/graphite composites.展开更多
A new complex, [Ni2（L）4（H2O）8]（1, L1 = 4-（1H-imidazol-4-yl）benzoic acid）, has been hydrothermally prepared and characterized by single-crystal X-ray diffraction, IR spectroscopy, elemental analysis and PXRD. C...A new complex, [Ni2（L）4（H2O）8]（1, L1 = 4-（1H-imidazol-4-yl）benzoic acid）, has been hydrothermally prepared and characterized by single-crystal X-ray diffraction, IR spectroscopy, elemental analysis and PXRD. Complex 1 crystallizes in monoclinic, space group P21/c with α = 22.281（2）, b = 7.3959（7）, c = 24.978（3） ？, β = 90.876（10）, V = 4115.6（7） ？3, Z = 8, C20H22N4O8Ni, Mr = 505.13, Dc = 1.630 g/cm3, μ = 1.001 mm-1, S = 1.080, F（000） = 2096, the final R = 0.452 and wR = 0.1152 for 9380 observed reflections （I 〉 2σ（I））. The result of X-ray diffraction analysis revealed three different kinds of Ni（II） centre mononuclear molecules in the asymmetric unit. The independent mononuclear units are bridged to form a three-dimensional supramolecular polymer by extensive hydrogen bonds and C–H… non-covalent bonding interactions.展开更多
Based on the feasibility of isothermal superplastic solid state bonding of 40Cr and Cr12MoV steels, the surfaces of both steels to be bonded were ultra-fined through high frequency hardening, then the superplastic sol...Based on the feasibility of isothermal superplastic solid state bonding of 40Cr and Cr12MoV steels, the surfaces of both steels to be bonded were ultra-fined through high frequency hardening, then the superplastic solid state bonding were conducted, the microstructure and fracture surface of bonded joint were observed and analysed, and bonding mechanisms was researched. The experimental results show that with the sample surfaces of 4OCr and Cr12MoV steels after the high frequeney hardening, under the prepressing stress of 56. 6 MPa, initidl strain rate of 1.5 × 10^ -2 min^-1 and at the bonding temperature of800 -820℃, the superplastic solid state bonding can be carried out in about 3.5 min, and the joint strength is up to that of 40Cr steel base metal and the radial expansion ratio of the joint does not exceed 6%. The saperplastic solid state bonding parameter of both steels is within the ranges of the isothermal compressive superplastic deformation of Cr12MoV steel, and the deformation in Cr12MoV steel side near the interfacial zone of joint presents the characteristic of superplasticity. In bonding process, the atoms in two sides of joint interface have diffused each other.展开更多
It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is adva...It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.展开更多
To simplify the composite propellant formulation and address the current issue of the single-functionality present in existing additives,the multi-cyano,amine-based polybutadiene(AEHTPB-CN)was prepared based on AEHTPB...To simplify the composite propellant formulation and address the current issue of the single-functionality present in existing additives,the multi-cyano,amine-based polybutadiene(AEHTPB-CN)was prepared based on AEHTPB by adopting appropriate synthesis strategies.By replacing 10% of HTPB binder in the propellant formulation,it can effectively enhance the interfacial bond strength between the propellant binder matrix and solid fillers(AP(ammonium perchlorate)and RDX(cyclotrimethylene-trinitramine)),the mechanical properties of the HTPB/AP/RDX/Al propellant were superior to blank control propellant with an improvement of 35.4% in tensile strength,62.0% enhancement in elongation at break,and reduce the propellant burn rate by 10.7% with any energy loss.The function mechanism of AEHTPB-CN was systematically elucidated through experiments and computer simulation techniques.The results show that the tertiary amine group in AEHTPB-CN can react with AP to form ammonium ionic bonds,and the hydroxyl and cyano groups can form hydrogen bonding interactions with AP,which enables AEHTPB-CN to be firmly adsorbed on the AP surface through chemical and physical interactions.For RDX,the interfacial bonding effect of AEHTPB-CN is attributed to their ability to form C-H···N≡C weak hydrogen bonding interaction between the cyano group and RDX methylene group.展开更多
基金Funded by Changsha Natural Science Foundation(No.kq2208270)。
文摘We review the fundamental properties and significant issues related to Cu/graphite composites.In particular,recent research on the interfacial modification of Cu/graphite composites is addressed,including the metal-modified layer,carbide-modified layer,and combined modified layer.Additionally,we propose the use of ternary layered carbide as an interface modification layer for Cu/graphite composites.
基金supported by the National Natural Science Foundation of China(Nos.21171040 and 21302019)
文摘A new complex, [Ni2（L）4（H2O）8]（1, L1 = 4-（1H-imidazol-4-yl）benzoic acid）, has been hydrothermally prepared and characterized by single-crystal X-ray diffraction, IR spectroscopy, elemental analysis and PXRD. Complex 1 crystallizes in monoclinic, space group P21/c with α = 22.281（2）, b = 7.3959（7）, c = 24.978（3） ？, β = 90.876（10）, V = 4115.6（7） ？3, Z = 8, C20H22N4O8Ni, Mr = 505.13, Dc = 1.630 g/cm3, μ = 1.001 mm-1, S = 1.080, F（000） = 2096, the final R = 0.452 and wR = 0.1152 for 9380 observed reflections （I 〉 2σ（I））. The result of X-ray diffraction analysis revealed three different kinds of Ni（II） centre mononuclear molecules in the asymmetric unit. The independent mononuclear units are bridged to form a three-dimensional supramolecular polymer by extensive hydrogen bonds and C–H… non-covalent bonding interactions.
基金This research was supported by National Natural Science Foundation of China （ No. 50774029） and the Foundation of Henan Province Outstanding Youth Scientist （ No. 074100510011 ）.
文摘Based on the feasibility of isothermal superplastic solid state bonding of 40Cr and Cr12MoV steels, the surfaces of both steels to be bonded were ultra-fined through high frequency hardening, then the superplastic solid state bonding were conducted, the microstructure and fracture surface of bonded joint were observed and analysed, and bonding mechanisms was researched. The experimental results show that with the sample surfaces of 4OCr and Cr12MoV steels after the high frequeney hardening, under the prepressing stress of 56. 6 MPa, initidl strain rate of 1.5 × 10^ -2 min^-1 and at the bonding temperature of800 -820℃, the superplastic solid state bonding can be carried out in about 3.5 min, and the joint strength is up to that of 40Cr steel base metal and the radial expansion ratio of the joint does not exceed 6%. The saperplastic solid state bonding parameter of both steels is within the ranges of the isothermal compressive superplastic deformation of Cr12MoV steel, and the deformation in Cr12MoV steel side near the interfacial zone of joint presents the characteristic of superplasticity. In bonding process, the atoms in two sides of joint interface have diffused each other.
文摘It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.
文摘To simplify the composite propellant formulation and address the current issue of the single-functionality present in existing additives,the multi-cyano,amine-based polybutadiene(AEHTPB-CN)was prepared based on AEHTPB by adopting appropriate synthesis strategies.By replacing 10% of HTPB binder in the propellant formulation,it can effectively enhance the interfacial bond strength between the propellant binder matrix and solid fillers(AP(ammonium perchlorate)and RDX(cyclotrimethylene-trinitramine)),the mechanical properties of the HTPB/AP/RDX/Al propellant were superior to blank control propellant with an improvement of 35.4% in tensile strength,62.0% enhancement in elongation at break,and reduce the propellant burn rate by 10.7% with any energy loss.The function mechanism of AEHTPB-CN was systematically elucidated through experiments and computer simulation techniques.The results show that the tertiary amine group in AEHTPB-CN can react with AP to form ammonium ionic bonds,and the hydroxyl and cyano groups can form hydrogen bonding interactions with AP,which enables AEHTPB-CN to be firmly adsorbed on the AP surface through chemical and physical interactions.For RDX,the interfacial bonding effect of AEHTPB-CN is attributed to their ability to form C-H···N≡C weak hydrogen bonding interaction between the cyano group and RDX methylene group.
